summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/68360serial.c51
-rw-r--r--drivers/serial/8250.c69
-rw-r--r--drivers/serial/Kconfig14
-rw-r--r--drivers/serial/altera_uart.c156
-rw-r--r--drivers/serial/bfin_sport_uart.c7
-rw-r--r--drivers/serial/imx.c5
-rw-r--r--drivers/serial/ioc3_serial.c5
-rw-r--r--drivers/serial/jsm/jsm_driver.c4
-rw-r--r--drivers/serial/kgdboc.c2
-rw-r--r--drivers/serial/max3107.c34
-rw-r--r--drivers/serial/mfd.c50
-rw-r--r--drivers/serial/mrst_max3110.c359
-rw-r--r--drivers/serial/mrst_max3110.h1
-rw-r--r--drivers/serial/samsung.c2
-rw-r--r--drivers/serial/serial_core.c49
-rw-r--r--drivers/serial/serial_cs.c205
-rw-r--r--drivers/serial/uartlite.c26
17 files changed, 607 insertions, 432 deletions
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 0dff3bbddc8b..88b13356ec10 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration)
}
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int rs_360_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ struct async_icount cnow;
+
+ local_irq_disable();
+ cnow = info->state->icount;
+ local_irq_enable();
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+
+ return 0;
+}
+
static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
@@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
return -ENODEV;
- if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (cmd != TIOCMIWAIT) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
return 0;
#endif
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- local_irq_disable();
- cnow = info->state->icount;
- local_irq_enable();
- p_cuser = (struct serial_icounter_struct *) arg;
-/* error = put_user(cnow.cts, &p_cuser->cts); */
-/* if (error) return error; */
-/* error = put_user(cnow.dsr, &p_cuser->dsr); */
-/* if (error) return error; */
-/* error = put_user(cnow.rng, &p_cuser->rng); */
-/* if (error) return error; */
-/* error = put_user(cnow.dcd, &p_cuser->dcd); */
-/* if (error) return error; */
-
- put_user(cnow.cts, &p_cuser->cts);
- put_user(cnow.dsr, &p_cuser->dsr);
- put_user(cnow.rng, &p_cuser->rng);
- put_user(cnow.dcd, &p_cuser->dcd);
- return 0;
default:
return -ENOIOCTLCMD;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 24110f6f61e0..167c4a6ccbc3 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -31,6 +31,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
+#include <linux/ratelimit.h>
#include <linux/tty_flip.h>
#include <linux/serial_reg.h>
#include <linux/serial_core.h>
@@ -154,12 +155,6 @@ struct uart_8250_port {
unsigned char lsr_saved_flags;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
-
- /*
- * We provide a per-port pm hook.
- */
- void (*pm)(struct uart_port *port,
- unsigned int state, unsigned int old);
};
struct irq_info {
@@ -1606,8 +1601,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
if (l == i->head && pass_counter++ > PASS_LIMIT) {
/* If we hit this, we're dead. */
- printk(KERN_ERR "serial8250: too much work for "
- "irq%d\n", irq);
+ printk_ratelimited(KERN_ERR
+ "serial8250: too much work for irq%d\n", irq);
break;
}
} while (l != end);
@@ -1722,12 +1717,6 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up)
mutex_unlock(&hash_mutex);
}
-/* Base timer interval for polling */
-static inline int poll_timeout(int timeout)
-{
- return timeout > 6 ? (timeout / 2 - 2) : 1;
-}
-
/*
* This function is used to handle ports that do not have an
* interrupt. This doesn't work very well for 16450's, but gives
@@ -1742,7 +1731,7 @@ static void serial8250_timeout(unsigned long data)
iir = serial_in(up, UART_IIR);
if (!(iir & UART_IIR_NO_INT))
serial8250_handle_port(up);
- mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
}
static void serial8250_backup_timeout(unsigned long data)
@@ -1787,7 +1776,7 @@ static void serial8250_backup_timeout(unsigned long data)
/* Standard timer interval plus 0.2s to keep the port running */
mod_timer(&up->timer,
- jiffies + poll_timeout(up->port.timeout) + HZ / 5);
+ jiffies + uart_poll_timeout(&up->port) + HZ / 5);
}
static unsigned int serial8250_tx_empty(struct uart_port *port)
@@ -1867,15 +1856,17 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
unsigned int status, tmout = 10000;
/* Wait up to 10ms for the character(s) to be sent. */
- do {
+ for (;;) {
status = serial_in(up, UART_LSR);
up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
+ if ((status & bits) == bits)
+ break;
if (--tmout == 0)
break;
udelay(1);
- } while ((status & bits) != bits);
+ }
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
@@ -2069,7 +2060,7 @@ static int serial8250_startup(struct uart_port *port)
up->timer.function = serial8250_backup_timeout;
up->timer.data = (unsigned long)up;
mod_timer(&up->timer, jiffies +
- poll_timeout(up->port.timeout) + HZ / 5);
+ uart_poll_timeout(port) + HZ / 5);
}
/*
@@ -2079,7 +2070,7 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!is_real_interrupt(up->port.irq)) {
up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
} else {
retval = serial_link_irq_chain(up);
if (retval)
@@ -2440,16 +2431,24 @@ serial8250_set_ldisc(struct uart_port *port, int new)
port->flags &= ~UPF_HARDPPS_CD;
}
-static void
-serial8250_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
+
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
{
struct uart_8250_port *p = (struct uart_8250_port *)port;
serial8250_set_sleep(p, state != 0);
+}
+EXPORT_SYMBOL(serial8250_do_pm);
- if (p->pm)
- p->pm(port, state, oldstate);
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ if (port->pm)
+ port->pm(port, state, oldstate);
+ else
+ serial8250_do_pm(port, state, oldstate);
}
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
@@ -2674,6 +2673,16 @@ static struct uart_ops serial8250_pops = {
static struct uart_8250_port serial8250_ports[UART_NR];
+static void (*serial8250_isa_config)(int port, struct uart_port *up,
+ unsigned short *capabilities);
+
+void serial8250_set_isa_configurator(
+ void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
+{
+ serial8250_isa_config = v;
+}
+EXPORT_SYMBOL(serial8250_set_isa_configurator);
+
static void __init serial8250_isa_init_ports(void)
{
struct uart_8250_port *up;
@@ -2719,6 +2728,9 @@ static void __init serial8250_isa_init_ports(void)
up->port.regshift = old_serial_port[i].iomem_reg_shift;
set_io_from_upio(&up->port);
up->port.irqflags |= irqflag;
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(i, &up->port, &up->capabilities);
+
}
}
@@ -3010,6 +3022,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
port.set_termios = p->set_termios;
+ port.pm = p->pm;
port.dev = &dev->dev;
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
@@ -3176,6 +3189,12 @@ int serial8250_register_port(struct uart_port *port)
/* Possibly override set_termios call */
if (port->set_termios)
uart->port.set_termios = port->set_termios;
+ if (port->pm)
+ uart->port.pm = port->pm;
+
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 12900f7083b0..927816484397 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS
int
depends on ARM && PLAT_SAMSUNG
default 2 if ARCH_S3C2400
+ default 6 if ARCH_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4
default 3
help
@@ -526,12 +527,12 @@ config SERIAL_S3C24A0
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
+ tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
select SERIAL_SAMSUNG_UARTS_4
default y
help
- Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+ Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
and S5PC100 SoCs
config SERIAL_S5PV210
@@ -717,13 +718,6 @@ config SERIAL_MRST_MAX3110
the Intel Moorestown platform. On other systems use the max3100
driver.
