diff options
Diffstat (limited to 'drivers/scsi')
32 files changed, 3808 insertions, 792 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 3ee9b8b33be0..9c9f162bd6ed 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -489,11 +489,11 @@ config SCSI_SATA_NV If unsure, say N. -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" +config SCSI_PDC_ADMA + tristate "Pacific Digital ADMA support" depends on SCSI_SATA && PCI help - This option enables support for Promise Serial ATA TX2/TX4. + This option enables support for Pacific Digital ADMA controllers If unsure, say N. @@ -505,6 +505,14 @@ config SCSI_SATA_QSTOR If unsure, say N. +config SCSI_SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on SCSI_SATA && PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + config SCSI_SATA_SX4 tristate "Promise SATA SX4 support" depends on SCSI_SATA && PCI && EXPERIMENTAL @@ -521,6 +529,14 @@ config SCSI_SATA_SIL If unsure, say N. +config SCSI_SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on SCSI_SATA && PCI && EXPERIMENTAL + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + config SCSI_SATA_SIS tristate "SiS 964/180 SATA support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 48529d180ca8..2d4439826c08 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -130,6 +130,7 @@ obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o +obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o @@ -137,6 +138,7 @@ obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o +obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c2c8fa828e24..fe8187d6f58b 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -216,7 +216,7 @@ static Scsi_Host_Template ahci_sht = { .ordered_flush = 1, }; -static struct ata_port_operations ahci_ops = { +static const struct ata_port_operations ahci_ops = { .port_disable = ata_port_disable, .check_status = ahci_check_status, @@ -407,7 +407,7 @@ static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) return 0xffffffffU; } - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -425,7 +425,7 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, return; } - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void ahci_phy_reset(struct ata_port *ap) @@ -453,14 +453,14 @@ static void ahci_phy_reset(struct ata_port *ap) static u8 ahci_check_status(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return readl(mmio + PORT_TFDATA) & 0xFF; } static u8 ahci_check_err(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF; } @@ -672,17 +672,36 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap; - u32 tmp; - VPRINTK("port %u\n", i); + if (!(irq_stat & (1 << i))) + continue; + ap = host_set->ports[i]; - tmp = irq_stat & (1 << i); - if (tmp && ap) { + if (ap) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (ahci_host_intr(ap, qc)) - irq_ack |= (1 << i); + if (!ahci_host_intr(ap, qc)) + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): unhandled interrupt on port %u\n", + pci_name(pdev), i); + } + + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): interrupt on disabled port %u\n", + pci_name(pdev), i); + } } + + irq_ack |= (1 << i); } if (irq_ack) { diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index d71cef767cec..be021478f416 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -147,7 +147,7 @@ static Scsi_Host_Template piix_sht = { .ordered_flush = 1, }; -static struct ata_port_operations piix_pata_ops = { +static const struct ata_port_operations piix_pata_ops = { .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, @@ -177,7 +177,7 @@ static struct ata_port_operations piix_pata_ops = { .host_stop = ata_host_stop, }; -static struct ata_port_operations piix_sata_ops = { +static const struct ata_port_operations piix_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index c10e45b94b62..3d13fdee4fc2 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -1357,7 +1357,7 @@ static int port_detect(unsigned long port_base, unsigned int j, for (i = 0; i < shost->can_queue; i++) { size_t sz = shost->sg_tablesize *sizeof(struct sg_list); - unsigned int gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC; + gfp_t gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC; ha->cp[i].sglist = kmalloc(sz, gfp_mask); if (!ha->cp[i].sglist) { printk diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 02fe371b0ab8..f24d84538fd5 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -287,7 +287,8 @@ static void scsi_host_dev_release(struct device *dev) struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) { struct Scsi_Host *shost; - int gfp_mask = GFP_KERNEL, rval; + gfp_t gfp_mask = GFP_KERNEL; + int rval; if (sht->unchecked_isa_dma && privsize) gfp_mask |= __GFP_DMA; diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..f53d7b8ac33f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -48,6 +48,7 @@ #include <linux/completion.h> #include <linux/suspend.h> #include <linux/workqueue.h> +#include <linux/jiffies.h> #include <scsi/scsi.h> #include "scsi.h" #include "scsi_priv.h" @@ -62,14 +63,15 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift); +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); static int fgb(u32 bitmap); -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); static void __ata_qc_complete(struct ata_queued_cmd *qc); static unsigned int ata_unique_id = 1; @@ -85,7 +87,7 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); /** - * ata_tf_load - send taskfile registers to host controller + * ata_tf_load_pio - send taskfile registers to host controller * @ap: Port to which output is sent * @tf: ATA taskfile register set * @@ -95,7 +97,7 @@ MODULE_VERSION(DRV_VERSION); * Inherited from caller. */ -static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -153,7 +155,7 @@ static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) * Inherited from caller. */ -static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -222,7 +224,7 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * Inherited from caller. */ -void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_tf_load_mmio(ap, tf); @@ -242,7 +244,7 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -263,7 +265,7 @@ static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -283,7 +285,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * spin_lock_irqsave(host_set lock) */ -void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_exec_command_mmio(ap, tf); @@ -303,7 +305,7 @@ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) +static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf) { unsigned long flags; @@ -326,7 +328,7 @@ static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); @@ -346,7 +348,7 @@ static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); ap->ops->exec_command(ap, tf); @@ -556,7 +558,7 @@ u8 ata_chk_err(struct ata_port *ap) * Inherited from caller. */ -void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) +void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) { fis[0] = 0x27; /* Register - Host to Device FIS */ fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, @@ -597,7 +599,7 @@ void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) * Inherited from caller. */ -void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) +void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) { tf->command = fis[2]; /* status */ tf->feature = fis[3]; /* error */ @@ -615,79 +617,53 @@ void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) tf->hob_nsect = fis[13]; } -/** - * ata_prot_to_cmd - determine which read/write opcodes to use - * @protocol: ATA_PROT_xxx taskfile protocol - * @lba48: true is lba48 is present - * - * Given necessary input, determine which read/write commands - * to use to transfer data. - * - * LOCKING: - * None. - */ -static int ata_prot_to_cmd(int protocol, int lba48) -{ - int rcmd = 0, wcmd = 0; - - switch (protocol) { - case ATA_PROT_PIO: - if (lba48) { - rcmd = ATA_CMD_PIO_READ_EXT; - wcmd = ATA_CMD_PIO_WRITE_EXT; - } else { - rcmd = ATA_CMD_PIO_READ; - wcmd = ATA_CMD_PIO_WRITE; - } - break; - - case ATA_PROT_DMA: - if (lba48) { - rcmd = ATA_CMD_READ_EXT; - wcmd = ATA_CMD_WRITE_EXT; - } else { - rcmd = ATA_CMD_READ; - wcmd = ATA_CMD_WRITE; - } - break; - - default: - return -1; - } - - return rcmd | (wcmd << 8); -} +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT +}; /** - * ata_dev_set_protocol - set taskfile protocol and r/w commands - * @dev: device to examine and configure + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @qc: command to examine and configure * - * Examine the device configuration, after we have - * read the identify-device page and configured the - * data transfer mode. Set internal state related to - * the ATA taskfile protocol (pio, pio mult, dma, etc.) - * and calculate the proper read/write commands to use. + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. * * LOCKING: * caller. */ -static void ata_dev_set_protocol(struct ata_device *dev) +void ata_rwcmd_protocol(struct ata_queued_cmd *qc) { - int pio = (dev->flags & ATA_DFLAG_PIO); - int lba48 = (dev->flags & ATA_DFLAG_LBA48); - int proto, cmd; + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; - if (pio) - proto = dev->xfer_protocol = ATA_PROT_PIO; - else - proto = dev->xfer_protocol = ATA_PROT_DMA; + int index, lba48, write; + + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - cmd = ata_prot_to_cmd(proto, lba48); - if (cmd < 0) - BUG(); + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 4; + } else { + tf->protocol = ATA_PROT_DMA; + index = 8; + } - dev->read_cmd = cmd & 0xff; - dev->write_cmd = (cmd >> 8) & 0xff; + tf->command = ata_rw_cmds[index + lba48 + write]; } static const char * xfer_mode_str[] = { @@ -869,7 +845,7 @@ static unsigned int ata_devchk(struct ata_port *ap, * the event of failure. */ -unsigned int ata_dev_classify(struct ata_taskfile *tf) +unsigned int ata_dev_classify(const struct ata_taskfile *tf) { /* Apple's open source Darwin code hints that some devices only * put a proper signature into the LBA mid/high registers, @@ -961,7 +937,7 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) * caller. */ -void ata_dev_id_string(u16 *id, unsigned char *s, +void ata_dev_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len) { unsigned int c; @@ -1078,7 +1054,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, * caller. */ -static inline void ata_dump_id(struct ata_device *dev) +static inline void ata_dump_id(const struct ata_device *dev) { DPRINTK("49==0x%04x " "53==0x%04x " @@ -1106,6 +1082,31 @@ static inline void ata_dump_id(struct ata_device *dev) dev->id[93]); } +/* + * Compute the PIO modes available for this device. This is not as + * trivial as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + */ + +static unsigned int ata_pio_modes(const struct ata_device *adev) +{ + u16 modes; + + /* Usual case. Word 53 indicates word 88 is valid */ + if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) { + modes = adev->id[ATA_ID_PIO_MODES] & 0x03; + modes <<= 3; + modes |= 0x7; + return modes; + } + + /* If word 88 isn't valid then Word 51 holds the PIO timing number + for the maximum. Turn it into a mask and return it */ + modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + return modes; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -1131,7 +1132,7 @@ static inline void ata_dump_id(struct ata_device *dev) static void ata_dev_identify(struct ata_port *ap, unsigned int device) { struct ata_device *dev = &ap->device[device]; - unsigned int i; + unsigned int major_version; u16 tmp; unsigned long xfer_modes; u8 status; @@ -1229,9 +1230,9 @@ retry: * common ATA, ATAPI feature tests */ - /* we require LBA and DMA support (bits 8 & 9 of word 49) */ - if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) { - printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id); + /* we require DMA support (bits 8 of word 49) */ + if (!ata_id_has_dma(dev->id)) { + printk(KERN_DEBUG "ata%u: no dma\n", ap->id); goto err_out_nosup; } @@ -1239,10 +1240,8 @@ retry: xfer_modes = dev->id[ATA_ID_UDMA_MODES]; if (!xfer_modes) xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) { - xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3); - xfer_modes |= (0x7 << ATA_SHIFT_PIO); - } + if (!xfer_modes) + xfer_modes = ata_pio_modes(dev); ata_dump_id(dev); @@ -1251,32 +1250,75 @@ retry: if (!ata_id_is_ata(dev->id)) /* sanity check */ goto err_out_nosup; + /* get major version */ tmp = dev->id[ATA_ID_MAJOR_VER]; - for (i = 14; i >= 1; i--) - if (tmp & (1 << i)) + for (major_version = 14; major_version >= 1; major_version--) + if (tmp & (1 << major_version)) break; - /* we require at least ATA-3 */ - if (i < 3) { - printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id); - goto err_out_nosup; + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (major_version < 4 || (!ata_id_has_lba(dev->id))) { + ata_dev_init_params(ap, dev); + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + ata_dev_reread_id(ap, dev); } - if (ata_id_has_lba48(dev->id)) { - dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); + if (ata_id_has_lba(dev->id)) { + dev->flags |= ATA_DFLAG_LBA; + + if (ata_id_has_lba48(dev->id)) { + dev->flags |= ATA_DFLAG_LBA48; + dev->n_sectors = ata_id_u64(dev->id, 100); + } else { + dev->n_sectors = ata_id_u32(dev->id, 60); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = dev->id[1]; + dev->heads = dev->id[3]; + dev->sectors = dev->id[6]; + dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; + + if (ata_id_current_chs_valid(dev->id)) { + /* Current CHS translation is valid. */ + dev->cylinders = dev->id[54]; + dev->heads = dev->id[55]; + dev->sectors = dev->id[56]; + + dev->n_sectors = ata_id_u32(dev->id, 57); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); + } ap->host->max_cmd_len = 16; - - /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n", - ap->id, device, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " lba48" : ""); } /* ATAPI-specific feature tests */ @@ -1310,7 +1352,7 @@ err_out: } -static inline u8 ata_dev_knobble(struct ata_port *ap) +static inline u8 ata_dev_knobble(const struct ata_port *ap) { return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); } @@ -1496,7 +1538,153 @@ void ata_port_disable(struct ata_port *ap) ap->flags |= ATA_FLAG_PORT_DISABLED; } -static struct { +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static const struct ata_timing ata_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + +/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + + { 0xFF } +}; + +#define ENOUGH(v,unit) (((v)-1)/(unit)+1) +#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +{ + const struct ata_timing *t; + + for (t = ata_timing; t->mode != speed; t++) + if (t->mode == 0xFF) + return NULL; + return t; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; + else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; + } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; + } + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(s, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T + * and some other commands. We have to ensure that the DMA cycle timing is + * slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_4) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lenghten active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} + +static const struct { unsigned int shift; u8 base; } xfer_mode_classes[] = { @@ -1603,7 +1791,7 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, */ static void ata_set_mode(struct ata_port *ap) { - unsigned int i, xfer_shift; + unsigned int xfer_shift; u8 xfer_mode; int rc; @@ -1632,11 +1820,6 @@ static void ata_set_mode(struct ata_port *ap) if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - for (i = 0; i < 2; i++) { - struct ata_device *dev = &ap->device[i]; - ata_dev_set_protocol(dev); - } - return; err_out: @@ -1910,7 +2093,8 @@ err_out: DPRINTK("EXIT\n"); } -static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev) +static void ata_pr_blacklisted(const struct ata_port *ap, + const struct ata_device *dev) { printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n", ap->id, dev->devno); @@ -1948,7 +2132,7 @@ static const char * ata_dma_blacklist [] = { "_NEC DV5800A", }; -static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) +static int ata_dma_blacklisted(const struct ata_device *dev) { unsigned char model_num[40]; char *s; @@ -1973,9 +2157,9 @@ static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) return 0; } -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) { - struct ata_device *master, *slave; + const struct ata_device *master, *slave; unsigned int mask; master = &ap->device[0]; @@ -1987,14 +2171,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->udma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2004,14 +2188,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->mwdma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2075,7 +2259,7 @@ static int fgb(u32 bitmap) * Zero on success, negative on error. */ -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out) { @@ -2144,6 +2328,110 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** + * ata_dev_reread_id - Reread the device identify device info + * @ap: port where the device is + * @dev: device to reread the identify device info + * + * LOCKING: + */ + +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + ata_sg_init_one(qc, dev->id, sizeof(dev->id)); + qc->dma_dir = DMA_FROM_DEVICE; + + if (dev->class == ATA_DEV_ATA) { + qc->tf.command = ATA_CMD_ID_ATA; + DPRINTK("do ATA identify\n"); + } else { + qc->tf.command = ATA_CMD_ID_ATAPI; + DPRINTK("do ATAPI identify\n"); + } + + qc->tf.flags |= ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_PIO; + qc->nsect = 1; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + goto err_out; + + wait_for_completion(&wait); + + swap_buf_le16(dev->id, ATA_ID_WORDS); + + ata_dump_id(dev); + + DPRINTK("EXIT\n"); + + return; +err_out: + ata_port_disable(ap); +} + +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @ap: Port associated with device @dev + * @dev: Device to which command will be sent + * + * LOCKING: + */ + +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + int rc; + unsigned long flags; + u16 sectors = dev->id[6]; + u16 heads = dev->id[3]; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + qc->tf.command = ATA_CMD_INIT_DEV_PARAMS; + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_NODATA; + qc->tf.nsect = sectors; + qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + +/** * ata_sg_clean - Unmap DMA memory associated with command * @qc: Command containing DMA memory to be released * @@ -2413,32 +2701,32 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) /** * ata_pio_poll - - * @ap: + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) * * RETURNS: - * + * timeout value to use */ static unsigned long ata_pio_poll(struct ata_port *ap) { u8 status; - unsigned int poll_state = PIO_ST_UNKNOWN; - unsigned int reg_state = PIO_ST_UNKNOWN; - const unsigned int tmout_state = PIO_ST_TMOUT; - - switch (ap->pio_task_state) { - case PIO_ST: - case PIO_ST_POLL: - poll_state = PIO_ST_POLL; - reg_state = PIO_ST; + unsigned int poll_state = HSM_ST_UNKNOWN; + unsigned int reg_state = HSM_ST_UNKNOWN; + const unsigned int tmout_state = HSM_ST_TMOUT; + + switch (ap->hsm_task_state) { + case HSM_ST: + case HSM_ST_POLL: + poll_state = HSM_ST_POLL; + reg_state = HSM_ST; break; - case PIO_ST_LAST: - case PIO_ST_LAST_POLL: - poll_state = PIO_ST_LAST_POLL; - reg_state = PIO_ST_LAST; + case HSM_ST_LAST: + case HSM_ST_LAST_POLL: + poll_state = HSM_ST_LAST_POLL; + reg_state = HSM_ST_LAST; break; default: BUG(); @@ -2448,20 +2736,20 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - ap->pio_task_state = tmout_state; + ap->hsm_task_state = tmout_state; return 0; } - ap->pio_task_state = poll_state; + ap->hsm_task_state = poll_state; return ATA_SHORT_PAUSE; } - ap->pio_task_state = reg_state; + ap->hsm_task_state = reg_state; return 0; } /** - * ata_pio_complete - - * @ap: + * ata_pio_complete - check if drive is busy or idle + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -2480,14 +2768,14 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { msleep(2); drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { - ap->pio_task_state = PIO_ST_LAST_POLL; + ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return 0; } @@ -2495,14 +2783,14 @@ static int ata_pio_complete (struct ata_port *ap) drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return 0; } qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat); @@ -2513,7 +2801,7 @@ static int ata_pio_complete (struct ata_port *ap) /** - * swap_buf_le16 - + * swap_buf_le16 - swap halves of 16-words in place * @buf: Buffer to swap * @buf_words: Number of 16-bit words in buffer. * @@ -2522,6 +2810,7 @@ static int ata_pio_complete (struct ata_port *ap) * vice-versa. * * LOCKING: + * Inherited from caller. */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { @@ -2544,7 +2833,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * * LOCKING: * Inherited from caller. - * */ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2590,7 +2878,6 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2630,7 +2917,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2662,7 +2948,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned char *buf; if (qc->cursect == (qc->nsect - 1)) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; page = sg[qc->cursg].page; offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; @@ -2712,7 +2998,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned int offset, count; if (qc->curbytes + bytes >= qc->nbytes) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; next_sg: if (unlikely(qc->cursg >= qc->n_elem)) { @@ -2734,7 +3020,7 @@ next_sg: for (i = 0; i < words; i++) ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2783,7 +3069,6 @@ next_sg: * * LOCKING: * Inherited from caller. - * */ static void atapi_pio_bytes(struct ata_queued_cmd *qc) @@ -2815,12 +3100,12 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; } /** - * ata_pio_sector - - * @ap: + * ata_pio_block - start PIO on a block + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -2832,19 +3117,19 @@ static void ata_pio_block(struct ata_port *ap) u8 status; /* - * This is purely hueristic. This is a fast path. + * This is purely heuristic. This is a fast path. * Sometimes when we enter, BSY will be cleared in * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then * chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ status = ata_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ap->pio_task_state = PIO_ST_POLL; + ap->hsm_task_state = HSM_ST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return; } @@ -2856,7 +3141,7 @@ static void ata_pio_block(struct ata_port *ap) if (is_atapi_taskfile(&qc->tf)) { /* no more data to transfer or unsupported ATAPI command */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2864,7 +3149,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return; } @@ -2884,7 +3169,7 @@ static void ata_pio_error(struct ata_port *ap) printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n", ap->id, drv_stat); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat | ATA_ERR); } @@ -2899,25 +3184,25 @@ fsm_start: timeout = 0; qc_completed = 0; - switch (ap->pio_task_state) { - case PIO_ST_IDLE: + switch (ap->hsm_task_state) { + case HSM_ST_IDLE: return; - case PIO_ST: + case HSM_ST: ata_pio_block(ap); break; - case PIO_ST_LAST: + case HSM_ST_LAST: qc_completed = ata_pio_complete(ap); break; - case PIO_ST_POLL: - case PIO_ST_LAST_POLL: + case HSM_ST_POLL: + case HSM_ST_LAST_POLL: timeout = ata_pio_poll(ap); break; - case PIO_ST_TMOUT: - case PIO_ST_ERR: + case HSM_ST_TMOUT: + case HSM_ST_ERR: ata_pio_error(ap); return; } @@ -2928,52 +3213,6 @@ fsm_start: goto fsm_start; } -static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd) -{ - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; - int rc; - - DPRINTK("ATAPI request sense\n"); - - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); - - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); - qc->dma_dir = DMA_FROM_DEVICE; - - memset(&qc->cdb, 0, ap->cdb_len); - qc->cdb[0] = REQUEST_SENSE; - qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.command = ATA_CMD_PACKET; - - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - qc->nbytes = SCSI_SENSE_BUFFERSIZE; - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - if (rc) - ata_port_disable(ap); - else - wait_for_completion(&wait); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out @@ -3091,14 +3330,14 @@ void ata_eng_timeout(struct ata_port *ap) DPRINTK("ENTER\n"); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { + if (qc) + ata_qc_timeout(qc); + else { printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); goto out; } - ata_qc_timeout(qc); - out: DPRINTK("EXIT\n"); } @@ -3155,15 +3394,12 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, qc->nbytes = qc->curbytes = 0; ata_tf_init(ap, &qc->tf, dev->devno); - - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; } return qc; } -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) +int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) { return 0; } @@ -3201,7 +3437,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ void ata_qc_free(struct ata_queued_cmd *qc) { @@ -3221,7 +3456,6 @@ void ata_qc_free(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -3360,7 +3594,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ ata_qc_set_polling(qc); ata_tf_to_host_nolock(ap, &qc->tf); - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); break; @@ -3586,7 +3820,7 @@ u8 ata_bmdma_status(struct ata_port *ap) void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; host_stat = readb(mmio + ATA_DMA_STATUS); } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); return host_stat; } @@ -3715,7 +3949,6 @@ idle_irq: * * RETURNS: * IRQ_NONE or IRQ_HANDLED. - * */ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) @@ -3806,7 +4039,7 @@ static void atapi_packet_task(void *_data) ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); /* PIO commands are handled by polling */ - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); } @@ -3827,6 +4060,7 @@ err_out: * May be used as the port_start() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ int ata_port_start (struct ata_port *ap) @@ -3852,6 +4086,7 @@ int ata_port_start (struct ata_port *ap) * May be used as the port_stop() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ void ata_port_stop (struct ata_port *ap) @@ -3874,6 +4109,7 @@ void ata_host_stop (struct ata_host_set *host_set) * @do_unregister: 1 if we fully unregister, 0 to just stop the port * * LOCKING: + * Inherited from caller. */ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) @@ -3901,12 +4137,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * * LOCKING: * Inherited from caller. - * */ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, struct ata_host_set *host_set, - struct ata_probe_ent *ent, unsigned int port_no) + const struct ata_probe_ent *ent, unsigned int port_no) { unsigned int i; @@ -3962,10 +4197,9 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * * RETURNS: * New ata_port on success, for NULL on error. - * */ -static struct ata_port * ata_host_add(struct ata_probe_ent *ent, +static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, struct ata_host_set *host_set, unsigned int port_no) { @@ -4010,10 +4244,9 @@ err_out: * * RETURNS: * Number of ports registered. Zero on error (no ports registered). - * */ -int ata_device_add(struct ata_probe_ent *ent) +int ata_device_add(const struct ata_probe_ent *ent) { unsigned int count = 0, i; struct device *dev = ent->dev; @@ -4113,7 +4346,7 @@ int ata_device_add(struct ata_probe_ent *ent) for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; - scsi_scan_host(ap->host); + ata_scsi_scan_host(ap); } dev_set_drvdata(dev, host_set); @@ -4142,7 +4375,6 @@ err_out: * Inherited from calling layer (may sleep). */ - void ata_host_set_remove(struct ata_host_set *host_set) { struct ata_port *ap; @@ -4232,7 +4464,7 @@ void ata_std_ports(struct ata_ioports *ioaddr) } static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) { struct ata_probe_ent *probe_ent; @@ -4273,85 +4505,86 @@ void ata_pci_host_stop (struct ata_host_set *host_set) * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present * * Utility function which allocates and initializes an * ata_probe_ent structure for a standard dual-port * PIO-based IDE controller. The returned ata_probe_ent * structure can be passed to ata_device_add(). The returned * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. */ struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) { struct ata_probe_ent *probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + if (!probe_ent) return NULL; - probe_ent->n_ports = 2; probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; - probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[1].altstatus_addr = - probe_ent->port[1].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8; + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); + ata_std_ports(&probe_ent->port[p]); + p++; + } - ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent->port[1]); + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; + ata_std_ports(&probe_ent->port[p]); + p++; + } + probe_ent->n_ports = p; return probe_ent; } -static struct ata_probe_ent * -ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, - struct ata_probe_ent **ppe2) +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num) { - struct ata_probe_ent *probe_ent, *probe_ent2; + struct ata_probe_ent *probe_ent; probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); if (!probe_ent) return NULL; - probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]); - if (!probe_ent2) { - kfree(probe_ent); - return NULL; - } - - probe_ent->n_ports = 1; - probe_ent->irq = 14; - probe_ent->hard_port_no = 0; probe_ent->legacy_mode = 1; - - probe_ent2->n_ports = 1; - probe_ent2->irq = 15; - - probe_ent2->hard_port_no = 1; - probe_ent2->legacy_mode = 1; - - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent2->port[0].cmd_addr = 0x170; - probe_ent2->port[0].altstatus_addr = - probe_ent2->port[0].ctl_addr = 0x376; - probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8; - + probe_ent->n_ports = 1; + probe_ent->hard_port_no = port_num; + + switch(port_num) + { + case 0: + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = 0x1f0; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x3f6; + break; + case 1: + probe_ent->irq = 15; + probe_ent->port[0].cmd_addr = 0x170; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x376; + break; + } + probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent2->port[0]); - - *ppe2 = probe_ent2; return probe_ent; } @@ -4374,13 +4607,12 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * * RETURNS: * Zero on success, negative on errno-based value on error. - * */ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { - struct ata_probe_ent *probe_ent, *probe_ent2 = NULL; + struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; struct ata_port_info *port[2]; u8 tmp8, mask; unsigned int legacy_mode = 0; @@ -4397,7 +4629,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: support transitioning to native mode? */ + /* TODO: What if one channel is in native mode ... */ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); mask = (1 << 2) | (1 << 0); if ((tmp8 & mask) != mask) @@ -4405,11 +4637,20 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } /* FIXME... */ - if ((!legacy_mode) && (n_ports > 1)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n"); - return -EINVAL; + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ } + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + rc = pci_enable_device(pdev); if (rc) return rc; @@ -4420,6 +4661,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; } + /* FIXME: Should use platform specific mappers for legacy port ranges */ if (legacy_mode) { if (!request_region(0x1f0, 8, "libata")) { struct resource *conflict, res; @@ -4464,10 +4706,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out_regions; if (legacy_mode) { - probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2); - } else - probe_ent = ata_pci_init_native_mode(pdev, port); - if (!probe_ent) { + if (legacy_mode & (1 << 0)) + probe_ent = ata_pci_init_legacy_port(pdev, port, 0); + if (legacy_mode & (1 << 1)) + probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent && !probe_ent2) { rc = -ENOMEM; goto err_out_regions; } @@ -4505,7 +4754,7 @@ err_out: * @pdev: PCI device that was removed * * PCI layer indicates to libata via this hook that - * hot-unplug or module unload event has occured. + * hot-unplug or module unload event has occurred. * Handle this by unregistering all objects associated * with this PCI device. Free those objects. Then finally * release PCI resources and disable device. @@ -4526,7 +4775,7 @@ void ata_pci_remove_one (struct pci_dev *pdev) } /* move to PCI subsystem */ -int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) +int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) { unsigned long tmp = 0; @@ -4579,6 +4828,27 @@ static void __exit ata_exit(void) module_init(ata_init); module_exit(ata_exit); +static unsigned long ratelimit_time; +static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED; + +int ata_ratelimit(void) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&ata_ratelimit_lock, flags); + + if (time_after(jiffies, ratelimit_time)) { + rc = 1; + ratelimit_time = jiffies + (HZ/5); + } else + rc = 0; + + spin_unlock_irqrestore(&ata_ratelimit_lock, flags); + + return rc; +} + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -4620,6 +4890,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_port_disable); +EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_error); @@ -4631,6 +4902,9 