diff options
Diffstat (limited to 'drivers/serial/atmel_serial.h')
| -rw-r--r-- | drivers/serial/atmel_serial.h | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h deleted file mode 100644 index e0141776517c..000000000000 --- a/drivers/serial/atmel_serial.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * drivers/serial/atmel_serial.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USART registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef ATMEL_SERIAL_H -#define ATMEL_SERIAL_H - -#define ATMEL_US_CR 0x00 /* Control Register */ -#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */ -#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */ -#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */ -#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */ -#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */ -#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */ -#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */ -#define ATMEL_US_STTBRK (1 << 9) /* Start Break */ -#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */ -#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */ -#define ATMEL_US_SENDA (1 << 12) /* Send Address */ -#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ -#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ -#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ -#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ -#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ -#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ -#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ - -#define ATMEL_US_MR 0x04 /* Mode Register */ -#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */ -#define ATMEL_US_USMODE_NORMAL 0 -#define ATMEL_US_USMODE_RS485 1 -#define ATMEL_US_USMODE_HWHS 2 -#define ATMEL_US_USMODE_MODEM 3 -#define ATMEL_US_USMODE_ISO7816_T0 4 -#define ATMEL_US_USMODE_ISO7816_T1 6 -#define ATMEL_US_USMODE_IRDA 8 -#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */ -#define ATMEL_US_USCLKS_MCK (0 << 4) -#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) -#define ATMEL_US_USCLKS_SCK (3 << 4) -#define ATMEL_US_CHRL (3 << 6) /* Character Length */ -#define ATMEL_US_CHRL_5 (0 << 6) -#define ATMEL_US_CHRL_6 (1 << 6) -#define ATMEL_US_CHRL_7 (2 << 6) -#define ATMEL_US_CHRL_8 (3 << 6) -#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */ -#define ATMEL_US_PAR (7 << 9) /* Parity Type */ -#define ATMEL_US_PAR_EVEN (0 << 9) -#define ATMEL_US_PAR_ODD (1 << 9) -#define ATMEL_US_PAR_SPACE (2 << 9) -#define ATMEL_US_PAR_MARK (3 << 9) -#define ATMEL_US_PAR_NONE (4 << 9) -#define ATMEL_US_PAR_MULTI_DROP (6 << 9) -#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */ -#define ATMEL_US_NBSTOP_1 (0 << 12) -#define ATMEL_US_NBSTOP_1_5 (1 << 12) -#define ATMEL_US_NBSTOP_2 (2 << 12) -#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */ -#define ATMEL_US_CHMODE_NORMAL (0 << 14) -#define ATMEL_US_CHMODE_ECHO (1 << 14) -#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) -#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) -#define ATMEL_US_MSBF (1 << 16) /* Bit Order */ -#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */ -#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */ -#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */ -#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ -#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */ -#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */ -#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ - -#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ -#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */ -#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */ -#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */ -#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */ -#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ -#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */ -#define ATMEL_US_FRAME (1 << 6) /* Framing Error */ -#define ATMEL_US_PARE (1 << 7) /* Parity Error */ -#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */ -#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ -#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ -#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ -#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ -#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ -#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ -#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ -#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ -#define ATMEL_US_RI (1 << 20) /* RI */ -#define ATMEL_US_DSR (1 << 21) /* DSR */ -#define ATMEL_US_DCD (1 << 22) /* DCD */ -#define ATMEL_US_CTS (1 << 23) /* CTS */ - -#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ -#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ -#define ATMEL_US_CSR 0x14 /* Channel Status Register */ -#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ -#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ -#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */ - -#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ -#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ - -#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ -#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */ - -#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ -#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */ - -#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ -#define ATMEL_US_NER 0x44 /* Number of Errors Register */ -#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ - -#endif |