diff options
Diffstat (limited to 'drivers/serial')
34 files changed, 1451 insertions, 897 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 8c5c276c5577..7572665a8855 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -375,23 +375,18 @@ static void serial21285_setup_ports(void) } #ifdef CONFIG_SERIAL_21285_CONSOLE +static void serial21285_console_putchar(struct uart_port *port, int ch) +{ + while (*CSR_UARTFLG & 0x20) + barrier(); + *CSR_UARTDR = ch; +} static void serial21285_console_write(struct console *co, const char *s, unsigned int count) { - int i; - - for (i = 0; i < count; i++) { - while (*CSR_UARTFLG & 0x20) - barrier(); - *CSR_UARTDR = s[i]; - if (s[i] == '\n') { - while (*CSR_UARTFLG & 0x20) - barrier(); - *CSR_UARTDR = '\r'; - } - } + uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); } static void __init diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index 7f0f35a05dca..b88a7c1158af 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -101,8 +101,6 @@ struct tty_driver *serial_driver; #define RS_ISR_PASS_LIMIT 256 -#define _INLINE_ inline - static void change_speed(struct m68k_serial *info); /* @@ -262,7 +260,7 @@ static void batten_down_hatches(void) /* Drop into the debugger */ } -static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short status) +static void status_handle(struct m68k_serial *info, unsigned short status) { #if 0 if(status & DCD) { @@ -289,7 +287,8 @@ static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short stat return; } -static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *regs, unsigned short rx) +static void receive_chars(struct m68k_serial *info, struct pt_regs *regs, + unsigned short rx) { struct tty_struct *tty = info->tty; m68328_uart *uart = &uart_addr[info->line]; @@ -359,7 +358,7 @@ clear_and_exit: return; } -static _INLINE_ void transmit_chars(struct m68k_serial *info) +static void transmit_chars(struct m68k_serial *info) { m68328_uart *uart = &uart_addr[info->line]; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 244e8ff11977..5996d3cd0ed8 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2182,6 +2182,14 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) } } +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -2193,7 +2201,6 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; unsigned int ier; - int i; touch_nmi_watchdog(); @@ -2207,22 +2214,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) else serial_out(up, UART_IER, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up, UART_LSR_THRE); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up, UART_LSR_THRE); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, serial8250_console_putchar); /* * Finally, wait for transmitter to become empty @@ -2326,6 +2318,12 @@ static struct uart_driver serial8250_reg = { .cons = SERIAL8250_CONSOLE, }; +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ int __init early_serial_setup(struct uart_port *port) { if (port->line >= ARRAY_SIZE(serial8250_ports)) diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c index 59ba5d993b4b..7e511199b4c5 100644 --- a/drivers/serial/8250_early.c +++ b/drivers/serial/8250_early.c @@ -74,7 +74,7 @@ static void __init wait_for_xmitr(struct uart_port *port) } } -static void __init putc(struct uart_port *port, unsigned char c) +static void __init putc(struct uart_port *port, int c) { wait_for_xmitr(port); serial_out(port, UART_TX, c); @@ -89,12 +89,7 @@ static void __init early_uart_write(struct console *console, const char *s, unsi ier = serial_in(port, UART_IER); serial_out(port, UART_IER, 0); - while (*s && count-- > 0) { - putc(port, *s); - if (*s == '\n') - putc(port, '\r'); - s++; - } + uart_console_write(port, s, count, putc); /* Wait for transmitter to become empty and restore the IER */ wait_for_xmitr(port); diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c index 4315afe9c080..53e81a44c1a3 100644 --- a/drivers/serial/8250_hp300.c +++ b/drivers/serial/8250_hp300.c @@ -55,6 +55,8 @@ static struct dio_driver hpdca_driver = { #endif +static unsigned int num_ports; + extern int hp300_uart_scode; /* Offset to UART registers from base of DCA */ @@ -199,6 +201,8 @@ static int __devinit hpdca_init_one(struct dio_dev *d, out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); udelay(100); + num_ports++; + return 0; } #endif @@ -206,7 +210,6 @@ static int __devinit hpdca_init_one(struct dio_dev *d, static int __init hp300_8250_init(void) { static int called = 0; - int num_ports; #ifdef CONFIG_HPAPCI int line; unsigned long base; @@ -221,11 +224,8 @@ static int __init hp300_8250_init(void) if (!MACH_IS_HP300) return -ENODEV; - num_ports = 0; - #ifdef CONFIG_HPDCA - if (dio_module_init(&hpdca_driver) == 0) - num_ports++; + dio_register_driver(&hpdca_driver); #endif #ifdef CONFIG_HPAPCI if (hp300_model < HP_400) { diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index b3c561abe3f6..c66ef96c71b4 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -582,6 +582,13 @@ config SERIAL_SUNSAB_CONSOLE on your Sparc system as the console, you can do so by answering Y to this option. +config SERIAL_SUNHV + bool "Sun4v Hypervisor Console support" + depends on SPARC64 + help + This driver supports the console device found on SUN4V Sparc + systems. Say Y if you want to be able to use this device. + config SERIAL_IP22_ZILOG tristate "IP22 Zilog8530 serial support" depends on SGI_IP22 @@ -859,7 +866,7 @@ config SERIAL_M32R_PLDSIO config SERIAL_TXX9 bool "TMPTX39XX/49XX SIO support" - depends HAS_TXX9_SERIAL && BROKEN + depends HAS_TXX9_SERIAL select SERIAL_CORE default y diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index eaf8e01db198..50c221af9e6d 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_SERIAL_PXA) += pxa.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o +obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 321a3b3a5728..e04d5e82d9ae 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -591,12 +591,18 @@ static struct uart_amba_port amba_ports[UART_NR] = { #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE +static void pl010_console_putchar(struct uart_port *port, int ch) +{ + while (!UART_TX_READY(UART_GET_FR(port))) + barrier(); + UART_PUT_CHAR(port, ch); +} + static void pl010_console_write(struct console *co, const char *s, unsigned int count) { struct uart_port *port = &amba_ports[co->index].port; unsigned int status, old_cr; - int i; /* * First save the CR then disable the interrupts @@ -604,21 +610,7 @@ pl010_console_write(struct console *co, const char *s, unsigned int count) old_cr = UART_GET_CR(port); UART_PUT_CR(port, UART01x_CR_UARTEN); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = UART_GET_FR(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, s[i]); - if (s[i] == '\n') { - do { - status = UART_GET_FR(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, '\r'); - } - } + uart_console_write(port, s, count, pl010_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 034a029e356e..3d966cfc9a38 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -587,14 +587,12 @@ static struct uart_amba_port *amba_ports[UART_NR]; #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE -static inline void -pl011_console_write_char(struct uart_amba_port *uap, char ch) +static void pl011_console_putchar(struct uart_port *port, int ch) { - unsigned int status; + struct uart_amba_port *uap = (struct uart_amba_port *)port; - do { - status = readw(uap->port.membase + UART01x_FR); - } while (status & UART01x_FR_TXFF); + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + barrier(); writew(ch, uap->port.membase + UART01x_DR); } @@ -603,7 +601,6 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) { struct uart_amba_port *uap = amba_ports[co->index]; unsigned int status, old_cr, new_cr; - int i; clk_enable(uap->clk); @@ -615,14 +612,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; writew(new_cr, uap->port.membase + UART011_CR); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - pl011_console_write_char(uap, s[i]); - if (s[i] == '\n') - pl011_console_write_char(uap, '\r'); - } + uart_console_write(&uap->port, s, count, pl011_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index 2113feb75c39..6547fe0cef96 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -711,6 +711,12 @@ void __init at91_register_uart(int idx, int port) } #ifdef CONFIG_SERIAL_AT91_CONSOLE +static void at91_console_putchar(struct uart_port *port, int ch) +{ + while (!(UART_GET_CSR(port) & AT91_US_TXRDY)) + barrier(); + UART_PUT_CHAR(port, ch); +} /* * Interrupts are disabled on entering @@ -718,7 +724,7 @@ void __init at91_register_uart(int idx, int port) static void at91_console_write(struct console *co, const char *s, u_int count) { struct uart_port *port = at91_ports + co->index; - unsigned int status, i, imr; + unsigned int status, imr; /* * First, save IMR and then disable interrupts @@ -726,21 +732,7 @@ static void at91_console_write(struct console *co, const char *s, u_int count) imr = UART_GET_IMR(port); /* get interrupt mask */ UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = UART_GET_CSR(port); - } while (!(status & AT91_US_TXRDY)); - UART_PUT_CHAR(port, s[i]); - if (s[i] == '\n') { - do { - status = UART_GET_CSR(port); - } while (!(status & AT91_US_TXRDY)); - UART_PUT_CHAR(port, '\r'); - } - } + uart_console_write(port, s, count, at91_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c index 344022fe53ef..948880ac5878 100644 --- a/drivers/serial/au1x00_uart.c +++ b/drivers/serial/au1x00_uart.c @@ -133,13 +133,12 @@ static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { { "AU1X00_UART",16, UART_CLEAR_FIFO | UART_USE_FIFO }, }; -static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset) +static unsigned int serial_in(struct uart_8250_port *up, int offset) { return au_readl((unsigned long)up->port.membase + offset); } -static _INLINE_ void -serial_out(struct uart_8250_port *up, int offset, int value) +static void serial_out(struct uart_8250_port *up, int offset, int value) { au_writel(value, (unsigned long)up->port.membase + offset); } @@ -237,7 +236,7 @@ static void serial8250_enable_ms(struct uart_port *port) serial_out(up, UART_IER, up->ier); } -static _INLINE_ void +static void receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) { struct tty_struct *tty = up->port.info->tty; @@ -312,7 +311,7 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) spin_lock(&up->port.lock); } -static _INLINE_ void transmit_chars(struct uart_8250_port *up) +static void transmit_chars(struct uart_8250_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; @@ -346,7 +345,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up) serial8250_stop_tx(&up->port); } -static _INLINE_ void check_modem_status(struct uart_8250_port *up) +static void check_modem_status(struct uart_8250_port *up) { int status; @@ -1121,6 +1120,14 @@ static inline void wait_for_xmitr(struct uart_8250_port *up) } } +static void au1x00_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1132,7 +1139,6 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; unsigned int ier; - int i; /* * First save the UER then disable the interrupts @@ -1140,22 +1146,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) ier = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, au1x00_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index ce7b2e4ecd17..2691112c84ad 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -424,6 +424,13 @@ static struct uart_port clps711x_ports[UART_NR] = { }; #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE +static void clps711xuart_console_putchar(struct uart_port *port, int ch) +{ + while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) + barrier(); + clps_writel(ch, UARTDR(port)); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -438,7 +445,6 @@ clps711xuart_console_write(struct console *co, const char *s, { struct uart_port *port = clps711x_ports + co->index; unsigned int status, syscon; - int i; /* * Ensure that the port is enabled. @@ -446,21 +452,7 @@ clps711xuart_console_write(struct console *co, const char *s, syscon = clps_readl(SYSCON(port)); clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = clps_readl(SYSFLG(port)); - } while (status & SYSFLG_UTXFF); - clps_writel(s[i], UARTDR(port)); - if (s[i] == '\n') { - do { - status = clps_readl(SYSFLG(port)); - } while (status & SYSFLG_UTXFF); - clps_writel('\r', UARTDR(port)); - } - } + uart_console_write(port, s, count, clps711xuart_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index be12623d8544..89700141f87e 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -481,8 +481,6 @@ static char *serial_version = "$Revision: 1.25 $"; #include "serial_compat.h" #endif -#define _INLINE_ inline - struct tty_driver *serial_driver; /* serial subtype definitions */ @@ -591,8 +589,6 @@ static void rs_throttle(struct tty_struct * tty); static void rs_wait_until_sent(struct tty_struct *tty, int timeout); static int rs_write(struct tty_struct * tty, int from_user, const unsigned char *buf, int count); -extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user, - const unsigned char *buf, int count); #ifdef CONFIG_ETRAX_RS485 static int e100_write_rs485(struct tty_struct * tty, int from_user, const unsigned char *buf, int count); @@ -1538,8 +1534,7 @@ e100_enable_rxdma_irq(struct e100_serial *info) /* the tx DMA uses only dma_descr interrupt */ -static _INLINE_ void -e100_disable_txdma_irq(struct e100_serial *info) +static void e100_disable_txdma_irq(struct e100_serial *info) { #ifdef SERIAL_DEBUG_INTR printk("txdma_irq(%d): 0\n",info->line); @@ -1548,8 +1543,7 @@ e100_disable_txdma_irq(struct e100_serial *info) *R_IRQ_MASK2_CLR = info->irq; } -static _INLINE_ void -e100_enable_txdma_irq(struct e100_serial *info) +static void e100_enable_txdma_irq(struct e100_serial *info) { #ifdef SERIAL_DEBUG_INTR printk("txdma_irq(%d): 1\n",info->line); @@ -1558,8 +1552,7 @@ e100_enable_txdma_irq(struct e100_serial *info) *R_IRQ_MASK2_SET = info->irq; } -static _INLINE_ void -e100_disable_txdma_channel(struct e100_serial *info) +static void e100_disable_txdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1599,8 +1592,7 @@ e100_disable_txdma_channel(struct e100_serial *info) } -static _INLINE_ void -e100_enable_txdma_channel(struct e100_serial *info) +static void e100_enable_txdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1625,8 +1617,7 @@ e100_enable_txdma_channel(struct e100_serial *info) restore_flags(flags); } -static _INLINE_ void -e100_disable_rxdma_channel(struct e100_serial *info) +static void e100_disable_rxdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1665,8 +1656,7 @@ e100_disable_rxdma_channel(struct e100_serial *info) } -static _INLINE_ void -e100_enable_rxdma_channel(struct e100_serial *info) +static void e100_enable_rxdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1913,9 +1903,7 @@ rs_start(struct tty_struct *tty) * This routine is used by the interrupt handler to schedule * processing in the software interrupt portion of the driver. */ -static _INLINE_ void -rs_sched_event(struct e100_serial *info, - int event) +static void rs_sched_event(struct e100_serial *info, int event) { if (info->event & (1 << event)) return; @@ -2155,8 +2143,9 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl return 1; } -extern _INLINE_ unsigned int -handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl) +static unsigned int handle_descr_data(struct e100_serial *info, + struct etrax_dma_descr *descr, + unsigned int recvl) { struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; @@ -2182,8 +2171,7 @@ handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsig return recvl; } -static _INLINE_ unsigned int -handle_all_descr_data(struct e100_serial *info) +static unsigned int handle_all_descr_data(struct e100_serial *info) { struct etrax_dma_descr *descr; unsigned int recvl; @@ -2230,8 +2218,7 @@ handle_all_descr_data(struct e100_serial *info) return ret; } -static _INLINE_ void -receive_chars_dma(struct e100_serial *info) +static void receive_chars_dma(struct e100_serial *info) { struct tty_struct *tty; unsigned char rstat; @@ -2292,8 +2279,7 @@ receive_chars_dma(struct e100_serial *info) *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); } -static _INLINE_ int -start_recv_dma(struct e100_serial *info) +static int start_recv_dma(struct e100_serial *info) { struct etrax_dma_descr *descr = info->rec_descr; struct etrax_recv_buffer *buffer; @@ -2348,11 +2334,6 @@ start_receive(struct e100_serial *info) } -static _INLINE_ void -status_handle(struct e100_serial *info, unsigned short status) -{ -} - /* the bits in the MASK2 register are laid out like this: DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR where I is the input channel and O is the output channel for the port. @@ -2454,8 +2435,7 @@ rec_interrupt(int irq, void *dev_id, struct pt_regs * regs) return IRQ_RETVAL(handled); } /* rec_interrupt */ -static _INLINE_ int -force_eop_if_needed(struct e100_serial *info) +static int force_eop_if_needed(struct e100_serial *info) { /* We check data_avail bit to determine if data has * arrived since last time @@ -2499,8 +2479,7 @@ force_eop_if_needed(struct e100_serial *info) return 1; } -extern _INLINE_ void -flush_to_flip_buffer(struct e100_serial *info) +static void flush_to_flip_buffer(struct e100_serial *info) { struct tty_struct *tty; struct etrax_recv_buffer *buffer; @@ -2611,8 +2590,7 @@ flush_to_flip_buffer(struct e100_serial *info) tty_flip_buffer_push(tty); } -static _INLINE_ void -check_flush_timeout(struct e100_serial *info) +static void check_flush_timeout(struct e100_serial *info) { /* Flip what we've got (if we can) */ flush_to_flip_buffer(info); @@ -2741,7 +2719,7 @@ TODO: The break will be delayed until an F or V character is received. */ -extern _INLINE_ +static struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) { unsigned long data_read; @@ -2875,8 +2853,7 @@ more_data: return info; } -extern _INLINE_ -struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) +static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) { unsigned char rstat; @@ -2995,7 +2972,7 @@ struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) return info; } /* handle_ser_rx_interrupt */ -extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info) +static void handle_ser_tx_interrupt(struct e100_serial *info) { unsigned long flags; @@ -3621,9 +3598,8 @@ rs_flush_chars(struct tty_struct *tty) restore_flags(flags); } -extern _INLINE_ int -rs_raw_write(struct tty_struct * tty, int from_user, - const unsigned char *buf, int count) +static int rs_raw_write(struct tty_struct * tty, int from_user, + const unsigned char *buf, int count) { int c, ret = 0; struct e100_serial *info = (struct e100_serial *)tty->driver_data; @@ -4710,7 +4686,7 @@ rs_open(struct tty_struct *tty, struct file * filp) * /proc fs routines.... */ -extern _INLINE_ int line_info(char *buf, struct e100_serial *info) +static int line_info(char *buf, struct e100_serial *info) { char stat_buf[30]; int ret; diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index ba5541de673b..bf71bad5c34f 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -674,11 +674,12 @@ static void dz_reset(struct dz_port *dport) } #ifdef CONFIG_SERIAL_DZ_CONSOLE -static void dz_console_put_char(struct dz_port *dport, unsigned char ch) +static void dz_console_putchar(struct uart_port *port, int ch) { + struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; int loops = 2500; - unsigned short tmp = ch; + unsigned short tmp = (unsigned char)ch; /* this code sends stuff out to serial device - spinning its wheels and waiting. */ @@ -694,6 +695,7 @@ static void dz_console_put_char(struct dz_port *dport, unsigned char ch) spin_unlock_irqrestore(&dport->port.lock, flags); } + /* * ------------------------------------------------------------------- * dz_console_print () @@ -710,11 +712,7 @@ static void dz_console_print(struct console *cons, #ifdef DEBUG_DZ prom_printf((char *) str); #endif - while (count--) { - if (*str == '\n') - dz_console_put_char(dport, '\r'); - dz_console_put_char(dport, *str++); - } + uart_console_write(&dport->port, str, count, dz_console_putchar); } static int __init dz_console_setup(struct console *co, char *options) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 4d53fb5ca87b..c3b7a6673e9c 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -743,6 +743,13 @@ static void __init imx_init_ports(void) } #ifdef CONFIG_SERIAL_IMX_CONSOLE +static void imx_console_putchar(struct uart_port *port, int ch) +{ + struct imx_port *sport = (struct imx_port *)port; + while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) + barrier(); + URTX0((u32)sport->port.membase) = ch; +} /* * Interrupts are disabled on entering @@ -751,7 +758,7 @@ static void imx_console_write(struct console *co, const char *s, unsigned int count) { struct imx_port *sport = &imx_ports[co->index]; - unsigned int old_ucr1, old_ucr2, i; + unsigned int old_ucr1, old_ucr2; /* * First, save UCR1/2 and then disable interrupts @@ -764,22 +771,7 @@ imx_console_write(struct console *co, const char *s, unsigned int count) & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN; - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - - while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) - barrier(); - - URTX0((u32)sport->port.membase) = s[i]; - - if (s[i] == '\n') { - while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) - barrier(); - URTX0((u32)sport->port.membase) = '\r'; - } - } + uart_console_write(&sport->port, s, count, imx_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index f3763d2ccb86..c620209d7b9a 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. */ @@ -323,9 +323,12 @@ static unsigned int Num_of_ioc4_cards; #define IOC4_FIFO_CHARS 255 /* Device name we're using */ -#define DEVICE_NAME "ttyIOC" -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR 50 +#define DEVICE_NAME_RS232 "ttyIOC" +#define DEVICE_NAME_RS422 "ttyAIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR_RS232 50 +#define DEVICE_MINOR_RS422 84 + /* register offsets */ #define IOC4_SERIAL_OFFSET 0x300 @@ -341,10 +344,8 @@ static unsigned int Num_of_ioc4_cards; #define MAX_BAUD_SUPPORTED 115200 /* protocol types supported */ -enum sio_proto { - PROTO_RS232, - PROTO_RS422 -}; +#define PROTO_RS232 3 +#define PROTO_RS422 7 /* Notification types */ #define N_DATA_READY 0x01 @@ -395,11 +396,17 @@ enum sio_proto { /* * This is the entry saved by the driver - one per card */ + +#define UART_PORT_MIN 0 +#define UART_PORT_RS232 UART_PORT_MIN +#define UART_PORT_RS422 1 +#define UART_PORT_COUNT 2 /* one for each mode */ + struct ioc4_control { int ic_irq; struct { - /* uart ports are allocated here */ - struct uart_port icp_uart_port; + /* uart ports are allocated here - 1 for rs232, 1 for rs422 */ + struct uart_port icp_uart_port[UART_PORT_COUNT]; /* Handy reference material */ struct ioc4_port *icp_port; } ic_port[IOC4_NUM_SERIAL_PORTS]; @@ -443,7 +450,9 @@ struct ioc4_soft { /* Local port info for each IOC4 serial ports */ struct ioc4_port { - struct uart_port *ip_port; + struct uart_port *ip_port; /* current active port ptr */ + /* Ptrs for all ports */ + struct uart_port *ip_all_ports[UART_PORT_COUNT]; /* Back ptrs for this port */ struct ioc4_control *ip_control; struct pci_dev *ip_pdev; @@ -502,6 +511,9 @@ struct ioc4_port { #define DCD_ON 0x02 #define LOWAT_WRITTEN 0x04 #define READ_ABORTED 0x08 +#define PORT_ACTIVE 0x10 +#define PORT_INACTIVE 0 /* This is the value when "off" */ + /* Since each port has different register offsets and bitmasks * for everything, we'll store those that we need in tables so we @@ -623,6 +635,23 @@ struct ring_buffer { static void receive_chars(struct uart_port *); static void handle_intr(void *arg, uint32_t sio_ir); +/* + * port_is_active - determines if this port is currently active + * @port: ptr to soft struct for this port + * @uart_port: uart port to test for + */ +static inline int port_is_active(struct ioc4_port *port, + struct uart_port *uart_port) +{ + if (port) { + if ((port->ip_flags & PORT_ACTIVE) + && (port->ip_port == uart_port)) + return 1; + } + return 0; +} + + /** * write_ireg - write the interrupt regs * @ioc4_soft: ptr to soft struct for this port @@ -708,19 +737,33 @@ static int set_baud(struct ioc4_port *port, int baud) /** * get_ioc4_port - given a uart port, return the control structure * @port: uart port + * @set: set this port as current */ -static struct ioc4_port *get_ioc4_port(struct uart_port *the_port) +static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set) { struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev); struct ioc4_control *control = idd->idd_serial_data; - int ii; + struct ioc4_port *port; + int port_num, port_type; if (control) { - for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) { - if (!control->ic_port[ii].icp_port) + for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; + port_num++ ) { + port = control->ic_port[port_num].icp_port; + if (!port) continue; - if (the_port == control->ic_port[ii].icp_port->ip_port) - return control->ic_port[ii].icp_port; + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + if (the_port == port->ip_all_ports + [port_type]) { + /* set local copy */ + if (set) { + port->ip_port = the_port; + } + return port; + } + } } } return NULL; @@ -946,6 +989,7 @@ intr_connect(struct ioc4_soft *soft, int type, * @arg: handler arg * @regs: registers */ + static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) { struct ioc4_soft *soft; @@ -953,7 +997,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) int xx, num_intrs = 0; int intr_type; int handled = 0; - struct ioc4_intr_info *ii; + struct ioc4_intr_info *intr_info; soft = arg; for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { @@ -966,13 +1010,13 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) * which interrupt bits are set. */ for (xx = 0; xx < num_intrs; xx++) { - ii = &soft->is_intr_type[intr_type].is_intr_info[xx]; - if ((this_mir = this_ir & ii->sd_bits)) { + intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx]; + if ((this_mir = this_ir & intr_info->sd_bits)) { /* Disable owned interrupts, call handler */ handled++; - write_ireg(soft, ii->sd_bits, IOC4_W_IEC, + write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC, intr_type); - ii->sd_intr(ii->sd_info, this_mir); + intr_info->sd_intr(intr_info->sd_info, this_mir); this_ir &= ~this_mir; } } @@ -980,7 +1024,6 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) #ifdef DEBUG_INTERRUPTS { struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; - spinlock_t *lp = &soft->is_ir_lock; unsigned long flag; spin_lock_irqsave(&soft->is_ir_lock, flag); @@ -1177,7 +1220,7 @@ static inline int local_open(struct ioc4_port *port) { int spiniter = 0; - port->ip_flags = 0; + port->ip_flags = PORT_ACTIVE; /* Pause the DMA interface if necessary */ if (port->ip_sscr & IOC4_SSCR_DMA_EN) { @@ -1187,6 +1230,7 @@ static inline int local_open(struct ioc4_port *port) & IOC4_SSCR_PAUSE_STATE) == 0) { spiniter++; if (spiniter > MAXITER) { + port->ip_flags = PORT_INACTIVE; return -1; } } @@ -1506,14 +1550,13 @@ static int set_notification(struct ioc4_port *port, int mask, int set_on) /** * set_mcr - set the master control reg * @the_port: port to use - * @set: set ? * @mask1: mcr mask * @mask2: shadow mask */ -static inline int set_mcr(struct uart_port *the_port, int set, +static inline int set_mcr(struct uart_port *the_port, int mask1, int mask2) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); uint32_t shadow; int spiniter = 0; char mcr; @@ -1536,13 +1579,9 @@ static inline int set_mcr(struct uart_port *the_port, int set, mcr = (shadow & 0xff000000) >> 24; /* Set new value */ - if (set) { - mcr |= mask1; - shadow |= mask2; - } else { - mcr &= ~mask1; - shadow &= ~mask2; - } + mcr |= mask1; + shadow |= mask2; + writeb(mcr, &port->ip_uart_regs->i4u_mcr); writel(shadow, &port->ip_serial_regs->shadow); @@ -1558,7 +1597,7 @@ static inline int set_mcr(struct uart_port *the_port, int set, * @port: port to use * @proto: protocol to use */ -static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto) +static int ioc4_set_proto(struct ioc4_port *port, int proto) { struct hooks *hooks = port->ip_hooks; @@ -1589,7 +1628,7 @@ static void transmit_chars(struct uart_port *the_port) int result; char *start; struct tty_struct *tty; - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); struct uart_info *info; if (!the_port) @@ -1645,7 +1684,7 @@ static void ioc4_change_speed(struct uart_port *the_port, struct termios *new_termios, struct termios *old_termios) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); int baud, bits; unsigned cflag; int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; @@ -1752,7 +1791,7 @@ static inline int ic4_startup_local(struct uart_port *the_port) if (!the_port) return -1; - port = get_ioc4_port(the_port); + port = get_ioc4_port(the_port, 0); if (!port) return -1; @@ -1760,6 +1799,9 @@ static inline int ic4_startup_local(struct uart_port *the_port) local_open(port); + /* set the protocol - mapbase has the port type */ + ioc4_set_proto(port, the_port->mapbase); + /* set the speed of the serial port */ ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0); @@ -1768,17 +1810,17 @@ static inline int ic4_startup_local(struct uart_port *the_port) /* * ioc4_cb_output_lowat - called when the output low water mark is hit - * @port: port to output + * @the_port: port to output */ -static void ioc4_cb_output_lowat(struct ioc4_port *port) +static void ioc4_cb_output_lowat(struct uart_port *the_port) { unsigned long pflags; /* ip_lock is set on the call here */ - if (port->ip_port) { - spin_lock_irqsave(&port->ip_port->lock, pflags); - transmit_chars(port->ip_port); - spin_unlock_irqrestore(&port->ip_port->lock, pflags); + if (the_port) { + spin_lock_irqsave(&the_port->lock, pflags); + transmit_chars(the_port); + spin_unlock_irqrestore(&the_port->lock, pflags); } } @@ -1923,7 +1965,7 @@ static void handle_intr(void *arg, uint32_t sio_ir) &port->ip_mem->sio_ir.raw); if (port->ip_notify & N_OUTPUT_LOWAT) - ioc4_cb_output_lowat(port); + ioc4_cb_output_lowat(port->ip_port); } /* Handle tx_mt. Must come after tx_explicit. */ @@ -1936,7 +1978,7 @@ static void handle_intr(void *arg, uint32_t sio_ir) * So send the notification now. */ if (port->ip_notify & N_OUTPUT_LOWAT) { - ioc4_cb_output_lowat(port); + ioc4_cb_output_lowat(port->ip_port); /* We need to reload the sio_ir since the lowat * call may have caused another write to occur, @@ -2023,7 +2065,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf, int len) { int prod_ptr, cons_ptr, total; - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); struct ring *inring; struct ring_entry *entry; struct hooks *hooks = port->ip_hooks; @@ -2301,7 +2343,6 @@ static void receive_chars(struct uart_port *the_port) int read_count, request_count = IOC4_MAX_CHARS; struct uart_icount *icount; struct uart_info *info = the_port->info; - int flip = 0; unsigned long pflags; /* Make sure all the pointers are "good" ones */ @@ -2313,7 +2354,7 @@ static void receive_chars(struct uart_port *the_port) spin_lock_irqsave(&the_port->lock, pflags); tty = info->tty; - request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS - 2); + request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS); if (request_count > 0) { icount = &the_port->icount; @@ -2326,8 +2367,7 @@ static void receive_chars(struct uart_port *the_port) spin_unlock_irqrestore(&the_port->lock, pflags); - if (flip) - tty_flip_buffer_push(tty); + tty_flip_buffer_push(tty); } /** @@ -2337,17 +2377,27 @@ static void receive_chars(struct uart_port *the_port) */ static const char *ic4_type(struct uart_port *the_port) { - return "SGI IOC4 Serial"; + if (the_port->mapbase == PROTO_RS232) + return "SGI IOC4 Serial [rs232]"; + else + return "SGI IOC4 Serial [rs422]"; } /** - * ic4_tx_empty - Is the transmitter empty? We pretend we're always empty - * @port: Port to operate on (we ignore since we always return 1) + * ic4_tx_empty - Is the transmitter empty? + * @port: Port to operate on * */ static unsigned int ic4_tx_empty(struct uart_port *the_port) { - return 1; + struct ioc4_port *port = get_ioc4_port(the_port, 0); + unsigned int ret = 0; + + if (port_is_active(port, the_port)) { + if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT) + ret = TIOCSER_TEMT; + } + return ret; } /** @@ -2357,6 +2407,10 @@ static unsigned int ic4_tx_empty(struct uart_port *the_port) */ static void ic4_stop_tx(struct uart_port *the_port) { + struct ioc4_port *port = get_ioc4_port(the_port, 0); + + if (port_is_active(port, the_port)) + set_notification(port, N_OUTPUT_LOWAT, 0); } /** @@ -2379,11 +2433,12 @@ static void ic4_shutdown(struct uart_port *the_port) struct ioc4_port *port; struct uart_info *info; - port = get_ioc4_port(the_port); + port = get_ioc4_port(the_port, 0); if (!port) return; info = the_port->info; + port->ip_port = NULL; wake_up_interruptible(&info->delta_msr_wait); @@ -2392,6 +2447,7 @@ static void ic4_shutdown(struct uart_port *the_port) spin_lock_irqsave(&the_port->lock, port_flags); set_notification(port, N_ALL, 0); + port->ip_flags = PORT_INACTIVE; spin_unlock_irqrestore(&the_port->lock, port_flags); } @@ -2404,6 +2460,11 @@ static void ic4_shutdown(struct uart_port *the_port) static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) { unsigned char mcr = 0; + struct ioc4_port *port; + + port = get_ioc4_port(the_port, 0); + if (!port_is_active(port, the_port)) + return; if (mctrl & TIOCM_RTS) mcr |= UART_MCR_RTS; @@ -2416,7 +2477,7 @@ static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR); + set_mcr(the_port, mcr, IOC4_SHADOW_DTR); } /** @@ -2426,11 +2487,11 @@ static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) */ static unsigned int ic4_get_mctrl(struct uart_port *the_port) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); uint32_t shadow; unsigned int ret = 0; - if (!port) + if (!port_is_active(port, the_port)) return 0; shadow = readl(&port->ip_serial_regs->shadow); @@ -2450,9 +2511,9 @@ static unsigned int ic4_get_mctrl(struct uart_port *the_port) */ static void ic4_start_tx(struct uart_port *the_port) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); - if (port) { + if (port_is_active(port, the_port)) { set_notification(port, N_OUTPUT_LOWAT, 1); enable_intrs(port, port->ip_hooks->intr_tx_mt); } @@ -2469,7 +2530,7 @@ static void ic4_break_ctl(struct uart_port *the_port, int break_state) } /** - * ic4_startup - Start up the serial port - always return 0 (We're always on) + * ic4_startup - Start up the serial port * @port: Port to operate on * */ @@ -2481,17 +2542,16 @@ static int ic4_startup(struct uart_port *the_port) struct uart_info *info; unsigned long port_flags; - if (!the_port) { + if (!the_port) return -ENODEV; - } - port = get_ioc4_port(the_port); - if (!port) { + port = get_ioc4_port(the_port, 1); + if (!port) return -ENODEV; - } info = the_port->info; control = port->ip_control; if (!control) { + port->ip_port = NULL; return -ENODEV; } @@ -2553,28 +2613,104 @@ static struct uart_ops ioc4_ops = { * Boot-time initialization code */ -static struct uart_driver ioc4_uart = { +static struct uart_driver ioc4_uart_rs232 = { .owner = THIS_MODULE, - .driver_name = "ioc4_serial", - .dev_name = DEVICE_NAME, + .driver_name = "ioc4_serial_rs232", + .dev_name = DEVICE_NAME_RS232, .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR, + .minor = DEVICE_MINOR_RS232, .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, }; +static struct uart_driver ioc4_uart_rs422 = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial_rs422", + .dev_name = DEVICE_NAME_RS422, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR_RS422, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + + /** - * ioc4_serial_core_attach - register with serial core + * ioc4_serial_remove_one - detach function + * + * @idd: IOC4 master module data for this IOC4 + */ + +static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) +{ + int port_num, port_type; + struct ioc4_control *control; + struct uart_port *the_port; + struct ioc4_port *port; + struct ioc4_soft *soft; + + control = idd->idd_serial_data; + + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type]; + if (the_port) { + switch (port_type) { + case UART_PORT_RS422: + uart_remove_one_port(&ioc4_uart_rs422, + the_port); + break; + default: + case UART_PORT_RS232: + uart_remove_one_port(&ioc4_uart_rs232, + the_port); + break; + } + } + } + port = control->ic_port[port_num].icp_port; + /* we allocate in pairs */ + if (!