-config MRST_MAX3110_IRQ
- boolean "Enable GPIO IRQ for Max3110 over Moorestown"
- default n
- depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
- help
- This has to be enabled after Moorestown GPIO driver is loaded
-
config SERIAL_MFD_HSU
tristate "Medfield High Speed UART support"
depends on PCI
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index f8d8a00554da..721216292a50 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/console.h>
@@ -27,6 +28,8 @@
#include <linux/altera_uart.h>
#define DRV_NAME "altera_uart"
+#define SERIAL_ALTERA_MAJOR 204
+#define SERIAL_ALTERA_MINOR 213
/*
* Altera UART register definitions according to the Nios UART datasheet:
@@ -76,13 +79,28 @@
*/
struct altera_uart {
struct uart_port port;
+ struct timer_list tmr;
unsigned int sigs; /* Local copy of line sigs */
unsigned short imr; /* Local IMR mirror */
};
+static u32 altera_uart_readl(struct uart_port *port, int reg)
+{
+ struct altera_uart_platform_uart *platp = port->private_data;
+
+ return readl(port->membase + (reg << platp->bus_shift));
+}
+
+static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
+{
+ struct altera_uart_platform_uart *platp = port->private_data;
+
+ writel(dat, port->membase + (reg << platp->bus_shift));
+}
+
static unsigned int altera_uart_tx_empty(struct uart_port *port)
{
- return (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
}
@@ -91,8 +109,7 @@ static unsigned int altera_uart_get_mctrl(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
unsigned int sigs;
- sigs =
- (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
sigs |= (pp->sigs & TIOCM_RTS);
@@ -108,7 +125,7 @@ static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
else
pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_start_tx(struct uart_port *port)
@@ -116,7 +133,7 @@ static void altera_uart_start_tx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_stop_tx(struct uart_port *port)
@@ -124,7 +141,7 @@ static void altera_uart_stop_tx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_stop_rx(struct uart_port *port)
@@ -132,7 +149,7 @@ static void altera_uart_stop_rx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@@ -145,7 +162,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state)
pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
else
pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -168,7 +185,8 @@ static void altera_uart_set_termios(struct uart_port *port,
tty_termios_encode_baud_rate(termios, baud, baud);
spin_lock_irqsave(&port->lock, flags);
- writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+ uart_update_timeout(port, termios->c_cflag, baud);
+ altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -178,14 +196,15 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
unsigned char ch, flag;
unsigned short status;
- while ((status = readl(port->membase + ALTERA_UART_STATUS_REG)) &
+ while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
ALTERA_UART_STATUS_RRDY_MSK) {
- ch = readl(port->membase + ALTERA_UART_RXDATA_REG);
+ ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
flag = TTY_NORMAL;
port->icount.rx++;
if (status & ALTERA_UART_STATUS_E_MSK) {
- writel(status, port->membase + ALTERA_UART_STATUS_REG);
+ altera_uart_writel(port, status,
+ ALTERA_UART_STATUS_REG);
if (status & ALTERA_UART_STATUS_BRK_MSK) {
port->icount.brk++;
@@ -225,18 +244,18 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
if (port->x_char) {
/* Send special char - probably flow control */
- writel(port->x_char, port->membase + ALTERA_UART_TXDATA_REG);
+ altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
port->x_char = 0;
port->icount.tx++;
return;
}
- while (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TRDY_MSK) {
if (xmit->head == xmit->tail)
break;
- writel(xmit->buf[xmit->tail],
- port->membase + ALTERA_UART_TXDATA_REG);
+ altera_uart_writel(port, xmit->buf[xmit->tail],
+ ALTERA_UART_TXDATA_REG);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
}
@@ -246,7 +265,7 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
if (xmit->head == xmit->tail) {
pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
- writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
}
@@ -256,7 +275,7 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
unsigned int isr;
- isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+ isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
spin_lock(&port->lock);
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
@@ -268,14 +287,23 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
return IRQ_RETVAL(isr);
}
+static void altera_uart_timer(unsigned long data)
+{
+ struct uart_port *port = (void *)data;
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+ altera_uart_interrupt(0, port);
+ mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+}
+
static void altera_uart_config_port(struct uart_port *port, int flags)
{
port->type = PORT_ALTERA_UART;
/* Clear mask, so no surprise interrupts. */
- writel(0, port->membase + ALTERA_UART_CONTROL_REG);
+ altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
/* Clear status register */
- writel(0, port->membase + ALTERA_UART_STATUS_REG);
+ altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
}
static int altera_uart_startup(struct uart_port *port)
@@ -284,6 +312,12 @@ static int altera_uart_startup(struct uart_port *port)
unsigned long flags;
int ret;
+ if (!port->irq) {
+ setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
+ mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+ return 0;
+ }
+
ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
DRV_NAME, port);
if (ret) {
@@ -316,7 +350,10 @@ static void altera_uart_shutdown(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
- free_irq(port->irq, port);
+ if (port->irq)
+ free_irq(port->irq, port);
+ else
+ del_timer_sync(&pp->tmr);
}
static const char *altera_uart_type(struct uart_port *port)
@@ -384,8 +421,9 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
port->iotype = SERIAL_IO_MEM;
port->irq = platp[i].irq;
port->uartclk = platp[i].uartclk;
- port->flags = ASYNC_BOOT_AUTOCONF;
+ port->flags = UPF_BOOT_AUTOCONF;
port->ops = &altera_uart_ops;
+ port->private_data = platp;
}
return 0;
@@ -393,7 +431,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
static void altera_uart_console_putc(struct uart_port *port, const char c)
{
- while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
+ while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TRDY_MSK))
cpu_relax();
@@ -423,7 +461,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
return -EINVAL;
port = &altera_uart_ports[co->index].port;
- if (port->membase == 0)
+ if (!port->membase)
return -ENODEV;
if (options)
@@ -435,7 +473,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
static struct uart_driver altera_uart_driver;
static struct console altera_uart_console = {
