diff options
Diffstat (limited to 'drivers/scsi/ufs/ufs_quirks.h')
| -rw-r--r-- | drivers/scsi/ufs/ufs_quirks.h | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h new file mode 100644 index 000000000000..ee4ab85e2801 --- /dev/null +++ b/drivers/scsi/ufs/ufs_quirks.h @@ -0,0 +1,151 @@ +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _UFS_QUIRKS_H_ +#define _UFS_QUIRKS_H_ + +/* return true if s1 is a prefix of s2 */ +#define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1)) + +#define UFS_ANY_VENDOR 0xFFFF +#define UFS_ANY_MODEL "ANY_MODEL" + +#define MAX_MODEL_LEN 16 + +#define UFS_VENDOR_TOSHIBA 0x198 +#define UFS_VENDOR_SAMSUNG 0x1CE + +/** + * ufs_device_info - ufs device details + * @wmanufacturerid: card details + * @model: card model + */ +struct ufs_device_info { + u16 wmanufacturerid; + char model[MAX_MODEL_LEN + 1]; +}; + +/** + * ufs_dev_fix - ufs device quirk info + * @card: ufs card details + * @quirk: device quirk + */ +struct ufs_dev_fix { + struct ufs_device_info card; + unsigned int quirk; +}; + +#define END_FIX { { 0 }, 0 } + +/* add specific device quirk */ +#define UFS_FIX(_vendor, _model, _quirk) \ + { \ + .card.wmanufacturerid = (_vendor),\ + .card.model = (_model), \ + .quirk = (_quirk), \ + } + +/* + * If UFS device is having issue in processing LCC (Line Control + * Command) coming from UFS host controller then enable this quirk. + * When this quirk is enabled, host controller driver should disable + * the LCC transmission on UFS host controller (by clearing + * TX_LCC_ENABLE attribute of host to 0). + */ +#define UFS_DEVICE_QUIRK_BROKEN_LCC (1 << 0) + +/* + * Some UFS devices don't need VCCQ rail for device operations. Enabling this + * quirk for such devices will make sure that VCCQ rail is not voted. + */ +#define UFS_DEVICE_NO_VCCQ (1 << 1) + +/* + * Some vendor's UFS device sends back to back NACs for the DL data frames + * causing the host controller to raise the DFES error status. Sometimes + * such UFS devices send back to back NAC without waiting for new + * retransmitted DL frame from the host and in such cases it might be possible + * the Host UniPro goes into bad state without raising the DFES error + * interrupt. If this happens then all the pending commands would timeout + * only after respective SW command (which is generally too large). + * + * We can workaround such device behaviour like this: + * - As soon as SW sees the DL NAC error, it should schedule the error handler + * - Error handler would sleep for 50ms to see if there are any fatal errors + * raised by UFS controller. + * - If there are fatal errors then SW does normal error recovery. + * - If there are no fatal errors then SW sends the NOP command to device + * to check if link is alive. + * - If NOP command times out, SW does normal error recovery + * - If NOP command succeed, skip the error handling. + * + * If DL NAC error is seen multiple times with some vendor's UFS devices then + * enable this quirk to initiate quick error recovery and also silence related + * error logs to reduce spamming of kernel logs. + */ +#define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2) + +/* + * Some UFS devices may not work properly after resume if the link was kept + * in off state during suspend. Enabling this quirk will not allow the + * link to be kept in off state during suspend. + */ +#define UFS_DEVICE_QUIRK_NO_LINK_OFF (1 << 3) + +/* + * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as + * 600us which may not be enough for reliable hibern8 exit hardware sequence + * from UFS device. + * To workaround this issue, host should set its PA_TACTIVATE time to 1ms even + * if device advertises RX_MIN_ACTIVATETIME_CAPABILITY less than 1ms. + */ +#define UFS_DEVICE_QUIRK_PA_TACTIVATE (1 << 4) + +/* + * Some UFS memory devices may have really low read/write throughput in + * FAST AUTO mode, enable this quirk to make sure that FAST AUTO mode is + * never enabled for such devices. + */ +#define UFS_DEVICE_NO_FASTAUTO (1 << 5) + +/* + * It seems some UFS devices may keep drawing more than sleep current + * (atleast for 500us) from UFS rails (especially from VCCQ rail). + * To avoid this situation, add 2ms delay before putting these UFS + * rails in LPM mode. + */ +#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM (1 << 6) + +struct ufs_hba; +void ufs_advertise_fixup_device(struct ufs_hba *hba); + +static struct ufs_dev_fix ufs_fixups[] = { + /* UFS cards deviations table */ + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, + UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM), + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ), + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, + UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS), + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, + UFS_DEVICE_NO_FASTAUTO), + UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL, + UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM), + UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG", + UFS_DEVICE_QUIRK_PA_TACTIVATE), + UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG", + UFS_DEVICE_QUIRK_PA_TACTIVATE), + + END_FIX +}; +#endif /* UFS_QUIRKS_H_ */ |