diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/spi/Makefile | 4 | ||||
| -rw-r--r-- | drivers/spi/mxc_spi.c | 685 | ||||
| -rw-r--r-- | drivers/spi/omap2_mcspi.c | 210 | ||||
| -rw-r--r-- | drivers/spi/omap_uwire.c | 2 | ||||
| -rw-r--r-- | drivers/spi/pxa2xx_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 85 | ||||
| -rw-r--r-- | drivers/spi/spi_imx.c | 1770 | ||||
| -rw-r--r-- | drivers/spi/spi_ppc4xx.c | 612 | ||||
| -rw-r--r-- | drivers/spi/spi_s3c24xx.c | 159 | ||||
| -rw-r--r-- | drivers/spi/spi_stmp.c | 679 | ||||
| -rw-r--r-- | drivers/spi/spidev.c | 1 | ||||
| -rw-r--r-- | drivers/spi/tle62x0.c | 1 |
13 files changed, 2340 insertions, 1893 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 2c733c27db2f..4b6f7cba3b3d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -117,10 +117,11 @@ config SPI_GPIO speed with a custom version of this driver; see the source code. config SPI_IMX - tristate "Freescale iMX SPI controller" - depends on ARCH_MX1 && EXPERIMENTAL + tristate "Freescale i.MX SPI controllers" + depends on ARCH_MXC + select SPI_BITBANG help - This enables using the Freescale iMX SPI controller in master + This enables using the Freescale i.MX SPI controllers in master mode. config SPI_LM70_LLP @@ -173,11 +174,21 @@ config SPI_PL022 tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)" depends on ARM_AMBA && EXPERIMENTAL default y if MACH_U300 + default y if ARCH_REALVIEW + default y if INTEGRATOR_IMPD1 + default y if ARCH_VERSATILE help This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP controller. If you have an embedded system with an AMBA(R) bus and a PL022 controller, say Y or M here. +config SPI_PPC4xx + tristate "PPC4xx SPI Controller" + depends on PPC32 && 4xx && SPI_MASTER + select SPI_BITBANG + help + This selects a driver for the PPC4xx SPI Controller. + config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on ARCH_PXA && EXPERIMENTAL @@ -211,6 +222,12 @@ config SPI_SH_SCI help SPI driver for SuperH SCI blocks. +config SPI_STMP3XXX + tristate "Freescale STMP37xx/378x SPI/SSP controller" + depends on ARCH_STMP3XXX && SPI_MASTER + help + SPI driver for Freescale STMP37xx/378x SoC SSP interface + config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" depends on GENERIC_GPIO && CPU_TX49XX diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3de408d294ba..6d7a3f82c54b 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -17,7 +17,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o -obj-$(CONFIG_SPI_IMX) += spi_imx.o +obj-$(CONFIG_SPI_IMX) += mxc_spi.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o @@ -26,11 +26,13 @@ obj-$(CONFIG_SPI_ORION) += orion_spi.o obj-$(CONFIG_SPI_PL022) += amba-pl022.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o +obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o +obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o # ... add above this line ... # SPI protocol drivers (device/link on bus) diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c new file mode 100644 index 000000000000..b1447236ae81 --- /dev/null +++ b/drivers/spi/mxc_spi.c @@ -0,0 +1,685 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 Juergen Beisert + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation + * 51 Franklin Street, Fifth Floor + * Boston, MA 02110-1301, USA. + */ + +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> +#include <linux/types.h> + +#include <mach/spi.h> + +#define DRIVER_NAME "spi_imx" + +#define MXC_CSPIRXDATA 0x00 +#define MXC_CSPITXDATA 0x04 +#define MXC_CSPICTRL 0x08 +#define MXC_CSPIINT 0x0c +#define MXC_RESET 0x1c + +/* generic defines to abstract from the different register layouts */ +#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */ +#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */ + +struct mxc_spi_config { + unsigned int speed_hz; + unsigned int bpw; + unsigned int mode; + int cs; +}; + +struct mxc_spi_data { + struct spi_bitbang bitbang; + + struct completion xfer_done; + void *base; + int irq; + struct clk *clk; + unsigned long spi_clk; + int *chipselect; + + unsigned int count; + void (*tx)(struct mxc_spi_data *); + void (*rx)(struct mxc_spi_data *); + void *rx_buf; + const void *tx_buf; + unsigned int txfifo; /* number of words pushed in tx FIFO */ + + /* SoC specific functions */ + void (*intctrl)(struct mxc_spi_data *, int); + int (*config)(struct mxc_spi_data *, struct mxc_spi_config *); + void (*trigger)(struct mxc_spi_data *); + int (*rx_available)(struct mxc_spi_data *); +}; + +#define MXC_SPI_BUF_RX(type) \ +static void mxc_spi_buf_rx_##type(struct mxc_spi_data *mxc_spi) \ +{ \ + unsigned int val = readl(mxc_spi->base + MXC_CSPIRXDATA); \ + \ + if (mxc_spi->rx_buf) { \ + *(type *)mxc_spi->rx_buf = val; \ + mxc_spi->rx_buf += sizeof(type); \ + } \ +} + +#define MXC_SPI_BUF_TX(type) \ +static void mxc_spi_buf_tx_##type(struct mxc_spi_data *mxc_spi) \ +{ \ + type val = 0; \ + \ + if (mxc_spi->tx_buf) { \ + val = *(type *)mxc_spi->tx_buf; \ + mxc_spi->tx_buf += sizeof(type); \ + } \ + \ + mxc_spi->count -= sizeof(type); \ + \ + writel(val, mxc_spi->base + MXC_CSPITXDATA); \ +} + +MXC_SPI_BUF_RX(u8) +MXC_SPI_BUF_TX(u8) +MXC_SPI_BUF_RX(u16) +MXC_SPI_BUF_TX(u16) +MXC_SPI_BUF_RX(u32) +MXC_SPI_BUF_TX(u32) + +/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set + * (which is currently not the case in this driver) + */ +static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, + 256, 384, 512, 768, 1024}; + +/* MX21, MX27 */ +static unsigned int mxc_spi_clkdiv_1(unsigned int fin, + unsigned int fspi) +{ + int i, max; + + if (cpu_is_mx21()) + max = 18; + else + max = 16; + + for (i = 2; i < max; i++) + if (fspi * mxc_clkdivs[i] >= fin) + return i; + + return max; +} + +/* MX1, MX31, MX35 */ +static unsigned int mxc_spi_clkdiv_2(unsigned int fin, + unsigned int fspi) +{ + int i, div = 4; + + for (i = 0; i < 7; i++) { + if (fspi * div >= fin) + return i; + div <<= 1; + } + + return 7; +} + +#define MX31_INTREG_TEEN (1 << 0) +#define MX31_INTREG_RREN (1 << 3) + +#define MX31_CSPICTRL_ENABLE (1 << 0) +#define MX31_CSPICTRL_MASTER (1 << 1) +#define MX31_CSPICTRL_XCH (1 << 2) +#define MX31_CSPICTRL_POL (1 << 4) +#define MX31_CSPICTRL_PHA (1 << 5) +#define MX31_CSPICTRL_SSCTL (1 << 6) +#define MX31_CSPICTRL_SSPOL (1 << 7) +#define MX31_CSPICTRL_BC_SHIFT 8 +#define MX35_CSPICTRL_BL_SHIFT 20 +#define MX31_CSPICTRL_CS_SHIFT 24 +#define MX35_CSPICTRL_CS_SHIFT 12 +#define MX31_CSPICTRL_DR_SHIFT 16 + +#define MX31_CSPISTATUS 0x14 +#define MX31_STATUS_RR (1 << 3) + +/* These functions also work for the i.MX35, but be aware that + * the i.MX35 has a slightly different register layout for bits + * we do not use here. + */ +static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable) +{ + unsigned int val = 0; + + if (enable & MXC_INT_TE) + val |= MX31_INTREG_TEEN; + if (enable & MXC_INT_RR) + val |= MX31_INTREG_RREN; + + writel(val, mxc_spi->base + MXC_CSPIINT); +} + +static void mx31_trigger(struct mxc_spi_data *mxc_spi) +{ + unsigned int reg; + + reg = readl(mxc_spi->base + MXC_CSPICTRL); + reg |= MX31_CSPICTRL_XCH; + writel(reg, mxc_spi->base + MXC_CSPICTRL); +} + +static int mx31_config(struct mxc_spi_data *mxc_spi, + struct mxc_spi_config *config) +{ + unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + + reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) << + MX31_CSPICTRL_DR_SHIFT; + + if (cpu_is_mx31()) + reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; + else if (cpu_is_mx35()) { + reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; + reg |= MX31_CSPICTRL_SSCTL; + } + + if (config->mode & SPI_CPHA) + reg |= MX31_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX31_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX31_CSPICTRL_SSPOL; + if (config->cs < 0) { + if (cpu_is_mx31()) + reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT; + else if (cpu_is_mx35()) + reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT; + } + + writel(reg, mxc_spi->base + MXC_CSPICTRL); + + return 0; +} + +static int mx31_rx_available(struct mxc_spi_data *mxc_spi) +{ + return readl(mxc_spi->base + MX31_CSPISTATUS) & MX31_STATUS_RR; +} + +#define MX27_INTREG_RR (1 << 4) +#define MX27_INTREG_TEEN (1 << 9) +#define MX27_INTREG_RREN (1 << 13) + +#define MX27_CSPICTRL_POL (1 << 5) +#define MX27_CSPICTRL_PHA (1 << 6) +#define MX27_CSPICTRL_SSPOL (1 << 8) +#define MX27_CSPICTRL_XCH (1 << 9) +#define MX27_CSPICTRL_ENABLE (1 << 10) +#define MX27_CSPICTRL_MASTER (1 << 11) +#define MX27_CSPICTRL_DR_SHIFT 14 +#define MX27_CSPICTRL_CS_SHIFT 19 + +static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable) +{ + unsigned int val = 0; + + if (enable & MXC_INT_TE) + val |= MX27_INTREG_TEEN; + if (enable & MXC_INT_RR) + val |= MX27_INTREG_RREN; + + writel(val, mxc_spi->base + MXC_CSPIINT); +} + +static void mx27_trigger(struct mxc_spi_data *mxc_spi) +{ + unsigned int reg; + + reg = readl(mxc_spi->base + MXC_CSPICTRL); + reg |= MX27_CSPICTRL_XCH; + writel(reg, mxc_spi->base + MXC_CSPICTRL); +} + +static int mx27_config(struct mxc_spi_data *mxc_spi, + struct mxc_spi_config *config) +{ + unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; + + reg |= mxc_spi_clkdiv_1(mxc_spi->spi_clk, config->speed_hz) << + MX27_CSPICTRL_DR_SHIFT; + reg |= config->bpw - 1; + + if (config->mode & SPI_CPHA) + reg |= MX27_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX27_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX27_CSPICTRL_SSPOL; + if (config->cs < 0) + reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT; + + writel(reg, mxc_spi->base + MXC_CSPICTRL); + + return 0; +} + +static int mx27_rx_available(struct mxc_spi_data *mxc_spi) +{ + return readl(mxc_spi->base + MXC_CSPIINT) & MX27_INTREG_RR; +} + +#define MX1_INTREG_RR (1 << 3) +#define MX1_INTREG_TEEN (1 << 8) +#define MX1_INTREG_RREN (1 << 11) + +#define MX1_CSPICTRL_POL (1 << 4) +#define MX1_CSPICTRL_PHA (1 << 5) +#define MX1_CSPICTRL_XCH (1 << 8) +#define MX1_CSPICTRL_ENABLE (1 << 9) +#define MX1_CSPICTRL_MASTER (1 << 10) +#define MX1_CSPICTRL_DR_SHIFT 13 + +static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable) +{ + unsigned int val = 0; + + if (enable & MXC_INT_TE) + val |= MX1_INTREG_TEEN; + if (enable & MXC_INT_RR) + val |= MX1_INTREG_RREN; + + writel(val, mxc_spi->base + MXC_CSPIINT); +} + +static void mx1_trigger(struct mxc_spi_data *mxc_spi) +{ + unsigned int reg; + + reg = readl(mxc_spi->base + MXC_CSPICTRL); + reg |= MX1_CSPICTRL_XCH; + writel(reg, mxc_spi->base + MXC_CSPICTRL); +} + +static int mx1_config(struct mxc_spi_data *mxc_spi, + struct mxc_spi_config *config) +{ + unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; + + reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) << + MX1_CSPICTRL_DR_SHIFT; + reg |= config->bpw - 1; + + if (config->mode & SPI_CPHA) + reg |= MX1_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX1_CSPICTRL_POL; + + writel(reg, mxc_spi->base + MXC_CSPICTRL); + + return 0; +} + +static int mx1_rx_available(struct mxc_spi_data *mxc_spi) +{ + return readl(mxc_spi->base + MXC_CSPIINT) & MX1_INTREG_RR; +} + +static void mxc_spi_chipselect(struct spi_device *spi, int is_active) +{ + struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master); + unsigned int cs = 0; + int gpio = mxc_spi->chipselect[spi->chip_select]; + struct mxc_spi_config config; + + if (spi->mode & SPI_CS_HIGH) + cs = 1; + + if (is_active == BITBANG_CS_INACTIVE) { + if (gpio >= 0) + gpio_set_value(gpio, !cs); + return; + } + + config.bpw = spi->bits_per_word; + config.speed_hz = spi->max_speed_hz; + config.mode = spi->mode; + config.cs = mxc_spi->chipselect[spi->chip_select]; + + mxc_spi->config(mxc_spi, &config); + + /* Initialize the functions for transfer */ + if (config.bpw <= 8) { + mxc_spi->rx = mxc_spi_buf_rx_u8; + mxc_spi->tx = mxc_spi_buf_tx_u8; + } else if (config.bpw <= 16) { + mxc_spi->rx = mxc_spi_buf_rx_u16; + mxc_spi->tx = mxc_spi_buf_tx_u16; + } else if (config.bpw <= 32) { + mxc_spi->rx = mxc_spi_buf_rx_u32; + mxc_spi->tx = mxc_spi_buf_tx_u32; + } else + BUG(); + + if (gpio >= 0) + gpio_set_value(gpio, cs); + + return; +} + +static void mxc_spi_push(struct mxc_spi_data *mxc_spi) +{ + while (mxc_spi->txfifo < 8) { + if (!mxc_spi->count) + break; + mxc_spi->tx(mxc_spi); + mxc_spi->txfifo++; + } + + mxc_spi->trigger(mxc_spi); +} + +static irqreturn_t mxc_spi_isr(int irq, void *dev_id) +{ + struct mxc_spi_data *mxc_spi = dev_id; + + while (mxc_spi->rx_available(mxc_spi)) { + mxc_spi->rx(mxc_spi); + mxc_spi->txfifo--; + } + + if (mxc_spi->count) { + mxc_spi_push(mxc_spi); + return IRQ_HANDLED; + } + + if (mxc_spi->txfifo) { + /* No data left to push, but still waiting for rx data, + * enable receive data available interrupt. + */ + mxc_spi->intctrl(mxc_spi, MXC_INT_RR); + return IRQ_HANDLED; + } + + mxc_spi->intctrl(mxc_spi, 0); + complete(&mxc_spi->xfer_done); + + return IRQ_HANDLED; +} + +static int mxc_spi_setupxfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master); + struct mxc_spi_config config; + + config.bpw = t ? t->bits_per_word : spi->bits_per_word; + config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; + config.mode = spi->mode; + + mxc_spi->config(mxc_spi, &config); + + return 0; +} + +static int mxc_spi_transfer(struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master); + + mxc_spi->tx_buf = transfer->tx_buf; + mxc_spi->rx_buf = transfer->rx_buf; + mxc_spi->count = transfer->len; + mxc_spi->txfifo = 0; + + init_completion(&mxc_spi->xfer_done); + + mxc_spi_push(mxc_spi); + + mxc_spi->intctrl(mxc_spi, MXC_INT_TE); + + wait_for_completion(&mxc_spi->xfer_done); + + return transfer->len; +} + +static int mxc_spi_setup(struct spi_device *spi) +{ + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__, + spi->mode, spi->bits_per_word, spi->max_speed_hz); + + mxc_spi_chipselect(spi, BITBANG_CS_INACTIVE); + + return 0; +} + +static void mxc_spi_cleanup(struct spi_device *spi) +{ +} + +static int __init mxc_spi_probe(struct platform_device *pdev) +{ + struct spi_imx_master *mxc_platform_info; + struct spi_master *master; + struct mxc_spi_data *mxc_spi; + struct resource *res; + int i, ret; + + mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data; + if (!mxc_platform_info) { + dev_err(&pdev->dev, "can't get the platform data\n"); + return -EINVAL; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct mxc_spi_data)); + if (!master) + return -ENOMEM; + + platform_set_drvdata(pdev, master); + + master->bus_num = pdev->id; + master->num_chipselect = mxc_platform_info->num_chipselect; + + mxc_spi = spi_master_get_devdata(master); + mxc_spi->bitbang.master = spi_master_get(master); + mxc_spi->chipselect = mxc_platform_info->chipselect; + + for (i = 0; i < master->num_chipselect; i++) { + if (mxc_spi->chipselect[i] < 0) + continue; + ret = gpio_request(mxc_spi->chipselect[i], DRIVER_NAME); + if (ret) { + i--; + while (i > 0) + if (mxc_spi->chipselect[i] >= 0) + gpio_free(mxc_spi->chipselect[i--]); + dev_err(&pdev->dev, "can't