- .name = "ttyS",
+ .name = "ttyAL",
.write = altera_uart_console_write,
.device = uart_console_device,
.setup = altera_uart_console_setup,
@@ -466,9 +504,9 @@ console_initcall(altera_uart_console_init);
static struct uart_driver altera_uart_driver = {
.owner = THIS_MODULE,
.driver_name = DRV_NAME,
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
+ .dev_name = "ttyAL",
+ .major = SERIAL_ALTERA_MAJOR,
+ .minor = SERIAL_ALTERA_MINOR,
.nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
.cons = ALTERA_UART_CONSOLE,
};
@@ -477,38 +515,55 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
{
struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
- int i;
+ struct resource *res_mem;
+ struct resource *res_irq;
+ int i = pdev->id;
- for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
- port = &altera_uart_ports[i].port;
+ /* -1 emphasizes that the platform must have one port, no .N suffix */
+ if (i == -1)
+ i = 0;
- port->line = i;
- port->type = PORT_ALTERA_UART;
- port->mapbase = platp[i].mapbase;
- port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
- port->iotype = SERIAL_IO_MEM;
- port->irq = platp[i].irq;
- port->uartclk = platp[i].uartclk;
- port->ops = &altera_uart_ops;
- port->flags = ASYNC_BOOT_AUTOCONF;
+ if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
+ return -EINVAL;
- uart_add_one_port(&altera_uart_driver, port);
- }
+ port = &altera_uart_ports[i].port;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_mem)
+ port->mapbase = res_mem->start;
+ else if (platp->mapbase)
+ port->mapbase = platp->mapbase;
+ else
+ return -EINVAL;
+
+ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res_irq)
+ port->irq = res_irq->start;
+ else if (platp->irq)
+ port->irq = platp->irq;
+
+ port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+ if (!port->membase)
+ return -ENOMEM;
+
+ port->line = i;
+ port->type = PORT_ALTERA_UART;
+ port->iotype = SERIAL_IO_MEM;
+ port->uartclk = platp->uartclk;
+ port->ops = &altera_uart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->private_data = platp;
+
+ uart_add_one_port(&altera_uart_driver, port);
return 0;
}
static int __devexit altera_uart_remove(struct platform_device *pdev)
{
- struct uart_port *port;
- int i;
-
- for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) {
- port = &altera_uart_ports[i].port;
- if (port)
- uart_remove_one_port(&altera_uart_driver, port);
- }
+ struct uart_port *port = &altera_uart_ports[pdev->id].port;
+ uart_remove_one_port(&altera_uart_driver, port);
return 0;
}
@@ -550,3 +605,4 @@ MODULE_DESCRIPTION("Altera UART driver");
MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 5318dd3774ae..6f1b51e231e4 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -131,7 +131,12 @@ static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
tclkdiv = sclk / (2 * baud_rate) - 1;
- rclkdiv = sclk / (2 * baud_rate * 2) - 1;
+ /* The actual uart baud rate of devices vary between +/-2%. The sport
+ * RX sample rate should be faster than the double of the worst case,
+ * otherwise, wrong data are received. So, set sport RX clock to be
+ * 3% faster.
+ */
+ rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1;
SPORT_PUT_TCLKDIV(up, tclkdiv);
SPORT_PUT_RCLKDIV(up, rclkdiv);
SSYNC();
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 66ecc7ab6dab..dfcf4b1878aa 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -327,14 +327,13 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
- while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
+ while (!uart_circ_empty(xmit) &&
+ !(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
sport->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 93de907b1208..ee43efc7bdcc 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2017,6 +2017,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
struct ioc3_port *port;
struct ioc3_port *ports[PORTS_PER_CARD];
int phys_port;
+ int cnt;
DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd));
@@ -2044,6 +2045,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
if (!port) {
printk(KERN_WARNING
"IOC3 serial memory not available for port\n");
+ ret = -ENOMEM;
goto out4;
}
spin_lock_init(&port->ip_lock);
@@ -2146,6 +2148,9 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
/* error exits that give back resources */
out4:
+ for (cnt = 0; cnt < phys_port; cnt++)
+ kfree(ports[cnt]);
+
kfree(card_ptr);
return ret;
}
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index eaf545014119..18f548449c63 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -172,13 +172,15 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
jsm_uart_port_init here! */
dev_err(&pdev->dev, "memory allocation for flipbuf failed\n");
rc = -ENOMEM;
- goto out_free_irq;
+ goto out_free_uart;
}
pci_set_drvdata(pdev, brd);
pci_save_state(pdev);
return 0;
+ out_free_uart:
+ jsm_remove_uart_port(brd);
out_free_irq:
jsm_remove_uart_port(brd);
free_irq(brd->irq, brd);
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index 39f9a1adaa75..d4b711c9a416 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -243,7 +243,7 @@ static struct kgdb_io kgdboc_io_ops = {
#ifdef CONFIG_KGDB_SERIAL_CONSOLE
/* This is only available if kgdboc is a built in for early debugging */
-int __init kgdboc_early_init(char *opt)
+static int __init kgdboc_early_init(char *opt)
{
/* save the first character of the config string because the
* init routine can destroy it.
diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c
index 67283c1a57ff..910870edf708 100644
--- a/drivers/serial/max3107.c
+++ b/drivers/serial/max3107.c
@@ -986,12 +986,14 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
if (!s->rxbuf) {
pr_err("Allocating RX buffer failed\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err_free4;
}
s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
if (!s->rxstr) {
pr_err("Allocating RX buffer failed\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err_free3;
}
/* SPI Tx buffer
* SPI transfer buffer
@@ -1002,7 +1004,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
if (!s->txbuf) {
pr_err("Allocating TX buffer failed\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err_free2;
}
/* Initialize shared data lock */
spin_lock_init(&s->data_lock);
@@ -1021,13 +1024,15 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
buf[0] = MAX3107_REVID_REG;
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
- return -EIO;
+ retval = -EIO;
+ goto err_free1;
}
if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
(buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
dev_err(&s->spi->dev, "REVID %x does not match\n",
(buf[0] & MAX3107_SPI_RX_DATA_MASK));
- return -ENODEV;
+ retval = -ENODEV;
+ goto err_free1;
}
/* Disable all interrupts */
@@ -1047,7 +1052,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
dev_err(&s->spi->dev, "SPI transfer for init failed\n");
- return -EIO;
+ retval = -EIO;
