diff options
Diffstat (limited to 'drivers/soc/imx/imx8m-blk-ctrl.c')
-rw-r--r-- | drivers/soc/imx/imx8m-blk-ctrl.c | 96 |
1 files changed, 95 insertions, 1 deletions
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c index 519b3651d1d9..511e74f0db8a 100644 --- a/drivers/soc/imx/imx8m-blk-ctrl.c +++ b/drivers/soc/imx/imx8m-blk-ctrl.c @@ -14,9 +14,11 @@ #include <linux/clk.h> #include <dt-bindings/power/imx8mm-power.h> +#include <dt-bindings/power/imx8mn-power.h> #define BLK_SFT_RSTN 0x0 #define BLK_CLK_EN 0x4 +#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */ struct imx8m_blk_ctrl_domain; @@ -36,6 +38,15 @@ struct imx8m_blk_ctrl_domain_data { const char *gpc_name; u32 rst_mask; u32 clk_mask; + + /* + * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register + * which is used to control the reset for the MIPI Phy. + * Since it's only present in certain circumstances, + * an if-statement should be used before setting and clearing this + * register. + */ + u32 mipi_phy_rst_mask; }; #define DOMAIN_MAX_CLKS 3 @@ -78,6 +89,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd) /* put devices into reset */ regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask); + if (data->mipi_phy_rst_mask) + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask); /* enable upstream and blk-ctrl clocks to allow reset to propagate */ ret = clk_bulk_prepare_enable(data->num_clks, domain->clks); @@ -99,6 +112,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd) /* release reset */ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask); + if (data->mipi_phy_rst_mask) + regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask); /* disable upstream clocks */ clk_bulk_disable_unprepare(data->num_clks, domain->clks); @@ -120,6 +135,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd) struct imx8m_blk_ctrl *bc = domain->bc; /* put devices into reset and disable clocks */ + if (data->mipi_phy_rst_mask) + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask); + regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask); regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask); @@ -480,6 +498,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[] .gpc_name = "mipi-dsi", .rst_mask = BIT(5), .clk_mask = BIT(8) | BIT(9), + .mipi_phy_rst_mask = BIT(17), }, [IMX8MM_DISPBLK_PD_MIPI_CSI] = { .name = "dispblk-mipi-csi", @@ -488,6 +507,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[] .gpc_name = "mipi-csi", .rst_mask = BIT(3) | BIT(4), .clk_mask = BIT(10) | BIT(11), + .mipi_phy_rst_mask = BIT(16), }, }; @@ -498,6 +518,77 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = { .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data), }; + +static int imx8mn_disp_power_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl, + power_nb); + + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF) + return NOTIFY_OK; + + /* Enable bus clock and deassert bus reset */ + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8)); + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8)); + + /* + * On power up we have no software backchannel to the GPC to + * wait for the ADB handshake to happen, so we just delay for a + * bit. On power down the GPC driver waits for the handshake. + */ + if (action == GENPD_NOTIFY_ON) + udelay(5); + + + return NOTIFY_OK; +} + +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = { + [IMX8MN_DISPBLK_PD_MIPI_DSI] = { + .name = "dispblk-mipi-dsi", + .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", }, + .num_clks = 2, + .gpc_name = "mipi-dsi", + .rst_mask = BIT(0) | BIT(1), + .clk_mask = BIT(0) | BIT(1), + .mipi_phy_rst_mask = BIT(17), + }, + [IMX8MN_DISPBLK_PD_MIPI_CSI] = { + .name = "dispblk-mipi-csi", + .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" }, + .num_clks = 2, + .gpc_name = "mipi-csi", + .rst_mask = BIT(2) | BIT(3), + .clk_mask = BIT(2) | BIT(3), + .mipi_phy_rst_mask = BIT(16), + }, + [IMX8MN_DISPBLK_PD_LCDIF] = { + .name = "dispblk-lcdif", + .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", }, + .num_clks = 3, + .gpc_name = "lcdif", + .rst_mask = BIT(4) | BIT(5), + .clk_mask = BIT(4) | BIT(5), + }, + [IMX8MN_DISPBLK_PD_ISI] = { + .name = "dispblk-isi", + .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root", + "disp_apb_root"}, + .num_clks = 4, + .gpc_name = "isi", + .rst_mask = BIT(6) | BIT(7), + .clk_mask = BIT(6) | BIT(7), + }, +}; + +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = { + .max_reg = 0x84, + .power_notifier_fn = imx8mn_disp_power_notifier, + .domains = imx8mn_disp_blk_ctl_domain_data, + .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data), +}; + static const struct of_device_id imx8m_blk_ctrl_of_match[] = { { .compatible = "fsl,imx8mm-vpu-blk-ctrl", @@ -505,7 +596,10 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = { }, { .compatible = "fsl,imx8mm-disp-blk-ctrl", .data = &imx8mm_disp_blk_ctl_dev_data - } ,{ + }, { + .compatible = "fsl,imx8mn-disp-blk-ctrl", + .data = &imx8mn_disp_blk_ctl_dev_data + }, { /* Sentinel */ } }; |