get cs gpios"); + goto out_master_put; + } + gpio_direction_output(mxc_spi->chipselect[i], 1); + } + + mxc_spi->bitbang.chipselect = mxc_spi_chipselect; + mxc_spi->bitbang.setup_transfer = mxc_spi_setupxfer; + mxc_spi->bitbang.txrx_bufs = mxc_spi_transfer; + mxc_spi->bitbang.master->setup = mxc_spi_setup; + mxc_spi->bitbang.master->cleanup = mxc_spi_cleanup; + + init_completion(&mxc_spi->xfer_done); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "can't get platform resource\n"); + ret = -ENOMEM; + goto out_gpio_free; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "request_mem_region failed\n"); + ret = -EBUSY; + goto out_gpio_free; + } + + mxc_spi->base = ioremap(res->start, resource_size(res)); + if (!mxc_spi->base) { + ret = -EINVAL; + goto out_release_mem; + } + + mxc_spi->irq = platform_get_irq(pdev, 0); + if (!mxc_spi->irq) { + ret = -EINVAL; + goto out_iounmap; + } + + ret = request_irq(mxc_spi->irq, mxc_spi_isr, 0, DRIVER_NAME, mxc_spi); + if (ret) { + dev_err(&pdev->dev, "can't get irq%d: %d\n", mxc_spi->irq, ret); + goto out_iounmap; + } + + if (cpu_is_mx31() || cpu_is_mx35()) { + mxc_spi->intctrl = mx31_intctrl; + mxc_spi->config = mx31_config; + mxc_spi->trigger = mx31_trigger; + mxc_spi->rx_available = mx31_rx_available; + } else if (cpu_is_mx27() || cpu_is_mx21()) { + mxc_spi->intctrl = mx27_intctrl; + mxc_spi->config = mx27_config; + mxc_spi->trigger = mx27_trigger; + mxc_spi->rx_available = mx27_rx_available; + } else if (cpu_is_mx1()) { + mxc_spi->intctrl = mx1_intctrl; + mxc_spi->config = mx1_config; + mxc_spi->trigger = mx1_trigger; + mxc_spi->rx_available = mx1_rx_available; + } else + BUG(); + + mxc_spi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(mxc_spi->clk)) { + dev_err(&pdev->dev, "unable to get clock\n"); + ret = PTR_ERR(mxc_spi->clk); + goto out_free_irq; + } + + clk_enable(mxc_spi->clk); + mxc_spi->spi_clk = clk_get_rate(mxc_spi->clk); + + if (!cpu_is_mx31() || !cpu_is_mx35()) + writel(1, mxc_spi->base + MXC_RESET); + + mxc_spi->intctrl(mxc_spi, 0); + + ret = spi_bitbang_start(&mxc_spi->bitbang); + if (ret) { + dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); + goto out_clk_put; + } + + dev_info(&pdev->dev, "probed\n"); + + return ret; + +out_clk_put: + clk_disable(mxc_spi->clk); + clk_put(mxc_spi->clk); +out_free_irq: + free_irq(mxc_spi->irq, mxc_spi); +out_iounmap: + iounmap(mxc_spi->base); +out_release_mem: + release_mem_region(res->start, resource_size(res)); +out_gpio_free: + for (i = 0; i < master->num_chipselect; i++) + if (mxc_spi->chipselect[i] >= 0) + gpio_free(mxc_spi->chipselect[i]); +out_master_put: + spi_master_put(master); + kfree(master); + platform_set_drvdata(pdev, NULL); + return ret; +} + +static int __exit mxc_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct mxc_spi_data *mxc_spi = spi_master_get_devdata(master); + int i; + + spi_bitbang_stop(&mxc_spi->bitbang); + + writel(0, mxc_spi->base + MXC_CSPICTRL); + clk_disable(mxc_spi->clk); + clk_put(mxc_spi->clk); + free_irq(mxc_spi->irq, mxc_spi); + iounmap(mxc_spi->base); + + for (i = 0; i < master->num_chipselect; i++) + if (mxc_spi->chipselect[i] >= 0) + gpio_free(mxc_spi->chipselect[i]); + + spi_master_put(master); + + release_mem_region(res->start, resource_size(res)); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver mxc_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = mxc_spi_probe, + .remove = __exit_p(mxc_spi_remove), +}; + +static int __init mxc_spi_init(void) +{ + return platform_driver_register(&mxc_spi_driver); +} + +static void __exit mxc_spi_exit(void) +{ + platform_driver_unregister(&mxc_spi_driver); +} + +module_init(mxc_spi_init); +module_exit(mxc_spi_exit); + +MODULE_DESCRIPTION("SPI Master Controller driver"); +MODULE_AUTHOR("Sascha Hauer, Pengutronix"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 9b80ad36dbba..ba1a872b221e 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -41,6 +41,9 @@ #define OMAP2_MCSPI_MAX_FREQ 48000000 +/* OMAP2 has 3 SPI controllers, while OMAP3 has 4 */ +#define OMAP2_MCSPI_MAX_CTRL 4 + #define OMAP2_MCSPI_REVISION 0x00 #define OMAP2_MCSPI_SYSCONFIG 0x10 #define OMAP2_MCSPI_SYSSTATUS 0x14 @@ -59,40 +62,40 @@ /* per-register bitmasks: */ -#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3) -#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0) -#define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE BIT(4) +#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2) +#define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE BIT(0) +#define OMAP2_MCSPI_SYSCONFIG_SOFTRESET BIT(1) -#define OMAP2_MCSPI_SYSSTATUS_RESETDONE (1 << 0) +#define OMAP2_MCSPI_SYSSTATUS_RESETDONE BIT(0) -#define OMAP2_MCSPI_MODULCTRL_SINGLE (1 << 0) -#define OMAP2_MCSPI_MODULCTRL_MS (1 << 2) -#define OMAP2_MCSPI_MODULCTRL_STEST (1 << 3) +#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0) +#define OMAP2_MCSPI_MODULCTRL_MS BIT(2) +#define OMAP2_MCSPI_MODULCTRL_STEST BIT(3) -#define OMAP2_MCSPI_CHCONF_PHA (1 << 0) -#define OMAP2_MCSPI_CHCONF_POL (1 << 1) +#define OMAP2_MCSPI_CHCONF_PHA BIT(0) +#define OMAP2_MCSPI_CHCONF_POL BIT(1) #define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2) -#define OMAP2_MCSPI_CHCONF_EPOL (1 << 6) +#define OMAP2_MCSPI_CHCONF_EPOL BIT(6) #define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7) -#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY (0x01 << 12) -#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY (0x02 << 12) +#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY BIT(12) +#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY BIT(13) #define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12) -#define OMAP2_MCSPI_CHCONF_DMAW (1 << 14) -#define OMAP2_MCSPI_CHCONF_DMAR (1 << 15) -#define OMAP2_MCSPI_CHCONF_DPE0 (1 << 16) -#define OMAP2_MCSPI_CHCONF_DPE1 (1 << 17) -#define OMAP2_MCSPI_CHCONF_IS (1 << 18) -#define OMAP2_MCSPI_CHCONF_TURBO (1 << 19) -#define OMAP2_MCSPI_CHCONF_FORCE (1 << 20) +#define OMAP2_MCSPI_CHCONF_DMAW BIT(14) +#define OMAP2_MCSPI_CHCONF_DMAR BIT(15) +#define OMAP2_MCSPI_CHCONF_DPE0 BIT(16) +#define OMAP2_MCSPI_CHCONF_DPE1 BIT(17) +#define OMAP2_MCSPI_CHCONF_IS BIT(18) +#define OMAP2_MCSPI_CHCONF_TURBO BIT(19) +#define OMAP2_MCSPI_CHCONF_FORCE BIT(20) -#define OMAP2_MCSPI_CHSTAT_RXS (1 << 0) -#define OMAP2_MCSPI_CHSTAT_TXS (1 << 1) -#define OMAP2_MCSPI_CHSTAT_EOT (1 << 2) +#define OMAP2_MCSPI_CHSTAT_RXS BIT(0) +#define OMAP2_MCSPI_CHSTAT_TXS BIT(1) +#define OMAP2_MCSPI_CHSTAT_EOT BIT(2) -#define OMAP2_MCSPI_CHCTRL_EN (1 << 0) +#define OMAP2_MCSPI_CHCTRL_EN BIT(0) -#define OMAP2_MCSPI_WAKEUPENABLE_WKEN (1 << 0) +#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0) /* We have 2 DMA channels per CS, one for RX and one for TX */ struct omap2_mcspi_dma { @@ -131,8 +134,23 @@ struct omap2_mcspi_cs { void __iomem *base; unsigned long phys; int word_len; + struct list_head node; + /* Context save and restore shadow register */ + u32 chconf0; +}; + +/* used for context save and restore, structure members to be updated whenever + * corresponding registers are modified. + */ +struct omap2_mcspi_regs { + u32 sysconfig; + u32 modulctrl; + u32 wakeupenable; + struct list_head cs; }; +static struct omap2_mcspi_regs omap2_mcspi_ctx[OMAP2_MCSPI_MAX_CTRL]; + static struct workqueue_struct *omap2_mcspi_wq; #define MOD_REG_BIT(val, mask, set) do { \ @@ -172,12 +190,27 @@ static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx) return __raw_readl(cs->base + idx); } +static inline u32 mcspi_cached_chconf0(const struct spi_device *spi) +{ + struct omap2_mcspi_cs *cs = spi->controller_state; + + return cs->chconf0; +} + +static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val) +{ + struct omap2_mcspi_cs *cs = spi->controller_state; + + cs->chconf0 = val; + mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val); +} + static void omap2_mcspi_set_dma_req(const struct spi_device *spi, int is_read, int enable) { u32 l, rw; - l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); + l = mcspi_cached_chconf0(spi); if (is_read) /* 1 is read, 0 write */ rw = OMAP2_MCSPI_CHCONF_DMAR; @@ -185,7 +218,7 @@ static void omap2_mcspi_set_dma_req(const struct spi_device *spi, rw = OMAP2_MCSPI_CHCONF_DMAW; MOD_REG_BIT(l, rw, enable); - mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); + mcspi_write_chconf0(spi, l); } static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable) @@ -200,9 +233,9 @@ static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active) { u32 l; - l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); + l = mcspi_cached_chconf0(spi); MOD_REG_BIT(l, OMAP2_MCSPI_CHCONF_FORCE, cs_active); - mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); + mcspi_write_chconf0(spi, l); } static void omap2_mcspi_set_master_mode(struct spi_master *master) @@ -217,6 +250,46 @@ static void omap2_mcspi_set_master_mode(struct spi_master *master) MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_MS, 0); MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_SINGLE, 1); mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l); + + omap2_mcspi_ctx[master->bus_num - 1].modulctrl = l; +} + +static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi) +{ + struct spi_master *spi_cntrl; + struct omap2_mcspi_cs *cs; + spi_cntrl = mcspi->master; + + /* McSPI: context restore */ + mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_MODULCTRL, + omap2_mcspi_ctx[spi_cntrl->bus_num - 1].modulctrl); + + mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_SYSCONFIG, + omap2_mcspi_ctx[spi_cntrl->bus_num - 1].sysconfig); + + mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE, + omap2_mcspi_ctx[spi_cntrl->bus_num - 1].wakeupenable); + + list_for_each_entry(cs, &omap2_mcspi_ctx[spi_cntrl->bus_num - 1].cs, + node) + __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); +} +static void omap2_mcspi_disable_clocks(struct omap2_mcspi *mcspi) +{ + clk_disable(mcspi->ick); + clk_disable(mcspi->fck); +} + +static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) +{ + if (clk_enable(mcspi->ick)) + return -ENODEV; + if (clk_enable(mcspi->fck)) + return -ENODEV; + + omap2_mcspi_restore_ctx(mcspi); + + return 0; } static unsigned @@ -357,7 +430,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) c = count; word_len = cs->word_len; - l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); + l = mcspi_cached_chconf0(spi); l &= ~OMAP2_MCSPI_CHCONF_TRM_MASK; /* We store the pre-calculated register addresses on stack to speed @@ -397,8 +470,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) * more word i/o: switch to rx+tx */ if (c == 0 && tx == NULL) - mcspi_write_cs_reg(spi, - OMAP2_MCSPI_CHCONF0, l); + mcspi_write_chconf0(spi, l); *rx++ = __raw_readl(rx_reg); #ifdef VERBOSE dev_dbg(&spi->dev, "read-%d %02x\n", @@ -436,8 +508,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) * more word i/o: switch to rx+tx */ if (c == 0 && tx == NULL) - mcspi_write_cs_reg(spi, - OMAP2_MCSPI_CHCONF0, l); + mcspi_write_chconf0(spi, l); *rx++ = __raw_readl(rx_reg); #ifdef VERBOSE dev_dbg(&spi->dev, "read-%d %04x\n", @@ -475,8 +546,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) * more word i/o: switch to rx+tx */ if (c == 0 && tx == NULL) - mcspi_write_cs_reg(spi, - OMAP2_MCSPI_CHCONF0, l); + mcspi_write_chconf0(spi, l); *rx++ = __raw_readl(rx_reg); #ifdef VERBOSE dev_dbg(&spi->dev, "read-%d %04x\n", @@ -505,10 +575,12 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, { struct omap2_mcspi_cs *cs = spi->controller_state; struct omap2_mcspi *mcspi; + struct spi_master *spi_cntrl; u32 l = 0, div = 0; u8 word_len = spi->bits_per_word; mcspi = spi_master_get_devdata(spi->master); + spi_cntrl = mcspi->master; if (t != NULL && t->bits_per_word) word_len = t->bits_per_word; @@ -522,7 +594,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, } else div = 15; - l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); + l = mcspi_cached_chconf0(spi); /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS * REVISIT: this controller could support SPI_3WIRE mode. @@ -554,7 +626,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, else l &= ~OMAP2_MCSPI_CHCONF_PHA; - mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); + mcspi_write_chconf0(spi, l); dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n", OMAP2_MCSPI_MAX_FREQ / (1 << div), @@ -647,7 +719,11 @@ static int omap2_mcspi_setup(struct spi_device *spi) return -ENOMEM; cs->base = mcspi->base + spi->chip_select * 0x14; cs->phys = mcspi->phys + spi->chip_select * 0x14; + cs->chconf0 = 0; spi->controller_state = cs; + /* Link this to context save list */ + list_add_tail(&cs->node, + &omap2_mcspi_ctx[mcspi->master->bus_num - 1].cs); } if (mcspi_dma->dma_rx_channel == -1 @@ -657,11 +733,11 @@ static int omap2_mcspi_setup(struct spi_device *spi) return ret; } - clk_enable(mcspi->ick); - clk_enable(mcspi->fck); + if (omap2_mcspi_enable_clocks(mcspi)) + return -ENODEV; + ret = omap2_mcspi_setup_transfer(spi, NULL); - clk_disable(mcspi->fck); - clk_disable(mcspi->ick); + omap2_mcspi_disable_clocks(mcspi); return ret; } @@ -670,10 +746,15 @@ static void omap2_mcspi_cleanup(struct spi_device *spi) { struct omap2_mcspi *mcspi; struct omap2_mcspi_dma *mcspi_dma; + struct omap2_mcspi_cs *cs; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; + /* Unlink controller state from context save list */ + cs = spi->controller_state; + list_del(&cs->node); + kfree(spi->controller_state); if (mcspi_dma->dma_rx_channel != -1) { @@ -693,8 +774,8 @@ static void omap2_mcspi_work(struct work_struct *work) mcspi = container_of(work, struct omap2_mcspi, work); spin_lock_irq(&mcspi->lock); - clk_enable(mcspi->ick); - clk_enable(mcspi->fck); + if (omap2_mcspi_enable_clocks(mcspi)) + goto out; /* We only enable one channel at a time -- the one whose message is * at the head of the queue -- although this controller would gladly @@ -741,13 +822,13 @@ static void omap2_mcspi_work(struct work_struct *work) cs_active = 1; } - chconf = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); + chconf = mcspi_cached_chconf0(spi); chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK; if (t->tx_buf == NULL) chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY; else if (t->rx_buf == NULL) chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY; - mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, chconf); + mcspi_write_chconf0(spi, chconf); if (t->len) { unsigned count; @@ -796,9 +877,9 @@ static void omap2_mcspi_work(struct work_struct *work) spin_lock_irq(&mcspi->lock); } - clk_disable(mcspi->fck); - clk_disable(mcspi->ick); + omap2_mcspi_disable_clocks(mcspi); +out: spin_unlock_irq(&mcspi->lock); } @@ -885,8 +966,8 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi) struct spi_master *master = mcspi->master; u32 tmp; - clk_enable(mcspi->ick); - clk_enable(mcspi->fck); + if (omap2_mcspi_enable_clocks(mcspi)) + return -1; mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, OMAP2_MCSPI_SYSCONFIG_SOFTRESET); @@ -894,18 +975,18 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi) tmp = mcspi_read_reg(master, OMAP2_MCSPI_SYSSTATUS); } while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE)); - mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, - OMAP2_MCSPI_SYSCONFIG_AUTOIDLE | - OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP | - OMAP2_MCSPI_SYSCONFIG_SMARTIDLE); + tmp = OMAP2_MCSPI_SYSCONFIG_AUTOIDLE | + OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP | + OMAP2_MCSPI_SYSCONFIG_SMARTIDLE; + mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, tmp); + omap2_mcspi_ctx[master->bus_num - 1].sysconfig = tmp; - mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, - OMAP2_MCSPI_WAKEUPENABLE_WKEN); + tmp = OMAP2_MCSPI_WAKEUPENABLE_WKEN; + mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, tmp); + omap2_mcspi_ctx[master->bus_num - 1].wakeupenable = tmp; omap2_mcspi_set_master_mode(master); - - clk_disable(mcspi->fck); - clk_disable(mcspi->ick); + omap2_mcspi_disable_clocks(mcspi); return 0; } @@ -933,7 +1014,8 @@ static u8 __initdata spi2_txdma_id[] = { OMAP24XX_DMA_SPI2_TX1, }; -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) \ + || defined(CONFIG_ARCH_OMAP4) static u8 __initdata spi3_rxdma_id[] = { OMAP24XX_DMA_SPI3_RX0, OMAP24XX_DMA_SPI3_RX1, @@ -945,7 +1027,7 @@ static u8 __initdata spi3_txdma_id[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static u8 __initdata spi4_rxdma_id[] = { OMAP34XX_DMA_SPI4_RX0, }; @@ -975,14 +1057,15 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) txdma_id = spi2_txdma_id; num_chipselect = 2; break; -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \ + || defined(CONFIG_ARCH_OMAP4) case 3: rxdma_id = spi3_rxdma_id; txdma_id = spi3_txdma_id; num_chipselect = 2; break; #endif -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) case 4: rxdma_id = spi4_rxdma_id; txdma_id = spi4_txdma_id; @@ -1038,6 +1121,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) spin_lock_init(&mcspi->lock); INIT_LIST_HEAD(&mcspi->msg_queue); + INIT_LIST_HEAD(&omap2_mcspi_ctx[master->bus_num - 1].cs); mcspi->ick = clk_get(&pdev->dev, "ick"); if (IS_ERR(mcspi->ick)) { diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index 8980a5640bd9..e75ba9b28898 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -213,7 +213,7 @@ static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) unsigned bits = ust->bits_per_word; unsigned bytes; u16 val, w; - int status = 0;; + int status = 0; if (!t->tx_buf && !t->rx_buf) return 0; diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 8a1fb608e8f1..c8c2b693ffac 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1731,7 +1731,7 @@ static int __init pxa2xx_spi_init(void) { return platform_driver_probe(&driver, pxa2xx_spi_probe); } -module_init(pxa2xx_spi_init); +subsys_initcall(pxa2xx_spi_init); static void __exit pxa2xx_spi_exit(void) { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 70845ccd85c3..b76f2468a84a 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/cache.h> #include <linux/mutex.h> +#include <linux/mod_devicetable.h> #include <linux/spi/spi.h> @@ -59,9 +60,32 @@ static struct device_attribute spi_dev_attrs[] = { * and the sysfs version makes coldplug work too. */ +static const struct spi_device_id *spi_match_id(const struct spi_device_id *id, + const struct spi_device *sdev) +{ + while (id->name[0]) { + if (!strcmp(sdev->modalias, id->name)) + return id; + id++; + } + return NULL; +} + +const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev) +{ + const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver); + + return spi_match_id(sdrv->id_table, sdev); +} +EXPORT_SYMBOL_GPL(spi_get_device_id); + static int spi_match_device(struct device *dev, struct device_driver *drv) { const struct spi_device *spi = to_spi_device(dev); + const struct spi_driver *sdrv = to_spi_driver(drv); + + if (sdrv->id_table) + return !!spi_match_id(sdrv->id_table, spi); return strcmp(spi->modalias, drv->name) == 0; } @@ -70,7 +94,7 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) { const struct spi_device *spi = to_spi_device(dev); - add_uevent_var(env, "MODALIAS=%s", spi->modalias); + add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias); return 0; } @@ -639,6 +663,65 @@ int spi_setup(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_setup); +/** + * spi_async - asynchronous SPI transfer + * @spi: device with which data will be exchanged + * @message: describes the data transfers, including completion callback + * Context: any (irqs may be blocked, etc) + * + * This call may be used in_irq and other contexts which can't sleep, + * as well as from task contexts which can sleep. + * + * The completion callback is invoked in a context which can't sleep. + * Before that invocation, the value of message->status is undefined. + * When the callback is issued, message->status holds either zero (to + * indicate complete success) or a negative error code. After that + * callback returns, the driver which issued the transfer request may + * deallocate the associated memory; it's no longer in use by any SPI + * core or controller driver code. + * + * Note that although all messages to a spi_device are handled in + * FIFO order, messages may go to different devices in other orders. + * Some device might be higher priority, or have various "hard" access + * time requirements, for example. + * + * On detection of any fault during the transfer, processing of + * the entire message is aborted, and the device is deselected. + * Until returning from the associated message completion callback, + * no other spi_message queued to that device will be processed. + * (This rule applies equally to all the synchronous transfer calls, + * which are wrappers around this core asynchronous primitive.) + */ +int spi_async(struct spi_device *spi, struct spi_message *message) +{ + struct spi_master *master = spi->master; + + /* Half-duplex links include original MicroWire, and ones with + * only one data pin like SPI_3WIRE (switches direction) or where + * either MOSI or MISO is missing. They can also be caused by + * software limitations. + */ + if ((master->flags & SPI_MASTER_HALF_DUPLEX) + || (spi->mode & SPI_3WIRE)) { + struct spi_transfer *xfer; + unsigned flags = master->flags; + + list_for_each_entry(xfer, &message->transfers, transfer_list) { + if (xfer->rx_buf && xfer->tx_buf) + return -EINVAL; + if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf) + return -EINVAL; + if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf) + return -EINVAL; + } + } + + message->spi = spi; + message->status = -EINPROGRESS; + return master->transfer(spi, message); +} +EXPORT_SYMBOL_GPL(spi_async); + /*-------------------------------------------------------------------------*/ diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c deleted file mode 100644 index c195e45f7f35..000000000000 --- a/drivers/spi/spi_imx.c +++ /dev/null @@ -1,1770 +0,0 @@ -/* - * drivers/spi/spi_imx.c - * - * Copyright (C) 2006 SWAPP - * Andrea Paterniani <a.paterniani@swapp-eng.it> - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/spi/spi.h> -#include <linux/workqueue.h> -#include <linux/delay.h> -#include <linux/clk.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/delay.h> - -#include <mach/hardware.h> -#include <mach/imx-dma.h> -#include <mach/spi_imx.h> - -/*-------------------------------------------------------------------------*/ -/* SPI Registers offsets from peripheral base address */ -#define SPI_RXDATA (0x00) -#define SPI_TXDATA (0x04) -#define SPI_CONTROL (0x08) -#define SPI_INT_STATUS (0x0C) -#define SPI_TEST (0x10) -#define SPI_PERIOD (0x14) -#define SPI_DMA (0x18) -#define SPI_RESET (0x1C) - -/* SPI Control Register Bit Fields & Masks */ -#define SPI_CONTROL_BITCOUNT_MASK (0xF) /* Bit Count Mask */ -#define SPI_CONTROL_BITCOUNT(n) (((n) - 1) & SPI_CONTROL_BITCOUNT_MASK) -#define SPI_CONTROL_POL (0x1 << 4) /* Clock Polarity Mask */ -#define SPI_CONTROL_POL_ACT_HIGH (0x0 << 4) /* Active high pol. (0=idle) */ -#define SPI_CONTROL_POL_ACT_LOW (0x1 << 4) /* Active low pol. (1=idle) */ -#define SPI_CONTROL_PHA (0x1 << 5) /* Clock Phase Mask */ -#define SPI_CONTROL_PHA_0 (0x0 << 5) /* Clock Phase 0 */ -#define SPI_CONTROL_PHA_1 (0x1 << 5) /* Clock Phase 1 */ -#define SPI_CONTROL_SSCTL (0x1 << 6) /* /SS Waveform Select Mask */ -#define SPI_CONTROL_SSCTL_0 (0x0 << 6) /* Master: /SS stays low between SPI burst - Slave: RXFIFO advanced by BIT_COUNT */ -#define SPI_CONTROL_SSCTL_1 (0x1 << 6) /* Master: /SS insert pulse between SPI burst - Slave: RXFIFO advanced by /SS rising edge */ -#define SPI_CONTROL_SSPOL (0x1 << 7) /* /SS Polarity Select Mask */ -#define SPI_CONTROL_SSPOL_ACT_LOW (0x0 << 7) /* /SS Active low */ -#define SPI_CONTROL_SSPOL_ACT_HIGH (0x1 << 7) /* /SS Active high */ -#define SPI_CONTROL_XCH (0x1 << 8) /* Exchange */ -#define SPI_CONTROL_SPIEN (0x1 << 9) /* SPI Module Enable */ -#define SPI_CONTROL_MODE (0x1 << 10) /* SPI Mode Select Mask */ -#define SPI_CONTROL_MODE_SLAVE (0x0 << 10) /* SPI Mode Slave */ -#define SPI_CONTROL_MODE_MASTER (0x1 << 10) /* SPI Mode Master */ -#define SPI_CONTROL_DRCTL (0x3 << 11) /* /SPI_RDY Control Mask */ -#define SPI_CONTROL_DRCTL_0 (0x0 << 11) /* Ignore /SPI_RDY */ -#define SPI_CONTROL_DRCTL_1 (0x1 << 11) /* /SPI_RDY falling edge triggers input */ -#define SPI_CONTROL_DRCTL_2 (0x2 << 11) /* /SPI_RDY active low level triggers input */ -#define SPI_CONTROL_DATARATE (0x7 << 13) /* Data Rate Mask */ -#define SPI_PERCLK2_DIV_MIN (0) /* PERCLK2:4 */ -#define SPI_PERCLK2_DIV_MAX (7) /* PERCLK2:512 */ -#define SPI_CONTROL_DATARATE_MIN (SPI_PERCLK2_DIV_MAX << 13) -#define SPI_CONTROL_DATARATE_MAX (SPI_PERCLK2_DIV_MIN << 13) -#define SPI_CONTROL_DATARATE_BAD (SPI_CONTROL_DATARATE_MIN + 1) - -/* SPI Interrupt/Status Register Bit Fields & Masks */ -#define SPI_STATUS_TE (0x1 << 0) /* TXFIFO Empty Status */ -#define SPI_STATUS_TH (0x1 << 1) /* TXFIFO Half Status */ -#define SPI_STATUS_TF (0x1 << 2) /* TXFIFO Full Status */ -#define SPI_STATUS_RR (0x1 << 3) /* RXFIFO Data Ready Status */ -#define SPI_STATUS_RH (0x1 << 4) /* RXFIFO Half Status */ -#define SPI_STATUS_RF (0x1 << 5) /* RXFIFO Full Status */ -#define SPI_STATUS_RO (0x1 << 6) /* RXFIFO Overflow */ -#define SPI_STATUS_BO (0x1 << 7) /* Bit Count Overflow */ -#define SPI_STATUS (0xFF) /* SPI Status Mask */ -#define SPI_INTEN_TE (0x1 << 8) /* TXFIFO Empty Interrupt Enable */ -#define SPI_INTEN_TH (0x1 << 9) /* TXFIFO Half Interrupt Enable */ -#define SPI_INTEN_TF (0x1 << 10) /* TXFIFO Full Interrupt Enable */ -#define SPI_INTEN_RE (0x1 << 11) /* RXFIFO Data Ready Interrupt Enable */ -#define SPI_INTEN_RH (0x1 << 12) /* RXFIFO Half Interrupt Enable */ -#define SPI_INTEN_RF (0x1 << 13) /* RXFIFO Full Interrupt Enable */ -#define SPI_INTEN_RO (0x1 << 14) /* RXFIFO Overflow Interrupt Enable */ -#define SPI_INTEN_BO (0x1 << 15) /* Bit Count Overflow Interrupt Enable */ -#define SPI_INTEN (0xFF << 8) /* SPI Interrupt Enable Mask */ - -/* SPI Test Register Bit Fields & Masks */ -#define SPI_TEST_TXCNT (0xF << 0) /* TXFIFO Counter */ -#define SPI_TEST_RXCNT_LSB (4) /* RXFIFO Counter LSB */ -#define SPI_TEST_RXCNT (0xF << 4) /* RXFIFO Counter */ -#define SPI_TEST_SSTATUS (0xF << 8) /* State Machine Status */ -#define SPI_TEST_LBC (0x1 << 14) /* Loop Back Control */ - -/* SPI Period Register Bit Fields & Masks */ -#define SPI_PERIOD_WAIT (0x7FFF << 0) /* Wait Between Transactions */ -#define SPI_PERIOD_MAX_WAIT (0x7FFF) /* Max Wait Between - Transactions */ -#define SPI_PERIOD_CSRC (0x1 << 15) /* Period Clock Source Mask */ -#define SPI_PERIOD_CSRC_BCLK (0x0 << 15) /* Period Clock Source is - Bit Clock */ -#define SPI_PERIOD_CSRC_32768 (0x1 << 15) /* Period Clock Source is - 32.768 KHz Clock */ - -/* SPI DMA Register Bit Fields & Masks */ -#define SPI_DMA_RHDMA (0x1 << 4) /* RXFIFO Half Status */ -#define SPI_DMA_RFDMA (0x1 << 5) /* RXFIFO Full Status */ -#define SPI_DMA_TEDMA (0x1 << 6) /* TXFIFO Empty Status */ -#define SPI_DMA_THDMA (0x1 << 7) /* TXFIFO Half Status */ -#define SPI_DMA_RHDEN (0x1 << 12) /* RXFIFO Half DMA Request Enable */ -#define SPI_DMA_RFDEN (0x1 << 13) /* RXFIFO Full DMA Request Enable */ -#define SPI_DMA_TEDEN (0x1 << 14) /* TXFIFO Empty DMA Request Enable */ -#define SPI_DMA_THDEN (0x1 << 15) /* TXFIFO Half DMA Request Enable */ - -/* SPI Soft Reset Register Bit Fields & Masks */ -#define SPI_RESET_START (0x1) /* Start */ - -/* Default SPI configuration values */ -#define SPI_DEFAULT_CONTROL \ -( \ - SPI_CONTROL_BITCOUNT(16) | \ - SPI_CONTROL_POL_ACT_HIGH | \ - SPI_CONTROL_PHA_0 | \ - SPI_CONTROL_SPIEN | \ - SPI_CONTROL_SSCTL_1 | \ - SPI_CONTROL_MODE_MASTER | \ - SPI_CONTROL_DRCTL_0 | \ - SPI_CONTROL_DATARATE_MIN \ -) -#define SPI_DEFAULT_ENABLE_LOOPBACK (0) -#define SPI_DEFAULT_ENABLE_DMA (0) -#define SPI_DEFAULT_PERIOD_WAIT (8) -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/* TX/RX SPI FIFO size */ -#define SPI_FIFO_DEPTH (8) -#define SPI_FIFO_BYTE_WIDTH (2) -#define SPI_FIFO_OVERFLOW_MARGIN (2) - -/* DMA burst length for half full/empty request trigger */ -#define SPI_DMA_BLR (SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2) - -/* Dummy char output to achieve reads. - Choosing something different from all zeroes may help pattern recogition - for oscilloscope analysis, but may break some drivers. */ -#define SPI_DUMMY_u8 0 -#define SPI_DUMMY_u16 ((SPI_DUMMY_u8 << 8) | SPI_DUMMY_u8) -#define SPI_DUMMY_u32 ((SPI_DUMMY_u16 << 16) | SPI_DUMMY_u16) - -/** - * Macro to change a u32 field: - * @r : register to edit - * @m : bit mask - * @v : new value for the field correctly bit-alligned -*/ -#define u32_EDIT(r, m, v) r = (r & ~(m)) | (v) - -/* Message state */ -#define START_STATE ((void*)0) -#define RUNNING_STATE ((void*)1) -#define DONE_STATE ((void*)2) -#define ERROR_STATE ((void*)-1) - -/* Queue state */ -#define QUEUE_RUNNING (0) -#define QUEUE_STOPPED (1) - -#define IS_DMA_ALIGNED(x) (((u32)(x) & 0x03) == 0) -#define DMA_ALIGNMENT 4 -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/* Driver data structs */ - -/* Context */ -struct driver_data { - /* Driver model hookup */ - struct platform_device *pdev; - - /* SPI framework hookup */ - struct spi_master *master; - - /* IMX hookup */ - struct spi_imx_master *master_info; - - /* Memory resources and SPI regs virtual address */ - struct resource *ioarea; - void __iomem *regs; - - /* SPI RX_DATA physical address */ - dma_addr_t rd_data_phys; - - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct work; - spinlock_t lock; - struct list_head queue; - int busy; - int run; - - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - - /* Current message, transfer and state */ - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; - - /* Rd / Wr buffers pointers */ - size_t len; - void *tx; - void *tx_end; - void *rx; - void *rx_end; - - u8 rd_only; - u8 n_bytes; - int cs_change; - - /* Function pointers */ - irqreturn_t (*transfer_handler)(struct driver_data *drv_data); - void (*cs_control)(u32 command); - - /* DMA setup */ - int rx_channel; - int tx_channel; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - int rx_dma_needs_unmap; - int tx_dma_needs_unmap; - size_t tx_map_len; - u32 dummy_dma_buf ____cacheline_aligned; - - struct clk *clk; -}; - -/* Runtime state */ -struct chip_data { - u32 control; - u32 period; - u32 test; - - u8 enable_dma:1; - u8 bits_per_word; - u8 n_bytes; - u32 max_speed_hz; - - void (*cs_control)(u32 command); -}; -/*-------------------------------------------------------------------------*/ - - -static void pump_messages(struct work_struct *work); - -static void flush(struct driver_data *drv_data) -{ - void __iomem *regs = drv_data->regs; - u32 control; - - dev_dbg(&drv_data->pdev->dev, "flush\n"); - - /* Wait for end of transaction */ - do { - control = readl(regs + SPI_CONTROL); - } while (control & SPI_CONTROL_XCH); - - /* Release chip select if requested, transfer delays are - handled in pump_transfers */ - if (drv_data->cs_change) - drv_data->cs_control(SPI_CS_DEASSERT); - - /* Disable SPI to flush FIFOs */ - writel(control & ~SPI_CONTROL_SPIEN, regs + SPI_CONTROL); - writel(control, regs + SPI_CONTROL); -} - -static void restore_state(struct driver_data *drv_data) -{ - void __iomem *regs = drv_data->regs; - struct chip_data *chip = drv_data->cur_chip; - - /* Load chip registers */ - dev_dbg(&drv_data->pdev->dev, - "restore_state\n" - " test = 0x%08X\n" - " control = 0x%08X\n", - chip->test, - chip->control); - writel(chip->test, regs + SPI_TEST); - writel(chip->period, regs + SPI_PERIOD); - writel(0, regs + SPI_INT_STATUS); - writel(chip->control, regs + SPI_CONTROL); -} - -static void null_cs_control(u32 command) -{ -} - -static inline u32 data_to_write(struct driver_data *drv_data) -{ - return ((u32)(drv_data->tx_end - drv_data->tx)) / drv_data->n_bytes; -} - -static inline u32 data_to_read(struct driver_data *drv_data) -{ - return ((u32)(drv_data->rx_end - drv_data->rx)) / drv_data->n_bytes; -} - -static int write(struct driver_data *drv_data) -{ - void __iomem *regs = drv_data->regs; - void *tx = drv_data->tx; - void *tx_end = drv_data->tx_end; - u8 n_bytes = drv_data->n_bytes; - u32 remaining_writes; - u32 fifo_avail_space; - u32 n; - u16 d; - - /* Compute how many fifo writes to do */ - remaining_writes = (u32)(tx_end - tx) / n_bytes; - fifo_avail_space = SPI_FIFO_DEPTH - - (readl(regs + SPI_TEST) & SPI_TEST_TXCNT); - if (drv_data->rx && (fifo_avail_space > SPI_FIFO_OVERFLOW_MARGIN)) - /* Fix misunderstood receive overflow */ - fifo_avail_space -= SPI_FIFO_OVERFLOW_MARGIN; - n = min(remaining_writes, fifo_avail_space); - - dev_dbg(&drv_data->pdev->dev, - "write type %s\n" - " remaining writes = %d\n" - " fifo avail space = %d\n" - " fifo writes = %d\n", - (n_bytes == 1) ? "u8" : "u16", - remaining_writes, - fifo_avail_space, - n); - - if (n > 0) { - /* Fill SPI TXFIFO */ - if (drv_data->rd_only) { - tx += n * n_bytes; - while (n--) - writel(SPI_DUMMY_u16, regs + SPI_TXDATA); - } else { - if (n_bytes == 1) { - while (n--) { - d = *(u8*)tx; - writel(d, regs + SPI_TXDATA); - tx += 1; - } - } else { - while (n--) { - d = *(u16*)tx; - writel(d, regs + SPI_TXDATA); - tx += 2; - } - } - } - - /* Trigger transfer */ - writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH, - regs + SPI_CONTROL); - - /* Update tx pointer */ - drv_data->tx = tx; - } - - return (tx >= tx_end); -} - -static int read(struct driver_data *drv_data) -{ - void __iomem *regs = drv_data->regs; - void *rx = drv_data->rx; - void *rx_end = drv_data->rx_end; - u8 n_bytes = drv_data->n_bytes; - u32 remaining_reads; - u32 fifo_rxcnt; - u32 n; - u16 d; - - /* Compute how many fifo reads to do */ - remaining_reads = (u32)(rx_end - rx) / n_bytes; - fifo_rxcnt = (readl(regs + SPI_TEST) & SPI_TEST_RXCNT) >> - SPI_TEST_RXCNT_LSB; - n = min(remaining_reads, fifo_rxcnt); - - dev_dbg(&drv_data->pdev->dev, - "read type %s\n" - " remaining reads = %d\n" - " fifo rx count = %d\n" - " fifo reads = %d\n", - (n_bytes == 1) ? "u8" : "u16", - remaining_reads, - fifo_rxcnt, - n); - - if (n > 0) { - /* Read SPI RXFIFO */ - if (n_bytes == 1) { - while (n--) { - d = readl(regs + SPI_RXDATA); - *((u8*)rx) = d; - rx += 1; - } - } else { - while (n--) { - d = readl(regs + SPI_RXDATA); - *((u16*)rx) = d; - rx += 2; - } - } - - /* Update rx pointer */ - drv_data->rx = rx; - } - - return (rx >= rx_end); -} - -static void *next_transfer(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - struct spi_transfer *trans = drv_data->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - drv_data->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, - transfer_list); - return RUNNING_STATE; - } - - return DONE_STATE; -} - -static int map_dma_buffers(struct driver_data *drv_data) -{ - struct spi_message *msg; - struct device *dev; - void *buf; - - drv_data->rx_dma_needs_unmap = 0; - drv_data->tx_dma_needs_unmap = 0; - - if (!drv_data->master_info->enable_dma || - !drv_data->cur_chip->enable_dma) - return -1; - - msg = drv_data->cur_msg; - dev = &msg->spi->dev; - if (msg->is_dma_mapped) { - if (drv_data->tx_dma) - /* The caller provided at least dma and cpu virtual - address for write; pump_transfers() will consider the - transfer as write only if cpu rx virtual address is - NULL */ - return 0; - - if (drv_data->rx_dma) { - /* The caller provided dma and cpu virtual address to - performe read only transfer --> - use drv_data->dummy_dma_buf for dummy writes to - achive reads */ - buf = &drv_data->dummy_dma_buf; - drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf); - drv_data->tx_dma = dma_map_single(dev, - buf, - drv_data->tx_map_len, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, drv_data->tx_dma)) - return -1; - - drv_data->tx_dma_needs_unmap = 1; - - /* Flags transfer as rd_only for pump_transfers() DMA - regs programming (should be redundant) */ - drv_data->tx = NULL; - - return 0; - } - } - - if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) - return -1; - - if (drv_data->tx == NULL) { - /* Read only message --> use drv_data->dummy_dma_buf for dummy - writes to achive reads */ - buf = &drv_data->dummy_dma_buf; - drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf); - } else { - buf = drv_data->tx; - drv_data->tx_map_len = drv_data->len; - } - drv_data->tx_dma = dma_map_single(dev, - buf, - drv_data->tx_map_len, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, drv_data->tx_dma)) - return -1; - drv_data->tx_dma_needs_unmap = 1; - - /* NULL rx means write-only transfer and no map needed - * since rx DMA will not be used */ - if (drv_data->rx) { - buf = drv_data->rx; - drv_data->rx_dma = dma_map_single(dev, - buf, - drv_data->len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, drv_data->rx_dma)) { - if (drv_data->tx_dma) { - dma_unmap_single(dev, - drv_data->tx_dma, - drv_data->tx_map_len, - DMA_TO_DEVICE); - drv_data->tx_dma_needs_unmap = 0; - } - return -1; - } - drv_data->rx_dma_needs_unmap = 1; - } - - return 0; -} - -static void unmap_dma_buffers(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - struct device *dev = &msg->spi->dev; - - if (drv_data->rx_dma_needs_unmap) { - dma_unmap_single(dev, - drv_data->rx_dma, - drv_data->len, - DMA_FROM_DEVICE); - drv_data->rx_dma_needs_unmap = 0; - } - if (drv_data->tx_dma_needs_unmap) { - dma_unmap_single(dev, - drv_data->tx_dma, - drv_data->tx_map_len, - DMA_TO_DEVICE); - drv_data->tx_dma_needs_unmap = 0; - } -} - -/* Caller already set message->status (dma is already blocked) */ -static void giveback(struct spi_message *message, struct driver_data *drv_data) -{ - void __iomem *regs = drv_data->regs; - - /* Bring SPI to sleep; restore_state() and pump_transfer() - will do new setup */ - writel(0, regs + SPI_INT_STATUS); - writel(0, regs + SPI_DMA); - - /* Unconditioned deselct */ - drv_data->cs_control(SPI_CS_DEASSERT); - - message->state = NULL; - if (message->complete) - message->complete(message->context); - - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - queue_work(drv_data->workqueue, &drv_data->work); -} - -static void dma_err_handler(int channel, void *data, int errcode) -{ - struct driver_data *drv_data = data; - struct spi_message *msg = drv_data->cur_msg; - - dev_dbg(&drv_data->pdev->dev, "dma_err_handler\n"); - - /* Disable both rx and tx dma channels */ - imx_dma_disable(drv_data->rx_channel); - imx_dma_disable(drv_data->tx_channel); - unmap_dma_buffers(drv_data); - - flush(drv_data); - - msg->state = ERROR_STATE; - tasklet_schedule(&drv_data->pump_transfers); -} - -static void dma_tx_handler(int channel, void *data) -{ - struct driver_data *drv_data = data; - - dev_dbg(&drv_data->pdev->dev, "dma_tx_handler\n"); - - imx_dma_disable(channel); - - /* Now waits for TX FIFO empty */ - writel(SPI_INTEN_TE, drv_data->regs + SPI_INT_STATUS); -} - -static irqreturn_t dma_transfer(struct driver_data *drv_data) -{ - u32 status; - struct spi_message *msg = drv_data->cur_msg; - void __iomem *regs = drv_data->regs; - - status = readl(regs + SPI_INT_STATUS); - - if ((status & (SPI_INTEN_RO | SPI_STATUS_RO)) - == (SPI_INTEN_RO | SPI_STATUS_RO)) { - writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS); - - imx_dma_disable(drv_data->tx_channel); - imx_dma_disable(drv_data->rx_channel); - unmap_dma_buffers(drv_data); - - flush(drv_data); - - dev_warn(&drv_data->pdev->dev, - "dma_transfer - fifo overun\n"); - - msg->state = ERROR_STATE; - tasklet_schedule(&drv_data->pump_transfers); - - return IRQ_HANDLED; - } - - if (status & SPI_STATUS_TE) { - writel(status & ~SPI_INTEN_TE, regs + SPI_INT_STATUS); - - if (drv_data->rx) { - /* Wait end of transfer before read trailing data */ - while (readl(regs + SPI_CONTROL) & SPI_CONTROL_XCH) - cpu_relax(); - - imx_dma_disable(drv_data->rx_channel); - unmap_dma_buffers(drv_data); - - /* Release chip select if requested, transfer delays are - handled in pump_transfers() */ - if (drv_data->cs_change) - drv_data->cs_control(SPI_CS_DEASSERT); - - /* Calculate number of trailing data and read them */ - dev_dbg(&drv_data->pdev->dev, - "dma_transfer - test = 0x%08X\n", - readl(regs + SPI_TEST)); - drv_data->rx = drv_data->rx_end - - ((readl(regs + SPI_TEST) & - SPI_TEST_RXCNT) >> - SPI_TEST_RXCNT_LSB)*drv_data->n_bytes; - read(drv_data); - } else { - /* Write only transfer */ - unmap_dma_buffers(drv_data); - - flush(drv_data); - } - - /* End of transfer, update total byte transfered */ - msg->actual_length += drv_data->len; - - /* Move to next transfer */ - msg->state = next_transfer(drv_data); - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); - - return IRQ_HANDLED; - } - - /* Opps problem detected */ - return IRQ_NONE; -} - -static irqreturn_t interrupt_wronly_transfer(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - void __iomem *regs = drv_data->regs; - u32 status; - irqreturn_t handled = IRQ_NONE; - - status = readl(regs + SPI_INT_STATUS); - - if (status & SPI_INTEN_TE) { - /* TXFIFO Empty Interrupt on the last transfered word */ - writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS); - dev_dbg(&drv_data->pdev->dev, - "interrupt_wronly_transfer - end of tx\n"); - - flush(drv_data); - - /* Update total byte transfered */ - msg->actual_length += drv_data->len; - - /* Move to next transfer */ - msg->state = next_transfer(drv_data); - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); - - return IRQ_HANDLED; - } else { - while (status & SPI_STATUS_TH) { - dev_dbg(&drv_data->pdev->dev, - "interrupt_wronly_transfer - status = 0x%08X\n", - status); - - /* Pump data */ - if (write(drv_data)) { - /* End of TXFIFO writes, - now wait until TXFIFO is empty */ - writel(SPI_INTEN_TE, regs + SPI_INT_STATUS); - return IRQ_HANDLED; - } - - status = readl(regs + SPI_INT_STATUS); - - /* We did something */ - handled = IRQ_HANDLED; - } - } - - return handled; -} - -static irqreturn_t interrupt_transfer(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - void __iomem *regs = drv_data->regs; - u32 status, control; - irqreturn_t handled = IRQ_NONE; - unsigned long limit; - - status = readl(regs + SPI_INT_STATUS); - - if (status & SPI_INTEN_TE) { - /* TXFIFO Empty Interrupt on the last transfered word */ - writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS); - dev_dbg(&drv_data->pdev->dev, - "interrupt_transfer - end of tx\n"); - - if (msg->state == ERROR_STATE) { - /* RXFIFO overrun was detected and message aborted */ - flush(drv_data); - } else { - /* Wait for end of transaction */ - do { - control = readl(regs + SPI_CONTROL); - } while (control & SPI_CONTROL_XCH); - - /* Release chip select if requested, transfer delays are - handled in pump_transfers */ - if (drv_data->cs_change) - drv_data->cs_control(SPI_CS_DEASSERT); - - /* Read trailing bytes */ - limit = loops_per_jiffy << 1; - while ((read(drv_data) == 0) && --limit) - cpu_relax(); - - if (limit == 0) - dev_err(&drv_data->pdev->dev, - "interrupt_transfer - " - "trailing byte read failed\n"); - else - dev_dbg(&drv_data->pdev->dev, - "interrupt_transfer - end of rx\n"); - - /* Update total byte transfered */ - msg->actual_length += drv_data->len; - - /* Move to next transfer */ - msg->state = next_transfer(drv_data); - } - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); - - return IRQ_HANDLED; - } else { - while (status & (SPI_STATUS_TH | SPI_STATUS_RO)) { - dev_dbg(&drv_data->pdev->dev, - "interrupt_transfer - status = 0x%08X\n", - status); - - if (status & SPI_STATUS_RO) { - /* RXFIFO overrun, abort message end wait - until TXFIFO is empty */ - writel(SPI_INTEN_TE, regs + SPI_INT_STATUS); - - dev_warn(&drv_data->pdev->dev, - "interrupt_transfer - fifo overun\n" - " data not yet written = %d\n" - " data not yet read = %d\n", - data_to_write(drv_data), - data_to_read(drv_data)); - - msg->state = ERROR_STATE; - - return IRQ_HANDLED; - } - - /* Pump data */ - read(drv_data); - if (write(drv_data)) { - /* End of TXFIFO writes, - now wait until TXFIFO is empty */ - writel(SPI_INTEN_TE, regs + SPI_INT_STATUS); - return IRQ_HANDLED; - } - - status = readl(regs + SPI_INT_STATUS); - - /* We did something */ - handled = IRQ_HANDLED; - } - } - - return handled; -} - -static irqreturn_t spi_int(int irq, void *dev_id) -{ - struct driver_data *drv_data = (struct driver_data *)dev_id; - - if (!drv_data->cur_msg) { - dev_err(&drv_data->pdev->dev, - "spi_int - bad message state\n"); - /* Never fail */ - return IRQ_HANDLED; - } - - return drv_data->transfer_handler(drv_data); -} - -static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate) -{ - return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13)); -} - -static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz) -{ - u32 div; - u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2; - - for (div = SPI_PERCLK2_DIV_MIN; - div <= SPI_PERCLK2_DIV_MAX; - div++, quantized_hz >>= 1) { - if (quantized_hz <= speed_hz) - /* Max available speed LEQ required speed */ - return div << 13; - } - return SPI_CONTROL_DATARATE_BAD; -} - -static void pump_transfers(unsigned long data) -{ - struct driver_data *drv_data = (struct driver_data *)data; - struct spi_message *message; - struct spi_transfer *transfer, *previous; - struct chip_data *chip; - void __iomem *regs; - u32 tmp, control; - - dev_dbg(&drv_data->pdev->dev, "pump_transfer\n"); - - message = drv_data->cur_msg; - - /* Handle for abort */ - if (message->state == ERROR_STATE) { - message->status = -EIO; - giveback(message, drv_data); - return; - } - - /* Handle end of message */ - if (message->state == DONE_STATE) { - message->status = 0; - giveback(message, drv_data); - return; - } - - chip = drv_data->cur_chip; - - /* Delay if requested at end of transfer*/ - transfer = drv_data->cur_transfer; - if (message->state == RUNNING_STATE) { - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, - transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - } else { - /* START_STATE */ - message->state = RUNNING_STATE; - drv_data->cs_control = chip->cs_control; - } - - transfer = drv_data->cur_transfer; - drv_data->tx = (void *)transfer->tx_buf; - drv_data->tx_end = drv_data->tx + transfer->len; - drv_data->rx = transfer->rx_buf; - drv_data->rx_end = drv_data->rx + transfer->len; - drv_data->rx_dma = transfer->rx_dma; - drv_data->tx_dma = transfer->tx_dma; - drv_data->len = transfer->len; - drv_data->cs_change = transfer->cs_change; - drv_data->rd_only = (drv_data->tx == NULL); - - regs = drv_data->regs; - control = readl(regs + SPI_CONTROL); - - /* Bits per word setup */ - tmp = transfer->bits_per_word; - if (tmp == 0) { - /* Use device setup */ - tmp = chip->bits_per_word; - drv_data->n_bytes = chip->n_bytes; - } else - /* Use per-transfer setup */ - drv_data->n_bytes = (tmp <= 8) ? 