+ goto err_free1;
}
/* Register UART driver */
@@ -1055,7 +1061,7 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
retval = uart_register_driver(&max3107_uart_driver);
if (retval) {
dev_err(&s->spi->dev, "Registering UART driver failed\n");
- return retval;
+ goto err_free1;
}
driver_registered = 1;
}
@@ -1074,13 +1080,13 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
retval = uart_add_one_port(&max3107_uart_driver, &s->port);
if (retval < 0) {
dev_err(&s->spi->dev, "Adding UART port failed\n");
- return retval;
+ goto err_free1;
}
if (pdata->configure) {
retval = pdata->configure(s);
if (retval < 0)
- return retval;
+ goto err_free1;
}
/* Go to suspend mode */
@@ -1088,6 +1094,16 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
pdata->hw_suspend(s, 1);
return 0;
+
+err_free1:
+ kfree(s->txbuf);
+err_free2:
+ kfree(s->rxstr);
+err_free3:
+ kfree(s->rxbuf);
+err_free4:
+ kfree(s);
+ return retval;
}
EXPORT_SYMBOL_GPL(max3107_probe);
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 324c385a653d..5fc699e929dc 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
@@ -171,6 +172,9 @@ static ssize_t port_show_regs(struct file *file, char __user *user_buf,
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
+ if (len > HSU_REGS_BUFSIZE)
+ len = HSU_REGS_BUFSIZE;
+
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
@@ -218,6 +222,9 @@ static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
+ if (len > HSU_REGS_BUFSIZE)
+ len = HSU_REGS_BUFSIZE;
+
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
@@ -227,12 +234,14 @@ static const struct file_operations port_regs_ops = {
.owner = THIS_MODULE,
.open = hsu_show_regs_open,
.read = port_show_regs,
+ .llseek = default_llseek,
};
static const struct file_operations dma_regs_ops = {
.owner = THIS_MODULE,
.open = hsu_show_regs_open,
.read = dma_show_regs,
+ .llseek = default_llseek,
};
static int hsu_debugfs_init(struct hsu_port *hsu)
@@ -922,39 +931,52 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
cval |= UART_LCR_EPAR;
/*
+ * The base clk is 50Mhz, and the baud rate come from:
+ * baud = 50M * MUL / (DIV * PS * DLAB)
+ *
* For those basic low baud rate we can get the direct
- * scalar from 2746800, like 115200 = 2746800/24, for those
- * higher baud rate, we have to handle them case by case,
- * but DIV reg is never touched as its default value 0x3d09
+ * scalar from 2746800, like 115200 = 2746800/24. For those
+ * higher baud rate, we handle them case by case, mainly by
+ * adjusting the MUL/PS registers, and DIV register is kept
+ * as default value 0x3d09 to make things simple
*/
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
- quot = uart_get_divisor(port, baud);
+ quot = 1;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
- quot = 1;
+ break;
+ case 3000000:
+ mul = 0x2EE0;
break;
case 2500000:
mul = 0x2710;
- ps = 0x10;
- quot = 1;
break;
- case 18432000:
+ case 2000000:
+ mul = 0x1F40;
+ break;
+ case 1843200:
mul = 0x2400;
- ps = 0x10;
- quot = 1;
break;
case 1500000:
- mul = 0x1D4C;
- ps = 0xc;
- quot = 1;
+ mul = 0x1770;
+ break;
+ case 1000000:
+ mul = 0xFA0;
+ break;
+ case 500000:
+ mul = 0x7D0;
break;
default:
- ;
+ /* Use uart_get_divisor to get quot for other baud rates */
+ quot = 0;
}
+ if (!quot)
+ quot = uart_get_divisor(port, baud);
+
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B;
else if ((up->port.uartclk / quot) < (230400 * 16))
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index f6ad1ecbff79..b62857bf2fdb 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -1,7 +1,7 @@
/*
- * max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
+ * mrst_max3110.c - spi uart protocol driver for Maxim 3110
*
- * Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
+ * Copyright (c) 2008-2010, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -29,20 +29,16 @@
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/kthread.h>
-#include <linux/delay.h>
-#include <asm/atomic.h>
#include <linux/spi/spi.h>
-#include <linux/spi/dw_spi.h>
#include "mrst_max3110.h"
@@ -55,7 +51,7 @@
struct uart_max3110 {
struct uart_port port;
struct spi_device *spi;
- char *name;
+ char name[24];
wait_queue_head_t wq;
struct task_struct *main_thread;
@@ -66,35 +62,30 @@ struct uart_max3110 {
u16 cur_conf;
u8 clock;
u8 parity, word_7bits;
+ u16 irq;
unsigned long uart_flags;
/* console related */
struct circ_buf con_xmit;
-
- /* irq related */
- u16 irq;
};
/* global data structure, may need be removed */
-struct uart_max3110 *pmax;
-static inline void receive_char(struct uart_max3110 *max, u8 ch);
+static struct uart_max3110 *pmax;
+
static void receive_chars(struct uart_max3110 *max,
unsigned char *str, int len);
-static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
-static void max3110_console_receive(struct uart_max3110 *max);
+static int max3110_read_multi(struct uart_max3110 *max, u8 *buf);
+static void max3110_con_receive(struct uart_max3110 *max);
-int max3110_write_then_read(struct uart_max3110 *max,
- const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
+static int max3110_write_then_read(struct uart_max3110 *max,
+ const void *txbuf, void *rxbuf, unsigned len, int always_fast)
{
struct spi_device *spi = max->spi;
struct spi_message message;
struct spi_transfer x;
int ret;
- if (!txbuf || !rxbuf)
- return -EINVAL;
-
spi_message_init(&message);
memset(&x, 0, sizeof x);
x.len = len;
@@ -103,7 +94,7 @@ int max3110_write_then_read(struct uart_max3110 *max,
spi_message_add_tail(&x, &message);
if (always_fast)
- x.speed_hz = 3125000;
+ x.speed_hz = spi->max_speed_hz;
else if (max->baud)
x.speed_hz = max->baud;
@@ -112,58 +103,80 @@ int max3110_write_then_read(struct uart_max3110 *max,
return ret;
}
-/* Write a u16 to the device, and return one u16 read back */
-int max3110_out(struct uart_max3110 *max, const u16 out)
+/* Write a 16b word to the device */
+static int max3110_out(struct uart_max3110 *max, const u16 out)
{
- u16 tmp;
+ void *buf;
+ u16 *obuf, *ibuf;
+ u8 ch;
int ret;
- ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
- if (ret)
- return ret;
+ buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
+ if (!buf)
+ return -ENOMEM;
+
+ obuf = buf;
+ ibuf = buf + 4;
+ *obuf = out;
+ ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
+ if (ret) {
+ pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n",
+ __func__, ret, out);
+ goto exit;
+ }
/* If some valid data is read back */
- if (tmp & MAX3110_READ_DATA_AVAILABLE)
- receive_char(max, (tmp & 0xff));
+ if (*ibuf & MAX3110_READ_DATA_AVAILABLE) {
+ ch = *ibuf & 0xff;
+ receive_chars(max, &ch, 1);
+ }
+exit:
+ kfree(buf);
return ret;
}
-#define MAX_READ_LEN 20
/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
- * need any delay like flushing character out. It returns how many
- * valide bytes are read back
+ * need any delay like flushing character out.
