diff options
Diffstat (limited to 'drivers/tee/optee/optee_msg.h')
| -rw-r--r-- | drivers/tee/optee/optee_msg.h | 156 |
1 files changed, 8 insertions, 148 deletions
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index b1f1e902b19b..81ff593ac4ec 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ /* - * Copyright (c) 2015-2019, Linaro Limited + * Copyright (c) 2015-2021, Linaro Limited */ #ifndef _OPTEE_MSG_H #define _OPTEE_MSG_H @@ -12,11 +12,9 @@ * This file defines the OP-TEE message protocol used to communicate * with an instance of OP-TEE running in secure world. * - * This file is divided into three sections. + * This file is divided into two sections. * 1. Formatting of messages. * 2. Requests from normal world - * 3. Requests from secure world, Remote Procedure Call (RPC), handled by - * tee-supplicant. */ /***************************************************************************** @@ -54,8 +52,8 @@ * Every entry in buffer should point to a 4k page beginning (12 least * significant bits must be equal to zero). * - * 12 least significant bints of optee_msg_param.u.tmem.buf_ptr should hold page - * offset of the user buffer. + * 12 least significant bits of optee_msg_param.u.tmem.buf_ptr should hold + * page offset of user buffer. * * So, entries should be placed like members of this structure: * @@ -176,17 +174,9 @@ struct optee_msg_param { * @params: the parameters supplied to the OS Command * * All normal calls to Trusted OS uses this struct. If cmd requires further - * information than what these field holds it can be passed as a parameter + * information than what these fields hold it can be passed as a parameter * tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding - * attrs field). All parameters tagged as meta has to come first. - * - * Temp memref parameters can be fragmented if supported by the Trusted OS - * (when optee_smc.h is bearer of this protocol this is indicated with - * OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM). If a logical memref parameter is - * fragmented then has all but the last fragment the - * OPTEE_MSG_ATTR_FRAGMENT bit set in attrs. Even if a memref is fragmented - * it will still be presented as a single logical memref to the Trusted - * Application. + * attrs field). All parameters tagged as meta have to come first. */ struct optee_msg_arg { u32 cmd; @@ -290,15 +280,12 @@ struct optee_msg_arg { * OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The * information is passed as: * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_TMEM_INPUT - * [| OPTEE_MSG_ATTR_FRAGMENT] + * [| OPTEE_MSG_ATTR_NONCONTIG] * [in] param[0].u.tmem.buf_ptr physical address (of first fragment) * [in] param[0].u.tmem.size size (of first fragment) * [in] param[0].u.tmem.shm_ref holds shared memory reference - * ... - * The shared memory can optionally be fragmented, temp memrefs can follow - * each other with all but the last with the OPTEE_MSG_ATTR_FRAGMENT bit set. * - * OPTEE_MSG_CMD_UNREGISTER_SHM unregisteres a previously registered shared + * OPTEE_MSG_CMD_UNREGISTER_SHM unregisters a previously registered shared * memory reference. The information is passed as: * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_RMEM_INPUT * [in] param[0].u.rmem.shm_ref holds shared memory reference @@ -313,131 +300,4 @@ struct optee_msg_arg { #define OPTEE_MSG_CMD_UNREGISTER_SHM 5 #define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004 -/***************************************************************************** - * Part 3 - Requests from secure world, RPC - *****************************************************************************/ - -/* - * All RPC is done with a struct optee_msg_arg as bearer of information, - * struct optee_msg_arg::arg holds values defined by OPTEE_MSG_RPC_CMD_* below - * - * RPC communication with tee-supplicant is reversed compared to normal - * client communication desribed above. The supplicant receives requests - * and sends responses. - */ - -/* - * Load a TA into memory, defined in tee-supplicant - */ -#define OPTEE_MSG_RPC_CMD_LOAD_TA 0 - -/* - * Reserved - */ -#define OPTEE_MSG_RPC_CMD_RPMB 1 - -/* - * File system access, defined in tee-supplicant - */ -#define OPTEE_MSG_RPC_CMD_FS 2 - -/* - * Get time - * - * Returns number of seconds and nano seconds since the Epoch, - * 1970-01-01 00:00:00 +0000 (UTC). - * - * [out] param[0].u.value.a Number of seconds - * [out] param[0].u.value.b Number of nano seconds. - */ -#define OPTEE_MSG_RPC_CMD_GET_TIME 3 - -/* - * Wait queue primitive, helper for secure world to implement a wait queue. - * - * If secure world need to wait for a secure world mutex it issues a sleep - * request instead of spinning in secure world. Conversely is a wakeup - * request issued when a secure world mutex with a thread waiting thread is - * unlocked. - * - * Waiting on a key - * [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP - * [in] param[0].u.value.b wait key - * - * Waking up a key - * [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP - * [in] param[0].u.value.b wakeup key - */ -#define OPTEE_MSG_RPC_CMD_WAIT_QUEUE 4 -#define OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP 0 -#define OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP 1 - -/* - * Suspend execution - * - * [in] param[0].value .a number of milliseconds to suspend - */ -#define OPTEE_MSG_RPC_CMD_SUSPEND 5 - -/* - * Allocate a piece of shared memory - * - * Shared memory can optionally be fragmented, to support that additional - * spare param entries are allocated to make room for eventual fragments. - * The spare param entries has .attr = OPTEE_MSG_ATTR_TYPE_NONE when - * unused. All returned temp memrefs except the last should have the - * OPTEE_MSG_ATTR_FRAGMENT bit set in the attr field. - * - * [in] param[0].u.value.a type of memory one of - * OPTEE_MSG_RPC_SHM_TYPE_* below - * [in] param[0].u.value.b requested size - * [in] param[0].u.value.c required alignment - * - * [out] param[0].u.tmem.buf_ptr physical address (of first fragment) - * [out] param[0].u.tmem.size size (of first fragment) - * [out] param[0].u.tmem.shm_ref shared memory reference - * ... - * [out] param[n].u.tmem.buf_ptr physical address - * [out] param[n].u.tmem.size size - * [out] param[n].u.tmem.shm_ref shared memory reference (same value - * as in param[n-1].u.tmem.shm_ref) - */ -#define OPTEE_MSG_RPC_CMD_SHM_ALLOC 6 -/* Memory that can be shared with a non-secure user space application */ -#define OPTEE_MSG_RPC_SHM_TYPE_APPL 0 -/* Memory only shared with non-secure kernel */ -#define OPTEE_MSG_RPC_SHM_TYPE_KERNEL 1 - -/* - * Free shared memory previously allocated with OPTEE_MSG_RPC_CMD_SHM_ALLOC - * - * [in] param[0].u.value.a type of memory one of - * OPTEE_MSG_RPC_SHM_TYPE_* above - * [in] param[0].u.value.b value of shared memory reference - * returned in param[0].u.tmem.shm_ref - * above - */ -#define OPTEE_MSG_RPC_CMD_SHM_FREE 7 - -/* - * Access a device on an i2c bus - * - * [in] param[0].u.value.a mode: RD(0), WR(1) - * [in] param[0].u.value.b i2c adapter - * [in] param[0].u.value.c i2c chip - * - * [in] param[1].u.value.a i2c control flags - * - * [in/out] memref[2] buffer to exchange the transfer data - * with the secure world - * - * [out] param[3].u.value.a bytes transferred by the driver - */ -#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 -/* I2C master transfer modes */ -#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 -#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 -/* I2C master control flags */ -#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0) - #endif /* _OPTEE_MSG_H */ |