(port_num & 1) && port) { + pci_free_consistent(port->ip_pdev, + TOTAL_RING_BUF_SIZE, + port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + } + } + soft = control->ic_soft; + if (soft) { + free_irq(control->ic_irq, soft); + if (soft->is_ioc4_serial_addr) { + release_region((unsigned long) + soft->is_ioc4_serial_addr, + sizeof(struct ioc4_serial)); + } + kfree(soft); + } + kfree(control); + idd->idd_serial_data = NULL; + + return 0; +} + + +/** + * ioc4_serial_core_attach_rs232 - register with serial core * This is done during pci probing * @pdev: handle for this card */ static inline int -ioc4_serial_core_attach(struct pci_dev *pdev) +ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) { struct ioc4_port *port; struct uart_port *the_port; struct ioc4_driver_data *idd = pci_get_drvdata(pdev); struct ioc4_control *control = idd->idd_serial_data; - int ii; + int port_num; + int port_type_idx; + struct uart_driver *u_driver; + DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", __FUNCTION__, pdev, (void *)control)); @@ -2582,28 +2718,36 @@ ioc4_serial_core_attach(struct pci_dev *pdev) if (!control) return -ENODEV; + port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232 + : UART_PORT_RS422; + + u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232 + : &ioc4_uart_rs422; + /* once around for each port on this card */ - for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { - the_port = &control->ic_port[ii].icp_uart_port; - port = control->ic_port[ii].icp_port; - port->ip_port = the_port; + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type_idx]; + port = control->ic_port[port_num].icp_port; + port->ip_all_ports[port_type_idx] = the_port; - DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n", + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", __FUNCTION__, (void *)the_port, - (void *)port)); + (void *)port, + port_type == PROTO_RS232 ? "rs232" : "rs422")); /* membase, iobase and mapbase just need to be non-0 */ the_port->membase = (unsigned char __iomem *)1; - the_port->iobase = (pdev->bus->number << 16) | ii; - the_port->line = (Num_of_ioc4_cards << 2) | ii; - the_port->mapbase = 1; + the_port->iobase = (pdev->bus->number << 16) | port_num; + the_port->line = (Num_of_ioc4_cards << 2) | port_num; + the_port->mapbase = port_type; the_port->type = PORT_16550A; the_port->fifosize = IOC4_FIFO_CHARS; the_port->ops = &ioc4_ops; the_port->irq = control->ic_irq; the_port->dev = &pdev->dev; spin_lock_init(&the_port->lock); - if (uart_add_one_port(&ioc4_uart, the_port) < 0) { + if (uart_add_one_port(u_driver, the_port) < 0) { printk(KERN_WARNING "%s: unable to add port %d bus %d\n", __FUNCTION__, the_port->line, pdev->bus->number); @@ -2612,8 +2756,6 @@ ioc4_serial_core_attach(struct pci_dev *pdev) ("IOC4 serial port %d irq = %d, bus %d\n", the_port->line, the_port->irq, pdev->bus->number)); } - /* all ports are rs232 for now */ - ioc4_set_proto(port, PROTO_RS232); } return 0; } @@ -2633,7 +2775,8 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) int ret = 0; - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id)); + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, + idd->idd_pci_id)); /* request serial registers */ tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; @@ -2655,11 +2798,11 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) goto out2; } DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", - __FUNCTION__, (void *)idd->idd_misc_regs, (void *)serial)); + __FUNCTION__, (void *)idd->idd_misc_regs, + (void *)serial)); /* Get memory for the new card */ - control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS, - GFP_KERNEL); + control = kmalloc(sizeof(struct ioc4_control), GFP_KERNEL); if (!control) { printk(KERN_WARNING "ioc4_attach_one" @@ -2704,7 +2847,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) /* Hook up interrupt handler */ if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ, - "sgi-ioc4serial", (void *)soft)) { + "sgi-ioc4serial", soft)) { control->ic_irq = idd->idd_pdev->irq; } else { printk(KERN_WARNING @@ -2715,16 +2858,21 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) if (ret) goto out4; - /* register port with the serial core */ + /* register port with the serial core - 1 rs232, 1 rs422 */ - if ((ret = ioc4_serial_core_attach(idd->idd_pdev))) + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232))) goto out4; + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422))) + goto out5; + Num_of_ioc4_cards++; return ret; /* error exits that give back resources */ +out5: + ioc4_serial_remove_one(idd); out4: kfree(soft); out3: @@ -2737,52 +2885,6 @@ out1: } -/** - * ioc4_serial_remove_one - detach function - * - * @idd: IOC4 master module data for this IOC4 - */ - -int ioc4_serial_remove_one(struct ioc4_driver_data *idd) -{ - int ii; - struct ioc4_control *control; - struct uart_port *the_port; - struct ioc4_port *port; - struct ioc4_soft *soft; - - control = idd->idd_serial_data; - - for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { - the_port = &control->ic_port[ii].icp_uart_port; - if (the_port) { - uart_remove_one_port(&ioc4_uart, the_port); - } - port = control->ic_port[ii].icp_port; - if (!(ii & 1) && port) { - pci_free_consistent(port->ip_pdev, - TOTAL_RING_BUF_SIZE, - (void *)port->ip_cpu_ringbuf, - port->ip_dma_ringbuf); - kfree(port); - } - } - soft = control->ic_soft; - if (soft) { - free_irq(control->ic_irq, (void *)soft); - if (soft->is_ioc4_serial_addr) { - release_region((unsigned long) - soft->is_ioc4_serial_addr, - sizeof(struct ioc4_serial)); - } - kfree(soft); - } - kfree(control); - idd->idd_serial_data = NULL; - - return 0; -} - static struct ioc4_submodule ioc4_serial_submodule = { .is_name = "IOC4_serial", .is_owner = THIS_MODULE, @@ -2798,9 +2900,15 @@ int ioc4_serial_init(void) int ret; /* register with serial core */ - if ((ret = uart_register_driver(&ioc4_uart)) < 0) { + if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register rs232 IOC4 serial driver\n", + __FUNCTION__); + return ret; + } + if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { printk(KERN_WARNING - "%s: Couldn't register IOC4 serial driver\n", + "%s: Couldn't register rs422 IOC4 serial driver\n", __FUNCTION__); return ret; } @@ -2812,7 +2920,8 @@ int ioc4_serial_init(void) static void __devexit ioc4_serial_exit(void) { ioc4_unregister_submodule(&ioc4_serial_submodule); - uart_unregister_driver(&ioc4_uart); + uart_unregister_driver(&ioc4_uart_rs232); + uart_unregister_driver(&ioc4_uart_rs422); } module_init(ioc4_serial_init); diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 419dd3cd7862..651772474ac1 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -420,10 +420,8 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, if (up->port.info == NULL) goto ack_tx_int; xmit = &up->port.info->xmit; - if (uart_circ_empty(xmit)) { - uart_write_wakeup(&up->port); + if (uart_circ_empty(xmit)) goto ack_tx_int; - } if (uart_tx_stopped(&up->port)) goto ack_tx_int; @@ -969,8 +967,9 @@ static struct zilog_layout * __init get_zs(int chip) #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ #ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE -static void ip22zilog_put_char(struct zilog_channel *channel, unsigned char ch) +static void ip22zilog_put_char(struct uart_port *port, int ch) { + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); int loops = ZS_PUT_CHAR_MAX_DELAY; /* This is a timed polling loop so do not switch the explicit @@ -994,16 +993,10 @@ static void ip22zilog_console_write(struct console *con, const char *s, unsigned int count) { struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); unsigned long flags; - int i; spin_lock_irqsave(&up->port.lock, flags); - for (i = 0; i < count; i++, s++) { - ip22zilog_put_char(channel, *s); - if (*s == 10) - ip22zilog_put_char(channel, 13); - } + uart_console_write(&up->port, s, count, ip22zilog_put_char); udelay(2); spin_unlock_irqrestore(&up->port.lock, flags); } diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index 242a04104393..e9c10c0a30fc 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -248,17 +248,17 @@ static void sio_error(int *status) #endif /* CONFIG_SERIAL_M32R_PLDSIO */ -static _INLINE_ unsigned int sio_in(struct uart_sio_port *up, int offset) +static unsigned int sio_in(struct uart_sio_port *up, int offset) { return __sio_in(up->port.iobase + offset); } -static _INLINE_ void sio_out(struct uart_sio_port *up, int offset, int value) +static void sio_out(struct uart_sio_port *up, int offset, int value) { __sio_out(value, up->port.iobase + offset); } -static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset) +static unsigned int serial_in(struct uart_sio_port *up, int offset) { if (!offset) return 0; @@ -266,8 +266,7 @@ static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset) return __sio_in(offset); } -static _INLINE_ void -serial_out(struct uart_sio_port *up, int offset, int value) +static void serial_out(struct uart_sio_port *up, int offset, int value) { if (!offset) return; @@ -326,8 +325,8 @@ static void m32r_sio_enable_ms(struct uart_port *port) serial_out(up, UART_IER, up->ier); } -static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status, - struct pt_regs *regs) +static void receive_chars(struct uart_sio_port *up, int *status, + struct pt_regs *regs) { struct tty_struct *tty = up->port.info->tty; unsigned char ch; @@ -400,7 +399,7 @@ static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status, tty_flip_buffer_push(tty); } -static _INLINE_ void transmit_chars(struct uart_sio_port *up) +static void transmit_chars(struct uart_sio_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; @@ -1039,6 +1038,14 @@ static inline void wait_for_xmitr(struct uart_sio_port *up) } } +static void m32r_sio_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + wait_for_xmitr(up); + sio_out(up, SIOTXB, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1058,23 +1065,7 @@ static void m32r_sio_console_write(struct console *co, const char *s, ier = sio_in(up, SIOTRCR); sio_out(up, SIOTRCR, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - sio_out(up, SIOTXB, *s); - - if (*s == 10) { - wait_for_xmitr(up); - sio_out(up, SIOTXB, 13); - } - } + uart_console_write(&up->port, s, count, m32r_sio_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 61dd17d7bace..6459edc7f5c5 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -40,7 +40,7 @@ * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly * fpr the console code : without this 1:1 mapping, at early boot time, when we - * are parsing the kernel args console=ttyPSC?, we wouldn't know wich PSC it + * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it * will be mapped to. */ @@ -603,15 +603,14 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count) udelay(1); /* Write all the chars */ - for ( i=0 ; i<count ; i++ ) { - - /* Send the char */ - out_8(&psc->mpc52xx_psc_buffer_8, *s); - + for (i = 0; i < count; i++, s++) { /* Line return handling */ - if ( *s++ == '\n' ) + if (*s == '\n') out_8(&psc->mpc52xx_psc_buffer_8, '\r'); + /* Send the char */ + out_8(&psc->mpc52xx_psc_buffer_8, *s); + /* Wait the TX buffer to be empty */ j = 20000; /* Maximum wait */ while (!