diff options
Diffstat (limited to 'drivers/thermal/mediatek/lvts_thermal.c')
| -rw-r--r-- | drivers/thermal/mediatek/lvts_thermal.c | 71 |
1 files changed, 44 insertions, 27 deletions
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 1997e91bb3be..ae063d1bc95f 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -65,7 +65,6 @@ #define LVTS_HW_FILTER 0x0 #define LVTS_TSSEL_CONF 0x13121110 #define LVTS_CALSCALE_CONF 0x300 -#define LVTS_MONINT_CONF 0x8300318C #define LVTS_MONINT_OFFSET_SENSOR0 0xC #define LVTS_MONINT_OFFSET_SENSOR1 0x180 @@ -91,8 +90,6 @@ #define LVTS_MSR_READ_TIMEOUT_US 400 #define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) -#define LVTS_HW_TSHUT_TEMP 105000 - #define LVTS_MINIMUM_THRESHOLD 20000 static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; @@ -145,7 +142,6 @@ struct lvts_ctrl { struct lvts_sensor sensors[LVTS_SENSOR_MAX]; const struct lvts_data *lvts_data; u32 calibration[LVTS_SENSOR_MAX]; - u32 hw_tshut_raw_temp; u8 valid_sensor_mask; int mode; void __iomem *base; @@ -213,6 +209,13 @@ static const struct debugfs_reg32 lvts_regs[] = { LVTS_DEBUG_FS_REGS(LVTS_CLKEN), }; +static void lvts_debugfs_exit(void *data) +{ + struct lvts_domain *lvts_td = data; + + debugfs_remove_recursive(lvts_td->dom_dentry); +} + static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td) { struct debugfs_regset32 *regset; @@ -245,12 +248,7 @@ static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td) debugfs_create_regset32("registers", 0400, dentry, regset); } - return 0; -} - -static void lvts_debugfs_exit(struct lvts_domain *lvts_td) -{ - debugfs_remove_recursive(lvts_td->dom_dentry); + return devm_add_action_or_reset(dev, lvts_debugfs_exit, lvts_td); } #else @@ -261,8 +259,6 @@ static inline int lvts_debugfs_init(struct device *dev, return 0; } -static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { } - #endif static int lvts_raw_to_temp(u32 raw_temp, int temp_factor) @@ -837,14 +833,6 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td, */ lvts_ctrl[i].mode = lvts_data->lvts_ctrl[i].mode; - /* - * The temperature to raw temperature must be done - * after initializing the calibration. - */ - lvts_ctrl[i].hw_tshut_raw_temp = - lvts_temp_to_raw(LVTS_HW_TSHUT_TEMP, - lvts_data->temp_factor); - lvts_ctrl[i].low_thresh = INT_MIN; lvts_ctrl[i].high_thresh = INT_MIN; } @@ -860,6 +848,32 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td, return 0; } +static void lvts_ctrl_monitor_enable(struct device *dev, struct lvts_ctrl *lvts_ctrl, bool enable) +{ + /* + * Bitmaps to enable each sensor on filtered mode in the MONCTL0 + * register. + */ + static const u8 sensor_filt_bitmap[] = { BIT(0), BIT(1), BIT(2), BIT(3) }; + u32 sensor_map = 0; + int i; + + if (lvts_ctrl->mode != LVTS_MSR_FILTERED_MODE) + return; + + if (enable) { + lvts_for_each_valid_sensor(i, lvts_ctrl) + sensor_map |= sensor_filt_bitmap[i]; + } + + /* + * Bits: + * 9: Single point access flow + * 0-3: Enable sensing point 0-3 + */ + writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); +} + /* * At this point the configuration register is the only place in the * driver where we write multiple values. Per hardware constraint, @@ -893,7 +907,6 @@ static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) * 10 : Selected sensor with bits 19-18 * 11 : Reserved */ - writel(BIT(16), LVTS_PROTCTL(lvts_ctrl->base)); /* * LVTS_PROTTA : Stage 1 temperature threshold @@ -906,8 +919,8 @@ static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) * * writel(0x0, LVTS_PROTTA(lvts_ctrl->base)); * writel(0x0, LVTS_PROTTB(lvts_ctrl->base)); + * writel(0x0, LVTS_PROTTC(lvts_ctrl->base)); */ - writel(lvts_ctrl->hw_tshut_raw_temp, LVTS_PROTTC(lvts_ctrl->base)); /* * LVTS_MONINT : Interrupt configuration register @@ -915,7 +928,7 @@ static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) * The LVTS_MONINT register layout is the same as the LVTS_MONINTSTS * register, except we set the bits to enable the interrupt. */ - writel(LVTS_MONINT_CONF, LVTS_MONINT(lvts_ctrl->base)); + writel(0, LVTS_MONINT(lvts_ctrl->base)); return 0; } @@ -1339,8 +1352,6 @@ static void lvts_remove(struct platform_device *pdev) for (i = 0; i < lvts_td->num_lvts_ctrl; i++) lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); - - lvts_debugfs_exit(lvts_td); } static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = { @@ -1381,8 +1392,11 @@ static int lvts_suspend(struct device *dev) lvts_td = dev_get_drvdata(dev); - for (i = 0; i < lvts_td->num_lvts_ctrl; i++) + for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { + lvts_ctrl_monitor_enable(dev, &lvts_td->lvts_ctrl[i], false); + usleep_range(100, 200); lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); + } clk_disable_unprepare(lvts_td->clk); @@ -1400,8 +1414,11 @@ static int lvts_resume(struct device *dev) if (ret) return ret; - for (i = 0; i < lvts_td->num_lvts_ctrl; i++) + for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], true); + usleep_range(100, 200); + lvts_ctrl_monitor_enable(dev, &lvts_td->lvts_ctrl[i], true); + } return 0; } |