1 : 2; - u32_EDIT(control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1); - - /* Speed setup (surely valid because already checked) */ - tmp = transfer->speed_hz; - if (tmp == 0) - tmp = chip->max_speed_hz; - tmp = spi_data_rate(drv_data, tmp); - u32_EDIT(control, SPI_CONTROL_DATARATE, tmp); - - writel(control, regs + SPI_CONTROL); - - /* Assert device chip-select */ - drv_data->cs_control(SPI_CS_ASSERT); - - /* DMA cannot read/write SPI FIFOs other than 16 bits at a time; hence - if bits_per_word is less or equal 8 PIO transfers are performed. - Moreover DMA is convinient for transfer length bigger than FIFOs - byte size. */ - if ((drv_data->n_bytes == 2) && - (drv_data->len > SPI_FIFO_DEPTH*SPI_FIFO_BYTE_WIDTH) && - (map_dma_buffers(drv_data) == 0)) { - dev_dbg(&drv_data->pdev->dev, - "pump dma transfer\n" - " tx = %p\n" - " tx_dma = %08X\n" - " rx = %p\n" - " rx_dma = %08X\n" - " len = %d\n", - drv_data->tx, - (unsigned int)drv_data->tx_dma, - drv_data->rx, - (unsigned int)drv_data->rx_dma, - drv_data->len); - - /* Ensure we have the correct interrupt handler */ - drv_data->transfer_handler = dma_transfer; - - /* Trigger transfer */ - writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH, - regs + SPI_CONTROL); - - /* Setup tx DMA */ - if (drv_data->tx) - /* Linear source address */ - CCR(drv_data->tx_channel) = - CCR_DMOD_FIFO | - CCR_SMOD_LINEAR | - CCR_SSIZ_32 | CCR_DSIZ_16 | - CCR_REN; - else - /* Read only transfer -> fixed source address for - dummy write to achive read */ - CCR(drv_data->tx_channel) = - CCR_DMOD_FIFO | - CCR_SMOD_FIFO | - CCR_SSIZ_32 | CCR_DSIZ_16 | - CCR_REN; - - imx_dma_setup_single( - drv_data->tx_channel, - drv_data->tx_dma, - drv_data->len, - drv_data->rd_data_phys + 4, - DMA_MODE_WRITE); - - if (drv_data->rx) { - /* Setup rx DMA for linear destination address */ - CCR(drv_data->rx_channel) = - CCR_DMOD_LINEAR | - CCR_SMOD_FIFO | - CCR_DSIZ_32 | CCR_SSIZ_16 | - CCR_REN; - imx_dma_setup_single( - drv_data->rx_channel, - drv_data->rx_dma, - drv_data->len, - drv_data->rd_data_phys, - DMA_MODE_READ); - imx_dma_enable(drv_data->rx_channel); - - /* Enable SPI interrupt */ - writel(SPI_INTEN_RO, regs + SPI_INT_STATUS); - - /* Set SPI to request DMA service on both - Rx and Tx half fifo watermark */ - writel(SPI_DMA_RHDEN | SPI_DMA_THDEN, regs + SPI_DMA); - } else - /* Write only access -> set SPI to request DMA - service on Tx half fifo watermark */ - writel(SPI_DMA_THDEN, regs + SPI_DMA); - - imx_dma_enable(drv_data->tx_channel); - } else { - dev_dbg(&drv_data->pdev->dev, - "pump pio transfer\n" - " tx = %p\n" - " rx = %p\n" - " len = %d\n", - drv_data->tx, - drv_data->rx, - drv_data->len); - - /* Ensure we have the correct interrupt handler */ - if (drv_data->rx) - drv_data->transfer_handler = interrupt_transfer; - else - drv_data->transfer_handler = interrupt_wronly_transfer; - - /* Enable SPI interrupt */ - if (drv_data->rx) - writel(SPI_INTEN_TH | SPI_INTEN_RO, - regs + SPI_INT_STATUS); - else - writel(SPI_INTEN_TH, regs + SPI_INT_STATUS); - } -} - -static void pump_messages(struct work_struct *work) -{ - struct driver_data *drv_data = - container_of(work, struct driver_data, work); - unsigned long flags; - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { - drv_data->busy = 0; - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (drv_data->cur_msg) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Extract head of queue */ - drv_data->cur_msg = list_entry(drv_data->queue.next, - struct spi_message, queue); - list_del_init(&drv_data->cur_msg->queue); - drv_data->busy = 1; - spin_unlock_irqrestore(&drv_data->lock, flags); - - /* Initial message state */ - drv_data->cur_msg->state = START_STATE; - drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, - struct spi_transfer, - transfer_list); - - /* Setup the SPI using the per chip configuration */ - drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); - restore_state(drv_data); - - /* Mark as busy and launch transfers */ - tasklet_schedule(&drv_data->pump_transfers); -} - -static int transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - u32 min_speed_hz, max_speed_hz, tmp; - struct spi_transfer *trans; - unsigned long flags; - - msg->actual_length = 0; - - /* Per transfer setup check */ - min_speed_hz = spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN); - max_speed_hz = spi->max_speed_hz; - list_for_each_entry(trans, &msg->transfers, transfer_list) { - tmp = trans->bits_per_word; - if (tmp > 16) { - dev_err(&drv_data->pdev->dev, - "message rejected : " - "invalid transfer bits_per_word (%d bits)\n", - tmp); - goto msg_rejected; - } - tmp = trans->speed_hz; - if (tmp) { - if (tmp < min_speed_hz) { - dev_err(&drv_data->pdev->dev, - "message rejected : " - "device min speed (%d Hz) exceeds " - "required transfer speed (%d Hz)\n", - min_speed_hz, - tmp); - goto msg_rejected; - } else if (tmp > max_speed_hz) { - dev_err(&drv_data->pdev->dev, - "message rejected : " - "transfer speed (%d Hz) exceeds " - "device max speed (%d Hz)\n", - tmp, - max_speed_hz); - goto msg_rejected; - } - } - } - - /* Message accepted */ - msg->status = -EINPROGRESS; - msg->state = START_STATE; - - spin_lock_irqsave(&drv_data->lock, flags); - if (drv_data->run == QUEUE_STOPPED) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -ESHUTDOWN; - } - - list_add_tail(&msg->queue, &drv_data->queue); - if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) - queue_work(drv_data->workqueue, &drv_data->work); - - spin_unlock_irqrestore(&drv_data->lock, flags); - return 0; - -msg_rejected: - /* Message rejected and not queued */ - msg->status = -EINVAL; - msg->state = ERROR_STATE; - if (msg->complete) - msg->complete(msg->context); - return -EINVAL; -} - -/* On first setup bad values must free chip_data memory since will cause - spi_new_device to fail. Bad value setup from protocol driver are simply not - applied and notified to the calling driver. */ -static int setup(struct spi_device *spi) -{ - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - struct spi_imx_chip *chip_info; - struct chip_data *chip; - int first_setup = 0; - u32 tmp; - int status = 0; - - /* Get controller data */ - chip_info = spi->controller_data; - - /* Get controller_state */ - chip = spi_get_ctldata(spi); - if (chip == NULL) { - first_setup = 1; - - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) { - dev_err(&spi->dev, - "setup - cannot allocate controller state\n"); - return -ENOMEM; - } - chip->control = SPI_DEFAULT_CONTROL; - - if (chip_info == NULL) { - /* spi_board_info.controller_data not is supplied */ - chip_info = kzalloc(sizeof(struct spi_imx_chip), - GFP_KERNEL); - if (!chip_info) { - dev_err(&spi->dev, - "setup - " - "cannot allocate controller data\n"); - status = -ENOMEM; - goto err_first_setup; - } - /* Set controller data default value */ - chip_info->enable_loopback = - SPI_DEFAULT_ENABLE_LOOPBACK; - chip_info->enable_dma = SPI_DEFAULT_ENABLE_DMA; - chip_info->ins_ss_pulse = 1; - chip_info->bclk_wait = SPI_DEFAULT_PERIOD_WAIT; - chip_info->cs_control = null_cs_control; - } - } - - /* Now set controller state based on controller data */ - - if (first_setup) { - /* SPI loopback */ - if (chip_info->enable_loopback) - chip->test = SPI_TEST_LBC; - else - chip->test = 0; - - /* SPI dma driven */ - chip->enable_dma = chip_info->enable_dma; - - /* SPI /SS pulse between spi burst */ - if (chip_info->ins_ss_pulse) - u32_EDIT(chip->control, - SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_1); - else - u32_EDIT(chip->control, - SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_0); - - /* SPI bclk waits between each bits_per_word spi burst */ - if (chip_info->bclk_wait > SPI_PERIOD_MAX_WAIT) { - dev_err(&spi->dev, - "setup - " - "bclk_wait exceeds max allowed (%d)\n", - SPI_PERIOD_MAX_WAIT); - goto err_first_setup; - } - chip->period = SPI_PERIOD_CSRC_BCLK | - (chip_info->bclk_wait & SPI_PERIOD_WAIT); - } - - /* SPI mode */ - tmp = spi->mode; - if (tmp & SPI_CS_HIGH) { - u32_EDIT(chip->control, - SPI_CONTROL_SSPOL, SPI_CONTROL_SSPOL_ACT_HIGH); - } - switch (tmp & SPI_MODE_3) { - case SPI_MODE_0: - tmp = 0; - break; - case SPI_MODE_1: - tmp = SPI_CONTROL_PHA_1; - break; - case SPI_MODE_2: - tmp = SPI_CONTROL_POL_ACT_LOW; - break; - default: - /* SPI_MODE_3 */ - tmp = SPI_CONTROL_PHA_1 | SPI_CONTROL_POL_ACT_LOW; - break; - } - u32_EDIT(chip->control, SPI_CONTROL_POL | SPI_CONTROL_PHA, tmp); - - /* SPI word width */ - tmp = spi->bits_per_word; - if (tmp > 16) { - status = -EINVAL; - dev_err(&spi->dev, - "setup - " - "invalid bits_per_word (%d)\n", - tmp); - if (first_setup) - goto err_first_setup; - else { - /* Undo setup using chip as backup copy */ - tmp = chip->bits_per_word; - spi->bits_per_word = tmp; - } - } - chip->bits_per_word = tmp; - u32_EDIT(chip->control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1); - chip->n_bytes = (tmp <= 8) ? 1 : 2; - - /* SPI datarate */ - tmp = spi_data_rate(drv_data, spi->max_speed_hz); - if (tmp == SPI_CONTROL_DATARATE_BAD) { - status = -EINVAL; - dev_err(&spi->dev, - "setup - " - "HW min speed (%d Hz) exceeds required " - "max speed (%d Hz)\n", - spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN), - spi->max_speed_hz); - if (first_setup) - goto err_first_setup; - else - /* Undo setup using chip as backup copy */ - spi->max_speed_hz = chip->max_speed_hz; - } else { - u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp); - /* Actual rounded max_speed_hz */ - tmp = spi_speed_hz(drv_data, tmp); - spi->max_speed_hz = tmp; - chip->max_speed_hz = tmp; - } - - /* SPI chip-select management */ - if (chip_info->cs_control) - chip->cs_control = chip_info->cs_control; - else - chip->cs_control = null_cs_control; - - /* Save controller_state */ - spi_set_ctldata(spi, chip); - - /* Summary */ - dev_dbg(&spi->dev, - "setup succeded\n" - " loopback enable = %s\n" - " dma enable = %s\n" - " insert /ss pulse = %s\n" - " period wait = %d\n" - " mode = %d\n" - " bits per word = %d\n" - " min speed = %d Hz\n" - " rounded max speed = %d Hz\n", - chip->test & SPI_TEST_LBC ? "Yes" : "No", - chip->enable_dma ? "Yes" : "No", - chip->control & SPI_CONTROL_SSCTL ? "Yes" : "No", - chip->period & SPI_PERIOD_WAIT, - spi->mode, - spi->bits_per_word, - spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN), - spi->max_speed_hz); - return status; - -err_first_setup: - kfree(chip); - return status; -} - -static void cleanup(struct spi_device *spi) -{ - kfree(spi_get_ctldata(spi)); -} - -static int __init init_queue(struct driver_data *drv_data) -{ - INIT_LIST_HEAD(&drv_data->queue); - spin_lock_init(&drv_data->lock); - - drv_data->run = QUEUE_STOPPED; - drv_data->busy = 0; - - tasklet_init(&drv_data->pump_transfers, - pump_transfers, (unsigned long)drv_data); - - INIT_WORK(&drv_data->work, pump_messages); - drv_data->workqueue = create_singlethread_workqueue( - dev_name(drv_data->master->dev.parent)); - if (drv_data->workqueue == NULL) - return -EBUSY; - - return 0; -} - -static int start_queue(struct driver_data *drv_data) -{ - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -EBUSY; - } - - drv_data->run = QUEUE_RUNNING; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - spin_unlock_irqrestore(&drv_data->lock, flags); - - queue_work(drv_data->workqueue, &drv_data->work); - - return 0; -} - -static int stop_queue(struct driver_data *drv_data) -{ - unsigned long flags; - unsigned limit = 500; - int status = 0; - - spin_lock_irqsave(&drv_data->lock, flags); - - /* This is a bit lame, but is optimized for the common execution path. - * A wait_queue on the drv_data->busy could be used, but then the common - * execution path (pump_messages) would be required to call wake_up or - * friends on every SPI message. Do this instead */ - drv_data->run = QUEUE_STOPPED; - while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { - spin_unlock_irqrestore(&drv_data->lock, flags); - msleep(10); - spin_lock_irqsave(&drv_data->lock, flags); - } - - if (!list_empty(&drv_data->queue) || drv_data->busy) - status = -EBUSY; - - spin_unlock_irqrestore(&drv_data->lock, flags); - - return status; -} - -static int destroy_queue(struct driver_data *drv_data) -{ - int status; - - status = stop_queue(drv_data); - if (status != 0) - return status; - - if (drv_data->workqueue) - destroy_workqueue(drv_data->workqueue); - - return 0; -} - -static int __init spi_imx_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct spi_imx_master *platform_info; - struct spi_master *master; - struct driver_data *drv_data; - struct resource *res; - int irq, status = 0; - - platform_info = dev->platform_data; - if (platform_info == NULL) { - dev_err(&pdev->dev, "probe - no platform data supplied\n"); - status = -ENODEV; - goto err_no_pdata; - } - - /* Allocate master with space for drv_data */ - master = spi_alloc_master(dev, sizeof(struct driver_data)); - if (!master) { - dev_err(&pdev->dev, "probe - cannot alloc spi_master\n"); - status = -ENOMEM; - goto err_no_mem; - } - drv_data = spi_master_get_devdata(master); - drv_data->master = master; - drv_data->master_info = platform_info; - drv_data->pdev = pdev; - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - master->bus_num = pdev->id; - master->num_chipselect = platform_info->num_chipselect; - master->dma_alignment = DMA_ALIGNMENT; - master->cleanup = cleanup; - master->setup = setup; - master->transfer = transfer; - - drv_data->dummy_dma_buf = SPI_DUMMY_u32; - - drv_data->clk = clk_get(&pdev->dev, "perclk2"); - if (IS_ERR(drv_data->clk)) { - dev_err(&pdev->dev, "probe - cannot get clock\n"); - status = PTR_ERR(drv_data->clk); - goto err_no_clk; - } - clk_enable(drv_data->clk); - - /* Find and map resources */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "probe - MEM resources not defined\n"); - status = -ENODEV; - goto err_no_iores; - } - drv_data->ioarea = request_mem_region(res->start, - res->end - res->start + 1, - pdev->name); - if (drv_data->ioarea == NULL) { - dev_err(&pdev->dev, "probe - cannot reserve region\n"); - status = -ENXIO; - goto err_no_iores; - } - drv_data->regs = ioremap(res->start, res->end - res->start + 1); - if (drv_data->regs == NULL) { - dev_err(&pdev->dev, "probe - cannot map IO\n"); - status = -ENXIO; - goto err_no_iomap; - } - drv_data->rd_data_phys = (dma_addr_t)res->start; - - /* Attach to IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "probe - IRQ resource not defined\n"); - status = -ENODEV; - goto err_no_irqres; - } - status = request_irq(irq, spi_int, IRQF_DISABLED, - dev_name(dev), drv_data); - if (status < 0) { - dev_err(&pdev->dev, "probe - cannot get IRQ (%d)\n", status); - goto err_no_irqres; - } - - /* Setup DMA if requested */ - drv_data->tx_channel = -1; - drv_data->rx_channel = -1; - if (platform_info->enable_dma) { - /* Get rx DMA channel */ - drv_data->rx_channel = imx_dma_request_by_prio("spi_imx_rx", - DMA_PRIO_HIGH); - if (drv_data->rx_channel < 0) { - dev_err(dev, - "probe - problem (%d) requesting rx channel\n", - drv_data->rx_channel); - goto err_no_rxdma; - } else - imx_dma_setup_handlers(drv_data->rx_channel, NULL, - dma_err_handler, drv_data); - - /* Get tx DMA channel */ - drv_data->tx_channel = imx_dma_request_by_prio("spi_imx_tx", - DMA_PRIO_MEDIUM); - if (drv_data->tx_channel < 0) { - dev_err(dev, - "probe - problem (%d) requesting tx channel\n", - drv_data->tx_channel); - imx_dma_free(drv_data->rx_channel); - goto err_no_txdma; - } else - imx_dma_setup_handlers(drv_data->tx_channel, - dma_tx_handler, dma_err_handler, - drv_data); - - /* Set request source and burst length for allocated channels */ - switch (drv_data->pdev->id) { - case 1: - /* Using SPI1 */ - RSSR(drv_data->rx_channel) = DMA_REQ_SPI1_R; - RSSR(drv_data->tx_channel) = DMA_REQ_SPI1_T; - break; - case 2: - /* Using SPI2 */ - RSSR(drv_data->rx_channel) = DMA_REQ_SPI2_R; - RSSR(drv_data->tx_channel) = DMA_REQ_SPI2_T; - break; - default: - dev_err(dev, "probe - bad SPI Id\n"); - imx_dma_free(drv_data->rx_channel); - imx_dma_free(drv_data->tx_channel); - status = -ENODEV; - goto err_no_devid; - } - BLR(drv_data->rx_channel) = SPI_DMA_BLR; - BLR(drv_data->tx_channel) = SPI_DMA_BLR; - } - - /* Load default SPI configuration */ - writel(SPI_RESET_START, drv_data->regs + SPI_RESET); - writel(0, drv_data->regs + SPI_RESET); - writel(SPI_DEFAULT_CONTROL, drv_data->regs + SPI_CONTROL); - - /* Initial and start queue */ - status = init_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "probe - problem initializing queue\n"); - goto err_init_queue; - } - status = start_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "probe - problem starting queue\n"); - goto err_start_queue; - } - - /* Register with the SPI framework */ - platform_set_drvdata(pdev, drv_data); - status = spi_register_master(master); - if (status != 0) { - dev_err(&pdev->dev, "probe - problem registering spi master\n"); - goto err_spi_register; - } - - dev_dbg(dev, "probe succeded\n"); - return 0; - -err_init_queue: -err_start_queue: -err_spi_register: - destroy_queue(drv_data); - -err_no_rxdma: -err_no_txdma: -err_no_devid: - free_irq(irq, drv_data); - -err_no_irqres: - iounmap(drv_data->regs); - -err_no_iomap: - release_resource(drv_data->ioarea); - kfree(drv_data->ioarea); - -err_no_iores: - clk_disable(drv_data->clk); - clk_put(drv_data->clk); - -err_no_clk: - spi_master_put(master); - -err_no_pdata: -err_no_mem: - return status; -} - -static int __exit spi_imx_remove(struct platform_device *pdev) -{ - struct driver_data *drv_data = platform_get_drvdata(pdev); - int irq; - int status = 0; - - if (!drv_data) - return 0; - - tasklet_kill(&drv_data->pump_transfers); - - /* Remove the queue */ - status = destroy_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "queue remove failed (%d)\n", status); - return status; - } - - /* Reset SPI */ - writel(SPI_RESET_START, drv_data->regs + SPI_RESET); - writel(0, drv_data->regs + SPI_RESET); - - /* Release DMA */ - if (drv_data->master_info->enable_dma) { - RSSR(drv_data->rx_channel) = 0; - RSSR(drv_data->tx_channel) = 0; - imx_dma_free(drv_data->tx_channel); - imx_dma_free(drv_data->rx_channel); - } - - /* Release IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq >= 0) - free_irq(irq, drv_data); - - clk_disable(drv_data->clk); - clk_put(drv_data->clk); - - /* Release map resources */ - iounmap(drv_data->regs); - release_resource(drv_data->ioarea); - kfree(drv_data->ioarea); - - /* Disconnect from the SPI framework */ - spi_unregister_master(drv_data->master); - spi_master_put(drv_data->master); - - /* Prevent double remove */ - platform_set_drvdata(pdev, NULL); - - dev_dbg(&pdev->dev, "remove succeded\n"); - - return 0; -} - -static void spi_imx_shutdown(struct platform_device *pdev) -{ - struct driver_data *drv_data = platform_get_drvdata(pdev); - - /* Reset SPI */ - writel(SPI_RESET_START, drv_data->regs + SPI_RESET); - writel(0, drv_data->regs + SPI_RESET); - - dev_dbg(&pdev->dev, "shutdown succeded\n"); -} - -#ifdef CONFIG_PM - -static int spi_imx_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct driver_data *drv_data = platform_get_drvdata(pdev); - int status = 0; - - status = stop_queue(drv_data); - if (status != 0) { - dev_warn(&pdev->dev, "suspend cannot stop queue\n"); - return status; - } - - dev_dbg(&pdev->dev, "suspended\n"); - - return 0; -} - -static int spi_imx_resume(struct platform_device *pdev) -{ - struct driver_data *drv_data = platform_get_drvdata(pdev); - int status = 0; - - /* Start the queue running */ - status = start_queue(drv_data); - if (status != 0) - dev_err(&pdev->dev, "problem starting queue (%d)\n", status); - else - dev_dbg(&pdev->dev, "resumed\n"); - - return status; -} -#else -#define spi_imx_suspend NULL -#define spi_imx_resume NULL -#endif /* CONFIG_PM */ - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:spi_imx"); - -static struct platform_driver driver = { - .driver = { - .name = "spi_imx", - .owner = THIS_MODULE, - }, - .remove = __exit_p(spi_imx_remove), - .shutdown = spi_imx_shutdown, - .suspend = spi_imx_suspend, - .resume = spi_imx_resume, -}; - -static int __init spi_imx_init(void) -{ - return platform_driver_probe(&driver, spi_imx_probe); -} -module_init(spi_imx_init); - -static void __exit spi_imx_exit(void) -{ - platform_driver_unregister(&driver); -} -module_exit(spi_imx_exit); - -MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>"); -MODULE_DESCRIPTION("iMX SPI Controller Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c new file mode 100644 index 000000000000..140a18d6cf3e --- /dev/null +++ b/drivers/spi/spi_ppc4xx.c @@ -0,0 +1,612 @@ +/* + * SPI_PPC4XX SPI controller driver. + * + * Copyright (C) 2007 Gary Jennejohn <garyj@denx.de> + * Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering + * Copyright 2009 Harris Corporation, Steven A. Falco <sfalco@harris.com> + * + * Based in part on drivers/spi/spi_s3c24xx.c + * + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +/* + * The PPC4xx SPI controller has no FIFO so each sent/received byte will + * generate an interrupt to the CPU. This can cause high CPU utilization. + * This driver allows platforms to reduce the interrupt load on the CPU + * during SPI transfers by setting max_speed_hz via the device tree. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/of_platform.h> +#include <linux/of_spi.h> +#include <linux/of_gpio.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> + +#include <asm/io.h> +#include <asm/dcr.h> +#include <asm/dcr-regs.h> + +/* bits in mode register - bit 0 is MSb */ + +/* + * SPI_PPC4XX_MODE_SCP = 0 means "data latched on trailing edge of clock" + * SPI_PPC4XX_MODE_SCP = 1 means "data latched on leading edge of clock" + * Note: This is the inverse of CPHA. + */ +#define SPI_PPC4XX_MODE_SCP (0x80 >> 3) + +/* SPI_PPC4XX_MODE_SPE = 1 means "port enabled" */ +#define SPI_PPC4XX_MODE_SPE (0x80 >> 4) + +/* + * SPI_PPC4XX_MODE_RD = 0 means "MSB first" - this is the normal mode + * SPI_PPC4XX_MODE_RD = 1 means "LSB first" - this is bit-reversed mode + * Note: This is identical to SPI_LSB_FIRST. + */ +#define SPI_PPC4XX_MODE_RD (0x80 >> 5) + +/* + * SPI_PPC4XX_MODE_CI = 0 means "clock idles low" + * SPI_PPC4XX_MODE_CI = 1 means "clock idles high" + * Note: This is identical to CPOL. + */ +#define SPI_PPC4XX_MODE_CI (0x80 >> 6) + +/* + * SPI_PPC4XX_MODE_IL = 0 means "loopback disable" + * SPI_PPC4XX_MODE_IL = 1 means "loopback enable" + */ +#define SPI_PPC4XX_MODE_IL (0x80 >> 7) + +/* bits in control register */ +/* starts a transfer when set */ +#define SPI_PPC4XX_CR_STR (0x80 >> 7) + +/* bits in status register */ +/* port is busy with a transfer */ +#define SPI_PPC4XX_SR_BSY (0x80 >> 6) +/* RxD ready */ +#define SPI_PPC4XX_SR_RBR (0x80 >> 7) + +/* clock settings (SCP and CI) for various SPI modes */ +#define SPI_CLK_MODE0 (SPI_PPC4XX_MODE_SCP | 0) +#define SPI_CLK_MODE1 (0 | 0) +#define SPI_CLK_MODE2 (SPI_PPC4XX_MODE_SCP | SPI_PPC4XX_MODE_CI) +#define SPI_CLK_MODE3 (0 | SPI_PPC4XX_MODE_CI) + +#define DRIVER_NAME "spi_ppc4xx_of" + +struct spi_ppc4xx_regs { + u8 mode; + u8 rxd; + u8 txd; + u8 cr; + u8 sr; + u8 dummy; + /* + * Clock divisor modulus register + * This uses the follwing formula: + * SCPClkOut = OPBCLK/(4(CDM + 1)) + * or + * CDM = (OPBCLK/4*SCPClkOut) - 1 + * bit 0 is the MSb! + */ + u8 cdm; +}; + +/* SPI Controller driver's private data. */ +struct ppc4xx_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + + u64 mapbase; + u64 mapsize; + int irqnum; + /* need this to set the SPI clock */ + unsigned int opb_freq; + + /* for transfers */ + int len; + int count; + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + + int *gpios; + + struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */ + struct spi_master *master; + struct device *dev; +}; + +/* need this so we can set the clock in the chipselect routine */ +struct spi_ppc4xx_cs { + u8 mode; +}; + +static int spi_ppc4xx_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct ppc4xx_spi *hw; + u8 data; + + dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", + t->tx_buf, t->rx_buf, t->len); + + hw = spi_master_get_devdata(spi->master); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->count = 0; + + /* send the first byte */ + data = hw->tx ? hw->tx[0] : 0; + out_8(&hw->regs->txd, data); + out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); + wait_for_completion(&hw->done); + + return hw->count; +} + +static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); + struct spi_ppc4xx_cs *cs = spi->controller_state; + int scr; + u8 cdm = 0; + u32 speed; + u8 bits_per_word; + + /* Start with the generic configuration for this device. */ + bits_per_word = spi->bits_per_word; + speed = spi->max_speed_hz; + + /* + * Modify the configuration if the transfer overrides it. Do not allow + * the transfer to overwrite the generic configuration with zeros. + */ + if (t) { + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (t->speed_hz) + speed = min(t->speed_hz, spi->max_speed_hz); + } + + if (bits_per_word != 8) { + dev_err(&spi->dev, "invalid bits-per-word (%d)\n", + bits_per_word); + return -EINVAL; + } + + if (!speed || (speed > spi->max_speed_hz)) { + dev_err(&spi->dev, "invalid speed_hz (%d)\n", speed); + return -EINVAL; + } + + /* Write new configration */ + out_8(&hw->regs->mode, cs->mode); + + /* Set the clock */ + /* opb_freq was already divided by 4 */ + scr = (hw->opb_freq / speed) - 1; + if (scr > 0) + cdm = min(scr, 0xff); + + dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", cdm, speed); + + if (in_8(&hw->regs->cdm) != cdm) + out_8(&hw->regs->cdm, cdm); + + spin_lock(&hw->bitbang.lock); + if (!hw->bitbang.busy) { + hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); + /* Need to ndelay here? */ + } + spin_unlock(&hw->bitbang.lock); + + return 0; +} + +static int spi_ppc4xx_setup(struct spi_device *spi) +{ + struct spi_ppc4xx_cs *cs = spi->controller_state; + + if (spi->bits_per_word != 8) { + dev_err(&spi->dev, "invalid bits-per-word (%d)\n", + spi->bits_per_word); + return -EINVAL; + } + + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "invalid max_speed_hz (must be non-zero)\n"); + return -EINVAL; + } + + if (cs == NULL) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + /* + * We set all bits of the SPI0_MODE register, so, + * no need to read-modify-write + */ + cs->mode = SPI_PPC4XX_MODE_SPE; + + switch (spi->mode & (SPI_CPHA | SPI_CPOL)) { + case SPI_MODE_0: + cs->mode |= SPI_CLK_MODE0; + break; + case SPI_MODE_1: + cs->mode |= SPI_CLK_MODE1; + break; + case SPI_MODE_2: + cs->mode |= SPI_CLK_MODE2; + break; + case SPI_MODE_3: + cs->mode |= SPI_CLK_MODE3; + break; + } + + if (spi->mode & SPI_LSB_FIRST) + cs->mode |= SPI_PPC4XX_MODE_RD; + + return 0; +} + +static void spi_ppc4xx_chipsel(struct spi_device *spi, int value) +{ + struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); + unsigned int cs = spi->chip_select; + unsigned int cspol; + + /* + * If there are no chip selects at all, or if this is the special + * case of a non-existent (dummy) chip select, do nothing. + */ + + if (!hw->master->num_chipselect || hw->gpios[cs] == -EEXIST) + return; + + cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; + if (value == BITBANG_CS_INACTIVE) + cspol = !cspol; + + gpio_set_value(hw->gpios[cs], cspol); +} + +static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id) +{ + struct ppc4xx_spi *hw; + u8 status; + u8 data; + unsigned int count; + + hw = (struct ppc4xx_spi *)dev_id; + + status = in_8(&hw->regs->sr); + if (!status) + return IRQ_NONE; + + /* + * BSY de-asserts one cycle after the transfer is complete. The + * interrupt is asserted after the transfer is complete. The exact + * relationship is not documented, hence this code. + */ + + if (unlikely(status & SPI_PPC4XX_SR_BSY)) { + u8 lstatus; + int cnt = 0; + + dev_dbg(hw->dev, "got interrupt but spi still busy?\n"); + do { + ndelay(10); + lstatus = in_8(&hw->regs->sr); + } while (++cnt < 100 && lstatus & SPI_PPC4XX_SR_BSY); + + if (cnt >= 100) { + dev_err(hw->dev, "busywait: too many loops!