(in_be16(&psc->mpc52xx_psc_status) & diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index 0ca83ac31d07..94681922ea0a 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -1,6 +1,4 @@ /* - * drivers/serial/mpsc.c - * * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, * GT64260, MV64340, MV64360, GT96100, ... ). * @@ -52,9 +50,263 @@ * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. */ +#include <linux/config.h> + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/mv643xx.h> #include <linux/platform_device.h> -#include "mpsc.h" +#include <asm/io.h> +#include <asm/irq.h> + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#define MPSC_NUM_CTLRS 2 + +/* + * Descriptors and buffers must be cache line aligned. + * Buffers lengths must be multiple of cache line size. + * Number of Tx & Rx descriptors must be powers of 2. + */ +#define MPSC_RXR_ENTRIES 32 +#define MPSC_RXRE_SIZE dma_get_cache_alignment() +#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) +#define MPSC_RXBE_SIZE dma_get_cache_alignment() +#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) + +#define MPSC_TXR_ENTRIES 32 +#define MPSC_TXRE_SIZE dma_get_cache_alignment() +#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) +#define MPSC_TXBE_SIZE dma_get_cache_alignment() +#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) + +#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \ + MPSC_TXR_SIZE + MPSC_TXB_SIZE + \ + dma_get_cache_alignment() /* for alignment */) + +/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ +struct mpsc_rx_desc { + u16 bufsize; + u16 bytecnt; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +struct mpsc_tx_desc { + u16 bytecnt; + u16 shadow; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +/* + * Some regs that have the erratum that you can't read them are are shared + * between the two MPSC controllers. This struct contains those shared regs. + */ +struct mpsc_shared_regs { + phys_addr_t mpsc_routing_base_p; + phys_addr_t sdma_intr_base_p; + + void __iomem *mpsc_routing_base; + void __iomem *sdma_intr_base; + + u32 MPSC_MRR_m; + u32 MPSC_RCRR_m; + u32 MPSC_TCRR_m; + u32 SDMA_INTR_CAUSE_m; + u32 SDMA_INTR_MASK_m; +}; + +/* The main driver data structure */ +struct mpsc_port_info { + struct uart_port port; /* Overlay uart_port structure */ + + /* Internal driver state for this ctlr */ + u8 ready; + u8 rcv_data; + tcflag_t c_iflag; /* save termios->c_iflag */ + tcflag_t c_cflag; /* save termios->c_cflag */ + + /* Info passed in from platform */ + u8 mirror_regs; /* Need to mirror regs? */ + u8 cache_mgmt; /* Need manual cache mgmt? */ + u8 brg_can_tune; /* BRG has baud tuning? */ + u32 brg_clk_src; + u16 mpsc_max_idle; + int default_baud; + int default_bits; + int default_parity; + int default_flow; + + /* Physical addresses of various blocks of registers (from platform) */ + phys_addr_t mpsc_base_p; + phys_addr_t sdma_base_p; + phys_addr_t brg_base_p; + + /* Virtual addresses of various blocks of registers (from platform) */ + void __iomem *mpsc_base; + void __iomem *sdma_base; + void __iomem *brg_base; + + /* Descriptor ring and buffer allocations */ + void *dma_region; + dma_addr_t dma_region_p; + + dma_addr_t rxr; /* Rx descriptor ring */ + dma_addr_t rxr_p; /* Phys addr of rxr */ + u8 *rxb; /* Rx Ring I/O buf */ + u8 *rxb_p; /* Phys addr of rxb */ + u32 rxr_posn; /* First desc w/ Rx data */ + + dma_addr_t txr; /* Tx descriptor ring */ + dma_addr_t txr_p; /* Phys addr of txr */ + u8 *txb; /* Tx Ring I/O buf */ + u8 *txb_p; /* Phys addr of txb */ + int txr_head; /* Where new data goes */ + int txr_tail; /* Where sent data comes off */ + + /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ + u32 MPSC_MPCR_m; + u32 MPSC_CHR_1_m; + u32 MPSC_CHR_2_m; + u32 MPSC_CHR_10_m; + u32 BRG_BCR_m; + struct mpsc_shared_regs *shared_regs; +}; + +/* Hooks to platform-specific code */ +int mpsc_platform_register_driver(void); +void mpsc_platform_unregister_driver(void); + +/* Hooks back in to mpsc common to be called by platform-specific code */ +struct mpsc_port_info *mpsc_device_probe(int index); +struct mpsc_port_info *mpsc_device_remove(int index); + +/* Main MPSC Configuration Register Offsets */ +#define MPSC_MMCRL 0x0000 +#define MPSC_MMCRH 0x0004 +#define MPSC_MPCR 0x0008 +#define MPSC_CHR_1 0x000c +#define MPSC_CHR_2 0x0010 +#define MPSC_CHR_3 0x0014 +#define MPSC_CHR_4 0x0018 +#define MPSC_CHR_5 0x001c +#define MPSC_CHR_6 0x0020 +#define MPSC_CHR_7 0x0024 +#define MPSC_CHR_8 0x0028 +#define MPSC_CHR_9 0x002c +#define MPSC_CHR_10 0x0030 +#define MPSC_CHR_11 0x0034 + +#define MPSC_MPCR_FRZ (1 << 9) +#define MPSC_MPCR_CL_5 0 +#define MPSC_MPCR_CL_6 1 +#define MPSC_MPCR_CL_7 2 +#define MPSC_MPCR_CL_8 3 +#define MPSC_MPCR_SBL_1 0 +#define MPSC_MPCR_SBL_2 1 + +#define MPSC_CHR_2_TEV (1<<1) +#define MPSC_CHR_2_TA (1<<7) +#define MPSC_CHR_2_TTCS (1<<9) +#define MPSC_CHR_2_REV (1<<17) +#define MPSC_CHR_2_RA (1<<23) +#define MPSC_CHR_2_CRD (1<<25) +#define MPSC_CHR_2_EH (1<<31) +#define MPSC_CHR_2_PAR_ODD 0 +#define MPSC_CHR_2_PAR_SPACE 1 +#define MPSC_CHR_2_PAR_EVEN 2 +#define MPSC_CHR_2_PAR_MARK 3 + +/* MPSC Signal Routing */ +#define MPSC_MRR 0x0000 +#define MPSC_RCRR 0x0004 +#define MPSC_TCRR 0x0008 + +/* Serial DMA Controller Interface Registers */ +#define SDMA_SDC 0x0000 +#define SDMA_SDCM 0x0008 +#define SDMA_RX_DESC 0x0800 +#define SDMA_RX_BUF_PTR 0x0808 +#define SDMA_SCRDP 0x0810 +#define SDMA_TX_DESC 0x0c00 +#define SDMA_SCTDP 0x0c10 +#define SDMA_SFTDP 0x0c14 + +#define SDMA_DESC_CMDSTAT_PE (1<<0) +#define SDMA_DESC_CMDSTAT_CDL (1<<1) +#define SDMA_DESC_CMDSTAT_FR (1<<3) +#define SDMA_DESC_CMDSTAT_OR (1<<6) +#define SDMA_DESC_CMDSTAT_BR (1<<9) +#define SDMA_DESC_CMDSTAT_MI (1<<10) +#define SDMA_DESC_CMDSTAT_A (1<<11) +#define SDMA_DESC_CMDSTAT_AM (1<<12) +#define SDMA_DESC_CMDSTAT_CT (1<<13) +#define SDMA_DESC_CMDSTAT_C (1<<14) +#define SDMA_DESC_CMDSTAT_ES (1<<15) +#define SDMA_DESC_CMDSTAT_L (1<<16) +#define SDMA_DESC_CMDSTAT_F (1<<17) +#define SDMA_DESC_CMDSTAT_P (1<<18) +#define SDMA_DESC_CMDSTAT_EI (1<<23) +#define SDMA_DESC_CMDSTAT_O (1<<31) + +#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \ + SDMA_DESC_CMDSTAT_EI) + +#define SDMA_SDC_RFT (1<<0) +#define SDMA_SDC_SFM (1<<1) +#define SDMA_SDC_BLMR (1<<6) +#define SDMA_SDC_BLMT (1<<7) +#define SDMA_SDC_POVR (1<<8) +#define SDMA_SDC_RIFB (1<<9) + +#define SDMA_SDCM_ERD (1<<7) +#define SDMA_SDCM_AR (1<<15) +#define SDMA_SDCM_STD (1<<16) +#define SDMA_SDCM_TXD (1<<23) +#define SDMA_SDCM_AT (1<<31) + +#define SDMA_0_CAUSE_RXBUF (1<<0) +#define SDMA_0_CAUSE_RXERR (1<<1) +#define SDMA_0_CAUSE_TXBUF (1<<2) +#define SDMA_0_CAUSE_TXEND (1<<3) +#define SDMA_1_CAUSE_RXBUF (1<<8) +#define SDMA_1_CAUSE_RXERR (1<<9) +#define SDMA_1_CAUSE_TXBUF (1<<10) +#define SDMA_1_CAUSE_TXEND (1<<11) + +#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \ + SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) +#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \ + SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) + +/* SDMA Interrupt registers */ +#define SDMA_INTR_CAUSE 0x0000 +#define SDMA_INTR_MASK 0x0080 + +/* Baud Rate Generator Interface Registers */ +#define BRG_BCR 0x0000 +#define BRG_BTR 0x0004 /* * Define how this driver is known to the outside (we've been assigned a @@ -1165,7 +1417,7 @@ mpsc_startup(struct uart_port *port) flag = SA_SHIRQ; if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, - "mpsc/sdma", pi)) + "mpsc-sdma", pi)) printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", pi->port.irq); diff --git a/drivers/serial/mpsc.h b/drivers/serial/mpsc.h deleted file mode 100644 index 678dbcf06c8f..000000000000 --- a/drivers/serial/mpsc.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * drivers/serial/mpsc.h - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __MPSC_H__ -#define __MPSC_H__ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/mv643xx.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#define MPSC_NUM_CTLRS 2 - -/* - * Descriptors and buffers must be cache line aligned. - * Buffers lengths must be multiple of cache line size. - * Number of Tx & Rx descriptors must be powers of 2. - */ -#define MPSC_RXR_ENTRIES 32 -#define MPSC_RXRE_SIZE dma_get_cache_alignment() -#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) -#define MPSC_RXBE_SIZE dma_get_cache_alignment() -#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) - -#define MPSC_TXR_ENTRIES 32 -#define MPSC_TXRE_SIZE dma_get_cache_alignment() -#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) -#define MPSC_TXBE_SIZE dma_get_cache_alignment() -#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) - -#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \ - MPSC_TXR_SIZE + MPSC_TXB_SIZE + \ - dma_get_cache_alignment() /* for alignment */) - -/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ -struct mpsc_rx_desc { - u16 bufsize; - u16 bytecnt; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -struct mpsc_tx_desc { - u16 bytecnt; - u16 shadow; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -/* - * Some regs that have the erratum that you can't read them are are shared - * between the two MPSC controllers. This struct contains those shared regs. - */ -struct mpsc_shared_regs { - phys_addr_t mpsc_routing_base_p; - phys_addr_t sdma_intr_base_p; - - void __iomem *mpsc_routing_base; - void __iomem *sdma_intr_base; - - u32 MPSC_MRR_m; - u32 MPSC_RCRR_m; - u32 MPSC_TCRR_m; - u32 SDMA_INTR_CAUSE_m; - u32 SDMA_INTR_MASK_m; -}; - -/* The main driver data structure */ -struct mpsc_port_info { - struct uart_port port; /* Overlay uart_port structure */ - - /* Internal driver state for this ctlr */ - u8 ready; - u8 rcv_data; - tcflag_t c_iflag; /* save termios->c_iflag */ - tcflag_t c_cflag; /* save termios->c_cflag */ - - /* Info passed in from platform */ - u8 mirror_regs; /* Need to mirror regs? */ - u8 cache_mgmt; /* Need manual cache mgmt? */ - u8 brg_can_tune; /* BRG has baud tuning? */ - u32 brg_clk_src; - u16 mpsc_max_idle; - int default_baud; - int default_bits; - int default_parity; - int default_flow; - - /* Physical addresses of various blocks of registers (from platform) */ - phys_addr_t mpsc_base_p; - phys_addr_t sdma_base_p; - phys_addr_t brg_base_p; - - /* Virtual addresses of various blocks of registers (from platform) */ - void __iomem *mpsc_base; - void __iomem *sdma_base; - void __iomem *brg_base; - - /* Descriptor ring and buffer allocations */ - void *dma_region; - dma_addr_t dma_region_p; - - dma_addr_t rxr; /* Rx descriptor ring */ - dma_addr_t rxr_p; /* Phys addr of rxr */ - u8 *rxb; /* Rx Ring I/O buf */ - u8 *rxb_p; /* Phys addr of rxb */ - u32 rxr_posn; /* First desc w/ Rx data */ - - dma_addr_t txr; /* Tx descriptor ring */ - dma_addr_t txr_p; /* Phys addr of txr */ - u8 *txb; /* Tx Ring I/O buf */ - u8 *txb_p; /* Phys addr of txb */ - int txr_head; /* Where new data goes */ - int txr_tail; /* Where sent data comes off */ - - /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ - u32 MPSC_MPCR_m; - u32 MPSC_CHR_1_m; - u32 MPSC_CHR_2_m; - u32 MPSC_CHR_10_m; - u32 BRG_BCR_m; - struct mpsc_shared_regs *shared_regs; -}; - -/* Hooks to platform-specific code */ -int mpsc_platform_register_driver(void); -void mpsc_platform_unregister_driver(void); - -/* Hooks back in to mpsc common to be called by platform-specific code */ -struct mpsc_port_info *mpsc_device_probe(int index); -struct mpsc_port_info *mpsc_device_remove(int index); - -/* - ***************************************************************************** - * - * Multi-Protocol Serial Controller Interface Registers - * - ***************************************************************************** - */ - -/* Main Configuratino Register Offsets */ -#define MPSC_MMCRL 0x0000 -#define MPSC_MMCRH 0x0004 -#define MPSC_MPCR 0x0008 -#define MPSC_CHR_1 0x000c -#define MPSC_CHR_2 0x0010 -#define MPSC_CHR_3 0x0014 -#define MPSC_CHR_4 0x0018 -#define MPSC_CHR_5 0x001c -#define MPSC_CHR_6 0x0020 -#define MPSC_CHR_7 0x0024 -#define MPSC_CHR_8 0x0028 -#define MPSC_CHR_9 0x002c -#define MPSC_CHR_10 0x0030 -#define MPSC_CHR_11 0x0034 - -#define MPSC_MPCR_FRZ (1 << 9) -#define MPSC_MPCR_CL_5 0 -#define MPSC_MPCR_CL_6 1 -#define MPSC_MPCR_CL_7 2 -#define MPSC_MPCR_CL_8 3 -#define MPSC_MPCR_SBL_1 0 -#define MPSC_MPCR_SBL_2 1 - -#define MPSC_CHR_2_TEV (1<<1) -#define MPSC_CHR_2_TA (1<<7) -#define MPSC_CHR_2_TTCS (1<<9) -#define MPSC_CHR_2_REV (1<<17) -#define MPSC_CHR_2_RA (1<<23) -#define MPSC_CHR_2_CRD (1<<25) -#define MPSC_CHR_2_EH (1<<31) -#define MPSC_CHR_2_PAR_ODD 0 -#define MPSC_CHR_2_PAR_SPACE 1 -#define MPSC_CHR_2_PAR_EVEN 2 -#define MPSC_CHR_2_PAR_MARK 3 - -/* MPSC Signal Routing */ -#define MPSC_MRR 0x0000 -#define MPSC_RCRR 0x0004 -#define MPSC_TCRR 0x0008 - -/* - ***************************************************************************** - * - * Serial DMA Controller Interface Registers - * - ***************************************************************************** - */ - -#define SDMA_SDC 0x0000 -#define SDMA_SDCM 0x0008 -#define SDMA_RX_DESC 0x0800 -#define SDMA_RX_BUF_PTR 0x0808 -#define SDMA_SCRDP 0x0810 -#define SDMA_TX_DESC 0x0c00 -#define SDMA_SCTDP 0x0c10 -#define SDMA_SFTDP 0x0c14 - -#define SDMA_DESC_CMDSTAT_PE (1<<0) -#define SDMA_DESC_CMDSTAT_CDL (1<<1) -#define SDMA_DESC_CMDSTAT_FR (1<<3) -#define SDMA_DESC_CMDSTAT_OR (1<<6) -#define SDMA_DESC_CMDSTAT_BR (1<<9) -#define SDMA_DESC_CMDSTAT_MI (1<<10) -#define SDMA_DESC_CMDSTAT_A (1<<11) -#define SDMA_DESC_CMDSTAT_AM (1<<12) -#define SDMA_DESC_CMDSTAT_CT (1<<13) -#define SDMA_DESC_CMDSTAT_C (1<<14) -#define SDMA_DESC_CMDSTAT_ES (1<<15) -#define SDMA_DESC_CMDSTAT_L (1<<16) -#define SDMA_DESC_CMDSTAT_F (1<<17) -#define SDMA_DESC_CMDSTAT_P (1<<18) -#define SDMA_DESC_CMDSTAT_EI (1<<23) -#define SDMA_DESC_CMDSTAT_O (1<<31) - -#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \ - SDMA_DESC_CMDSTAT_EI) - -#define SDMA_SDC_RFT (1<<0) -#define SDMA_SDC_SFM (1<<1) -#define SDMA_SDC_BLMR (1<<6) -#define SDMA_SDC_BLMT (1<<7) -#define SDMA_SDC_POVR (1<<8) -#define SDMA_SDC_RIFB (1<<9) - -#define SDMA_SDCM_ERD (1<<7) -#define SDMA_SDCM_AR (1<<15) -#define SDMA_SDCM_STD (1<<16) -#define SDMA_SDCM_TXD (1<<23) -#define SDMA_SDCM_AT (1<<31) - -#define SDMA_0_CAUSE_RXBUF (1<<0) -#define SDMA_0_CAUSE_RXERR (1<<1) -#define SDMA_0_CAUSE_TXBUF (1<<2) -#define SDMA_0_CAUSE_TXEND (1<<3) -#define SDMA_1_CAUSE_RXBUF (1<<8) -#define SDMA_1_CAUSE_RXERR (1<<9) -#define SDMA_1_CAUSE_TXBUF (1<<10) -#define SDMA_1_CAUSE_TXEND (1<<11) - -#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \ - SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) -#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \ - SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) - -/* SDMA Interrupt registers */ -#define SDMA_INTR_CAUSE 0x0000 -#define SDMA_INTR_MASK 0x0080 - -/* - ***************************************************************************** - * - * Baud Rate Generator Interface Registers - * - ***************************************************************************** - */ - -#define BRG_BCR 0x0000 -#define BRG_BTR 0x0004 - -#endif /* __MPSC_H__ */ diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 9b7ed58cb53b..513ff8597707 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1916,6 +1916,16 @@ static void __exit exit_pmz(void) #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +static void pmz_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1924,7 +1934,6 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c { struct uart_pmac_port *uap = &pmz_ports[con->index]; unsigned long flags; - int i; if (ZS_IS_ASLEEP(uap)) return; @@ -1934,17 +1943,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); - for (i = 0; i < count; i++) { - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, s[i]); - if (s[i] == 10) { - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, R13); - } - } + uart_console_write(&uap->port, s, count, pmz_console_putchar); /* Restore the values in the registers. */ write_zsreg(uap, R1, uap->curregs[1]); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 10535f00301f..77d4568ccc3a 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -619,6 +619,14 @@ static inline void wait_for_xmitr(struct uart_pxa_port *up) } } +static void serial_pxa_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -630,7 +638,6 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) { struct uart_pxa_port *up = &serial_pxa_ports[co->index]; unsigned int ier; - int i; /* * First save the IER then disable the interrupts @@ -638,22 +645,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) ier = serial_in(up, UART_IER); serial_out(up, UART_IER, UART_IER_UUE); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, serial_pxa_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 7410e093a6b9..f5aac92fb798 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1066,6 +1066,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, port->mapbase = res->start; port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART); port->irq = platform_get_irq(platdev, 0); + if (port->irq < 0) + port->irq = 0; ourport->clk = clk_get(&platdev->dev, "uart"); @@ -1584,25 +1586,19 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) } static void -s3c24xx_serial_console_write(struct console *co, const char *s, - unsigned int count) +s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { - int i; unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + while (!s3c24xx_serial_console_txrdy(port, ufcon)) + barrier(); + wr_regb(cons_uart, S3C2410_UTXH, ch); +} - for (i = 0; i < count; i++) { - while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon)) - barrier(); - - wr_regb(cons_uart, S3C2410_UTXH, s[i]); - - if (s[i] == '\n') { - while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon)) - barrier(); - - wr_regb(cons_uart, S3C2410_UTXH, '\r'); - } - } +static void +s3c24xx_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); } static void __init diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 2c00b8625852..c2d9068b491d 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -689,6 +689,14 @@ void __init sa1100_register_uart(int idx, int port) #ifdef CONFIG_SERIAL_SA1100_CONSOLE +static void sa1100_console_putchar(struct uart_port *port, int ch) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + while (!(UART_GET_UTSR1(sport) & UTSR1_TNF)) + barrier(); + UART_PUT_CHAR(sport, ch); +} /* * Interrupts are disabled on entering @@ -697,7 +705,7 @@ static void sa1100_console_write(struct console *co, const char *s, unsigned int count) { struct sa1100_port *sport = &sa1100_ports[co->index]; - unsigned int old_utcr3, status, i; + unsigned int old_utcr3, status; /* * First, save UTCR3 and then disable interrupts @@ -706,21 +714,7 @@ sa1100_console_write(struct console *co, const char *s, unsigned int count) UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | UTCR3_TXE); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = UART_GET_UTSR1(sport); - } while (!(status & UTSR1_TNF)); - UART_PUT_CHAR(sport, s[i]); - if (s[i] == '\n') { - do { - status = UART_GET_UTSR1(sport); - } while (!(status & UTSR1_TNF)); - UART_PUT_CHAR(sport, '\r'); - } - } + uart_console_write(&sport->port, s, count, sa1100_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 95fb4939c675..fcd7744c4253 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -71,6 +71,11 @@ static void uart_change_pm(struct uart_state *state, int pm_state); void uart_write_wakeup(struct uart_port *port) { struct uart_info *info = port->info; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + BUG_ON(!info); tasklet_schedule(&info->tlet); } @@ -471,14 +476,26 @@ static void uart_flush_chars(struct tty_struct *tty) } static int -uart_write(struct tty_struct *tty, const unsigned char * buf, int count) +uart_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; - struct circ_buf *circ = &state->info->xmit; + struct uart_port *port; + struct circ_buf *circ; unsigned long flags; int c, ret = 0; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state || !state->info) { + WARN_ON(1); + return -EL3HLT; + } + + port = state->port; + circ = &state->info->xmit; + if (!circ->buf) return 0; @@ -521,6 +538,15 @@ static void uart_flush_buffer(struct tty_struct *tty) struct uart_port *port = state->port; unsigned long flags; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state || !state->info) { + WARN_ON(1); + return; + } + DPRINTK("uart_flush_buffer(%d) called\n", tty->index); spin_lock_irqsave(&port->lock, flags); @@ -1729,6 +1755,27 @@ static int uart_read_proc(char *page, char **start, off_t off, #ifdef CONFIG_SERIAL_CORE_CONSOLE /* + * uart_console_write - write a console message to a serial port + * @port: the port to write the message + * @s: array of characters + * @count: number of characters in string to write + * @write: function to write character to port + */ +void uart_console_write(struct uart_port *port, const char *s, + unsigned int count, + void (*putchar)(struct uart_port *, int)) +{ + unsigned int i; + + for (i = 0; i < count; i++, s++) { + if (*s == '\n') + putchar(port, '\r'); + putchar(port, *s); + } +} +EXPORT_SYMBOL_GPL(uart_console_write); + +/* * Check whether an invalid uart number has been specified, and * if so, search for the first available port that does have * console support. diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index 04186eaae227..aa521b8e0d4e 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -543,6 +543,12 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { #else # define LH7A40X_CONSOLE &lh7a40x_console +static void lh7a40xuart_console_putchar(struct uart_port *port, int ch) +{ + while (UR(port, UART_R_STATUS) & nTxRdy) + ; + UR(port, UART_R_DATA) = ch; +} static void lh7a40xuart_console_write (struct console* co, const char* s, @@ -556,16 +562,7 @@ static void lh7a40xuart_console_write (struct console* co, UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ - for (; count-- > 0; ++s) { - while (UR (port, UART_R_STATUS) & nTxRdy) - ; - UR (port, UART_R_DATA) = *s; - if (*s == '\n') { - while ((UR (port, UART_R_STATUS) & TxBusy)) - ; - UR (port, UART_R_DATA) = '\r'; - } - } + uart_console_write(port, s, count, lh7a40xuart_console_putchar); /* Wait until all characters are sent */ while (UR (port, UART_R_STATUS) & TxBusy) diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index ee98a867bc6d..b848b7d94412 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -33,6 +33,10 @@ * 1.02 Cleanup. (import 8250.c changes) * 1.03 Fix low-latency mode. (import 8250.c changes) * 1.04 Remove usage of deprecated functions, cleanup. + * 1.05 More strict check in verify_port. Cleanup. + * 1.06 Do not insert a char caused previous overrun. + * Fix some spin_locks. + * Do not call uart_add_one_port for absent ports. */ #include <linux/config.h> @@ -57,7 +61,7 @@ #include <asm/io.h> #include <asm/irq.h> -static char *serial_version = "1.04"; +static char *serial_version = "1.06"; static char *serial_name = "TX39/49 Serial driver"; #define PASS_LIMIT 256 @@ -94,6 +98,8 @@ static char *serial_name = "TX39/49 Serial driver"; #define UART_NR 4 #endif +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + struct uart_txx9_port { struct uart_port port; @@ -210,7 +216,7 @@ static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) { switch (up->port.iotype) { default: - return *(volatile u32 *)(up->port.membase + offset); + return __raw_readl(up->port.membase + offset); case UPIO_PORT: return inl(up->port.iobase + offset); } @@ -221,7 +227,7 @@ sio_out(struct uart_txx9_port *up, int offset, int value) { switch (up->port.iotype) { default: - *(volatile u32 *)(up->port.membase + offset) = value; + __raw_writel(value, up->port.membase + offset); break; case UPIO_PORT: outl(value, up->port.iobase + offset); @@ -259,34 +265,19 @@ sio_quot_set(struct uart_txx9_port *up, int quot) static void serial_txx9_stop_tx(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_start_tx(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_stop_rx(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; -#if 0 - sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_RIE); -#endif - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_enable_ms(struct uart_port *port) @@ -302,12 +293,16 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r unsigned int disr = *status; int max_count = 256; char flag; + unsigned int next_ignore_status_mask; do { ch = sio_in(up, TXX9_SIRFIFO); flag = TTY_NORMAL; up->port.icount.rx++; + /* mask out RFDN_MASK bit added by previous overrun */ + next_ignore_status_mask = + up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { /* @@ -328,8 +323,17 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r up->port.icount.parity++; else if (disr & TXX9_SIDISR_UFER) up->port.icount.frame++; - if (disr & TXX9_SIDISR_UOER) + if (disr & TXX9_SIDISR_UOER) { up->port.icount.overrun++; + /* + * The receiver read buffer still hold + * a char which caused overrun. + * Ignore next char by adding RFDN_MASK + * to ignore_status_mask temporarily. + */ + next_ignore_status_mask |= + TXX9_SIDISR_RFDN_MASK; + } /* * Mask off conditions which should be ingored. @@ -349,6 +353,7 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); ignore_char: + up->port.ignore_status_mask = next_ignore_status_mask; disr = sio_in(up, TXX9_SIDISR); } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); spin_unlock(&up->port.lock); @@ -450,14 +455,11 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port) static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); if (mctrl & TIOCM_RTS) sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); else sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_break_ctl(struct uart_port *port, int break_state) @@ -784,8 +786,14 @@ static void serial_txx9_config_port(struct uart_port *port, int uflags) static int serial_txx9_verify_port(struct uart_port *port, struct serial_struct *ser) { - if (ser->irq < 0 || - ser->baud_base < 9600 || ser->type != PORT_TXX9) + unsigned long new_port = ser->port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long)ser->port_high << HIGH_BITS_OFFSET; + if (ser->type != port->type || + ser->irq != port->irq || + ser->io_type != port->iotype || + new_port != port->iobase || + (unsigned long)ser->iomem_base != port->mapbase) return -EINVAL; return 0; } @@ -827,7 +835,8 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv) up->port.line = i; up->port.ops = &serial_txx9_pops; - uart_add_one_port(drv, &up->port); + if (up->port.iobase || up->port.mapbase) + uart_add_one_port(drv, &up->port); } } @@ -854,6 +863,14 @@ static inline void wait_for_xmitr(struct uart_txx9_port *up) } } +static void serial_txx9_console_putchar(struct uart_port *port, int ch) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -865,7 +882,6 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count) { struct uart_txx9_port *up = &serial_txx9_ports[co->index]; unsigned int ier, flcr; - int i; /* * First save the UER then disable the interrupts @@ -879,22 +895,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count) if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - sio_out(up, TXX9_SITFIFO, *s); - if (*s == 10) { - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, 13); - } - } + uart_console_write(&up->port, s, count, serial_txx9_console_putchar); /* * Finally, wait for transmitter to become empty @@ -927,11 +928,6 @@ static int serial_txx9_console_setup(struct console *co, char *options) return -ENODEV; /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - /* * Disable UART interrupts, set DTR and RTS high * and set speed. */ @@ -1041,11 +1037,10 @@ static int __devinit serial_txx9_register_port(struct uart_port *port) mutex_lock(&serial_txx9_mutex); for (i = 0; i < UART_NR; i++) { uart = &serial_txx9_ports[i]; - if (uart->port.type == PORT_UNKNOWN) + if (!