+ *
+ * Return how many valide bytes are read back
*/
-static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
+static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf)
{
- u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
- u8 *pbuf, valid_str[MAX_READ_LEN];
- int i, j, bytelen;
+ void *buf;
+ u16 *obuf, *ibuf;
+ u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH];
+ int i, j, blen;
- if (len > MAX_READ_LEN) {
- pr_err(PR_FMT "read len %d is too large\n", len);
+ blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
+ buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
+ if (!buf) {
+ pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__);
return 0;
}
- bytelen = len * 2;
- memset(out, 0, bytelen);
- memset(in, 0, bytelen);
+ /* tx/rx always have the same length */
+ obuf = buf;
+ ibuf = buf + blen;
- if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
+ if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
+ kfree(buf);
return 0;
+ }
- /* If caller don't provide a buffer, then handle received char */
- pbuf = buf ? buf : valid_str;
+ /* If caller doesn't provide a buffer, then handle received char */
+ pbuf = rxbuf ? rxbuf : valid_str;
- for (i = 0, j = 0; i < len; i++) {
- if (in[i] & MAX3110_READ_DATA_AVAILABLE)
- pbuf[j++] = (u8)(in[i] & 0xff);
+ for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) {
+ if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
+ pbuf[j++] = ibuf[i] & 0xff;
}
if (j && (pbuf == valid_str))
receive_chars(max, valid_str, j);
+ kfree(buf);
return j;
}
@@ -177,10 +190,6 @@ static void serial_m3110_con_putchar(struct uart_port *port, int ch)
xmit->buf[xmit->head] = (char)ch;
xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
}
-
-
- if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
- wake_up_process(max->main_thread);
}
/*
@@ -196,6 +205,9 @@ static void serial_m3110_con_write(struct console *co,
return;
uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
+
+ if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags))
+ wake_up_process(pmax->main_thread);
}
static int __init
@@ -209,6 +221,9 @@ serial_m3110_con_setup(struct console *co, char *options)
pr_info(PR_FMT "setting up console\n");
+ if (co->index == -1)
+ co->index = 0;
+
if (!max) {
pr_err(PR_FMT "pmax is NULL, return");
return -ENODEV;
@@ -239,8 +254,6 @@ static struct console serial_m3110_console = {
.data = &serial_m3110_reg,
};
-#define MRST_CONSOLE (&serial_m3110_console)
-
static unsigned int serial_m3110_tx_empty(struct uart_port *port)
{
return 1;
@@ -258,32 +271,44 @@ static void serial_m3110_stop_rx(struct uart_port *port)
}
#define WORDS_PER_XFER 128
-static inline void send_circ_buf(struct uart_max3110 *max,
+static void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
- int len, left = 0;
- u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
+ void *buf;
+ u16 *obuf, *ibuf;
u8 valid_str[WORDS_PER_XFER];
- int i, j;
+ int i, j, len, blen, dma_size, left, ret = 0;
+
+
+ dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
+ buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
+ if (!buf)
+ return;
+ obuf = buf;
+ ibuf = buf + dma_size/2;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
- len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
+ len = min(left, WORDS_PER_XFER);
+ blen = len * sizeof(u16);
+ memset(ibuf, 0, blen);
- memset(obuf, 0, len * 2);
- memset(ibuf, 0, len * 2);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
- max3110_write_then_read(max, (u8 *)obuf,
- (u8 *)ibuf, len * 2, 0);
+
+ /* Fail to send msg to console is not very critical */
+ ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
+ if (ret)
+ pr_warning(PR_FMT "%s(): get err msg %d\n",
+ __func__, ret);
for (i = 0, j = 0; i < len; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
- valid_str[j++] = (u8)(ibuf[i] & 0xff);
+ valid_str[j++] = ibuf[i] & 0xff;
}
if (j)
@@ -293,6 +318,8 @@ static inline void send_circ_buf(struct uart_max3110 *max,
left -= len;
}
}
+
+ kfree(buf);
}
static void transmit_char(struct uart_max3110 *max)
@@ -312,8 +339,10 @@ static void transmit_char(struct uart_max3110 *max)
serial_m3110_stop_tx(port);
}
-/* This will be called by uart_write() and tty_write, can't
- * go to sleep */
+/*
+ * This will be called by uart_write() and tty_write, can't
+ * go to sleep
+ */
static void serial_m3110_start_tx(struct uart_port *port)
{
struct uart_max3110 *max =
@@ -335,7 +364,7 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
tty = port->state->port.tty;
if (!tty)
- return; /* receive some char before the tty is opened */
+ return;
while (len) {
usable = tty_buffer_request_room(tty, len);
@@ -343,32 +372,37 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
tty_insert_flip_string(tty, str, usable);
str += usable;
port->icount.rx += usable;
- tty_flip_buffer_push(tty);
}
len -= usable;
}
+ tty_flip_buffer_push(tty);
}
-static inline void receive_char(struct uart_max3110 *max, u8 ch)
-{
- receive_chars(max, &ch, 1);
-}
-
-static void max3110_console_receive(struct uart_max3110 *max)
+/*
+ * This routine will be used in read_thread or RX IRQ handling,
+ * it will first do one round buffer read(8 words), if there is some
+ * valid RX data, will try to read 5 more rounds till all data
+ * is read out.
+ *
+ * Use stack space as data buffer to save some system load, and chose
+ * 504 Btyes as a threadhold to do a bulk push to upper tty layer when
+ * receiving bulk data, a much bigger buffer may cause stack overflow
+ */
+static void max3110_con_receive(struct uart_max3110 *max)
{
int loop = 1, num, total = 0;
u8 recv_buf[512], *pbuf;
pbuf = recv_buf;
do {
- num = max3110_read_multi(max, 8, pbuf);
+ num = max3110_read_multi(max, pbuf);
if (num) {
- loop = 10;
+ loop = 5;
pbuf += num;
total += num;
- if (total >= 500) {
+ if (total >= 504) {
receive_chars(max, recv_buf, total);
pbuf = recv_buf;
total = 0;
@@ -396,7 +430,7 @@ static int max3110_main_thread(void *_max)
mutex_lock(&max->thread_mutex);
if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
- max3110_console_receive(max);
+ max3110_con_receive(max);
/* first handle console output */
if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
@@ -413,7 +447,6 @@ static int max3110_main_thread(void *_max)
return ret;
}
-#ifdef CONFIG_MRST_MAX3110_IRQ
static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
{
struct uart_max3110 *max = dev_id;
@@ -425,7 +458,7 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#else
+
/* if don't use RX IRQ, then need a thread to polling read */
static int max3110_read_thread(void *_max)
{
@@ -433,9 +466,14 @@ static int max3110_read_thread(void *_max)
pr_info(PR_FMT "start read thread\n");
do {
- mutex_lock(&max->thread_mutex);