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); + #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_host_stop); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 104fd9a63e73..58858886d751 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -44,11 +44,19 @@ #include "libata.h" -typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd); +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + done(cmd); +} + /** * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. * @sdev: SCSI device for which BIOS geometry is to be determined @@ -182,7 +190,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; u8 err = 0; - unsigned char *sb = cmd->sense_buffer; /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -225,8 +232,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) }; int i = 0; - cmd->result = SAM_STAT_CHECK_CONDITION; - /* * Is this an error we can process/parse */ @@ -281,11 +286,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) /* Look for best matches first */ if((sense_table[i][0] & err) == sense_table[i][0]) { - sb[0] = 0x70; - sb[2] = sense_table[i][1]; - sb[7] = 0x0a; - sb[12] = sense_table[i][2]; - sb[13] = sense_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -300,11 +303,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { if(stat_table[i][0] & drv_stat) { - sb[0] = 0x70; - sb[2] = stat_table[i][1]; - sb[7] = 0x0a; - sb[12] = stat_table[i][2]; - sb[13] = stat_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -313,15 +314,12 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); /* additional-sense-code[-qualifier] */ - sb[0] = 0x70; - sb[2] = MEDIUM_ERROR; - sb[7] = 0x0A; if (cmd->sc_data_direction == DMA_FROM_DEVICE) { - sb[12] = 0x11; /* "unrecovered read error" */ - sb[13] = 0x04; + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4); + /* "unrecovered read error" */ } else { - sb[12] = 0x0C; /* "write error - */ - sb[13] = 0x02; /* auto-reallocation failed" */ + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2); + /* "write error - auto-reallocation failed" */ } } @@ -420,7 +418,7 @@ int ata_scsi_error(struct Scsi_Host *host) */ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, - u8 *scsicmd) + const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; @@ -430,15 +428,26 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, ; /* ignore IMMED bit, violates sat-r05 */ } if (scsicmd[4] & 0x2) - return 1; /* LOEJ bit set not supported */ + goto invalid_fld; /* LOEJ bit set not supported */ if (((scsicmd[4] >> 4) & 0xf) != 0) - return 1; /* power conditions not supported */ + goto invalid_fld; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; + + if (qc->dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { tf->nsect = 0; /* time period value (0 implies now) */ @@ -453,6 +462,11 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, */ return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; } @@ -471,14 +485,14 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; tf->flags |= ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if ((tf->flags & ATA_TFLAG_LBA48) && + if ((qc->dev->flags & ATA_DFLAG_LBA48) && (ata_id_has_flush_ext(qc->dev->id))) tf->command = ATA_CMD_FLUSH_EXT; else @@ -488,6 +502,99 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } /** + * scsi_6_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 8; + lba |= ((u64)scsicmd[3]); + + len |= ((u32)scsicmd[4]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 24; + lba |= ((u64)scsicmd[3]) << 16; + lba |= ((u64)scsicmd[4]) << 8; + lba |= ((u64)scsicmd[5]); + + len |= ((u32)scsicmd[7]) << 8; + len |= ((u32)scsicmd[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 56; + lba |= ((u64)scsicmd[3]) << 48; + lba |= ((u64)scsicmd[4]) << 40; + lba |= ((u64)scsicmd[5]) << 32; + lba |= ((u64)scsicmd[6]) << 24; + lba |= ((u64)scsicmd[7]) << 16; + lba |= ((u64)scsicmd[8]) << 8; + lba |= ((u64)scsicmd[9]); + + len |= ((u32)scsicmd[10]) << 24; + len |= ((u32)scsicmd[11]) << 16; + len |= ((u32)scsicmd[12]) << 8; + len |= ((u32)scsicmd[13]); + + *plba = lba; + *plen = len; +} + +/** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate @@ -501,82 +608,110 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; + struct ata_device *dev = qc->dev; u64 dev_sectors = qc->dev->n_sectors; - u64 sect = 0; - u32 n_sect = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - tf->device |= ATA_LBA; - if (scsicmd[0] == VERIFY) { - sect |= ((u64)scsicmd[2]) << 24; - sect |= ((u64)scsicmd[3]) << 16; - sect |= ((u64)scsicmd[4]) << 8; - sect |= ((u64)scsicmd[5]); + if (scsicmd[0] == VERIFY) + scsi_10_lba_len(scsicmd, &block, &n_block); + else if (scsicmd[0] == VERIFY_16) + scsi_16_lba_len(scsicmd, &block, &n_block); + else + goto invalid_fld; - n_sect |= ((u32)scsicmd[7]) << 8; - n_sect |= ((u32)scsicmd[8]); - } + if (!n_block) + goto nothing_to_do; + if (block >= dev_sectors) + goto out_of_range; + if ((block + n_block) > dev_sectors) + goto out_of_range; - else if (scsicmd[0] == VERIFY_16) { - sect |= ((u64)scsicmd[2]) << 56; - sect |= ((u64)scsicmd[3]) << 48; - sect |= ((u64)scsicmd[4]) << 40; - sect |= ((u64)scsicmd[5]) << 32; - sect |= ((u64)scsicmd[6]) << 24; - sect |= ((u64)scsicmd[7]) << 16; - sect |= ((u64)scsicmd[8]) << 8; - sect |= ((u64)scsicmd[9]); - - n_sect |= ((u32)scsicmd[10]) << 24; - n_sect |= ((u32)scsicmd[11]) << 16; - n_sect |= ((u32)scsicmd[12]) << 8; - n_sect |= ((u32)scsicmd[13]); - } + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; - else - return 1; + if (dev->flags & ATA_DFLAG_LBA48) { + if (n_block > (64 * 1024)) + goto invalid_fld; - if (!n_sect) - return 1; - if (sect >= dev_sectors) - return 1; - if ((sect + n_sect) > dev_sectors) - return 1; - if (lba48) { - if (n_sect > (64 * 1024)) - return 1; - } else { - if (n_sect > 256) - return 1; - } + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + tf->command = ATA_CMD_VERIFY_EXT; - if (lba48) { - tf->command = ATA_CMD_VERIFY_EXT; + tf->hob_nsect = (n_block >> 8) & 0xff; - tf->hob_nsect = (n_sect >> 8) & 0xff; + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + if (n_block > 256) + goto invalid_fld; - tf->hob_lbah = (sect >> 40) & 0xff; - tf->hob_lbam = (sect >> 32) & 0xff; - tf->hob_lbal = (sect >> 24) & 0xff; + /* use LBA28 */ + tf->command = ATA_CMD_VERIFY; + + tf->device |= (block >> 24) & 0xf; + } + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; } else { + /* CHS */ + u32 sect, head, cyl, track; + + if (n_block > 256) + goto invalid_fld; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + tf->command = ATA_CMD_VERIFY; - - tf->device |= (sect >> 24) & 0xf; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; } - tf->nsect = n_sect & 0xff; + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; - tf->lbah = (sect >> 16) & 0xff; - tf->lbam = (sect >> 8) & 0xff; - tf->lbal = sect & 0xff; +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; - return 0; +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } /** @@ -599,106 +734,137 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; + struct ata_device *dev = qc->dev; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf->protocol = qc->dev->xfer_protocol; - tf->device |= ATA_LBA; - if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || - scsicmd[0] == READ_16) { - tf->command = qc->dev->read_cmd; - } else { - tf->command = qc->dev->write_cmd; + if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || + scsicmd[0] == WRITE_16) tf->flags |= ATA_TFLAG_WRITE; - } - if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - if (lba48) { - tf->hob_nsect = scsicmd[7]; - tf->hob_lbal = scsicmd[2]; + /* Calculate the SCSI LBA and transfer length. */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + scsi_10_lba_len(scsicmd, &block, &n_block); + break; + case READ_6: + case WRITE_6: + scsi_6_lba_len(scsicmd, &block, &n_block); - qc->nsect = ((unsigned int)scsicmd[7] << 8) | - scsicmd[8]; - } else { - /* if we don't support LBA48 addressing, the request - * -may- be too large. */ - if ((scsicmd[2] & 0xf0) || scsicmd[7]) - return 1; + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ + if (!n_block) + n_block = 256; + break; + case READ_16: + case WRITE_16: + scsi_16_lba_len(scsicmd, &block, &n_block); + break; + default: + DPRINTK("no-byte command\n"); + goto invalid_fld; + } - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[2]; + /* Check and compose ATA command */ + if (!n_block) + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + */ + goto nothing_to_do; - qc->nsect = scsicmd[8]; - } + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; - tf->nsect = scsicmd[8]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[4]; - tf->lbah = scsicmd[3]; + if (dev->flags & ATA_DFLAG_LBA48) { + /* The request -may- be too large for LBA48. */ + if ((block >> 48) || (n_block > 65536)) + goto out_of_range; - VPRINTK("ten-byte command\n"); - if (qc->nsect == 0) /* we don't support length==0 cmds */ - return 1; - return 0; - } + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; - if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - qc->nsect = tf->nsect = scsicmd[4]; - if (!qc->nsect) { - qc->nsect = 256; - if (lba48) - tf->hob_nsect = 1; - } + tf->hob_nsect = (n_block >> 8) & 0xff; - tf->lbal = scsicmd[3]; - tf->lbam = scsicmd[2]; - tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + /* use LBA28 */ - VPRINTK("six-byte command\n"); - return 0; - } + /* The request -may- be too large for LBA28. */ + if ((block >> 28) || (n_block > 256)) + goto out_of_range; - if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - /* rule out impossible LBAs and sector counts */ - if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11]) - return 1; + tf->device |= (block >> 24) & 0xf; + } - if (lba48) { - tf->hob_nsect = scsicmd[12]; - tf->hob_lbal = scsicmd[6]; - tf->hob_lbam = scsicmd[5]; - tf->hob_lbah = scsicmd[4]; + ata_rwcmd_protocol(qc); - qc->nsect = ((unsigned int)scsicmd[12] << 8) | - scsicmd[13]; - } else { - /* once again, filter out impossible non-zero values */ - if (scsicmd[4] || scsicmd[5] || scsicmd[12] || - (scsicmd[6] & 0xf0)) - return 1; + qc->nsect = n_block; + tf->nsect = n_block & 0xff; - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[6]; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; - qc->nsect = scsicmd[13]; - } + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if ((block >> 28) || (n_block > 256)) + goto out_of_range; + + ata_rwcmd_protocol(qc); + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } - tf->nsect = scsicmd[13]; - tf->lbal = scsicmd[9]; - tf->lbam = scsicmd[8]; - tf->lbah = scsicmd[7]; + return 0; - VPRINTK("sixteen-byte command\n"); - if (qc->nsect == 0) /* we don't support length==0 cmds */ - return 1; - return 0; - } +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; - DPRINTK("no-byte command\n"); +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; return 1; } @@ -731,6 +897,12 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * This function sets up an ata_queued_cmd structure for the * SCSI command, and sends that ata_queued_cmd to the hardware. * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -747,7 +919,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc = ata_scsi_qc_new(ap, dev, cmd, done); if (!qc) - return; + goto err_mem; /* data is present; dma-map it */ if (cmd->sc_data_direction == DMA_FROM_DEVICE || @@ -755,7 +927,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); - goto err_out; + goto err_did; } if (cmd->use_sg) @@ -770,19 +942,28 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc->complete_fn = ata_scsi_qc_complete; if (xlat_func(qc, scsicmd)) - goto err_out; + goto early_finish; /* select device, send command to hardware */ if (ata_qc_issue(qc)) - goto err_out; + goto err_did; VPRINTK("EXIT\n"); return; -err_out: +early_finish: + ata_qc_free(qc); + done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return; + +err_did: ata_qc_free(qc); - ata_bad_cdb(cmd, done); - DPRINTK("EXIT - badcmd\n"); +err_mem: + cmd->result = (DID_ERROR << 16); + done(cmd); + DPRINTK("EXIT - internal\n"); + return; } /** @@ -849,7 +1030,8 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) * Mapping the response buffer, calling the command's handler, * and handling the handler's return value. This return value * indicates whether the handler wishes the SCSI command to be - * completed successfully, or not. + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -868,12 +1050,9 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); - if (rc) - ata_bad_cdb(cmd, args->done); - else { + if (rc == 0) cmd->result = SAM_STAT_GOOD; - args->done(cmd); - } + args->done(cmd); } /** @@ -1179,8 +1358,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, * in the same manner) */ page_control = scsicmd[2] >> 6; - if ((page_control != 0) && (page_control != 3)) - return 1; + switch (page_control) { + case 0: /* current */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + case 1: /* changeable */ + case 2: /* defaults */ + default: + goto invalid_fld; + } if (six_byte) output_len = 4; @@ -1211,7 +1398,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, break; default: /* invalid page code */ - return 1; + goto invalid_fld; } if (six_byte) { @@ -1224,6 +1411,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, } return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; } /** @@ -1246,10 +1443,20 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, VPRINTK("ENTER\n"); - if (ata_id_has_lba48(args->id)) - n_sectors = ata_id_u64(args->id, 100); - else - n_sectors = ata_id_u32(args->id, 60); + if (ata_id_has_lba(args->id)) { + if (ata_id_has_lba48(args->id)) + n_sectors = ata_id_u64(args->id, 100); + else + n_sectors = ata_id_u32(args->id, 60); + } else { + /* CHS default translation */ + n_sectors = args->id[1] * args->id[3] * args->id[6]; + + if (ata_id_current_chs_valid(args->id)) + /* CHS current translation */ + n_sectors = ata_id_u32(args->id, 57); + } + n_sectors--; /* ATA TotalUserSectors - 1 */ if (args->cmd->cmnd[0] == READ_CAPACITY) { @@ -1313,6 +1520,34 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, } /** + * ata_scsi_set_sense - Set SCSI sense data and status + * @cmd: SCSI request to be handled + * @sk: SCSI-defined sense key + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that builds a valid fixed format, current + * response code and the given sense key (sk), additional sense + * code (asc) and additional sense code qualifier (ascq) with + * a SCSI command status of %SAM_STAT_CHECK_CONDITION and + * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . + * + * LOCKING: + * Not required + */ + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + +/** * ata_scsi_badcmd - End a SCSI request with an error * @cmd: SCSI request to be handled * @done: SCSI command completion function @@ -1330,30 +1565,84 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = SAM_STAT_CHECK_CONDITION; - - cmd->sense_buffer[0] = 0x70; - cmd->sense_buffer[2] = ILLEGAL_REQUEST; - cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */ - cmd->sense_buffer[12] = asc; - cmd->sense_buffer[13] = ascq; + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); done(cmd); } +void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + DPRINTK("ATAPI request sense\n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + /* FIXME: is this needed? */ + memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, ap->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) { + VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); + + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) + ata_to_sense_error(qc, drv_stat); + + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); + /* FIXME: command completion with check condition + * but no sense causes the error handler to run, + * which then issues REQUEST SENSE, fills in the sense + * buffer, and completes the command (for the second + * time). We need to issue REQUEST SENSE some other + * way, to avoid completing the command twice. + */ cmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); return 1; - } else { + } + + else { u8 *scsicmd = cmd->cmnd; if (scsicmd[0] == INQUIRY) { @@ -1361,15 +1650,30 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) unsigned int buflen; buflen = ata_scsi_rbuf_get(cmd, &buf); - buf[2] = 0x5; - buf[3] = (buf[3] & 0xf0) | 2; + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + /* FIXME: do we ever override EVPD pages and the like, with + * this code? + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + ata_scsi_rbuf_put(cmd, buf); } + cmd->result = SAM_STAT_GOOD; } qc->scsidone(cmd); - return 0; } /** @@ -1384,7 +1688,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * Zero on success, non-zero on failure. */ -static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; @@ -1453,7 +1757,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) */ static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev) +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { struct ata_device *dev; @@ -1610,7 +1914,7 @@ void ata_scsi_simulate(u16 *id, void (*done)(struct scsi_cmnd *)) { struct ata_scsi_args args; - u8 *scsicmd = cmd->cmnd; + const u8 *scsicmd = cmd->cmnd; args.id = id; args.cmd = cmd; @@ -1630,7 +1934,7 @@ void ata_scsi_simulate(u16 *id, case INQUIRY: if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); else if (scsicmd[2] == 0x00) @@ -1640,7 +1944,7 @@ void ata_scsi_simulate(u16 *id, else if (scsicmd[2] == 0x83) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case MODE_SENSE: @@ -1650,7 +1954,7 @@ void ata_scsi_simulate(u16 *id, case MODE_SELECT: /* unconditionally return */ case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case READ_CAPACITY: @@ -1661,7 +1965,7 @@ void ata_scsi_simulate(u16 *id, if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case REPORT_LUNS: @@ -1673,8 +1977,26 @@ void ata_scsi_simulate(u16 *id, /* all other commands */ default: - ata_bad_scsiop(cmd, done); + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); break; } } +void ata_scsi_scan_host(struct ata_port *ap) +{ + struct ata_device *dev; + unsigned int i; + + if (ap->flags & ATA_FLAG_PORT_DISABLED) + return; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_present(dev)) + scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); + } +} + diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d608b3a0f6fe..3d60190584ba 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -39,18 +39,23 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; +extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); +extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); -extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); /* libata-scsi.c */ +extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd); +extern void ata_scsi_scan_host(struct ata_port *ap); extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, @@ -76,18 +81,10 @@ extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq); +extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, + u8 sk, u8 asc, u8 ascq); extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); -static inline void ata_bad_scsiop(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x20, 0x00); -} - -static inline void ata_bad_cdb(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x24, 0x00); -} - #endif /* __LIBATA_H__ */ diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 0aba13ceaacf..352df47bcaca 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -39,7 +39,7 @@ #define LPFC_MEM_POOL_SIZE 64 /* max elem in non-DMA safety pool */ static void * -lpfc_pool_kmalloc(unsigned int gfp_flags, void *data) +lpfc_pool_kmalloc(gfp_t gfp_flags, void *data) { return kmalloc((unsigned long)data, gfp_flags); } diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 0bb60de0bded..172839fce0eb 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5146,7 +5146,8 @@ static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned /* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */ static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg ) { - int i, priority; + int i; + gfp_t priority; struct osst_buffer *tb; if (from_initialization) @@ -5178,7 +5179,8 @@ static struct osst_buffer * new_tape_buffer( int from_initialization, int need_d /* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */ static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) { - int segs, nbr, max_segs, b_size, priority, order, got; + int segs, nbr, max_segs, b_size, order, got; + gfp_t priority; if (STbuffer->buffer_size >= OS_FRAME_SIZE) return 1; diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c new file mode 100644 index 000000000000..9820f272f889 --- /dev/null +++ b/drivers/scsi/pdc_adma.c @@ -0,0 +1,739 @@ +/* + * pdc_adma.c - Pacific Digital Corporation ADMA + * + * Maintained by: Mark Lord <mlord@pobox.com> + * + * Copyright 2005 Mark Lord + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * + * Supports ATA disks in single-packet ADMA mode. + * Uses PIO for everything else. + * + * TODO: Use ADMA transfers for ATAPI devices, when possible. + * This requires careful attention to a number of quirks of the chip. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include "scsi.h" +#include <scsi/scsi_host.h> +#include <asm/io.h> +#include <linux/libata.h> + +#define DRV_NAME "pdc_adma" +#define DRV_VERSION "0.01" + +/* macro to calculate base address for ATA regs */ +#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) + +/* macro to calculate base address for ADMA regs */ +#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) + +enum { + ADMA_PORTS = 2, + ADMA_CPB_BYTES = 40, + ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, + ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, + + ADMA_DMA_BOUNDARY = 0xffffffff, + + /* global register offsets */ + ADMA_MODE_LOCK = 0x00c7, + + /* per-channel register offsets */ + ADMA_CONTROL = 0x0000, /* ADMA control */ + ADMA_STATUS = 0x0002, /* ADMA status */ + ADMA_CPB_COUNT = 0x0004, /* CPB count */ + ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ + ADMA_CPB_NEXT = 0x000c, /* next CPB address */ + ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ + ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ + ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ + + /* ADMA_CONTROL register bits */ + aNIEN = (1 << 8), /* irq mask: 1==masked */ + aGO = (1 << 7), /* packet trigger ("Go!") */ + aRSTADM = (1 << 5), /* ADMA logic reset */ + aRSTA = (1 << 2), /* ATA hard reset */ + aPIOMD4 = 0x0003, /* PIO mode 4 */ + + /* ADMA_STATUS register bits */ + aPSD = (1 << 6), + aUIRQ = (1 << 4), + aPERR = (1 << 0), + + /* CPB bits */ + cDONE = (1 << 0), + cVLD = (1 << 0), + cDAT = (1 << 2), + cIEN = (1 << 3), + + /* PRD bits */ + pORD = (1 << 4), + pDIRO = (1 << 5), + pEND = (1 << 7), + + /* ATA register flags */ + rIGN = (1 << 5), + rEND = (1 << 7), + + /* ATA register addresses */ + ADMA_REGS_CONTROL = 0x0e, + ADMA_REGS_SECTOR_COUNT = 0x12, + ADMA_REGS_LBA_LOW = 0x13, + ADMA_REGS_LBA_MID = 0x14, + ADMA_REGS_LBA_HIGH = 0x15, + ADMA_REGS_DEVICE = 0x16, + ADMA_REGS_COMMAND = 0x17, + + /* PCI device IDs */ + board_1841_idx = 0, /* ADMA 2-port controller */ +}; + +typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; + +struct adma_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + adma_state_t state; +}; + +static int adma_ata_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); +static irqreturn_t adma_intr (int irq, void *dev_instance, + struct pt_regs *regs); +static int adma_port_start(struct ata_port *ap); +static void adma_host_stop(struct ata_host_set *host_set); +static void adma_port_stop(struct ata_port *ap); +static void adma_phy_reset(struct ata_port *ap); +static void adma_qc_prep(struct ata_queued_cmd *qc); +static int adma_qc_issue(struct ata_queued_cmd *qc); +static int adma_check_atapi_dma(struct ata_queued_cmd *qc); +static void adma_bmdma_stop(struct ata_queued_cmd *qc); +static u8 adma_bmdma_status(struct ata_port *ap); +static void adma_irq_clear(struct ata_port *ap); +static void adma_eng_timeout(struct ata_port *ap); + +static Scsi_Host_Template adma_ata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ENABLE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ADMA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations adma_ata_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .check_atapi_dma = adma_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = adma_phy_reset, + .qc_prep = adma_qc_prep, + .qc_issue = adma_qc_issue, + .eng_timeout = adma_eng_timeout, + .irq_handler = adma_intr, + .irq_clear = adma_irq_clear, + .port_start = adma_port_start, + .port_stop = adma_port_stop, + .host_stop = adma_host_stop, + .bmdma_stop = adma_bmdma_stop, + .bmdma_status = adma_bmdma_status, +}; + +static struct ata_port_info adma_port_info[] = { + /* board_1841_idx */ + { + .sht = &adma_ata_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, + .pio_mask = 0x10, /* pio4 */ + .udma_mask = 0x1f, /* udma0-4 */ + .port_ops = &adma_ata_ops, + }, +}; + +static struct pci_device_id adma_ata_pci_tbl[] = { + { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_1841_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver adma_ata_pci_driver = { + .name = DRV_NAME, + .id_table = adma_ata_pci_tbl, + .probe = adma_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int adma_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not yet supported */ +} + +static void adma_bmdma_stop(struct ata_queued_cmd *qc) +{ + /* nothing */ +} + +static u8 adma_bmdma_status(struct ata_port *ap) +{ + return 0; +} + +static void adma_irq_clear(struct ata_port *ap) +{ + /* nothing */ +} + +static void adma_reset_engine(void __iomem *chan) +{ + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_reinit_engine(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr); + ata_check_status(ap); + + /* reset the ADMA engine */ + adma_reset_engine(chan); + + /* set in-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_IN); + + /* set CPB pointer */ + writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); + + /* set out-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_OUT); + + /* set CPB count */ + writew(1, chan + ADMA_CPB_COUNT); + + /* read/discard ADMA status */ + readb(chan + ADMA_STATUS); +} + +static inline void adma_enter_reg_mode(struct ata_port *ap) +{ + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + writew(aPIOMD4, chan + ADMA_CONTROL); + readb(chan + ADMA_STATUS); /* flush */ +} + +static void adma_phy_reset(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + pp->state = adma_state_idle; + adma_reinit_engine(ap); + ata_port_probe(ap); + ata_bus_reset(ap); +} + +static void adma_eng_timeout(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + if (pp->state != adma_state_idle) /* healthy paranoia */ + pp->state = adma_state_mmio; + adma_reinit_engine(ap); + ata_eng_timeout(ap); +} + +static int adma_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg = qc->sg; + struct ata_port *ap = qc->ap; + struct adma_port_priv *pp = ap->private_data; + u8 *buf = pp->pkt; + int nelem, i = (2 + buf[3]) * 8; + u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + + for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) { + u32 addr; + u32 len; + + addr = (u32)sg_dma_address(sg); + *(__le32 *)(buf + i) = cpu_to_le32(addr); + i += 4; + + len = sg_dma_len(sg) >> 3; + *(__le32 *)(buf + i) = cpu_to_le32(len); + i += 4; + + if ((nelem + 1) == qc->n_elem) + pFLAGS |= pEND; + buf[i++] = pFLAGS; + buf[i++] = qc->dev->dma_mode & 0xf; + buf[i++] = 0; /* pPKLW */ + buf[i++] = 0; /* reserved */ + + *(__le32 *)(buf + i) + = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); + i += 4; + + VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", nelem, + (unsigned long)addr, len); + } + return i; +} + +static void adma_qc_prep(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + u8 *buf = pp->pkt; + u32 pkt_dma = (u32)pp->pkt_dma; + int i = 0; + + VPRINTK("ENTER\n"); + + adma_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) { + ata_qc_prep(qc); + return; + } + + buf[i++] = 0; /* Response flags */ + buf[i++] = 0; /* reserved */ + buf[i++] = cVLD | cDAT | cIEN; + i++; /* cLEN, gets filled in below */ + + *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ + i += 4; /* cNCPB */ + i += 4; /* cPRD, gets filled in below */ + + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + + /* ATA registers; must be a multiple of 4 */ + buf[i++] = qc->tf.device; + buf[i++] = ADMA_REGS_DEVICE; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) { + buf[i++] = qc->tf.hob_nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.hob_lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.hob_lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.hob_lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + } + buf[i++] = qc->tf.nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + buf[i++] = 0; + buf[i++] = ADMA_REGS_CONTROL; + buf[i++] = rIGN; + buf[i++] = 0; + buf[i++] = qc->tf.command; + buf[i++] = ADMA_REGS_COMMAND | rEND; + + buf[3] = (i >> 3) - 2; /* cLEN */ + *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ + + i = adma_fill_sg(qc); + wmb(); /* flush PRDs and pkt to memory */ +#if 0 + /* dump out CPB + PRDs for debug */ + { + int j, len = 0; + static char obuf[2048]; + for (j = 0; j < i; ++j) { + len += sprintf(obuf+len, "%02x ", buf[j]); + if ((j & 7) == 7) { + printk("%s\n", obuf); + len = 0; + } + } + if (len) + printk("%s\n", obuf); + } +#endif +} + +static inline void adma_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + VPRINTK("ENTER, ap %p\n", ap); + + /* fire up the ADMA engine */ + writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); +} + +static int adma_qc_issue(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pp->state = adma_state_pkt; + adma_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = adma_state_mmio; + return ata_qc_issue_prot(qc); +} + +static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + u8 __iomem *mmio_base = host_set->mmio_base; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap = host_set->ports[port_no]; + struct adma_port_priv *pp; + struct ata_queued_cmd *qc; + void __iomem *chan = ADMA_REGS(mmio_base, port_no); + u8 drv_stat, status = readb(chan + ADMA_STATUS); + + if (status == 0) + continue; + handled = 1; + adma_enter_reg_mode(ap); + if ((ap->flags & ATA_FLAG_PORT_DISABLED)) + continue; + pp = ap->private_data; + if (!pp || pp->state != adma_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + drv_stat = 0; + if ((status & (aPERR | aPSD | aUIRQ))) + drv_stat = ATA_ERR; + else if (pp->pkt[0] != cDONE) + drv_stat = ATA_ERR; + ata_qc_complete(qc, drv_stat); + } + return handled; +} + +static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap; + ap = host_set->ports[port_no]; + if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) { + struct ata_queued_cmd *qc; + struct adma_port_priv *pp = ap->private_data; + if (!pp || pp->state != adma_state_mmio) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + + /* check main status, clearing INTRQ */ + u8 status = ata_chk_status(ap); + if ((status & ATA_BUSY)) + continue; + DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, status); + + /* complete taskfile transaction */ + pp->state = adma_state_idle; + ata_qc_complete(qc, status); + handled = 1; + } + } + } + return handled; +} + +static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + spin_lock(&host_set->lock); + handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base + 0x000; + port->error_addr = + port->feature_addr = base + 0x004; + port->nsect_addr = base + 0x008; + port->lbal_addr = base + 0x00c; + port->lbam_addr = base + 0x010; + port->lbah_addr = base + 0x014; + port->device_addr = base + 0x018; + port->status_addr = + port->command_addr = base + 0x01c; + port->altstatus_addr = + port->ctl_addr = base + 0x038; +} + +static int adma_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + adma_enter_reg_mode(ap); + rc = -ENOMEM; + pp = kcalloc(1, sizeof(*pp), GFP_KERNEL); + if (!pp) + goto err_out; + pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) + goto err_out_kfree; + /* paranoia? */ + if ((pp->pkt_dma & 7) != 0) { + printk("bad alignment for pp->pkt_dma: %08x\n", + (u32)pp->pkt_dma); + goto err_out_kfree2; + } + memset(pp->pkt, 0, ADMA_PKT_BYTES); + ap->private_data = pp; + adma_reinit_engine(ap); + return 0; + +err_out_kfree2: + kfree(pp); +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + +static void adma_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp = ap->private_data; + + adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); + if (pp != NULL) { + ap->private_data = NULL; + if (pp->pkt != NULL) + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + kfree(pp); + } + ata_port_stop(ap); +} + +static void adma_host_stop(struct ata_host_set *host_set) +{ + unsigned int port_no; + + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); + + ata_pci_host_stop(host_set); +} + +static void adma_host_init(unsigned int chip_id, + struct ata_probe_ent *probe_ent) +{ + unsigned int port_no; + void __iomem *mmio_base = probe_ent->mmio_base; + + /* enable/lock aGO operation */ + writeb(7, mmio_base + ADMA_MODE_LOCK); + + /* reset the ADMA logic */ + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(mmio_base, port_no)); +} + +static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + int rc; + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + return rc; + } + return 0; +} + +static int adma_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int rc, port_no; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { + rc = -ENODEV; + goto err_out_regions; + } + + mmio_base = pci_iomap(pdev, 4, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + rc = adma_set_dma_masks(pdev, mmio_base); + if (rc) + goto err_out_iounmap; + + probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_iounmap; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = adma_port_info[board_idx].sht; + probe_ent->host_flags = adma_port_info[board_idx].host_flags; + probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; + probe_ent->port_ops = adma_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + probe_ent->n_ports = ADMA_PORTS; + + for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { + adma_ata_setup_port(&probe_ent->port[port_no], + ADMA_ATA_REGS((unsigned long)mmio_base, port_no)); + } + + pci_set_master(pdev); + + /* initialize adapter */ + adma_host_init(board_idx, probe_ent); + + rc = ata_device_add(probe_ent); + kfree(probe_ent); + if (rc != ADMA_PORTS) + goto err_out_iounmap; + return 0; + +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +static int __init adma_ata_init(void) +{ + return pci_module_init(&adma_ata_pci_driver); +} + +static void __exit adma_ata_exit(void) +{ + pci_unregister_driver(&adma_ata_pci_driver); +} + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(adma_ata_init); +module_exit(adma_ata_exit); diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 1ed32e7b5472..e451941ad81d 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -52,7 +52,7 @@ extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *); extern int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *); -extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, int); +extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t); extern int qla2x00_loop_resync(scsi_qla_host_t *); @@ -277,7 +277,7 @@ extern int qla2x00_fdmi_register(scsi_qla_host_t *); /* * Global Function Prototypes in qla_rscn.c source file. */ -extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, int); +extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, gfp_t); extern int qla2x00_handle_port_rscn(scsi_qla_host_t *, uint32_t, fc_port_t *, int); extern void qla2x00_process_iodesc(scsi_qla_host_t *, struct mbx_entry *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 23d095d3817b..fbb6feee40cf 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1685,7 +1685,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) * Returns a pointer to the allocated fcport, or NULL, if none available. */ fc_port_t * -qla2x00_alloc_fcport(scsi_qla_host_t *ha, int flags) +qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags) { fc_port_t *fcport; diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c index 1eba98828636..7534efcc8918 100644 --- a/drivers/scsi/qla2xxx/qla_rscn.c +++ b/drivers/scsi/qla2xxx/qla_rscn.c @@ -1066,7 +1066,7 @@ qla2x00_send_login_iocb_cb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, * Returns a pointer to the allocated RSCN fcport, or NULL, if none available. */ fc_port_t * -qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, int flags) +qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, gfp_t flags) { fc_port_t *fcport; diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ea76fe44585e..422e0b6f603a 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include <asm/io.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.12" +#define DRV_VERSION "0.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -55,31 +55,61 @@ enum { MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - MV_Q_CT = 32, - MV_CRQB_SZ = 32, - MV_CRPB_SZ = 8, + MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - MV_DMA_BOUNDARY = 0xffffffffU, - SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)), + MV_MAX_Q_DEPTH = 32, + MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, + + /* CRQB needs alignment on a 1KB boundary. Size == 1KB + * CRPB needs alignment on a 256B boundary. Size == 256B + * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB + * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B + */ + MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), + MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), + MV_MAX_SG_CT = 176, + MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), + MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), + + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, - /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */ + /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ MV_PORT_MASK = 3, /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_FLAG_BDMA = (1 << 28), /* Basic DMA */ + MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ + MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), + MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | + MV_FLAG_GLBL_SFT_RST), chip_504x = 0, chip_508x = 1, chip_604x = 2, chip_608x = 3, + CRQB_FLAG_READ = (1 << 0), + CRQB_TAG_SHIFT = 1, + CRQB_CMD_ADDR_SHIFT = 8, + CRQB_CMD_CS = (0x2 << 11), + CRQB_CMD_LAST = (1 << 15), + + CRPB_FLAG_STATUS_SHIFT = 8, + + EPRD_FLAG_END_OF_TBL = (1 << 31), + /* PCI interface registers */ + PCI_COMMAND_OFS = 0xc00, + PCI_MAIN_CMD_STS_OFS = 0xd30, STOP_PCI_MASTER = (1 << 2), PCI_MASTER_EMPTY = (1 << 3), @@ -111,20 +141,13 @@ enum { HC_CFG_OFS = 0, HC_IRQ_CAUSE_OFS = 0x14, - CRBP_DMA_DONE = (1 << 0), /* shift by port # */ + CRPB_DMA_DONE = (1 << 0), /* shift by port # */ HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ /* Shadow block registers */ - SHD_PIO_DATA_OFS = 0x100, - SHD_FEA_ERR_OFS = 0x104, - SHD_SECT_CNT_OFS = 0x108, - SHD_LBA_L_OFS = 0x10C, - SHD_LBA_M_OFS = 0x110, - SHD_LBA_H_OFS = 0x114, - SHD_DEV_HD_OFS = 0x118, - SHD_CMD_STA_OFS = 0x11C, - SHD_CTL_AST_OFS = 0x120, + SHD_BLK_OFS = 0x100, + SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ @@ -132,6 +155,11 @@ enum { /* Port registers */ EDMA_CFG_OFS = 0, + EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ + EDMA_CFG_NCQ = (1 << 5), + EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ + EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ + EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ EDMA_ERR_IRQ_CAUSE_OFS = 0x8, EDMA_ERR_IRQ_MASK_OFS = 0xc, @@ -161,33 +189,85 @@ enum { EDMA_ERR_LNK_DATA_TX | EDMA_ERR_TRANS_PROTO), + EDMA_REQ_Q_BASE_HI_OFS = 0x10, + EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_REQ_Q_OUT_PTR_OFS = 0x18, + EDMA_REQ_Q_PTR_SHIFT = 5, + + EDMA_RSP_Q_BASE_HI_OFS = 0x1c, + EDMA_RSP_Q_IN_PTR_OFS = 0x20, + EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, + EDMA_RSP_Q_PTR_SHIFT = 3, + EDMA_CMD_OFS = 0x28, EDMA_EN = (1 << 0), EDMA_DS = (1 << 1), ATA_RST = (1 << 2), - /* BDMA is 6xxx part only */ - BDMA_CMD_OFS = 0x224, - BDMA_START = (1 << 0), + /* Host private flags (hp_flags) */ + MV_HP_FLAG_MSI = (1 << 0), - MV_UNDEF = 0, + /* Port private flags (pp_flags) */ + MV_PP_FLAG_EDMA_EN = (1 << 0), + MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; -struct mv_port_priv { +/* Command ReQuest Block: 32B */ +struct mv_crqb { + u32 sg_addr; + u32 sg_addr_hi; + u16 ctrl_flags; + u16 ata_cmd[11]; +}; +/* Command ResPonse Block: 8B */ +struct mv_crpb { + u16 id; + u16 flags; + u32 tmstmp; }; -struct mv_host_priv { +/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ +struct mv_sg { + u32 addr; + u32 flags_size; + u32 addr_hi; + u32 reserved; +}; +struct mv_port_priv { + struct mv_crqb *crqb; + dma_addr_t crqb_dma; + struct mv_crpb *crpb; + dma_addr_t crpb_dma; + struct mv_sg *sg_tbl; + dma_addr_t sg_tbl_dma; + + unsigned req_producer; /* cp of req_in_ptr */ + unsigned rsp_consumer; /* cp of rsp_out_ptr */ + u32 pp_flags; +}; + +struct mv_host_priv { + u32 hp_flags; }; static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static u8 mv_check_err(struct ata_port *ap); static void mv_phy_reset(struct ata_port *ap); -static int mv_master_reset(void __iomem *mmio_base); +static void mv_host_stop(struct ata_host_set *host_set); +static int mv_port_start(struct ata_port *ap); +static void mv_port_stop(struct ata_port *ap); +static void mv_qc_prep(struct ata_queued_cmd *qc); +static int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static Scsi_Host_Template mv_sht = { @@ -196,13 +276,13 @@ static Scsi_Host_Template mv_sht = { .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .eh_strategy_handler = ata_scsi_error, - .can_queue = ATA_DEF_QUEUE, + .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_UNDEF, + .sg_tablesize = MV_MAX_SG_CT, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, - .use_clustering = MV_UNDEF, + .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = MV_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, @@ -210,21 +290,22 @@ static Scsi_Host_Template mv_sht = { .ordered_flush = 1, }; -static struct ata_port_operations mv_ops = { +static const struct ata_port_operations mv_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, + .check_err = mv_check_err, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .phy_reset = mv_phy_reset, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, - .eng_timeout = ata_eng_timeout, + .eng_timeout = mv_eng_timeout, .irq_handler = mv_interrupt, .irq_clear = mv_irq_clear, @@ -232,46 +313,39 @@ static struct ata_port_operations mv_ops = { .scr_read = mv_scr_read, .scr_write = mv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, }; static struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = MV_COMMON_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_508x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_604x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC | - MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, }; @@ -306,12 +380,6 @@ static inline void writelfl(unsigned long data, void __iomem *addr) (void) readl(addr); /* flush to avoid PCI posted write */ } -static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio) -{ - return ((void __iomem *)((unsigned long)port_mmio & - (unsigned long)SATAHC_MASK)); -} - static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) { return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); @@ -329,24 +397,150 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap) return mv_port_base(ap->host_set->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long flags) +static inline int mv_get_hc_count(unsigned long hp_flags) { - return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1); + return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } -static inline int mv_is_edma_active(struct ata_port *ap) +static void mv_irq_clear(struct ata_port *ap) +{ +} + +/** + * mv_start_dma - Enable eDMA engine + * @base: port base address + * @pp: port private data + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) +{ + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + } + assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); +} + +/** + * mv_stop_dma - Disable eDMA engine + * @ap: ATA channel to manipulate + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); - return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + struct mv_port_priv *pp = ap->private_data; + u32 reg; + int i; + + if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { + /* Disable EDMA if active. The disable bit auto clears. + */ + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } else { + assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); + } + + /* now properly wait for the eDMA to stop */ + for (i = 1000; i > 0; i--) { + reg = readl(port_mmio + EDMA_CMD_OFS); + if (!(EDMA_EN & reg)) { + break; + } + udelay(100); + } + + if (EDMA_EN & reg) { + printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + /* FIXME: Consider doing a reset here to recover */ + } } -static inline int mv_port_bdma_capable(struct ata_port *ap) +#ifdef ATA_DEBUG +static void mv_dump_mem(void __iomem *start, unsigned bytes) { - return (ap->flags & MV_FLAG_BDMA); + int b, w; + for (b = 0; b < bytes; ) { + DPRINTK("%p: ", start + b); + for (w = 0; b < bytes && w < 4; w++) { + printk("%08x ",readl(start + b)); + b += sizeof(u32); + } + printk("\n"); + } } +#endif -static void mv_irq_clear(struct ata_port *ap) +static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + u32 dw; + for (b = 0; b < bytes; ) { + DPRINTK("%02x: ", b); + for (w = 0; b < bytes && w < 4; w++) { + (void) pci_read_config_dword(pdev,b,&dw); + printk("%08x ",dw); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_all_regs(void __iomem *mmio_base, int port, + struct pci_dev *pdev) { +#ifdef ATA_DEBUG + void __iomem *hc_base = mv_hc_base(mmio_base, + port >> MV_PORT_HC_SHIFT); + void __iomem *port_base; + int start_port, num_ports, p, start_hc, num_hcs, hc; + + if (0 > port) { + start_hc = start_port = 0; + num_ports = 8; /* shld be benign for 4 port devs */ + num_hcs = 2; + } else { + start_hc = port >> MV_PORT_HC_SHIFT; + start_port = port; + num_ports = num_hcs = 1; + } + DPRINTK("All registers for port(s) %u-%u:\n", start_port, + num_ports > 1 ? num_ports - 1 : start_port); + + if (NULL != pdev) { + DPRINTK("PCI config space regs:\n"); + mv_dump_pci_cfg(pdev, 0x68); + } + DPRINTK("PCI regs:\n"); + mv_dump_mem(mmio_base+0xc00, 0x3c); + mv_dump_mem(mmio_base+0xd00, 0x34); + mv_dump_mem(mmio_base+0xf00, 0x4); + mv_dump_mem(mmio_base+0x1d00, 0x6c); + for (hc = start_hc; hc < start_hc + num_hcs; hc++) { + hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT); + DPRINTK("HC regs (HC %i):\n", hc); + mv_dump_mem(hc_base, 0x1c); + } + for (p = start_port; p < start_port + num_ports; p++) { + port_base = mv_port_base(mmio_base, p); + DPRINTK("EDMA regs (port %i):\n",p); + mv_dump_mem(port_base, 0x54); + DPRINTK("SATA regs (port %i):\n",p); + mv_dump_mem(port_base+0x300, 0x60); + } +#endif } static unsigned int mv_scr_offset(unsigned int sc_reg_in) @@ -389,30 +583,37 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -static int mv_master_reset(void __iomem *mmio_base) +/** + * mv_global_soft_reset - Perform the 6xxx global soft reset + * @mmio_base: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; int i, rc = 0; u32 t; - VPRINTK("ENTER\n"); - /* Following procedure defined in PCI "main command and status * register" table. */ t = readl(reg); writel(t | STOP_PCI_MASTER, reg); - for (i = 0; i < 100; i++) { - msleep(10); + for (i = 0; i < 1000; i++) { + udelay(1); t = readl(reg); if (PCI_MASTER_EMPTY & t) { break; } } if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME "PCI master won't flush\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; goto done; } @@ -425,39 +626,399 @@ static int mv_master_reset(void __iomem *mmio_base) } while (!(GLOB_SFT_RST & t) && (i-- > 0)); if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME "can't set global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; goto done; } - /* clear reset */ + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ i = 5; do { - writel(t & ~GLOB_SFT_RST, reg); + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); t = readl(reg); udelay(1); } while ((GLOB_SFT_RST & t) && (i-- > 0)); if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME "can't clear global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; } - - done: - VPRINTK("EXIT, rc = %i\n", rc); +done: return rc; } -static void mv_err_intr(struct ata_port *ap) +/** + * mv_host_stop - Host specific cleanup/stop routine. + * @host_set: host data structure + * + * Disable ints, cleanup host memory, call general purpose + * host_stop. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_host_stop(struct ata_host_set *host_set) { - void __iomem *port_mmio; - u32 edma_err_cause, serr = 0; + struct mv_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + if (hpriv->hp_flags & MV_HP_FLAG_MSI) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } + kfree(hpriv); + ata_host_stop(host_set); +} + +/** + * mv_port_start - Port specific init/start routine. + * @ap: ATA channel to manipulate + * + * Allocate and point to DMA memory, init port private memory, + * zero indices. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp; + void __iomem *port_mmio = mv_ap_base(ap); + void *mem; + dma_addr_t mem_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + return -ENOMEM; + } + memset(pp, 0, sizeof(*pp)); + + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) { + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, MV_PORT_PRIV_DMA_SZ); + + /* First item in chunk of DMA memory: + * 32-slot command request table (CRQB), 32 bytes each in size + */ + pp->crqb = mem; + pp->crqb_dma = mem_dma; + mem += MV_CRQB_Q_SZ; + mem_dma += MV_CRQB_Q_SZ; + + /* Second item: + * 32-slot command response table (CRPB), 8 bytes each in size + */ + pp->crpb = mem; + pp->crpb_dma = mem_dma; + mem += MV_CRPB_Q_SZ; + mem_dma += MV_CRPB_Q_SZ; + + /* Third item: + * Table of scatter-gather descriptors (ePRD), 16 bytes each + */ + pp->sg_tbl = mem; + pp->sg_tbl_dma = mem_dma; + + writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | + EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); + + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + pp->req_producer = pp->rsp_consumer = 0; + + /* Don't turn on EDMA here...do it before DMA commands only. Else + * we'll be unable to send non-data, PIO, etc due to restricted access + * to shadow regs. + */ + ap->private_data = pp; + return 0; +} + +/** + * mv_port_stop - Port specific cleanup/stop routine. + * @ap: ATA channel to manipulate + * + * Stop DMA, cleanup port memory. + * + * LOCKING: + * This routine uses the host_set lock to protect the DMA stop. + */ +static void mv_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + mv_stop_dma(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + ap->private_data = NULL; + dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); + kfree(pp); +} + +/** + * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries + * @qc: queued command whose SG list to source from + * + * Populate the SG list and mark the last entry. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_fill_sg(struct ata_queued_cmd *qc) +{ + struct mv_port_priv *pp = qc->ap->private_data; + unsigned int i; + + for (i = 0; i < qc->n_elem; i++) { + u32 sg_len; + dma_addr_t addr; + + addr = sg_dma_address(&qc->sg[i]); + sg_len = sg_dma_len(&qc->sg[i]); + + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + assert(0 == (sg_len & ~MV_DMA_BOUNDARY)); + pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); + } + if (0 < qc->n_elem) { + pp->sg_tbl[qc->n_elem - 1].flags_size |= + cpu_to_le32(EPRD_FLAG_END_OF_TBL); + } +} + +static inline unsigned mv_inc_q_index(unsigned *index) +{ + *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK; + return *index; +} + +static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) +{ + *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + (last ? CRQB_CMD_LAST : 0); +} - /* bug here b/c we got an err int on a port we don't know about, - * so there's no way to clear it +/** + * mv_qc_prep - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + u16 *cw; + struct ata_taskfile *tf; + u16 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) { + return; + } + + /* the req producer index should be the same as we remember it */ + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + + /* Fill in command request block */ - BUG_ON(NULL == ap); - port_mmio = mv_ap_base(ap); + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + flags |= CRQB_FLAG_READ; + } + assert(MV_MAX_Q_DEPTH > qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + pp->crqb[pp->req_producer].sg_addr = + cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + pp->crqb[pp->req_producer].sg_addr_hi = + cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); + + cw = &pp->crqb[pp->req_producer].ata_cmd[0]; + tf = &qc->tf; + + /* Sadly, the CRQB cannot accomodate all registers--there are + * only 11 bytes...so we must pick and choose required + * registers based on the command. So, we drop feature and + * hob_feature for [RW] DMA commands, but they are needed for + * NCQ. NCQ will drop hob_nsect. + */ + switch (tf->command) { + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); + break; +#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_FPDMA_WRITE: + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); + break; +#endif /* FIXME: remove this line when NCQ added */ + default: + /* The only other commands EDMA supports in non-queued and + * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none + * of which are defined/used by Linux. If we get here, this + * driver needs work. + * + * FIXME: modify libata to give qc_prep a return value and + * return error here. + */ + BUG_ON(tf->command); + break; + } + mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); + mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) { + return; + } + mv_fill_sg(qc); +} + +/** + * mv_qc_issue - Initiate a command to the host + * @qc: queued command to start + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it sanity checks our local + * caches of the request producer/consumer indices then enables + * DMA and bumps the request producer index. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_qc_issue(struct ata_queued_cmd *qc) +{ + void __iomem *port_mmio = mv_ap_base(qc->ap); + struct mv_port_priv *pp = qc->ap->private_data; + u32 in_ptr; + + if (ATA_PROT_DMA != qc->tf.protocol) { + /* We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_dma(qc->ap); + return ata_qc_issue_prot(qc); + } + + in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + /* the req producer index should be the same as we remember it */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + /* until we do queuing, the queue should be empty at this point */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + + mv_inc_q_index(&pp->req_producer); /* now incr producer index */ + + mv_start_dma(port_mmio, pp); + + /* and write the request in pointer to kick the EDMA to life */ + in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; + in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT; + writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + return 0; +} + +/** + * mv_get_crpb_status - get status from most recently completed cmd + * @ap: ATA channel to manipulate + * + * This routine is for use when the port is in DMA mode, when it + * will be using the CRPB (command response block) method of + * returning command completion information. We assert indices + * are good, grab status, and bump the response consumer index to + * prove that we're up to date. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_get_crpb_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + u32 out_ptr; + + out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* the response consumer index should be the same as we remember it */ + assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* increment our consumer index... */ + pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); + + /* and, until we do NCQ, there should only be 1 CRPB waiting */ + assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* write out our inc'd consumer index so EDMA knows we're caught up */ + out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; + out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT; + writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* Return ATA status register for completed CRPB */ + return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); +} + +/** + * mv_err_intr - Handle error interrupts on the port + * @ap: ATA channel to manipulate + * + * In most cases, just clear the interrupt and move on. However, + * some cases require an eDMA reset, which is done right before + * the COMRESET in mv_phy_reset(). The SERR case requires a + * clear of pending errors in the SATA SERROR register. Finally, + * if the port disabled DMA, update our cached copy to match. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_err_intr(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 edma_err_cause, serr = 0; edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -465,8 +1026,12 @@ static void mv_err_intr(struct ata_port *ap) serr = scr_read(ap, SCR_ERROR); scr_write_flush(ap, SCR_ERROR, serr); } - DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n", - ap->port_no, edma_err_cause, serr); + if (EDMA_ERR_SELF_DIS & edma_err_cause) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " + "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); /* Clear EDMA now that SERR cleanup done */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -477,7 +1042,21 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC +/** + * mv_host_intr - Handle all interrupts on the given host controller + * @host_set: host specific structure + * @relevant: port error bits relevant to this host controller + * @hc: which host controller we're to look at + * + * Read then write clear the HC interrupt status then walk each + * port connected to the HC and see if it needs servicing. Port + * success ints are reported in the HC interrupt status reg, the + * port error ints are reported in the higher level main + * interrupt status register and thus are passed in via the + * 'relevant' argument. + * + * LOCKING: + * Inherited from caller. */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) @@ -487,8 +1066,8 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, struct ata_port *ap; struct ata_queued_cmd *qc; u32 hc_irq_cause; - int shift, port, port0, hard_port; - u8 ata_status; + int shift, port, port0, hard_port, handled; + u8 ata_status = 0; if (hc == 0) { port0 = 0; @@ -499,7 +1078,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* we'll need the HC success int register in most cases */ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); if (hc_irq_cause) { - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); } VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", @@ -508,35 +1087,38 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { ap = host_set->ports[port]; hard_port = port & MV_PORT_MASK; /* range 0-3 */ - ata_status = 0xffU; + handled = 0; /* ensure ata_status is set if handled++ */ - if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) { - BUG_ON(NULL == ap); - /* rcv'd new resp, basic DMA complete, or ATA IRQ */ - /* This is needed to clear the ATA INTRQ. - * FIXME: don't read the status reg in EDMA mode! + if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { + /* new CRPB on the queue; just one at a time until NCQ + */ + ata_status = mv_get_crpb_status(ap); + handled++; + } else if ((DEV_IRQ << hard_port) & hc_irq_cause) { + /* received ATA IRQ; read the status reg to clear INTRQ */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr); + handled++; } - shift = port * 2; + shift = port << 1; /* (port * 2) */ if (port >= MV_PORTS_PER_HC) { shift++; /* skip bit 8 in the HC Main IRQ reg */ } if ((PORT0_ERR << shift) & relevant) { mv_err_intr(ap); - /* FIXME: smart to OR in ATA_ERR? */ + /* OR in ATA_ERR to ensure libata knows we took one */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr) | ATA_ERR; + handled++; } - if (ap) { + if (handled && ap) { qc = ata_qc_from_tag(ap, ap->active_tag); if (NULL != qc) { VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); - BUG_ON(0xffU == ata_status); /* mark qc status appropriately */ ata_qc_complete(qc, ata_status); } @@ -545,17 +1127,30 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("EXIT\n"); } +/** + * mv_interrupt - + * @irq: unused + * @dev_instance: private data; in this case the host structure + * @regs: unused + * + * Read the read only register to determine if any host + * controllers have pending interrupts. If so, call lower level + * routine to handle. Also check for PCI errors which are only + * reported here. + * + * LOCKING: + * This routine holds the host_set lock while processing pending + * interrupts. + */ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio; + void __iomem *mmio = host_set->mmio_base; u32 irq_stat; - mmio = host_set->mmio_base; irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); /* check the cases where we either have nothing pending or have read * a bogus register value which can indicate HW removal or PCI fault @@ -564,64 +1159,105 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_NONE; } + n_hcs = mv_get_hc_count(host_set->ports[0]->flags); spin_lock(&host_set->lock); for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { mv_host_intr(host_set, relevant, hc); - handled = 1; + handled++; } } if (PCI_ERR & irq_stat) { - /* FIXME: these are all masked by default, but still need - * to recover from them properly. - */ - } + printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", + readl(mmio + PCI_IRQ_CAUSE_OFS)); + DPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + handled++; + } spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } +/** + * mv_check_err - Return the error shadow register to caller. + * @ap: ATA channel to manipulate + * + * Marvell requires DMA to be stopped before accessing shadow + * registers. So we do that, then return the needed register. + * + * LOCKING: + * Inherited from caller. FIXME: protect mv_stop_dma with lock? + */ +static u8 mv_check_err(struct ata_port *ap) +{ + mv_stop_dma(ap); /* can't read shadow regs if DMA on */ + return readb((void __iomem *) ap->ioaddr.error_addr); +} + +/** + * mv_phy_reset - Perform eDMA reset followed by COMRESET + * @ap: ATA channel to manipulate + * + * Part of this is taken from __sata_phy_reset and modified to + * not sleep since this routine gets called from interrupt level. + * + * LOCKING: + * Inherited from caller. This is coded to safe to call at + * interrupt level, i.e. it does not sleep. + */ static void mv_phy_reset(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; - u32 edma = 0, bdma; + unsigned long timeout; VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - edma = readl(port_mmio + EDMA_CMD_OFS); - if (EDMA_EN & edma) { - /* disable EDMA if active */ - edma &= ~EDMA_EN; - writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS); - udelay(1); - } else if (mv_port_bdma_capable(ap) && - (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) { - /* disable BDMA if active */ - writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS); - } + mv_stop_dma(ap); - writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); udelay(25); /* allow reset propagation */ /* Spec never mentions clearing the bit. Marvell's driver does * clear the bit, however. */ - writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(0, port_mmio + EDMA_CMD_OFS); - VPRINTK("Done. Now calling __sata_phy_reset()\n"); + VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); /* proceed to init communications via the scr_control reg */ - __sata_phy_reset(ap); + scr_write_flush(ap, SCR_CONTROL, 0x301); + mdelay(1); + scr_write_flush(ap, SCR_CONTROL, 0x300); + timeout = jiffies + (HZ * 1); + do { + mdelay(10); + if ((scr_read(ap, SCR_STATUS) & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); - if (ap->flags & ATA_FLAG_PORT_DISABLED) { - VPRINTK("Port disabled pre-sig. Exiting.\n"); + VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); + + if (sata_dev_present(ap)) { + ata_port_probe(ap); + } else { + printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", + ap->id, scr_read(ap, SCR_STATUS)); + ata_port_disable(ap); return; } + ap->cbl = ATA_CBL_SATA; tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); @@ -636,37 +1272,118 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } -static void mv_port_init(struct ata_ioports *port, unsigned long base) +/** + * mv_eng_timeout - Routine called by libata when SCSI times out I/O + * @ap: ATA channel to manipulate + * + * Intent is to clear all pending error conditions, reset the + * chip/bus, fail the command, and move on. + * + * LOCKING: + * This routine holds the host_set lock while failing the command. + */ +static void mv_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + + printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); + DPRINTK("All regs @ start of eng_timeout\n"); + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + to_pci_dev(ap->host_set->dev)); + + qc = ata_qc_from_tag(ap, ap->active_tag); + printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", + ap->host_set->mmio_base, ap, qc, qc->scsicmd, + &qc->scsicmd->cmnd); + + mv_err_intr(ap); + mv_phy_reset(ap); + + if (!qc) { + printk(KERN_ERR "ata%u: BUG: timeout without command\n", + ap->id); + } else { + /* hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } +} + +/** + * mv_port_init - Perform some early initialization on a single port. + * @port: libata data structure storing shadow register addresses + * @port_mmio: base address of the port + * + * Initialize shadow register mmio addresses, clear outstanding + * interrupts on the port, and unmask interrupts for the future + * start of the port. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { - /* PIO related setup */ - port->data_addr = base + SHD_PIO_DATA_OFS; - port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS; - port->nsect_addr = base + SHD_SECT_CNT_OFS; - port->lbal_addr = base + SHD_LBA_L_OFS; - port->lbam_addr = base + SHD_LBA_M_OFS; - port->lbah_addr = base + SHD_LBA_H_OFS; - port->device_addr = base + SHD_DEV_HD_OFS; - port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS; - port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS; - /* unused */ + unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; + unsigned serr_ofs; + + /* PIO related setup + */ + port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); + port->error_addr = + port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); + port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); + port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); + port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); + port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); + port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); + port->status_addr = + port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); + /* special case: control/altstatus doesn't have ATA_REG_ address */ + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; + + /* unused: */ port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + /* Clear any currently outstanding port interrupt conditions */ + serr_ofs = mv_scr_offset(SCR_ERROR); + writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + /* unmask all EDMA error interrupts */ - writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS); + writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl((void __iomem *)base + EDMA_CFG_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS)); + readl(port_mmio + EDMA_CFG_OFS), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), + readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +/** + * mv_host_init - Perform some early initialization of the host. + * @probe_ent: early data struct representing the host + * + * If possible, do an early global reset of the host. Then do + * our port init and clear/unmask all/relevant host interrupts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_host_init(struct ata_probe_ent *probe_ent) { int rc = 0, n_hc, port, hc; void __iomem *mmio = probe_ent->mmio_base; void __iomem *port_mmio; - if (mv_master_reset(probe_ent->mmio_base)) { + if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && + mv_global_soft_reset(probe_ent->mmio_base)) { rc = 1; goto done; } @@ -676,17 +1393,27 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) for (port = 0; port < probe_ent->n_ports; port++) { port_mmio = mv_port_base(mmio, port); - mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio); + mv_port_init(&probe_ent->port[port], port_mmio); } for (hc = 0; hc < n_hc; hc++) { - VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc, - readl(mv_hc_base(mmio, hc) + HC_CFG_OFS), - readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS)); + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " + "(before clear)=0x%08x\n", hc, + readl(hc_mmio + HC_CFG_OFS), + readl(hc_mmio + HC_IRQ_CAUSE_OFS)); + + /* Clear any currently outstanding hc interrupt conditions */ + writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); - writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + + /* and unmask interrupt generation for host regs */ + writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " "PCI int cause/mask=0x%08x/0x%08x\n", @@ -694,11 +1421,53 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), readl(mmio + PCI_IRQ_MASK_OFS)); - - done: +done: return rc; } +/** + * mv_print_info - Dump key info to kernel log for perusal. + * @probe_ent: early data struct representing the host + * + * FIXME: complete this. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_print_info(struct ata_probe_ent *probe_ent) +{ + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct mv_host_priv *hpriv = probe_ent->private_data; + u8 rev_id, scc; + const char *scc_s; + + /* Use this to determine the HW stepping of the chip so we know + * what errata to workaround + */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); + if (scc == 0) + scc_s = "SCSI"; + else if (scc == 0x01) + scc_s = "RAID"; + else + scc_s = "unknown"; + + printk(KERN_INFO DRV_NAME + "(%s) %u slots %u ports %s mode IRQ via %s\n", + pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); +} + +/** + * mv_init_one - handle a positive probe of a Marvell host + * @pdev: PCI device found + * @ent: PCI device ID entry for the matched host + * + * LOCKING: + * Inherited from caller. + */ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -706,16 +1475,12 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct mv_host_priv *hpriv; unsigned int board_idx = (unsigned int)ent->driver_data; void __iomem *mmio_base; - int pci_dev_busy = 0; - int rc; + int pci_dev_busy = 0, rc; if (!printed_version++) { - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n"); } - VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number, - PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); - rc = pci_enable_device(pdev); if (rc) { return rc; @@ -727,8 +1492,6 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out; } - pci_intx(pdev, 1); - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; @@ -739,8 +1502,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR), - pci_resource_len(pdev, MV_PRIMARY_BAR)); + mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -769,37 +1531,40 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { goto err_out_hpriv; } -/* mv_print_info(probe_ent); */ - { - int b, w; - u32 dw[4]; /* hold a line of 16b */ - VPRINTK("PCI config space:\n"); - for (b = 0; b < 0x40; ) { - for (w = 0; w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw[w]); - b += sizeof(*dw); - } - VPRINTK("%08x %08x %08x %08x\n", - dw[0],dw[1],dw[2],dw[3]); - } + /* Enable interrupts */ + if (pci_enable_msi(pdev) == 0) { + hpriv->hp_flags |= MV_HP_FLAG_MSI; + } else { + pci_intx(pdev, 1); } - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); + mv_dump_pci_cfg(pdev, 0x68); + mv_print_info(probe_ent); + + if (ata_device_add(probe_ent) == 0) { + rc = -ENODEV; /* No devices discovered */ + goto err_out_dev_add; + } + kfree(probe_ent); return 0; - err_out_hpriv: +err_out_dev_add: + if (MV_HP_FLAG_MSI & hpriv->hp_flags) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } +err_out_hpriv: kfree(hpriv); - err_out_iounmap: - iounmap(mmio_base); - err_out_free_ent: +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: kfree(probe_ent); - err_out_regions: +err_out_regions: pci_release_regions(pdev); - err_out: +err_out: if (!pci_dev_busy) { pci_disable_device(pdev); } diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index cb832b03ec5e..1a56d6c79ddd 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -238,7 +238,7 @@ static Scsi_Host_Template nv_sht = { .ordered_flush = 1, }; -static struct ata_port_operations nv_ops = { +static const struct ata_port_operations nv_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -331,7 +331,7 @@ static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) return 0xffffffffU; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -345,7 +345,7 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) return; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -405,7 +405,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; ppi = &nv_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) goto err_out_regions; diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 538ad727bd2e..eee93b0016df 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -87,8 +87,8 @@ static void pdc_port_stop(struct ata_port *ap); static void pdc_pata_phy_reset(struct ata_port *ap); static void pdc_sata_phy_reset(struct ata_port *ap); static void pdc_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); static int pdc_qc_issue_prot(struct ata_queued_cmd *qc); @@ -113,7 +113,7 @@ static Scsi_Host_Template pdc_ata_sht = { .ordered_flush = 1, }; -static struct ata_port_operations pdc_sata_ops = { +static const struct ata_port_operations pdc_sata_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -136,7 +136,7 @@ static struct ata_port_operations pdc_sata_ops = { .host_stop = ata_pci_host_stop, }; -static struct ata_port_operations pdc_pata_ops = { +static const struct ata_port_operations pdc_pata_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -324,7 +324,7 @@ static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -333,7 +333,7 @@ static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void pdc_qc_prep(struct ata_queued_cmd *qc) @@ -438,11 +438,11 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, break; default: - ap->stats.idle_irq++; - break; + ap->stats.idle_irq++; + break; } - return handled; + return handled; } static void pdc_irq_clear(struct ata_port *ap) @@ -523,8 +523,8 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) pp->pkt[2] = seq; wmb(); /* flush PRD, pkt writes */ - writel(pp->pkt_dma, (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ + writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ } static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) @@ -546,7 +546,7 @@ static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); @@ -554,7 +554,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) } -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index ffcdeb68641c..250dafa6bc36 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -51,8 +51,6 @@ enum { QS_PRD_BYTES = QS_MAX_PRD * 16, QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, - QS_DMA_BOUNDARY = ~0UL, - /* global register offsets */ QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ QS_HID_HPHY = 0x0004, /* host physical interface info */ @@ -101,6 +99,10 @@ enum { board_2068_idx = 0, /* QStor 4-port SATA/RAID */ }; +enum { + QS_DMA_BOUNDARY = ~0UL +}; + typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t; struct qs_port_priv { @@ -145,7 +147,7 @@ static Scsi_Host_Template qs_ata_sht = { .bios_param = ata_std_bios_param, }; -static struct ata_port_operations qs_ata_ops = { +static const struct ata_port_operations qs_ata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index ba98a175ee3a..3a056173fb95 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -150,7 +150,7 @@ static Scsi_Host_Template sil_sht = { .ordered_flush = 1, }; -static struct ata_port_operations sil_ops = { +static const struct ata_port_operations sil_ops = { .port_disable = ata_port_disable, .dev_config = sil_dev_config, .tf_load = ata_tf_load, @@ -289,7 +289,7 @@ static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_re static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) return readl(mmio); return 0xffffffffU; @@ -297,7 +297,7 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) writel(val, mmio); } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c new file mode 100644 index 000000000000..32d730bd5bb6 --- /dev/null +++ b/drivers/scsi/sata_sil24.c @@ -0,0 +1,875 @@ +/* + * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers + * + * Copyright 2005 Tejun Heo + * + * Based on preview driver from Silicon Image. + * + * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support + * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make + * those work. Enabling those shouldn't be difficult. Basic + * structure is all there (in libata-dev tree). If you have any + * information about this hardware, please contact me or linux-ide. + * Info is needed on... + * + * - How to issue tagged commands and turn on sactive on issue accordingly. + * - Where to put an ATAPI command and how to tell the device to send it. + * - How to enable/use 64bit. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <scsi/scsi_host.h> +#include "scsi.h" +#include <linux/libata.h> +#include <asm/io.h> + +#define DRV_NAME "sata_sil24" +#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ + +/* + * Port request block (PRB) 32 bytes + */ +struct sil24_prb { + u16 ctrl; + u16 prot; + u32 rx_cnt; + u8 fis[6 * 4]; +}; + +/* + * Scatter gather entry (SGE) 16 bytes + */ +struct sil24_sge { + u64 addr; + u32 cnt; + u32 flags; +}; + +/* + * Port multiplier + */ +struct sil24_port_multiplier { + u32 diag; + u32 sactive; +}; + +enum { + /* + * Global controller registers (128 bytes @ BAR0) + */ + /* 32 bit regs */ + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ + + PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ + PORT_ACTIVATE_UPPER_ADDR= 0x101c, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_RESUME = (1 << 6), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */ + PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */ + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ + PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ + PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ + PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ + PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ + PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ + PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ + PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ + PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ + PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ + PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ + PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ + PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* board id */ + BID_SIL3124 = 0, + BID_SIL3132 = 1, + BID_SIL3131 = 2, + + IRQ_STAT_4PORTS = 0xf, +}; + +struct sil24_cmd_block { + struct sil24_prb prb; + struct sil24_sge sge[LIBATA_MAX_PRD]; +}; + +/* + * ap->private_data + * + * The preview driver always returned 0 for status. We emulate it + * here from the previous interrupt. + */ +struct sil24_port_priv { + struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ + dma_addr_t cmd_block_dma; /* DMA base addr for them */ + struct ata_taskfile tf; /* Cached taskfile registers */ +}; + +/* ap->host_set->private_data */ +struct sil24_host_priv { + void *host_base; /* global controller control (128 bytes @BAR0) */ + void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ +}; + +static u8 sil24_check_status(struct ata_port *ap); +static u8 sil24_check_err(struct ata_port *ap); +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); +static void sil24_phy_reset(struct ata_port *ap); +static void sil24_qc_prep(struct ata_queued_cmd *qc); +static int sil24_qc_issue(struct ata_queued_cmd *qc); +static void sil24_irq_clear(struct ata_port *ap); +static void sil24_eng_timeout(struct ata_port *ap); +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static int sil24_port_start(struct ata_port *ap); +static void sil24_port_stop(struct ata_port *ap); +static void sil24_host_stop(struct ata_host_set *host_set); +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +static struct pci_device_id sil24_pci_tbl[] = { + { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, + { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, + { } /* terminate list */ +}; + +static struct pci_driver sil24_pci_driver = { + .name = DRV_NAME, + .id_table = sil24_pci_tbl, + .probe = sil24_init_one, + .remove = ata_pci_remove_one, /* safe? */ +}; + +static Scsi_Host_Template sil24_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, /* NCQ not supported yet */ +}; + +static const struct ata_port_operations sil24_ops = { + .port_disable = ata_port_disable, + + .check_status = sil24_check_status, + .check_altstatus = sil24_check_status, + .check_err = sil24_check_err, + .dev_select = ata_noop_dev_select, + + .tf_read = sil24_tf_read, + + .phy_reset = sil24_phy_reset, + + .qc_prep = sil24_qc_prep, + .qc_issue = sil24_qc_issue, + + .eng_timeout = sil24_eng_timeout, + + .irq_handler = sil24_interrupt, + .irq_clear = sil24_irq_clear, + + .scr_read = sil24_scr_read, + .scr_write = sil24_scr_write, + + .port_start = sil24_port_start, + .port_stop = sil24_port_stop, + .host_stop = sil24_host_stop, +}; + +/* + * Use bits 30-31 of host_flags to encode available port numbers. + * Current maxium is 4. + */ +#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) +#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) + +static struct ata_port_info sil24_port_info[] = { + /* sil_3124 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3132 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3131/sil_3531 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, +}; + +static inline void sil24_update_tf(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void *port = (void *)ap->ioaddr.cmd_addr; + struct sil24_prb *prb = port; + + ata_tf_from_fis(prb->fis, &pp->tf); +} + +static u8 sil24_check_status(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.command; +} + +static u8 sil24_check_err(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.feature; +} + +static int sil24_scr_map[] = { + [SCR_CONTROL] = 0, + [SCR_STATUS] = 1, + [SCR_ERROR] = 2, + [SCR_ACTIVE] = 3, +}; + +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + return readl(scr_addr + sil24_scr_map[sc_reg] * 4); + } + return 0xffffffffU; +} + +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); + } +} + +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sil24_port_priv *pp = ap->private_data; + *tf = pp->tf; +} + +static void sil24_phy_reset(struct ata_port *ap) +{ + __sata_phy_reset(ap); + /* + * No ATAPI yet. Just unconditionally indicate ATA device. + * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA + * and libata core will ignore the device. + */ + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + ap->device[0].class = ATA_DEV_ATA; +} + +static inline void sil24_fill_sg(struct ata_queued_cmd *qc, + struct sil24_cmd_block *cb) +{ + struct scatterlist *sg = qc->sg; + struct sil24_sge *sge = cb->sge; + unsigned i; + + for (i = 0; i < qc->n_elem; i++, sg++, sge++) { + sge->addr = cpu_to_le64(sg_dma_address(sg)); + sge->cnt = cpu_to_le32(sg_dma_len(sg)); + sge->flags = 0; + sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM); + } +} + +static void sil24_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + struct sil24_cmd_block *cb = pp->cmd_block + qc->tag; + struct sil24_prb *prb = &cb->prb; + + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + break; + default: + /* ATAPI isn't supported yet */ + BUG(); + } + + ata_tf_to_fis(&qc->tf, prb->fis, 0); + + if (qc->flags & ATA_QCFLAG_DMAMAP) + sil24_fill_sg(qc, cb); +} + +static int sil24_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void *port = (void *)ap->ioaddr.cmd_addr; + struct sil24_port_priv *pp = ap->private_data; + dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); + + writel((u32)paddr, port + PORT_CMD_ACTIVATE); + return 0; +} + +static void sil24_irq_clear(struct ata_port *ap) +{ + /* unused */ +} + +static int __sil24_reset_controller(void *port) +{ + int cnt; + u32 tmp; + + /* Reset controller state. Is this correct? */ + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + readl(port + PORT_CTRL_STAT); /* sync */ + + /* Max ~100ms */ + for (cnt = 0; cnt < 1000; cnt++) { + udelay(100); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_DEV_RST)) + break; + } + + if (tmp & PORT_CS_DEV_RST) + return -1; + return 0; +} + +static void sil24_reset_controller(struct ata_port *ap) +{ + printk(KERN_NOTICE DRV_NAME + " ata%u: resetting controller...