diff options
Diffstat (limited to 'drivers/thermal/mtk_thermal.c')
| -rw-r--r-- | drivers/thermal/mtk_thermal.c | 88 |
1 files changed, 78 insertions, 10 deletions
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 7737f14846f9..1e61c09153c9 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -3,6 +3,7 @@ * Author: Hanyi Wu <hanyi.wu@mediatek.com> * Sascha Hauer <s.hauer@pengutronix.de> * Dawei Chien <dawei.chien@mediatek.com> + * Louis Yu <louis.yu@mediatek.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -111,9 +112,10 @@ /* * Layout of the fuses providing the calibration data - * These macros could be used for both MT8173 and MT2701. - * MT8173 has five sensors and need five VTS calibration data, - * and MT2701 has three sensors and need three VTS calibration data. + * These macros could be used for MT8173, MT2701, and MT2712. + * MT8173 has 5 sensors and needs 5 VTS calibration data. + * MT2701 has 3 sensors and needs 3 VTS calibration data. + * MT2712 has 4 sensors and needs 4 VTS calibration data. */ #define MT8173_CALIB_BUF0_VALID BIT(0) #define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) @@ -124,6 +126,8 @@ #define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff) #define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) #define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) +#define MT8173_CALIB_BUF0_O_SLOPE_SIGN(x) (((x) >> 7) & 0x1) +#define MT8173_CALIB_BUF1_ID(x) (((x) >> 9) & 0x1) /* MT2701 thermal sensors */ #define MT2701_TS1 0 @@ -136,11 +140,26 @@ /* The total number of temperature sensors in the MT2701 */ #define MT2701_NUM_SENSORS 3 -#define THERMAL_NAME "mtk-thermal" - /* The number of sensing points per bank */ #define MT2701_NUM_SENSORS_PER_ZONE 3 +/* MT2712 thermal sensors */ +#define MT2712_TS1 0 +#define MT2712_TS2 1 +#define MT2712_TS3 2 +#define MT2712_TS4 3 + +/* AUXADC channel 11 is used for the temperature sensors */ +#define MT2712_TEMP_AUXADC_CHANNEL 11 + +/* The total number of temperature sensors in the MT2712 */ +#define MT2712_NUM_SENSORS 4 + +/* The number of sensing points per bank */ +#define MT2712_NUM_SENSORS_PER_ZONE 4 + +#define THERMAL_NAME "mtk-thermal" + struct mtk_thermal; struct thermal_bank_cfg { @@ -215,6 +234,21 @@ static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; +/* MT2712 thermal sensor data */ +static const int mt2712_bank_data[MT2712_NUM_SENSORS] = { + MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4 +}; + +static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = { + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 +}; + +static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { + TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 +}; + +static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; + /** * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 @@ -278,6 +312,31 @@ static const struct mtk_thermal_data mt2701_thermal_data = { }; /** + * The MT2712 thermal controller has one bank, which can read up to + * four temperature sensors simultaneously. The MT2712 has a total of 4 + * temperature sensors. + * + * The thermal core only gets the maximum temperature of this one bank, + * so the bank concept wouldn't be necessary here. However, the SVS (Smart + * Voltage Scaling) unit makes its decisions based on the same bank + * data. + */ +static const struct mtk_thermal_data mt2712_thermal_data = { + .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL, + .num_banks = 1, + .num_sensors = MT2712_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 4, + .sensors = mt2712_bank_data, + }, + }, + .msr = mt2712_msr, + .adcpnp = mt2712_adcpnp, + .sensor_mux_values = mt2712_mux_values, +}; + +/** * raw_to_mcelsius - convert a raw ADC value to mcelsius * @mt: The thermal controller * @raw: raw ADC value @@ -552,7 +611,11 @@ static int mtk_thermal_get_calibration_data(struct device *dev, mt->vts[MT8173_TS4] = MT8173_CALIB_BUF2_VTS_TS4(buf[2]); mt->vts[MT8173_TSABB] = MT8173_CALIB_BUF2_VTS_TSABB(buf[2]); mt->degc_cali = MT8173_CALIB_BUF0_DEGC_CALI(buf[0]); - mt->o_slope = MT8173_CALIB_BUF0_O_SLOPE(buf[0]); + if (MT8173_CALIB_BUF1_ID(buf[1]) & + MT8173_CALIB_BUF0_O_SLOPE_SIGN(buf[0])) + mt->o_slope = -MT8173_CALIB_BUF0_O_SLOPE(buf[0]); + else + mt->o_slope = MT8173_CALIB_BUF0_O_SLOPE(buf[0]); } else { dev_info(dev, "Device not calibrated, using default calibration values\n"); } @@ -571,6 +634,10 @@ static const struct of_device_id mtk_thermal_of_match[] = { { .compatible = "mediatek,mt2701-thermal", .data = (void *)&mt2701_thermal_data, + }, + { + .compatible = "mediatek,mt2712-thermal", + .data = (void *)&mt2712_thermal_data, }, { }, }; @@ -645,16 +712,16 @@ static int mtk_thermal_probe(struct platform_device *pdev) return -EINVAL; } + ret = device_reset(&pdev->dev); + if (ret) + return ret; + ret = clk_prepare_enable(mt->clk_auxadc); if (ret) { dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); return ret; } - ret = device_reset(&pdev->dev); - if (ret) - goto err_disable_clk_auxadc; - ret = clk_prepare_enable(mt->clk_peri_therm); if (ret) { dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); @@ -705,6 +772,7 @@ static struct platform_driver mtk_thermal_driver = { module_platform_driver(mtk_thermal_driver); +MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>"); MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>"); MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>"); |