- max3110_console_receive(max);
- mutex_unlock(&max->thread_mutex);
+ /*
+ * If can't acquire the mutex, it means the main thread
+ * is running which will also perform the rx job
+ */
+ if (mutex_trylock(&max->thread_mutex)) {
+ max3110_con_receive(max);
+ mutex_unlock(&max->thread_mutex);
+ }
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ / 20);
@@ -443,7 +481,6 @@ static int max3110_read_thread(void *_max)
return 0;
}
-#endif
static int serial_m3110_startup(struct uart_port *port)
{
@@ -452,33 +489,54 @@ static int serial_m3110_startup(struct uart_port *port)
u16 config = 0;
int ret = 0;
- if (port->line != 0)
+ if (port->line != 0) {
pr_err(PR_FMT "uart port startup failed\n");
+ return -1;
+ }
- /* firstly disable all IRQ and config it to 115200, 8n1 */
+ /* Disable all IRQ and config it to 115200, 8n1 */
config = WC_TAG | WC_FIFO_ENABLE
| WC_1_STOPBITS
| WC_8BIT_WORD
| WC_BAUD_DR2;
- ret = max3110_out(max, config);
/* as we use thread to handle tx/rx, need set low latency */
port->state->port.tty->low_latency = 1;
-#ifdef CONFIG_MRST_MAX3110_IRQ
- ret = request_irq(max->irq, serial_m3110_irq,
+ if (max->irq) {
+ max->read_thread = NULL;
+ ret = request_irq(max->irq, serial_m3110_irq,
IRQ_TYPE_EDGE_FALLING, "max3110", max);
- if (ret)
- return ret;
+ if (ret) {
+ max->irq = 0;
+ pr_err(PR_FMT "unable to allocate IRQ, polling\n");
+ } else {
+ /* Enable RX IRQ only */
+ config |= WC_RXA_IRQ_ENABLE;
+ }
+ }
- /* enable RX IRQ only */
- config |= WC_RXA_IRQ_ENABLE;
- max3110_out(max, config);
-#else
- /* if IRQ is disabled, start a read thread for input data */
- max->read_thread =
- kthread_run(max3110_read_thread, max, "max3110_read");
-#endif
+ if (max->irq == 0) {
+ /* If IRQ is disabled, start a read thread for input data */
+ max->read_thread =
+ kthread_run(max3110_read_thread, max, "max3110_read");
+ if (IS_ERR(max->read_thread)) {
+ ret = PTR_ERR(max->read_thread);
+ max->read_thread = NULL;
+ pr_err(PR_FMT "Can't create read thread!\n");
+ return ret;
+ }
+ }
+
+ ret = max3110_out(max, config);
+ if (ret) {
+ if (max->irq)
+ free_irq(max->irq, max);
+ if (max->read_thread)
+ kthread_stop(max->read_thread);
+ max->read_thread = NULL;
+ return ret;
+ }
max->cur_conf = config;
return 0;
@@ -495,9 +553,8 @@ static void serial_m3110_shutdown(struct uart_port *port)
max->read_thread = NULL;
}
-#ifdef CONFIG_MRST_MAX3110_IRQ
- free_irq(max->irq, max);
-#endif
+ if (max->irq)
+ free_irq(max->irq, max);
/* Disable interrupts from this port */
config = WC_TAG | WC_SW_SHDI;
@@ -515,8 +572,7 @@ static int serial_m3110_request_port(struct uart_port *port)
static void serial_m3110_config_port(struct uart_port *port, int flags)
{
- /* give it fake type */
- port->type = PORT_PXA;
+ port->type = PORT_MAX3100;
}
static int
@@ -551,6 +607,9 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
new_conf |= WC_7BIT_WORD;
break;
default:
+ /* We only support CS7 & CS8 */
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
case CS8:
cval = UART_LCR_WLEN8;
new_conf |= WC_8BIT_WORD;
@@ -559,7 +618,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
- /* first calc the div for 1.8MHZ clock case */
+ /* First calc the div for 1.8MHZ clock case */
switch (baud) {
case 300:
clk_div = WC_BAUD_DR384;
@@ -595,7 +654,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
if (max->clock & MAX3110_HIGH_CLK)
break;
default:
- /* pick the previous baud rate */
+ /* Pick the previous baud rate */
baud = max->baud;
clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -603,15 +662,21 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
if (max->clock & MAX3110_HIGH_CLK) {
clk_div += 1;
- /* high clk version max3110 doesn't support B300 */
- if (baud == 300)
+ /* High clk version max3110 doesn't support B300 */
+ if (baud == 300) {
baud = 600;
+ clk_div = WC_BAUD_DR384;
+ }
if (baud == 230400)
clk_div = WC_BAUD_DR1;
tty_termios_encode_baud_rate(termios, baud, baud);
}
new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
+
+ if (unlikely(termios->c_cflag & CMSPAR))
+ termios->c_cflag &= ~CMSPAR;
+
if (termios->c_cflag & CSTOPB)
new_conf |= WC_2_STOPBITS;
else
@@ -631,13 +696,14 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
new_conf |= WC_TAG;
if (new_conf != max->cur_conf) {
- max3110_out(max, new_conf);
- max->cur_conf = new_conf;
- max->baud = baud;
+ if (!max3110_out(max, new_conf)) {
+ max->cur_conf = new_conf;
+ max->baud = baud;
+ }
}
}
-/* don't handle hw handshaking */
+/* Don't handle hw handshaking */
static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
@@ -671,7 +737,7 @@ struct uart_ops serial_m3110_ops = {
.break_ctl = serial_m3110_break_ctl,
.startup = serial_m3110_startup,
.shutdown = serial_m3110_shutdown,
- .set_termios = serial_m3110_set_termios, /* must have */
+ .set_termios = serial_m3110_set_termios,
.pm = serial_m3110_pm,
.type = serial_m3110_type,
.release_port = serial_m3110_release_port,
@@ -687,52 +753,60 @@ static struct uart_driver serial_m3110_reg = {
.major = TTY_MAJOR,
.minor = 64,
.nr = 1,
- .cons = MRST_CONSOLE,
+ .cons = &serial_m3110_console,
};
+#ifdef CONFIG_PM
static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
{
+ struct uart_max3110 *max = spi_get_drvdata(spi);
+
+ disable_irq(max->irq);
+ uart_suspend_port(&serial_m3110_reg, &max->port);
+ max3110_out(max, max->cur_conf | WC_SW_SHDI);
return 0;
}
static int serial_m3110_resume(struct spi_device *spi)
{
+ struct uart_max3110 *max = spi_get_drvdata(spi);
+
+ max3110_out(max, max->cur_conf);
+ uart_resume_port(&serial_m3110_reg, &max->port);
+ enable_irq(max->irq);
return 0;
}
+#else
+#define serial_m3110_suspend NULL
+#define serial_m3110_resume NULL
+#endif
-static struct dw_spi_chip spi0_uart = {
- .poll_mode = 1,
- .enable_dma = 0,
- .type = SPI_FRF_SPI,
-};
-
-static int serial_m3110_probe(struct spi_device *spi)
+static int __devinit serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
- int ret;
- unsigned char *buffer;
+ void *buffer;
u16 res;
+ int ret = 0;
+
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
- /* set spi info */
- spi->mode = SPI_MODE_0;
+ /* Set spi info */
spi->bits_per_word = 16;
max->clock = MAX3110_HIGH_CLK;
- spi->controller_data = &spi0_uart;
spi_setup(spi);
- max->port.type = PORT_PXA; /* need apply for a max3110 type */
- max->port.fifosize = 2; /* only have 16b buffer */
+ max->port.type = PORT_MAX3100;
+ max->port.fifosize = 2; /* Only have 16b buffer */
max->port.ops = &serial_m3110_ops;
max->port.line = 0;
max->port.dev = &spi->dev;
max->port.uartclk = 115200;
max->spi = spi;
- max->name = spi->modalias; /* use spi name as the name */
+ strcpy(max->name, spi->modalias);
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
@@ -754,13 +828,15 @@ static int serial_m3110_probe(struct spi_device *spi)