\n", ap->id); + if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + printk(KERN_ERR DRV_NAME + " ata%u: failed to reset controller\n", ap->id); +} + +static void sil24_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (!qc) { + printk(KERN_ERR "ata%u: BUG: tiemout without command\n", + ap->id); + return; + } + + /* + * hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + printk(KERN_ERR "ata%u: command timeout\n", ap->id); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); +} + +static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; + void *port = (void *)ap->ioaddr.cmd_addr; + u32 irq_stat, cmd_err, sstatus, serror; + + irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ + + if (!(irq_stat & PORT_IRQ_ERROR)) { + /* ignore non-completion, non-error irqs for now */ + printk(KERN_WARNING DRV_NAME + "ata%u: non-error exception irq (irq_stat %x)\n", + ap->id, irq_stat); + return; + } + + cmd_err = readl(port + PORT_CMD_ERR); + sstatus = readl(port + PORT_SSTATUS); + serror = readl(port + PORT_SERROR); + if (serror) + writel(serror, port + PORT_SERROR); + + printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + + if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) { + /* + * Device is reporting error, tf registers are valid. + */ + sil24_update_tf(ap); + } else { + /* + * Other errors. libata currently doesn't have any + * mechanism to report these errors. Just turn on + * ATA_ERR. + */ + pp->tf.command = ATA_ERR; + } + + if (qc) + ata_qc_complete(qc, pp->tf.command); + + sil24_reset_controller(ap); +} + +static inline void sil24_host_intr(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + void *port = (void *)ap->ioaddr.cmd_addr; + u32 slot_stat; + + slot_stat = readl(port + PORT_SLOT_STAT); + if (!(slot_stat & HOST_SSTAT_ATTN)) { + struct sil24_port_priv *pp = ap->private_data; + /* + * !HOST_SSAT_ATTN guarantees successful completion, + * so reading back tf registers is unnecessary for + * most commands. TODO: read tf registers for + * commands which require these values on successful + * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER, + * DEVICE RESET and READ PORT MULTIPLIER (any more?). + */ + sil24_update_tf(ap); + + if (qc) + ata_qc_complete(qc, pp->tf.command); + } else + sil24_error_intr(ap, slot_stat); +} + +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct sil24_host_priv *hpriv = host_set->private_data; + unsigned handled = 0; + u32 status; + int i; + + status = readl(hpriv->host_base + HOST_IRQ_STAT); + + if (status == 0xffffffff) { + printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, " + "PCI fault or device removal?\n"); + goto out; + } + + if (!(status & IRQ_STAT_4PORTS)) + goto out; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) + if (status & (1 << i)) { + struct ata_port *ap = host_set->ports[i]; + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { + sil24_host_intr(host_set->ports[i]); + handled++; + } else + printk(KERN_ERR DRV_NAME + ": interrupt from disabled port %d\n", i); + } + + spin_unlock(&host_set->lock); + out: + return IRQ_RETVAL(handled); +} + +static int sil24_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_port_priv *pp; + struct sil24_cmd_block *cb; + size_t cb_size = sizeof(*cb); + dma_addr_t cb_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + memset(pp, 0, sizeof(*pp)); + + pp->tf.command = ATA_DRDY; + + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); + if (!cb) { + kfree(pp); + return -ENOMEM; + } + memset(cb, 0, cb_size); + + pp->cmd_block = cb; + pp->cmd_block_dma = cb_dma; + + ap->private_data = pp; + + return 0; +} + +static void sil24_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_port_priv *pp = ap->private_data; + size_t cb_size = sizeof(*pp->cmd_block); + + dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); + kfree(pp); +} + +static void sil24_host_stop(struct ata_host_set *host_set) +{ + struct sil24_host_priv *hpriv = host_set->private_data; + + iounmap(hpriv->host_base); + iounmap(hpriv->port_base); + kfree(hpriv); +} + +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_port_info *pinfo = &sil24_port_info[board_id]; + struct ata_probe_ent *probe_ent = NULL; + struct sil24_host_priv *hpriv = NULL; + void *host_base = NULL, *port_base = NULL; + int i, rc; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto out_disable; + + rc = -ENOMEM; + /* ioremap mmio registers */ + host_base = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!host_base) + goto out_free; + port_base = ioremap(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + if (!port_base) + goto out_free; + + /* allocate & init probe_ent and hpriv */ + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + goto out_free; + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + goto out_free; + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = pinfo->sht; + probe_ent->host_flags = pinfo->host_flags; + probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->udma_mask = pinfo->udma_mask; + probe_ent->port_ops = pinfo->port_ops; + probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = port_base; + probe_ent->private_data = hpriv; + + memset(hpriv, 0, sizeof(*hpriv)); + hpriv->host_base = host_base; + hpriv->port_base = port_base; + + /* + * Configure the device + */ + /* + * FIXME: This device is certainly 64-bit capable. We just + * don't know how to use it. After fixing 32bit activation in + * this function, enable 64bit masks here. + */ + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* Mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + for (i = 0; i < probe_ent->n_ports; i++) { + void *port = port_base + i * PORT_REGS_SIZE; + unsigned long portu = (unsigned long)port; + u32 tmp; + int cnt; + + probe_ent->port[i].cmd_addr = portu + PORT_PRB; + probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; + + ata_std_ports(&probe_ent->port[i]); + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + readl(port + PORT_CTRL_STAT); /* sync */ + for (cnt = 0; cnt < 10; cnt++) { + msleep(10); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_PORT_RST)) + break; + } + if (tmp & PORT_CS_PORT_RST) + printk(KERN_ERR DRV_NAME + "(%s): failed to clear port RST\n", + pci_name(pdev)); + } + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* FIXME: 32bit activation? */ + writel(0, port + PORT_ACTIVATE_UPPER_ADDR); + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT); + + /* Configure interrupts */ + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS, + port + PORT_IRQ_ENABLE_SET); + + /* Clear interrupts */ + writel(0x0fff0fff, port + PORT_IRQ_STAT); + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + + /* Reset itself */ + if (__sil24_reset_controller(port)) + printk(KERN_ERR DRV_NAME + "(%s): failed to reset controller\n", + pci_name(pdev)); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + + kfree(probe_ent); + return 0; + + out_free: + if (host_base) + iounmap(host_base); + if (port_base) + iounmap(port_base); + kfree(probe_ent); + kfree(hpriv); + pci_release_regions(pdev); + out_disable: + pci_disable_device(pdev); + return rc; +} + +static int __init sil24_init(void) +{ + return pci_module_init(&sil24_pci_driver); +} + +static void __exit sil24_exit(void) +{ + pci_unregister_driver(&sil24_pci_driver); +} + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); + +module_init(sil24_init); +module_exit(sil24_exit); diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index b227e51d12f4..057f7b98b6c4 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -102,7 +102,7 @@ static Scsi_Host_Template sis_sht = { .ordered_flush = 1, }; -static struct ata_port_operations sis_ops = { +static const struct ata_port_operations sis_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -263,7 +263,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &sis_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index d89d968bedac..e0f9570bc6dd 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -102,7 +102,7 @@ static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, } -static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -297,7 +297,7 @@ static Scsi_Host_Template k2_sata_sht = { }; -static struct ata_port_operations k2_sata_ops = { +static const struct ata_port_operations k2_sata_ops = { .port_disable = ata_port_disable, .tf_load = k2_sata_tf_load, .tf_read = k2_sata_tf_read, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 540a85191172..af08f4f650c1 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -137,7 +137,7 @@ struct pdc_port_priv { }; struct pdc_host_priv { - void *dimm_mmio; + void __iomem *dimm_mmio; unsigned int doing_hdma; unsigned int hdma_prod; @@ -157,8 +157,8 @@ static void pdc_20621_phy_reset (struct ata_port *ap); static int pdc_port_start(struct ata_port *ap); static void pdc_port_stop(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc20621_host_stop(struct ata_host_set *host_set); static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); static int pdc20621_detect_dimm(struct ata_probe_ent *pe); @@ -196,7 +196,7 @@ static Scsi_Host_Template pdc_sata_sht = { .ordered_flush = 1, }; -static struct ata_port_operations pdc_20621_ops = { +static const struct ata_port_operations pdc_20621_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -247,7 +247,7 @@ static void pdc20621_host_stop(struct ata_host_set *host_set) { struct pci_dev *pdev = to_pci_dev(host_set->dev); struct pdc_host_priv *hpriv = host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; pci_iounmap(pdev, dimm_mmio); kfree(hpriv); @@ -669,8 +669,8 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); VPRINTK("submitted ofs 0x%x (%u), seq %u\n", port_ofs + PDC_DIMM_ATA_PKT, port_ofs + PDC_DIMM_ATA_PKT, @@ -747,8 +747,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); readl(mmio + PDC_20621_SEQCTL + (seq * 4)); writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); } /* step two - execute ATA command */ @@ -899,7 +899,7 @@ out: DPRINTK("EXIT\n"); } -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); @@ -907,7 +907,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) } -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); @@ -1014,7 +1014,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, idx++; dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); - memcpy_toio((char *) (dimm_mmio + offset / 4), (char *) psource, dist); + memcpy_toio(dimm_mmio + offset / 4, psource, dist); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -1023,8 +1023,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, for (; (long) size >= (long) window_size ;) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, - window_size / 4); + memcpy_toio(dimm_mmio, psource, window_size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); psource += window_size; @@ -1035,7 +1034,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, if (size) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, size / 4); + memcpy_toio(dimm_mmio, psource, size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); } diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 4c9fb8b71be1..d68dc7d3422c 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -90,7 +90,7 @@ static Scsi_Host_Template uli_sht = { .ordered_flush = 1, }; -static struct ata_port_operations uli_ops = { +static const struct ata_port_operations uli_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, @@ -202,7 +202,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &uli_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 128b996b07b7..80e291a909a9 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -109,7 +109,7 @@ static Scsi_Host_Template svia_sht = { .ordered_flush = 1, }; -static struct ata_port_operations svia_sata_ops = { +static const struct ata_port_operations svia_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, @@ -212,7 +212,7 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) struct ata_probe_ent *probe_ent; struct ata_port_info *ppi = &svia_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index cf94e0158a8d..5af05fdf8544 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -86,7 +86,7 @@ static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -95,16 +95,16 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) { - unsigned long mask_addr; + void __iomem *mask_addr; u8 mask; - mask_addr = (unsigned long) ap->host_set->mmio_base + + mask_addr = ap->host_set->mmio_base + VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) @@ -115,7 +115,7 @@ static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) } -static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -231,7 +231,7 @@ static Scsi_Host_Template vsc_sata_sht = { }; -static struct ata_port_operations vsc_sata_ops = { +static const struct ata_port_operations vsc_sata_ops = { .port_disable = ata_port_disable, .tf_load = vsc_sata_tf_load, .tf_read = vsc_sata_tf_read, @@ -283,7 +283,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d struct ata_probe_ent *probe_ent = NULL; unsigned long base; int pci_dev_busy = 0; - void *mmio_base; + void __iomem *mmio_base; int rc; if (!printed_version++) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 1f0ebabf6d47..a5711d545d71 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -130,7 +130,7 @@ EXPORT_SYMBOL(scsi_device_types); * Returns: Pointer to request block. */ struct scsi_request *scsi_allocate_request(struct scsi_device *sdev, - int gfp_mask) + gfp_t gfp_mask) { const int offset = ALIGN(sizeof(struct scsi_request), 4); const int size = offset + sizeof(struct request); @@ -196,7 +196,7 @@ struct scsi_host_cmd_pool { unsigned int users; char *name; unsigned int slab_flags; - unsigned int gfp_mask; + gfp_t gfp_mask; }; static struct scsi_host_cmd_pool scsi_cmd_pool = { @@ -213,7 +213,7 @@ static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { static DECLARE_MUTEX(host_cmd_pool_mutex); static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, - int gfp_mask) + gfp_t gfp_mask) { struct scsi_cmnd *cmd; @@ -245,7 +245,7 @@ static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, * * Returns: The allocated scsi command structure. */ -struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, int gfp_mask) +struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask) { struct scsi_cmnd *cmd; diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index de7f98cc38fe..6a3f6aae8a97 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -205,7 +205,8 @@ int scsi_ioctl_send_command(struct scsi_device *sdev, unsigned int inlen, outlen, cmdlen; unsigned int needed, buf_needed; int timeout, retries, result; - int data_direction, gfp_mask = GFP_KERNEL; + int data_direction; + gfp_t gfp_mask = GFP_KERNEL; if (!sic) return -EINVAL; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 0074f28c37b2..3ff538809786 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -677,7 +677,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int uptodate, return NULL; } -static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, int gfp_mask) +static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, gfp_t gfp_mask) { struct scsi_host_sg_pool *sgp; struct scatterlist *sgl; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 40886e1c9616..861e51375d70 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2644,7 +2644,7 @@ static char * sg_page_malloc(int rqSz, int lowDma, int *retSzp) { char *resp = NULL; - int page_mask; + gfp_t page_mask; int order, a_size; int resSz = rqSz; diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index d45ba4832162..5eb54d8019b4 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3577,7 +3577,8 @@ static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long a static struct st_buffer * new_tape_buffer(int from_initialization, int need_dma, int max_sg) { - int i, priority, got = 0, segs = 0; + int i, got = 0, segs = 0; + gfp_t priority; struct st_buffer *tb; if (from_initialization) @@ -3610,7 +3611,8 @@ static struct st_buffer * /* Try to allocate enough space in the tape buffer */ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma) { - int segs, nbr, max_segs, b_size, priority, order, got; + int segs, nbr, max_segs, b_size, order, got; + gfp_t priority; if (new_size <= STbuffer->buffer_size) return 1; |