\n"); + complete(&hw->done); + return IRQ_HANDLED; + } else { + /* status is always 1 (RBR) here */ + status = in_8(&hw->regs->sr); + dev_dbg(hw->dev, "loops %d status %x\n", cnt, status); + } + } + + count = hw->count; + hw->count++; + + /* RBR triggered this interrupt. Therefore, data must be ready. */ + data = in_8(&hw->regs->rxd); + if (hw->rx) + hw->rx[count] = data; + + count++; + + if (count < hw->len) { + data = hw->tx ? hw->tx[count] : 0; + out_8(&hw->regs->txd, data); + out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); + } else { + complete(&hw->done); + } + + return IRQ_HANDLED; +} + +static void spi_ppc4xx_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static void spi_ppc4xx_enable(struct ppc4xx_spi *hw) +{ + /* + * On all 4xx PPC's the SPI bus is shared/multiplexed with + * the 2nd I2C bus. We need to enable the the SPI bus before + * using it. + */ + + /* need to clear bit 14 to enable SPC */ + dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0); +} + +static void free_gpios(struct ppc4xx_spi *hw) +{ + if (hw->master->num_chipselect) { + int i; + for (i = 0; i < hw->master->num_chipselect; i++) + if (gpio_is_valid(hw->gpios[i])) + gpio_free(hw->gpios[i]); + + kfree(hw->gpios); + hw->gpios = NULL; + } +} + +/* + * of_device layer stuff... + */ +static int __init spi_ppc4xx_of_probe(struct of_device *op, + const struct of_device_id *match) +{ + struct ppc4xx_spi *hw; + struct spi_master *master; + struct spi_bitbang *bbp; + struct resource resource; + struct device_node *np = op->node; + struct device *dev = &op->dev; + struct device_node *opbnp; + int ret; + int num_gpios; + const unsigned int *clk; + + master = spi_alloc_master(dev, sizeof *hw); + if (master == NULL) + return -ENOMEM; + dev_set_drvdata(dev, master); + hw = spi_master_get_devdata(master); + hw->master = spi_master_get(master); + hw->dev = dev; + + init_completion(&hw->done); + + /* + * A count of zero implies a single SPI device without any chip-select. + * Note that of_gpio_count counts all gpios assigned to this spi master. + * This includes both "null" gpio's and real ones. + */ + num_gpios = of_gpio_count(np); + if (num_gpios) { + int i; + + hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL); + if (!hw->gpios) { + ret = -ENOMEM; + goto free_master; + } + + for (i = 0; i < num_gpios; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(np, i, &flags); + hw->gpios[i] = gpio; + + if (gpio_is_valid(gpio)) { + /* Real CS - set the initial state. */ + ret = gpio_request(gpio, np->name); + if (ret < 0) { + dev_err(dev, "can't request gpio " + "#%d: %d\n", i, ret); + goto free_gpios; + } + + gpio_direction_output(gpio, + !!(flags & OF_GPIO_ACTIVE_LOW)); + } else if (gpio == -EEXIST) { + ; /* No CS, but that's OK. */ + } else { + dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); + ret = -EINVAL; + goto free_gpios; + } + } + } + + /* Setup the state for the bitbang driver */ + bbp = &hw->bitbang; + bbp->master = hw->master; + bbp->setup_transfer = spi_ppc4xx_setupxfer; + bbp->chipselect = spi_ppc4xx_chipsel; + bbp->txrx_bufs = spi_ppc4xx_txrx; + bbp->use_dma = 0; + bbp->master->setup = spi_ppc4xx_setup; + bbp->master->cleanup = spi_ppc4xx_cleanup; + + /* Allocate bus num dynamically. */ + bbp->master->bus_num = -1; + + /* the spi->mode bits understood by this driver: */ + bbp->master->mode_bits = + SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; + + /* this many pins in all GPIO controllers */ + bbp->master->num_chipselect = num_gpios; + + /* Get the clock for the OPB */ + opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb"); + if (opbnp == NULL) { + dev_err(dev, "OPB: cannot find node\n"); + ret = -ENODEV; + goto free_gpios; + } + /* Get the clock (Hz) for the OPB */ + clk = of_get_property(opbnp, "clock-frequency", NULL); + if (clk == NULL) { + dev_err(dev, "OPB: no clock-frequency property set\n"); + of_node_put(opbnp); + ret = -ENODEV; + goto free_gpios; + } + hw->opb_freq = *clk; + hw->opb_freq >>= 2; + of_node_put(opbnp); + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_err(dev, "error while parsing device node resource\n"); + goto free_gpios; + } + hw->mapbase = resource.start; + hw->mapsize = resource.end - resource.start + 1; + + /* Sanity check */ + if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) { + dev_err(dev, "too small to map registers\n"); + ret = -EINVAL; + goto free_gpios; + } + + /* Request IRQ */ + hw->irqnum = irq_of_parse_and_map(np, 0); + ret = request_irq(hw->irqnum, spi_ppc4xx_int, + IRQF_DISABLED, "spi_ppc4xx_of", (void *)hw); + if (ret) { + dev_err(dev, "unable to allocate interrupt\n"); + goto free_gpios; + } + + if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) { + dev_err(dev, "resource unavailable\n"); + ret = -EBUSY; + goto request_mem_error; + } + + hw->regs = ioremap(hw->mapbase, sizeof(struct spi_ppc4xx_regs)); + + if (!hw->regs) { + dev_err(dev, "unable to memory map registers\n"); + ret = -ENXIO; + goto map_io_error; + } + + spi_ppc4xx_enable(hw); + + /* Finally register our spi controller */ + dev->dma_mask = 0; + ret = spi_bitbang_start(bbp); + if (ret) { + dev_err(dev, "failed to register SPI master\n"); + goto unmap_regs; + } + + dev_info(dev, "driver initialized\n"); + of_register_spi_devices(master, np); + + return 0; + +unmap_regs: + iounmap(hw->regs); +map_io_error: + release_mem_region(hw->mapbase, hw->mapsize); +request_mem_error: + free_irq(hw->irqnum, hw); +free_gpios: + free_gpios(hw); +free_master: + dev_set_drvdata(dev, NULL); + spi_master_put(master); + + dev_err(dev, "initialization failed\n"); + return ret; +} + +static int __exit spi_ppc4xx_of_remove(struct of_device *op) +{ + struct spi_master *master = dev_get_drvdata(&op->dev); + struct ppc4xx_spi *hw = spi_master_get_devdata(master); + + spi_bitbang_stop(&hw->bitbang); + dev_set_drvdata(&op->dev, NULL); + release_mem_region(hw->mapbase, hw->mapsize); + free_irq(hw->irqnum, hw); + iounmap(hw->regs); + free_gpios(hw); + return 0; +} + +static struct of_device_id spi_ppc4xx_of_match[] = { + { .compatible = "ibm,ppc4xx-spi", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match); + +static struct of_platform_driver spi_ppc4xx_of_driver = { + .match_table = spi_ppc4xx_of_match, + .probe = spi_ppc4xx_of_probe, + .remove = __exit_p(spi_ppc4xx_of_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init spi_ppc4xx_init(void) +{ + return of_register_platform_driver(&spi_ppc4xx_of_driver); +} +module_init(spi_ppc4xx_init); + +static void __exit spi_ppc4xx_exit(void) +{ + of_unregister_platform_driver(&spi_ppc4xx_of_driver); +} +module_exit(spi_ppc4xx_exit); + +MODULE_AUTHOR("Gary Jennejohn & Stefan Roese"); +MODULE_DESCRIPTION("Simple PPC4xx SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 3f3119d760db..33d94f76b9ef 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -20,17 +20,28 @@ #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/io.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <mach/hardware.h> - #include <plat/regs-spi.h> #include <mach/spi.h> +/** + * s3c24xx_spi_devstate - per device data + * @hz: Last frequency calculated for @sppre field. + * @mode: Last mode setting for the @spcon field. + * @spcon: Value to write to the SPCON register. + * @sppre: Value to write to the SPPRE register. + */ +struct s3c24xx_spi_devstate { + unsigned int hz; + unsigned int mode; + u8 spcon; + u8 sppre; +}; + struct s3c24xx_spi { /* bitbang has to be first */ struct spi_bitbang bitbang; @@ -71,43 +82,31 @@ static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol) static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) { + struct s3c24xx_spi_devstate *cs = spi->controller_state; struct s3c24xx_spi *hw = to_hw(spi); unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; - unsigned int spcon; + + /* change the chipselect state and the state of the spi engine clock */ switch (value) { case BITBANG_CS_INACTIVE: hw->set_cs(hw->pdata, spi->chip_select, cspol^1); + writeb(cs->spcon, hw->regs + S3C2410_SPCON); break; case BITBANG_CS_ACTIVE: - spcon = readb(hw->regs + S3C2410_SPCON); - - if (spi->mode & SPI_CPHA) - spcon |= S3C2410_SPCON_CPHA_FMTB; - else - spcon &= ~S3C2410_SPCON_CPHA_FMTB; - - if (spi->mode & SPI_CPOL) - spcon |= S3C2410_SPCON_CPOL_HIGH; - else - spcon &= ~S3C2410_SPCON_CPOL_HIGH; - - spcon |= S3C2410_SPCON_ENSCK; - - /* write new configration */ - - writeb(spcon, hw->regs + S3C2410_SPCON); + writeb(cs->spcon | S3C2410_SPCON_ENSCK, + hw->regs + S3C2410_SPCON); hw->set_cs(hw->pdata, spi->chip_select, cspol); - break; } } -static int s3c24xx_spi_setupxfer(struct spi_device *spi, - struct spi_transfer *t) +static int s3c24xx_spi_update_state(struct spi_device *spi, + struct spi_transfer *t) { struct s3c24xx_spi *hw = to_hw(spi); + struct s3c24xx_spi_devstate *cs = spi->controller_state; unsigned int bpw; unsigned int hz; unsigned int div; @@ -127,41 +126,89 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi, return -EINVAL; } - clk = clk_get_rate(hw->clk); - div = DIV_ROUND_UP(clk, hz * 2) - 1; + if (spi->mode != cs->mode) { + u8 spcon = SPCON_DEFAULT; - if (div > 255) - div = 255; + if (spi->mode & SPI_CPHA) + spcon |= S3C2410_SPCON_CPHA_FMTB; - dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n", - div, hz, clk / (2 * (div + 1))); + if (spi->mode & SPI_CPOL) + spcon |= S3C2410_SPCON_CPOL_HIGH; + cs->mode = spi->mode; + cs->spcon = spcon; + } - writeb(div, hw->regs + S3C2410_SPPRE); + if (cs->hz != hz) { + clk = clk_get_rate(hw->clk); + div = DIV_ROUND_UP(clk, hz * 2) - 1; - spin_lock(&hw->bitbang.lock); - if (!hw->bitbang.busy) { - hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); - /* need to ndelay for 0.5 clocktick ? */ + if (div > 255) + div = 255; + + dev_dbg(&spi->dev, "pre-scaler=%d (wanted %d, got %ld)\n", + div, hz, clk / (2 * (div + 1))); + + cs->hz = hz; + cs->sppre = div; } - spin_unlock(&hw->bitbang.lock); return 0; } +static int s3c24xx_spi_setupxfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct s3c24xx_spi_devstate *cs = spi->controller_state; + struct s3c24xx_spi *hw = to_hw(spi); + int ret; + + ret = s3c24xx_spi_update_state(spi, t); + if (!ret) + writeb(cs->sppre, hw->regs + S3C2410_SPPRE); + + return ret; +} + static int s3c24xx_spi_setup(struct spi_device *spi) { + struct s3c24xx_spi_devstate *cs = spi->controller_state; + struct s3c24xx_spi *hw = to_hw(spi); int ret; - ret = s3c24xx_spi_setupxfer(spi, NULL); - if (ret < 0) { - dev_err(&spi->dev, "setupxfer returned %d\n", ret); + /* allocate settings on the first call */ + if (!cs) { + cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL); + if (!cs) { + dev_err(&spi->dev, "no memory for controller state\n"); + return -ENOMEM; + } + + cs->spcon = SPCON_DEFAULT; + cs->hz = -1; + spi->controller_state = cs; + } + + /* initialise the state from the device */ + ret = s3c24xx_spi_update_state(spi, NULL); + if (ret) return ret; + + spin_lock(&hw->bitbang.lock); + if (!hw->bitbang.busy) { + hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); + /* need to ndelay for 0.5 clocktick ? */ } + spin_unlock(&hw->bitbang.lock); return 0; } +static void s3c24xx_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) { return hw->tx ? hw->tx[count] : 0; @@ -289,7 +336,9 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer; hw->bitbang.chipselect = s3c24xx_spi_chipsel; hw->bitbang.txrx_bufs = s3c24xx_spi_txrx; - hw->bitbang.master->setup = s3c24xx_spi_setup; + + hw->master->setup = s3c24xx_spi_setup; + hw->master->cleanup = s3c24xx_spi_cleanup; dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang); @@ -302,7 +351,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) goto err_no_iores; } - hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1, + hw->ioarea = request_mem_region(res->start, resource_size(res), pdev->name); if (hw->ioarea == NULL) { @@ -311,7 +360,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) goto err_no_iores; } - hw->regs = ioremap(res->start, (res->end - res->start)+1); + hw->regs = ioremap(res->start, resource_size(res)); if (hw->regs == NULL) { dev_err(&pdev->dev, "Cannot map IO\n"); err = -ENXIO; @@ -388,7 +437,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) err_no_iores: err_no_pdata: - spi_master_put(hw->master);; + spi_master_put(hw->master); err_nomem: return err; @@ -421,9 +470,9 @@ static int __exit s3c24xx_spi_remove(struct platform_device *dev) #ifdef CONFIG_PM -static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg) +static int s3c24xx_spi_suspend(struct device *dev) { - struct s3c24xx_spi *hw = platform_get_drvdata(pdev); + struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev)); if (hw->pdata && hw->pdata->gpio_setup) hw->pdata->gpio_setup(hw->pdata, 0); @@ -432,27 +481,31 @@ static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg) return 0; } -static int s3c24xx_spi_resume(struct platform_device *pdev) +static int s3c24xx_spi_resume(struct device *dev) { - struct s3c24xx_spi *hw = platform_get_drvdata(pdev); + struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev)); s3c24xx_spi_initialsetup(hw); return 0; } +static struct dev_pm_ops s3c24xx_spi_pmops = { + .suspend = s3c24xx_spi_suspend, + .resume = s3c24xx_spi_resume, +}; + +#define S3C24XX_SPI_PMOPS &s3c24xx_spi_pmops #else -#define s3c24xx_spi_suspend NULL -#define s3c24xx_spi_resume NULL -#endif +#define S3C24XX_SPI_PMOPS NULL +#endif /* CONFIG_PM */ MODULE_ALIAS("platform:s3c2410-spi"); static struct platform_driver s3c24xx_spi_driver = { .remove = __exit_p(s3c24xx_spi_remove), - .suspend = s3c24xx_spi_suspend, - .resume = s3c24xx_spi_resume, .driver = { .name = "s3c2410-spi", .owner = THIS_MODULE, + .pm = S3C24XX_SPI_PMOPS, }, }; diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c new file mode 100644 index 000000000000..d871dc23909c --- /dev/null +++ b/drivers/spi/spi_stmp.c @@ -0,0 +1,679 @@ +/* + * Freescale STMP378X SPI master driver + * + * Author: dmitry pervushin <dimka@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> + +#include <mach/platform.h> +#include <mach/stmp3xxx.h> +#include <mach/dma.h> +#include <mach/regs-ssp.h> +#include <mach/regs-apbh.h> + + +/* 0 means DMA mode(recommended, default), !0 - PIO mode */ +static int pio; +static int clock; + +/* default timeout for busy waits is 2 seconds */ +#define STMP_SPI_TIMEOUT (2 * HZ) + +struct stmp_spi { + int id; + + void * __iomem regs; /* vaddr of the control registers */ + + int irq, err_irq; + u32 dma; + struct stmp3xxx_dma_descriptor d; + + u32 speed_khz; + u32 saved_timings; + u32 divider; + + struct clk *clk; + struct device *master_dev; + + struct work_struct work; + struct workqueue_struct *workqueue; + + /* lock protects queue access */ + spinlock_t lock; + struct list_head queue; + + struct completion done; +}; + +#define busy_wait(cond) \ + ({ \ + unsigned long end_jiffies = jiffies + STMP_SPI_TIMEOUT; \ + bool succeeded = false; \ + do { \ + if (cond) { \ + succeeded = true; \ + break; \ + } \ + cpu_relax(); \ + } while (time_before(end_jiffies, jiffies)); \ + succeeded; \ + }) + +/** + * stmp_spi_init_hw + * Initialize the SSP port + */ +static int stmp_spi_init_hw(struct stmp_spi *ss) +{ + int err = 0; + void *pins = ss->master_dev->platform_data; + + err = stmp3xxx_request_pin_group(pins, dev_name(ss->master_dev)); + if (err) + goto out; + + ss->clk = clk_get(NULL, "ssp"); + if (IS_ERR(ss->clk)) { + err = PTR_ERR(ss->clk); + goto out_free_pins; + } + clk_enable(ss->clk); + + stmp3xxx_reset_block(ss->regs, false); + stmp3xxx_dma_reset_channel(ss->dma); + + return 0; + +out_free_pins: + stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); +out: + return err; +} + +static void stmp_spi_release_hw(struct stmp_spi *ss) +{ + void *pins = ss->master_dev->platform_data; + + if (ss->clk && !IS_ERR(ss->clk)) { + clk_disable(ss->clk); + clk_put(ss->clk); + } + stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); +} + +static int stmp_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + u8 bits_per_word; + u32 hz; + struct stmp_spi *ss = spi_master_get_devdata(spi->master); + u16 rate; + + bits_per_word = spi->bits_per_word; + if (t && t->bits_per_word) + bits_per_word = t->bits_per_word; + + /* + * Calculate speed: + * - by default, use maximum speed from ssp clk + * - if device overrides it, use it + * - if transfer specifies other speed, use transfer's one + */ + hz = 1000 * ss->speed_khz / ss->divider; + if (spi->max_speed_hz) + hz = min(hz, spi->max_speed_hz); + if (t && t->speed_hz) + hz = min(hz, t->speed_hz); + + if (hz == 0) { + dev_err(&spi->dev, "Cannot continue with zero clock\n"); + return -EINVAL; + } + + if (bits_per_word != 8) { + dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", + __func__, bits_per_word); + return -EINVAL; + } + + dev_dbg(&spi->dev, "Requested clk rate = %uHz, max = %uHz/%d = %uHz\n", + hz, ss->speed_khz, ss->divider, + ss->speed_khz * 1000 / ss->divider); + + if (ss->speed_khz * 1000 / ss->divider < hz) { + dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n", + __func__, hz); + return -EINVAL; + } + + rate = 1000 * ss->speed_khz/ss->divider/hz; + + writel(BF(ss->divider, SSP_TIMING_CLOCK_DIVIDE) | + BF(rate - 1, SSP_TIMING_CLOCK_RATE), + HW_SSP_TIMING + ss->regs); + + writel(BF(1 /* mode SPI */, SSP_CTRL1_SSP_MODE) | + BF(4 /* 8 bits */, SSP_CTRL1_WORD_LENGTH) | + ((spi->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) | + ((spi->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0) | + (pio ? 