ret = -ENODEV;
goto err_get_page;
}
- buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
+
+ buffer = (void *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err_get_page;
}
- max->con_xmit.buf = (unsigned char *)buffer;
- max->con_xmit.head = max->con_xmit.tail = 0;
+ max->con_xmit.buf = buffer;
+ max->con_xmit.head = 0;
+ max->con_xmit.tail = 0;
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
@@ -769,8 +845,10 @@ static int serial_m3110_probe(struct spi_device *spi)
goto err_kthread;
}
+ spi_set_drvdata(spi, max);
pmax = max;
- /* give membase a psudo value to pass serial_core's check */
+
+ /* Give membase a psudo value to pass serial_core's check */
max->port.membase = (void *)0xff110000;
uart_add_one_port(&serial_m3110_reg, &max->port);
@@ -779,19 +857,17 @@ static int serial_m3110_probe(struct spi_device *spi)
err_kthread:
free_page((unsigned long)buffer);
err_get_page:
- pmax = NULL;
kfree(max);
return ret;
}
-static int max3110_remove(struct spi_device *dev)
+static int __devexit serial_m3110_remove(struct spi_device *dev)
{
- struct uart_max3110 *max = pmax;
+ struct uart_max3110 *max = spi_get_drvdata(dev);
- if (!pmax)
+ if (!max)
return 0;
- pmax = NULL;
uart_remove_one_port(&serial_m3110_reg, &max->port);
free_page((unsigned long)max->con_xmit.buf);
@@ -810,13 +886,12 @@ static struct spi_driver uart_max3110_driver = {
.owner = THIS_MODULE,
},
.probe = serial_m3110_probe,
- .remove = __devexit_p(max3110_remove),
+ .remove = __devexit_p(serial_m3110_remove),
.suspend = serial_m3110_suspend,
.resume = serial_m3110_resume,
};
-
-int __init serial_m3110_init(void)
+static int __init serial_m3110_init(void)
{
int ret = 0;
@@ -831,7 +906,7 @@ int __init serial_m3110_init(void)
return ret;
}
-void __exit serial_m3110_exit(void)
+static void __exit serial_m3110_exit(void)
{
spi_unregister_driver(&uart_max3110_driver);
uart_unregister_driver(&serial_m3110_reg);
@@ -840,5 +915,5 @@ void __exit serial_m3110_exit(void)
module_init(serial_m3110_init);
module_exit(serial_m3110_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("max3110-uart");
diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h
index 363478acb2c3..d1ef43af397c 100644
--- a/drivers/serial/mrst_max3110.h
+++ b/drivers/serial/mrst_max3110.h
@@ -56,4 +56,5 @@
#define WC_BAUD_DR192 (0xE)
#define WC_BAUD_DR384 (0xF)
+#define M3110_RX_FIFO_DEPTH 8
#endif
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index b1156ba8ad14..7ac2bf5167cd 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
port->mapbase = res->start;
- port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
+ port->membase = S3C_VA_UART + (res->start & 0xfffff);
ret = platform_get_irq(platdev, 0);
if (ret < 0)
port->irq = 0;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index cd8511298bcb..c4ea14670d44 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1074,10 +1074,10 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
-static int uart_get_count(struct uart_state *state,
- struct serial_icounter_struct __user *icnt)
+static int uart_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
{
- struct serial_icounter_struct icount;
+ struct uart_state *state = tty->driver_data;
struct uart_icount cnow;
struct uart_port *uport = state->uart_port;
@@ -1085,19 +1085,19 @@ static int uart_get_count(struct uart_state *state,
memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
spin_unlock_irq(&uport->lock);
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
- return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+ return 0;
}
/*
@@ -1150,10 +1150,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
case TIOCMIWAIT:
ret = uart_wait_modem_status(state, arg);
break;
-
- case TIOCGICOUNT:
- ret = uart_get_count(state, uarg);
- break;
}
if (ret != -ENOIOCTLCMD)
@@ -2065,7 +2061,19 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
/*
* Re-enable the console device after suspending.
*/
- if (uart_console(uport)) {
+ if (console_suspend_enabled && uart_console(uport)) {
+ /*
+ * First try to use the console cflag setting.
+ */
+ memset(&termios, 0, sizeof(struct ktermios));
+ termios.c_cflag = uport->cons->cflag;
+
+ /*
+ * If that's unset, use the tty termios setting.
+ */
+ if (port->tty && port->tty->termios && termios.c_cflag == 0)
+ termios = *(port->tty->termios);
+
uart_change_pm(state, 0);
uport->ops->set_termios(uport, &termios, NULL);
console_start(uport->cons);
@@ -2283,6 +2291,7 @@ static const struct tty_operations uart_ops = {
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
+ .get_icount = uart_get_icount,
#ifdef CONFIG_CONSOLE_POLL
.poll_init = uart_poll_init,
.poll_get_char = uart_poll_get_char,
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7d475b2a79e8..93760b2ea172 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -45,7 +45,6 @@
#include <asm/io.h>
#include <asm/system.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
@@ -183,10 +182,8 @@ static void quirk_config_socket(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- if (info->multi) {
- link->conf.Present |= PRESENT_EXT_STATUS;
- link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
- }
+ if (info->multi)
+ link->config_flags |= CONF_ENABLE_ESR;
}
static const struct serial_quirk quirks[] = {
@@ -265,13 +262,6 @@ static const struct serial_quirk quirks[] = {
static int serial_config(struct pcmcia_device * link);
-/*======================================================================
-
- After a card is removed, serial_remove() will unregister
- the serial device(s), and release the PCMCIA configuration.
-
-======================================================================*/
-
static void serial_remove(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -314,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link)
return 0;
}
-/*======================================================================
-
- serial_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
@@ -335,25 +317,13 @@ static int serial_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->conf.Attributes = CONF_ENABLE_IRQ;
- if (do_sound) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
- link->conf.IntType = INT_MEMORY_AND_IO;
+ link->config_flags |= CONF_ENABLE_IRQ;
+ if (do_sound)
+ link->config_flags |= CONF_ENABLE_SPKR;
return serial_config(link);
}
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void serial_detach(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -361,11 +331,6 @@ static void serial_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "serial_detach\n");
/*
- * Ensure any outstanding scheduled tasks are completed.
- */
- flush_scheduled_work();
-
- /*
* Ensure that the ports have been released.