(uart->port.iobase || uart->port.mapbase)) break; } if (i < UART_NR) { - uart_remove_one_port(&serial_txx9_reg, &uart->port); uart->port.iobase = port->iobase; uart->port.membase = port->membase; uart->port.irq = port->irq; @@ -1080,9 +1075,8 @@ static void __devexit serial_txx9_unregister_port(int line) uart->port.type = PORT_UNKNOWN; uart->port.iobase = 0; uart->port.mapbase = 0; - uart->port.membase = 0; + uart->port.membase = NULL; uart->port.dev = NULL; - uart_add_one_port(&serial_txx9_reg, &uart->port); mutex_unlock(&serial_txx9_mutex); } @@ -1198,8 +1192,11 @@ static void __exit serial_txx9_exit(void) #ifdef ENABLE_SERIAL_TXX9_PCI pci_unregister_driver(&serial_txx9_pci_driver); #endif - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&serial_txx9_reg, &serial_txx9_ports[i].port); + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + if (up->port.iobase || up->port.mapbase) + uart_remove_one_port(&serial_txx9_reg, &up->port); + } uart_unregister_driver(&serial_txx9_reg); } diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 43e67d6c29d4..60ea4a3f0713 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -820,7 +820,7 @@ static int __init sn_sal_module_init(void) int retval; if (!ia64_platform_is("sn2")) - return -ENODEV; + return 0; printk(KERN_INFO "sn_console: Console driver init\n"); diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c new file mode 100644 index 000000000000..f137804b3133 --- /dev/null +++ b/drivers/serial/sunhv.c @@ -0,0 +1,550 @@ +/* sunhv.c: Serial driver for SUN4V hypervisor console. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/major.h> +#include <linux/circ_buf.h> +#include <linux/serial.h> +#include <linux/sysrq.h> +#include <linux/console.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/hypervisor.h> +#include <asm/spitfire.h> +#include <asm/vdev.h> +#include <asm/oplib.h> +#include <asm/irq.h> + +#if defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/serial_core.h> + +#include "suncore.h" + +#define CON_BREAK ((long)-1) +#define CON_HUP ((long)-2) + +static inline long hypervisor_con_getchar(long *status) +{ + register unsigned long func asm("%o5"); + register unsigned long arg0 asm("%o0"); + register unsigned long arg1 asm("%o1"); + + func = HV_FAST_CONS_GETCHAR; + arg0 = 0; + arg1 = 0; + __asm__ __volatile__("ta %6" + : "=&r" (func), "=&r" (arg0), "=&r" (arg1) + : "0" (func), "1" (arg0), "2" (arg1), + "i" (HV_FAST_TRAP)); + + *status = arg0; + + return (long) arg1; +} + +static inline long hypervisor_con_putchar(long ch) +{ + register unsigned long func asm("%o5"); + register unsigned long arg0 asm("%o0"); + + func = HV_FAST_CONS_PUTCHAR; + arg0 = ch; + __asm__ __volatile__("ta %4" + : "=&r" (func), "=&r" (arg0) + : "0" (func), "1" (arg0), "i" (HV_FAST_TRAP)); + + return (long) arg0; +} + +#define IGNORE_BREAK 0x1 +#define IGNORE_ALL 0x2 + +static int hung_up = 0; + +static struct tty_struct *receive_chars(struct uart_port *port, struct pt_regs *regs) +{ + struct tty_struct *tty = NULL; + int saw_console_brk = 0; + int limit = 10000; + + if (port->info != NULL) /* Unopened serial console */ + tty = port->info->tty; + + while (limit-- > 0) { + long status; + long c = hypervisor_con_getchar(&status); + unsigned char flag; + + if (status == HV_EWOULDBLOCK) + break; + + if (c == CON_BREAK) { + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + c = 0; + } + + if (c == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + } else if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + if (tty == NULL) { + uart_handle_sysrq_char(port, c, regs); + continue; + } + + flag = TTY_NORMAL; + port->icount.rx++; + if (c == CON_BREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + flag = TTY_BREAK; + } + + if (uart_handle_sysrq_char(port, c, regs)) + continue; + + if ((port->ignore_status_mask & IGNORE_ALL) || + ((port->ignore_status_mask & IGNORE_BREAK) && + (c == CON_BREAK))) + continue; + + tty_insert_flip_char(tty, c, flag); + } + + if (saw_console_brk) + sun_do_break(); + + return tty; +} + +static void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + + if (!port->info) + return; + + xmit = &port->info->xmit; + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + while (!uart_circ_empty(xmit)) { + long status = hypervisor_con_putchar(xmit->buf[xmit->tail]); + + if (status != HV_EOK) + break; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t sunhv_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + tty = receive_chars(port, regs); + transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunhv_tx_empty(struct uart_port *port) +{ + /* Transmitter is always empty for us. If the circ buffer + * is non-empty or there is an x_char pending, our caller + * will do the right thing and ignore what we return here. + */ + return TIOCSER_TEMT; +} + +/* port->lock held by caller. */ +static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + return; +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sunhv_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; +} + +/* port->lock held by caller. */ +static void sunhv_stop_tx(struct uart_port *port) +{ + return; +} + +/* port->lock held by caller. */ +static void sunhv_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + while (!uart_circ_empty(xmit)) { + long status = hypervisor_con_putchar(xmit->buf[xmit->tail]); + + if (status != HV_EOK) + break; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } +} + +/* port->lock is not held. */ +static void sunhv_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + int limit = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = hypervisor_con_putchar(ch); + if (status == HV_EOK) + break; + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* port->lock held by caller. */ +static void sunhv_stop_rx(struct uart_port *port) +{ +} + +/* port->lock held by caller. */ +static void sunhv_enable_ms(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state) { + unsigned long flags; + int limit = 1000000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = hypervisor_con_putchar(CON_BREAK); + if (status == HV_EOK) + break; + udelay(2); + } + + spin_unlock_irqrestore(&port->lock, flags); + } +} + +/* port->lock is not held. */ +static int sunhv_startup(struct uart_port *port) +{ + return 0; +} + +/* port->lock is not held. */ +static void sunhv_shutdown(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + unsigned int iflag, cflag; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + iflag = termios->c_iflag; + cflag = termios->c_cflag; + + port->ignore_status_mask = 0; + if (iflag & IGNBRK) + port->ignore_status_mask |= IGNORE_BREAK; + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= IGNORE_ALL; + + /* XXX */ + uart_update_timeout(port, cflag, + (port->uartclk / (16 * quot))); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *sunhv_type(struct uart_port *port) +{ + return "SUN4V HCONS"; +} + +static void sunhv_release_port(struct uart_port *port) +{ +} + +static int sunhv_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunhv_config_port(struct uart_port *port, int flags) +{ +} + +static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sunhv_pops = { + .tx_empty = sunhv_tx_empty, + .set_mctrl = sunhv_set_mctrl, + .get_mctrl = sunhv_get_mctrl, + .stop_tx = sunhv_stop_tx, + .start_tx = sunhv_start_tx, + .send_xchar = sunhv_send_xchar, + .stop_rx = sunhv_stop_rx, + .enable_ms = sunhv_enable_ms, + .break_ctl = sunhv_break_ctl, + .startup = sunhv_startup, + .shutdown = sunhv_shutdown, + .set_termios = sunhv_set_termios, + .type = sunhv_type, + .release_port = sunhv_release_port, + .request_port = sunhv_request_port, + .config_port = sunhv_config_port, + .verify_port = sunhv_verify_port, +}; + +static struct uart_driver sunhv_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static struct uart_port *sunhv_port; + +static inline void sunhv_console_putchar(struct uart_port *port, char c) +{ + unsigned long flags; + int limit = 1000000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = hypervisor_con_putchar(c); + if (status == HV_EOK) + break; + udelay(2); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void sunhv_console_write(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sunhv_port; + int i; + + for (i = 0; i < n; i++) { + if (*s == '\n') + sunhv_console_putchar(port, '\r'); + sunhv_console_putchar(port, *s++); + } +} + +static struct console sunhv_console = { + .name = "ttyHV", + .write = sunhv_console_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunhv_reg, +}; + +static inline struct console *SUNHV_CONSOLE(void) +{ + if (con_is_present()) + return NULL; + + sunhv_console.index = 0; + + return &sunhv_console; +} + +static int __init hv_console_compatible(char *buf, int len) +{ + while (len) { + int this_len; + + if (!strcmp(buf, "qcn")) + return 1; + + this_len = strlen(buf) + 1; + + buf += this_len; + len -= this_len; + } + + return 0; +} + +static unsigned int __init get_interrupt(void) +{ + const char *cons_str = "console"; + const char *compat_str = "compatible"; + int node = prom_getchild(sun4v_vdev_root); + char buf[64]; + int err, len; + + node = prom_searchsiblings(node, cons_str); + if (!node) + return 0; + + len = prom_getproplen(node, compat_str); + if (len == 0 || len == -1) + return 0; + + err = prom_getproperty(node, compat_str, buf, 64); + if (err == -1) + return 0; + + if (!hv_console_compatible(buf, len)) + return 0; + + /* Ok, the this is the OBP node for the sun4v hypervisor + * console device. Decode the interrupt. + */ + return sun4v_vdev_device_interrupt(node); +} + +static int __init sunhv_init(void) +{ + struct uart_port *port; + int ret; + + if (tlb_type != hypervisor) + return -ENODEV; + + port = kmalloc(sizeof(struct uart_port), GFP_KERNEL); + if (unlikely(!port)) + return -ENOMEM; + + memset(port, 0, sizeof(struct uart_port)); + + port->line = 0; + port->ops = &sunhv_pops; + port->type = PORT_SUNHV; + port->uartclk = ( 29491200 / 16 ); /* arbitrary */ + + /* Set this just to make uart_configure_port() happy. */ + port->membase = (unsigned char __iomem *) __pa(port); + + port->irq = get_interrupt(); + if (!port->irq) { + kfree(port); + return -ENODEV; + } + + sunhv_reg.minor = sunserial_current_minor; + sunhv_reg.nr = 1; + + ret = uart_register_driver(&sunhv_reg); + if (ret < 0) { + printk(KERN_ERR "SUNHV: uart_register_driver() failed %d\n", + ret); + kfree(port); + + return ret; + } + + sunhv_reg.tty_driver->name_base = sunhv_reg.minor - 64; + sunserial_current_minor += 1; + + sunhv_reg.cons = SUNHV_CONSOLE(); + + sunhv_port = port; + + ret = uart_add_one_port(&sunhv_reg, port); + if (ret < 0) { + printk(KERN_ERR "SUNHV: uart_add_one_port() failed %d\n", ret); + sunserial_current_minor -= 1; + uart_unregister_driver(&sunhv_reg); + kfree(port); + sunhv_port = NULL; + return -ENODEV; + } + + if (request_irq(port->irq, sunhv_interrupt, + SA_SHIRQ, "serial(sunhv)", port)) { + printk(KERN_ERR "sunhv: Cannot register IRQ\n"); + uart_remove_one_port(&sunhv_reg, port); + sunserial_current_minor -= 1; + uart_unregister_driver(&sunhv_reg); + kfree(port); + sunhv_port = NULL; + return -ENODEV; + } + + return 0; +} + +static void __exit sunhv_exit(void) +{ + struct uart_port *port = sunhv_port; + + BUG_ON(!port); + + free_irq(port->irq, port); + + uart_remove_one_port(&sunhv_reg, port); + sunserial_current_minor -= 1; + + uart_unregister_driver(&sunhv_reg); + + kfree(sunhv_port); + sunhv_port = NULL; +} + +module_init(sunhv_init); +module_exit(sunhv_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("SUN4V Hypervisor console driver") +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 85664228a0b6..bfbe9dc90cca 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -861,8 +861,9 @@ static int num_channels; #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE -static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c) +static void sunsab_console_putchar(struct uart_port *port, int c) { + struct uart_sunsab_port *up = (struct uart_sunsab_port *)port; unsigned long flags; spin_lock_irqsave(&up->port.lock, flags); @@ -876,13 +877,8 @@ static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char static void sunsab_console_write(struct console *con, const char *s, unsigned n) { struct uart_sunsab_port *up = &sunsab_ports[con->index]; - int i; - for (i = 0; i < n; i++) { - if (*s == '\n') - sunsab_console_putchar(up, '\r'); - sunsab_console_putchar(up, *s++); - } + uart_console_write(&up->port, s, n, sunsab_console_putchar); sunsab_tec_wait(up); } @@ -955,14 +951,13 @@ static struct console sunsab_console = { .index = -1, .data = &sunsab_reg, }; -#define SUNSAB_CONSOLE (&sunsab_console) -static void __init sunsab_console_init(void) +static inline struct console *SUNSAB_CONSOLE(void) { int i; if (con_is_present()) - return; + return NULL; for (i = 0; i < num_channels; i++) { int this_minor = sunsab_reg.minor + i; @@ -971,13 +966,14 @@ static void __init sunsab_console_init(void) break; } if (i == num_channels) - return; + return NULL; sunsab_console.index = i; - register_console(&sunsab_console); + + return &sunsab_console; } #else -#define SUNSAB_CONSOLE (NULL) +#define SUNSAB_CONSOLE() (NULL) #define sunsab_console_init() do { } while (0) #endif @@ -1124,7 +1120,6 @@ static int __init sunsab_init(void) sunsab_reg.minor = sunserial_current_minor; sunsab_reg.nr = num_channels; - sunsab_reg.cons = SUNSAB_CONSOLE; ret = uart_register_driver(&sunsab_reg); if (ret < 0) { @@ -1143,10 +1138,12 @@ static int __init sunsab_init(void) return ret; } + sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64; + + sunsab_reg.cons = SUNSAB_CONSOLE(); + sunserial_current_minor += num_channels; - sunsab_console_init(); - for (i = 0; i < num_channels; i++) { struct uart_sunsab_port *up = &sunsab_ports[i]; diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 308704566948..9fe2283d91e5 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -102,9 +102,7 @@ struct uart_sunsu_port { #endif }; -#define _INLINE_ - -static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset) +static unsigned int serial_in(struct uart_sunsu_port *up, int offset) { offset <<= up->port.regshift; @@ -121,8 +119,7 @@ static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset) } } -static _INLINE_ void -serial_out(struct uart_sunsu_port *up, int offset, int value) +static void serial_out(struct uart_sunsu_port *up, int offset, int value) { #ifndef CONFIG_SPARC64 /* @@ -299,13 +296,10 @@ static void sunsu_start_tx(struct uart_port *port) static void sunsu_stop_rx(struct uart_port *port) { struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); - spin_unlock_irqrestore(&up->port.lock, flags); } static void sunsu_enable_ms(struct uart_port *port) @@ -319,7 +313,7 @@ static void sunsu_enable_ms(struct uart_port *port) spin_unlock_irqrestore(&up->port.lock, flags); } -static _INLINE_ struct tty_struct * +static struct tty_struct * receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs) { struct tty_struct *tty = up->port.info->tty; @@ -398,7 +392,7 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs return tty; } -static _INLINE_ void transmit_chars(struct uart_sunsu_port *up) +static void transmit_chars(struct uart_sunsu_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; @@ -434,7 +428,7 @@ static _INLINE_ void transmit_chars(struct uart_sunsu_port *up) __stop_tx(up); } -static _INLINE_ void check_modem_status(struct uart_sunsu_port *up) +static void check_modem_status(struct uart_sunsu_port *up) { int status; @@ -1283,6 +1277,7 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) struct serio *serio; #endif + spin_lock_init(&up->port.lock); up->port.line = channel; up->port.type = PORT_UNKNOWN; up->port.uartclk = (SU_BASE_BAUD * 16); @@ -1379,6 +1374,14 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) } } +static void sunsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1388,7 +1391,6 @@ static void sunsu_console_write(struct console *co, const char *s, { struct uart_sunsu_port *up = &sunsu_ports[co->index]; unsigned int ier; - int i; /* * First save the UER then disable the interrupts @@ -1396,22 +1398,7 @@ static void sunsu_console_write(struct console *co, const char *s, ier = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, sunsu_console_putchar); /* * Finally, wait for transmitter to become empty @@ -1467,18 +1454,17 @@ static struct console sunsu_cons = { .index = -1, .data = &sunsu_reg, }; -#define SUNSU_CONSOLE (&sunsu_cons) /* * Register console. */ -static int __init sunsu_serial_console_init(void) +static inline struct console *SUNSU_CONSOLE(void) { int i; if (con_is_present()) - return 0; + return NULL; for (i = 0; i < UART_NR; i++) { int this_minor = sunsu_reg.minor + i; @@ -1487,16 +1473,16 @@ static int __init sunsu_serial_console_init(void) break; } if (i == UART_NR) - return 0; + return NULL; if (sunsu_ports[i].port_node == 0) - return 0; + return NULL; sunsu_cons.index = i; - register_console(&sunsu_cons); - return 0; + + return &sunsu_cons; } #else -#define SUNSU_CONSOLE (NULL) +#define SUNSU_CONSOLE() (NULL) #define sunsu_serial_console_init() do { } while (0) #endif @@ -1513,6 +1499,7 @@ static int __init sunsu_serial_init(void) up->su_type == SU_PORT_KBD) continue; + spin_lock_init(&up->port.lock); up->port.flags |= UPF_BOOT_AUTOCONF; up->port.type = PORT_UNKNOWN; up->port.uartclk = (SU_BASE_BAUD * 16); @@ -1526,16 +1513,19 @@ static int __init sunsu_serial_init(void) } sunsu_reg.minor = sunserial_current_minor; - sunserial_current_minor += instance; sunsu_reg.nr = instance; - sunsu_reg.cons = SUNSU_CONSOLE; ret = uart_register_driver(&sunsu_reg); if (ret < 0) return ret; - sunsu_serial_console_init(); + sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64; + + sunserial_current_minor += instance; + + sunsu_reg.cons = SUNSU_CONSOLE(); + for (i = 0; i < UART_NR; i++) { struct uart_sunsu_port *up = &sunsu_ports[i]; diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 5cc4d4c2935c..cd49ebbf4a45 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1252,8 +1252,9 @@ static struct zilog_layout __iomem * __init get_zs(int chip, int node) #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ -static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch) +static void sunzilog_putchar(struct uart_port *port, int ch) { + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); int loops = ZS_PUT_CHAR_MAX_DELAY; /* This is a timed polling loop so do not switch the explicit @@ -1284,7 +1285,7 @@ static int sunzilog_serio_write(struct serio *serio, unsigned char ch) spin_lock_irqsave(&sunzilog_serio_lock, flags); - sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch); + sunzilog_putchar(&up->port, ch); spin_unlock_irqrestore(&sunzilog_serio_lock, flags); @@ -1325,16 +1326,10 @@ static void sunzilog_console_write(struct console *con, const char *s, unsigned int count) { struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); unsigned long flags; - int i; spin_lock_irqsave(&up->port.lock, flags); - for (i = 0; i < count; i++, s++) { - sunzilog_put_char(channel, *s); - if (*s == 10) - sunzilog_put_char(channel, 13); - } + uart_console_write(&up->port, s, count, sunzilog_putchar); udelay(2); spin_unlock_irqrestore(&up->port.lock, flags); } @@ -1390,7 +1385,6 @@ static struct console sunzilog_console = { .index = -1, .data = &sunzilog_reg, }; -#define SUNZILOG_CONSOLE (&sunzilog_console) static int __init sunzilog_console_init(void) { @@ -1413,8 +1407,31 @@ static int __init sunzilog_console_init(void) register_console(&sunzilog_console); return 0; } + +static inline struct console *SUNZILOG_CONSOLE(void) +{ + int i; + + if (con_is_present()) + return NULL; + + for (i = 0; i < NUM_CHANNELS; i++) { + int this_minor = sunzilog_reg.minor + i; + + if ((this_minor - 64) == (serial_console - 1)) + break; + } + if (i == NUM_CHANNELS) + return NULL; + + sunzilog_console.index = i; + sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS; + + return &sunzilog_console; +} + #else -#define SUNZILOG_CONSOLE (NULL) +#define SUNZILOG_CONSOLE() (NULL) #define sunzilog_console_init() do { } while (0) #endif @@ -1666,14 +1683,15 @@ static int __init sunzilog_ports_init(void) } sunzilog_reg.nr = uart_count; - sunzilog_reg.cons = SUNZILOG_CONSOLE; - sunzilog_reg.minor = sunserial_current_minor; - sunserial_current_minor += uart_count; ret = uart_register_driver(&sunzilog_reg); if (ret == 0) { - sunzilog_console_init(); + sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64; + sunzilog_reg.cons = SUNZILOG_CONSOLE(); + + sunserial_current_minor += uart_count; + for (i = 0; i < NUM_CHANNELS; i++) { struct uart_sunzilog_port *up = &sunzilog_port_table[i]; diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index d61494d185cd..df5e8713fa31 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -821,25 +821,23 @@ static void wait_for_xmitr(struct uart_port *port) } } +static void siu_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + siu_write(port, UART_TX, ch); +} + static void siu_console_write(struct console *con, const char *s, unsigned count) { struct uart_port *port; uint8_t ier; - unsigned i; port = &siu_uart_ports[con->index]; ier = siu_read(port, UART_IER); siu_write(port, UART_IER, 0); - for (i = 0; i < count && *s != '\0'; i++, s++) { - wait_for_xmitr(port); - siu_write(port, UART_TX, *s); - if (*s == '\n') { - wait_for_xmitr(port); - siu_write(port, UART_TX, '\r'); - } - } + uart_console_write(port, s, count, siu_console_putchar); wait_for_xmitr(port); siu_write(port, UART_IER, ier); @@ -919,7 +917,7 @@ static struct uart_driver siu_uart_driver = { .cons = SERIAL_VR41XX_CONSOLE, }; -static int siu_probe(struct platform_device *dev) +static int __devinit siu_probe(struct platform_device *dev) { struct uart_port *port; int num, i, retval; @@ -953,7 +951,7 @@ static int siu_probe(struct platform_device *dev) return 0; } -static int siu_remove(struct platform_device *dev) +static int __devexit siu_remove(struct platform_device *dev) { struct uart_port *port; int i; @@ -1006,21 +1004,28 @@ static struct platform_device *siu_platform_device; static struct platform_driver siu_device_driver = { .probe = siu_probe, - .remove = siu_remove, + .remove = __devexit_p(siu_remove), .suspend = siu_suspend, .resume = siu_resume, .driver = { .name = "SIU", + .owner = THIS_MODULE, }, }; -static int __devinit vr41xx_siu_init(void) +static int __init vr41xx_siu_init(void) { int retval; - siu_platform_device = platform_device_register_simple("SIU", -1, NULL, 0); - if (IS_ERR(siu_platform_device)) - return PTR_ERR(siu_platform_device); + siu_platform_device = platform_device_alloc("SIU", -1); + if (!siu_platform_device) + return -ENOMEM; + + retval = platform_device_add(siu_platform_device); + if (retval < 0) { + platform_device_put(siu_platform_device); + return retval; + } retval = platform_driver_register(&siu_device_driver); if (retval < 0) @@ -1029,10 +1034,9 @@ static int __devinit vr41xx_siu_init(void) return retval; } -static void __devexit vr41xx_siu_exit(void) +static void __exit vr41xx_siu_exit(void) { platform_driver_unregister(&siu_device_driver); - platform_device_unregister(siu_platform_device); } |