0 : BM_SSP_CTRL1_DMA_ENABLE), + ss->regs + HW_SSP_CTRL1); + + return 0; +} + +static int stmp_spi_setup(struct spi_device *spi) +{ + /* spi_setup() does basic checks, + * stmp_spi_setup_transfer() does more later + */ + if (spi->bits_per_word != 8) { + dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", + __func__, spi->bits_per_word); + return -EINVAL; + } + return 0; +} + +static inline u32 stmp_spi_cs(unsigned cs) +{ + return ((cs & 1) ? BM_SSP_CTRL0_WAIT_FOR_CMD : 0) | + ((cs & 2) ? BM_SSP_CTRL0_WAIT_FOR_IRQ : 0); +} + +static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, + unsigned char *buf, dma_addr_t dma_buf, int len, + int first, int last, bool write) +{ + u32 c0 = 0; + dma_addr_t spi_buf_dma = dma_buf; + int status = 0; + enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + + c0 |= (first ? BM_SSP_CTRL0_LOCK_CS : 0); + c0 |= (last ? BM_SSP_CTRL0_IGNORE_CRC : 0); + c0 |= (write ? 0 : BM_SSP_CTRL0_READ); + c0 |= BM_SSP_CTRL0_DATA_XFER; + + c0 |= stmp_spi_cs(cs); + + c0 |= BF(len, SSP_CTRL0_XFER_COUNT); + + if (!dma_buf) + spi_buf_dma = dma_map_single(ss->master_dev, buf, len, dir); + + ss->d.command->cmd = + BF(len, APBH_CHn_CMD_XFER_COUNT) | + BF(1, APBH_CHn_CMD_CMDWORDS) | + BM_APBH_CHn_CMD_WAIT4ENDCMD | + BM_APBH_CHn_CMD_IRQONCMPLT | + BF(write ? BV_APBH_CHn_CMD_COMMAND__DMA_READ : + BV_APBH_CHn_CMD_COMMAND__DMA_WRITE, + APBH_CHn_CMD_COMMAND); + ss->d.command->pio_words[0] = c0; + ss->d.command->buf_ptr = spi_buf_dma; + + stmp3xxx_dma_reset_channel(ss->dma); + stmp3xxx_dma_clear_interrupt(ss->dma); + stmp3xxx_dma_enable_interrupt(ss->dma); + init_completion(&ss->done); + stmp3xxx_dma_go(ss->dma, &ss->d, 1); + wait_for_completion(&ss->done); + + if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) + status = ETIMEDOUT; + + if (!dma_buf) + dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); + + return status; +} + +static inline void stmp_spi_enable(struct stmp_spi *ss) +{ + stmp3xxx_setl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); + stmp3xxx_clearl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); +} + +static inline void stmp_spi_disable(struct stmp_spi *ss) +{ + stmp3xxx_clearl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); + stmp3xxx_setl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); +} + +static int stmp_spi_txrx_pio(struct stmp_spi *ss, int cs, + unsigned char *buf, int len, + bool first, bool last, bool write) +{ + if (first) + stmp_spi_enable(ss); + + stmp3xxx_setl(stmp_spi_cs(cs), ss->regs + HW_SSP_CTRL0); + + while (len--) { + if (last && len <= 0) + stmp_spi_disable(ss); + + stmp3xxx_clearl(BM_SSP_CTRL0_XFER_COUNT, + ss->regs + HW_SSP_CTRL0); + stmp3xxx_setl(1, ss->regs + HW_SSP_CTRL0); + + if (write) + stmp3xxx_clearl(BM_SSP_CTRL0_READ, + ss->regs + HW_SSP_CTRL0); + else + stmp3xxx_setl(BM_SSP_CTRL0_READ, + ss->regs + HW_SSP_CTRL0); + + /* Run! */ + stmp3xxx_setl(BM_SSP_CTRL0_RUN, ss->regs + HW_SSP_CTRL0); + + if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & + BM_SSP_CTRL0_RUN)) + break; + + if (write) + writel(*buf, ss->regs + HW_SSP_DATA); + + /* Set TRANSFER */ + stmp3xxx_setl(BM_SSP_CTRL0_DATA_XFER, ss->regs + HW_SSP_CTRL0); + + if (!write) { + if (busy_wait((readl(ss->regs + HW_SSP_STATUS) & + BM_SSP_STATUS_FIFO_EMPTY))) + break; + *buf = readl(ss->regs + HW_SSP_DATA) & 0xFF; + } + + if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & + BM_SSP_CTRL0_RUN)) + break; + + /* advance to the next byte */ + buf++; + } + + return len < 0 ? 0 : -ETIMEDOUT; +} + +static int stmp_spi_handle_message(struct stmp_spi *ss, struct spi_message *m) +{ + bool first, last; + struct spi_transfer *t, *tmp_t; + int status = 0; + int cs; + + cs = m->spi->chip_select; + + list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) { + + first = (&t->transfer_list == m->transfers.next); + last = (&t->transfer_list == m->transfers.prev); + + if (first || t->speed_hz || t->bits_per_word) + stmp_spi_setup_transfer(m->spi, t); + + /* reject "not last" transfers which request to change cs */ + if (t->cs_change && !last) { + dev_err(&m->spi->dev, + "Message with t->cs_change has been skipped\n"); + continue; + } + + if (t->tx_buf) { + status = pio ? + stmp_spi_txrx_pio(ss, cs, (void *)t->tx_buf, + t->len, first, last, true) : + stmp_spi_txrx_dma(ss, cs, (void *)t->tx_buf, + t->tx_dma, t->len, first, last, true); +#ifdef DEBUG + if (t->len < 0x10) + print_hex_dump_bytes("Tx ", + DUMP_PREFIX_OFFSET, + t->tx_buf, t->len); + else + pr_debug("Tx: %d bytes\n", t->len); +#endif + } + if (t->rx_buf) { + status = pio ? + stmp_spi_txrx_pio(ss, cs, t->rx_buf, + t->len, first, last, false) : + stmp_spi_txrx_dma(ss, cs, t->rx_buf, + t->rx_dma, t->len, first, last, false); +#ifdef DEBUG + if (t->len < 0x10) + print_hex_dump_bytes("Rx ", + DUMP_PREFIX_OFFSET, + t->rx_buf, t->len); + else + pr_debug("Rx: %d bytes\n", t->len); +#endif + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (status) + break; + + } + return status; +} + +/** + * stmp_spi_handle - handle messages from the queue + */ +static void stmp_spi_handle(struct work_struct *w) +{ + struct stmp_spi *ss = container_of(w, struct stmp_spi, work); + unsigned long flags; + struct spi_message *m; + + spin_lock_irqsave(&ss->lock, flags); + while (!list_empty(&ss->queue)) { + m = list_entry(ss->queue.next, struct spi_message, queue); + list_del_init(&m->queue); + spin_unlock_irqrestore(&ss->lock, flags); + + m->status = stmp_spi_handle_message(ss, m); + m->complete(m->context); + + spin_lock_irqsave(&ss->lock, flags); + } + spin_unlock_irqrestore(&ss->lock, flags); + + return; +} + +/** + * stmp_spi_transfer - perform message transfer. + * Called indirectly from spi_async, queues all the messages to + * spi_handle_message. + * @spi: spi device + * @m: message to be queued + */ +static int stmp_spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct stmp_spi *ss = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->status = -EINPROGRESS; + spin_lock_irqsave(&ss->lock, flags); + list_add_tail(&m->queue, &ss->queue); + queue_work(ss->workqueue, &ss->work); + spin_unlock_irqrestore(&ss->lock, flags); + return 0; +} + +static irqreturn_t stmp_spi_irq(int irq, void *dev_id) +{ + struct stmp_spi *ss = dev_id; + + stmp3xxx_dma_clear_interrupt(ss->dma); + complete(&ss->done); + return IRQ_HANDLED; +} + +static irqreturn_t stmp_spi_irq_err(int irq, void *dev_id) +{ + struct stmp_spi *ss = dev_id; + u32 c1, st; + + c1 = readl(ss->regs + HW_SSP_CTRL1); + st = readl(ss->regs + HW_SSP_STATUS); + dev_err(ss->master_dev, "%s: status = 0x%08X, c1 = 0x%08X\n", + __func__, st, c1); + stmp3xxx_clearl(c1 & 0xCCCC0000, ss->regs + HW_SSP_CTRL1); + + return IRQ_HANDLED; +} + +static int __devinit stmp_spi_probe(struct platform_device *dev) +{ + int err = 0; + struct spi_master *master; + struct stmp_spi *ss; + struct resource *r; + + master = spi_alloc_master(&dev->dev, sizeof(struct stmp_spi)); + if (master == NULL) { + err = -ENOMEM; + goto out0; + } + master->flags = SPI_MASTER_HALF_DUPLEX; + + ss = spi_master_get_devdata(master); + platform_set_drvdata(dev, master); + + /* Get resources(memory, IRQ) associated with the device */ + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (r == NULL) { + err = -ENODEV; + goto out_put_master; + } + ss->regs = ioremap(r->start, resource_size(r)); + if (!ss->regs) { + err = -EINVAL; + goto out_put_master; + } + + ss->master_dev = &dev->dev; + ss->id = dev->id; + + INIT_WORK(&ss->work, stmp_spi_handle); + INIT_LIST_HEAD(&ss->queue); + spin_lock_init(&ss->lock); + + ss->workqueue = create_singlethread_workqueue(dev_name(&dev->dev)); + if (!ss->workqueue) { + err = -ENXIO; + goto out_put_master; + } + master->transfer = stmp_spi_transfer; + master->setup = stmp_spi_setup; + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA; + + ss->irq = platform_get_irq(dev, 0); + if (ss->irq < 0) { + err = ss->irq; + goto out_put_master; + } + ss->err_irq = platform_get_irq(dev, 1); + if (ss->err_irq < 0) { + err = ss->err_irq; + goto out_put_master; + } + + r = platform_get_resource(dev, IORESOURCE_DMA, 0); + if (r == NULL) { + err = -ENODEV; + goto out_put_master; + } + + ss->dma = r->start; + err = stmp3xxx_dma_request(ss->dma, &dev->dev, dev_name(&dev->dev)); + if (err) + goto out_put_master; + + err = stmp3xxx_dma_allocate_command(ss->dma, &ss->d); + if (err) + goto out_free_dma; + + master->bus_num = dev->id; + master->num_chipselect = 1; + + /* SPI controller initializations */ + err = stmp_spi_init_hw(ss); + if (err) { + dev_dbg(&dev->dev, "cannot initialize hardware\n"); + goto out_free_dma_desc; + } + + if (clock) { + dev_info(&dev->dev, "clock rate forced to %d\n", clock); + clk_set_rate(ss->clk, clock); + } + ss->speed_khz = clk_get_rate(ss->clk); + ss->divider = 2; + dev_info(&dev->dev, "max possible speed %d = %ld/%d kHz\n", + ss->speed_khz, clk_get_rate(ss->clk), ss->divider); + + /* Register for SPI interrupt */ + err = request_irq(ss->irq, stmp_spi_irq, 0, + dev_name(&dev->dev), ss); + if (err) { + dev_dbg(&dev->dev, "request_irq failed, %d\n", err); + goto out_release_hw; + } + + /* ..and shared interrupt for all SSP controllers */ + err = request_irq(ss->err_irq, stmp_spi_irq_err, IRQF_SHARED, + dev_name(&dev->dev), ss); + if (err) { + dev_dbg(&dev->dev, "request_irq(error) failed, %d\n", err); + goto out_free_irq; + } + + err = spi_register_master(master); + if (err) { + dev_dbg(&dev->dev, "cannot register spi master, %d\n", err); + goto out_free_irq_2; + } + dev_info(&dev->dev, "at (mapped) 0x%08X, irq=%d, bus %d, %s mode\n", + (u32)ss->regs, ss->irq, master->bus_num, + pio ? "PIO" : "DMA"); + return 0; + +out_free_irq_2: + free_irq(ss->err_irq, ss); +out_free_irq: + free_irq(ss->irq, ss); +out_free_dma_desc: + stmp3xxx_dma_free_command(ss->dma, &ss->d); +out_free_dma: + stmp3xxx_dma_release(ss->dma); +out_release_hw: + stmp_spi_release_hw(ss); +out_put_master: + if (ss->workqueue) + destroy_workqueue(ss->workqueue); + if (ss->regs) + iounmap(ss->regs); + platform_set_drvdata(dev, NULL); + spi_master_put(master); +out0: + return err; +} + +static int __devexit stmp_spi_remove(struct platform_device *dev) +{ + struct stmp_spi *ss; + struct spi_master *master; + + master = platform_get_drvdata(dev); + if (master == NULL) + goto out0; + ss = spi_master_get_devdata(master); + + spi_unregister_master(master); + + free_irq(ss->err_irq, ss); + free_irq(ss->irq, ss); + stmp3xxx_dma_free_command(ss->dma, &ss->d); + stmp3xxx_dma_release(ss->dma); + stmp_spi_release_hw(ss); + destroy_workqueue(ss->workqueue); + iounmap(ss->regs); + spi_master_put(master); + platform_set_drvdata(dev, NULL); +out0: + return 0; +} + +#ifdef CONFIG_PM +static int stmp_spi_suspend(struct platform_device *pdev, pm_message_t pmsg) +{ + struct stmp_spi *ss; + struct spi_master *master; + + master = platform_get_drvdata(pdev); + ss = spi_master_get_devdata(master); + + ss->saved_timings = readl(HW_SSP_TIMING + ss->regs); + clk_disable(ss->clk); + + return 0; +} + +static int stmp_spi_resume(struct platform_device *pdev) +{ + struct stmp_spi *ss; + struct spi_master *master; + + master = platform_get_drvdata(pdev); + ss = spi_master_get_devdata(master); + + clk_enable(ss->clk); + stmp3xxx_reset_block(ss->regs, false); + writel(ss->saved_timings, ss->regs + HW_SSP_TIMING); + + return 0; +} + +#else +#define stmp_spi_suspend NULL +#define stmp_spi_resume NULL +#endif + +static struct platform_driver stmp_spi_driver = { + .probe = stmp_spi_probe, + .remove = __devexit_p(stmp_spi_remove), + .driver = { + .name = "stmp3xxx_ssp", + .owner = THIS_MODULE, + }, + .suspend = stmp_spi_suspend, + .resume = stmp_spi_resume, +}; + +static int __init stmp_spi_init(void) +{ + return platform_driver_register(&stmp_spi_driver); +} + +static void __exit stmp_spi_exit(void) +{ + platform_driver_unregister(&stmp_spi_driver); +} + +module_init(stmp_spi_init); +module_exit(stmp_spi_exit); +module_param(pio, int, S_IRUGO); +module_param(clock, int, S_IRUGO); +MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com>"); +MODULE_DESCRIPTION("STMP3xxx SPI/SSP driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 606e7a40a8da..f921bd1109e1 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -688,3 +688,4 @@ module_exit(spidev_exit); MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>"); MODULE_DESCRIPTION("User mode SPI device interface"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:spidev"); diff --git a/drivers/spi/tle62x0.c b/drivers/spi/tle62x0.c index 455991fbe28f..bf9540f5fb98 100644 --- a/drivers/spi/tle62x0.c +++ b/drivers/spi/tle62x0.c @@ -329,3 +329,4 @@ module_exit(tle62x0_exit); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_DESCRIPTION("TLE62x0 SPI driver"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:tle62x0"); |