*/
serial_remove(link);
@@ -430,47 +395,45 @@ static int pfc_config(struct pcmcia_device *p_dev)
return -ENODEV;
}
-static int simple_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
static const int size_table[2] = { 8, 16 };
int *try = priv_data;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->conf.Vpp =
- cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if (p_dev->resource[0]->start == 0)
+ return -ENODEV;
- p_dev->io_lines = ((*try & 0x1) == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if ((*try & 0x1) == 0)
+ p_dev->io_lines = 16;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
- && (cf->io.win[0].base != 0)) {
- p_dev->resource[0]->start = cf->io.win[0].base;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
- return -EINVAL;
+ if (p_dev->resource[0]->end != size_table[(*try >> 1)])
+ return -ENODEV;
+
+ p_dev->resource[0]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+ return pcmcia_request_io(p_dev);
}
static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
int j;
- if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- for (j = 0; j < 5; j++) {
- p_dev->resource[0]->start = base[j];
- p_dev->io_lines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
+ if (p_dev->io_lines > 3)
+ return -ENODEV;
+
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 8;
+
+ for (j = 0; j < 5; j++) {
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
+ return 0;
}
return -ENODEV;
}
@@ -480,11 +443,9 @@ static int simple_config(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i = -ENODEV, try;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[0]->end = 8;
-
/* First pass: look for a config entry that looks normal.
* Two tries: without IO aliases, then with aliases */
+ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO;
for (try = 0; try < 4; try++)
if (!pcmcia_loop_config(link, simple_config_check, &try))
goto found_port;
@@ -500,7 +461,7 @@ static int simple_config(struct pcmcia_device *link)
found_port:
if (info->multi && (info->manfid == MANFID_3COM))
- link->conf.ConfigIndex &= ~(0x08);
+ link->config_index &= ~(0x08);
/*
* Apply any configuration quirks.
@@ -508,51 +469,50 @@ found_port:
if (info->quirk && info->quirk->config)
info->quirk->config(link);
- i = pcmcia_request_configuration(link, &link->conf);
+ i = pcmcia_enable_device(link);
if (i != 0)
return -1;
return setup_serial(link, info, link->resource[0]->start, link->irq);
}
-static int multi_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
- int *base2 = priv_data;
+ int *multi = priv_data;
+
+ if (p_dev->resource[1]->end)
+ return -EINVAL;
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
- if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->resource[0]->start = cf->io.win[0].base;
- p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev)) {
- *base2 = p_dev->resource[0]->start + 8;
- return 0;
- }
- }
- return -ENODEV;
+ if (p_dev->resource[0]->end <= 8)
+ return -EINVAL;
+
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = *multi * 8;
+
+ if (pcmcia_request_io(p_dev))
+ return -ENODEV;
+ return 0;
}
static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
int *base2 = priv_data;
- if (cf->io.nwin == 2) {
- p_dev->resource[0]->start = cf->io.win[0].base;
- p_dev->resource[1]->start = cf->io.win[1].base;
- p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev)) {
- *base2 = p_dev->resource[1]->start;
- return 0;
- }
- }
- return -ENODEV;
+ if (!p_dev->resource[0]->end || !p_dev->resource[1]->end)
+ return -ENODEV;
+
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+ if (pcmcia_request_io(p_dev))
+ return -ENODEV;
+
+ *base2 = p_dev->resource[0]->start + 8;
+ return 0;
}
static int multi_config(struct pcmcia_device *link)
@@ -560,12 +520,12 @@ static int multi_config(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i, base2 = 0;
+ link->config_flags |= CONF_AUTO_SET_IO;
/* First, look for a generic full-sized window */
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[0]->end = info->multi * 8;
- if (pcmcia_loop_config(link, multi_config_check, &base2)) {
+ if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
+ base2 = link->resource[0]->start + 8;
+ else {
/* If that didn't work, look for two windows */
- link->resource[0]->end = link->resource[1]->end = 8;
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
@@ -584,7 +544,7 @@ static int multi_config(struct pcmcia_device *link)
if (info->quirk && info->quirk->config)
info->quirk->config(link);
- i = pcmcia_request_configuration(link, &link->conf);
+ i = pcmcia_enable_device(link);
if (i != 0)
return -ENODEV;
@@ -596,11 +556,11 @@ static int multi_config(struct pcmcia_device *link)
info->prodid == PRODID_POSSIO_GCC)) {
int err;
- if (link->conf.ConfigIndex == 1 ||
- link->conf.ConfigIndex == 3) {
+ if (link->config_index == 1 ||
+ link->config_index == 3) {
err = setup_serial(link, info, base2,
link->irq);
- base2 = link->resource[0]->start;;
+ base2 = link->resource[0]->start;
} else {
err = setup_serial(link, info, link->resource[0]->start,
link->irq);
@@ -624,33 +584,24 @@ static int multi_config(struct pcmcia_device *link)
return 0;
}
-static int serial_check_for_multi(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
{
struct serial_info *info = p_dev->priv;
- if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
- info->multi = cf->io.win[0].len >> 3;
+ if (!p_dev->resource[0]->end)
+ return -EINVAL;
+
+ if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
+ info->multi = p_dev->resource[0]->end >> 3;
- if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
- (cf->io.win[1].len == 8))
+ if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
+ && (p_dev->resource[1]->end == 8))
info->multi = 2;
return 0; /* break */
}
-/*======================================================================
-
- serial_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- serial device available to the system.
-
-======================================================================*/
-
static int serial_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
@@ -894,9 +845,7 @@ MODULE_FIRMWARE("cis/RS-COM-2P.cis");
static struct pcmcia_driver serial_cs_driver = {
.owner = THIS_MODULE,
- .drv = {
- .name = "serial_cs",
- },
+ .name = "serial_cs",
.probe = serial_probe,
.remove = serial_detach,
.id_table = serial_ids,
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 9b03d7b3e456..c4bf54bb3fc7 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -322,6 +322,26 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
return -EINVAL;
}
+#ifdef CONFIG_CONSOLE_POLL
+static int ulite_get_poll_char(struct uart_port *port)
+{
+ if (!(ioread32be(port->membase + ULITE_STATUS)
+ & ULITE_STATUS_RXVALID))
+ return NO_POLL_CHAR;
+
+ return ioread32be(port->membase + ULITE_RX);
+}
+
+static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
+{
+ while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL)
+ cpu_relax();
+
+ /* write char to device */
+ iowrite32be(ch, port->membase + ULITE_TX);
+}
+#endif
+
static struct uart_ops ulite_ops = {
.tx_empty = ulite_tx_empty,
.set_mctrl = ulite_set_mctrl,
@@ -338,7 +358,11 @@ static struct uart_ops ulite_ops = {
.release_port = ulite_release_port,
.request_port = ulite_request_port,
.config_port = ulite_config_port,
- .verify_port = ulite_verify_port
+ .verify_port = ulite_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = ulite_get_poll_char,
+ .poll_put_char = ulite_put_poll_char,
+#endif
};
/* ---------------------------------------------------------------------
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 22:08:12 +0300