1 files changed, 40 insertions, 171 deletions

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 79c77b485a67..1ad0c36375b8 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -527,9 +527,9 @@ void scsi_log_send(struct scsi_cmnd *cmd)
 	 *
 	 * 1: nothing (match completion)
 	 *
-	 * 2: log opcode + command of all commands
+	 * 2: log opcode + command of all commands + cmd address
 	 *
-	 * 3: same as 2 plus dump cmd address
+	 * 3: same as 2
 	 *
 	 * 4: same as 3 plus dump extra junk
 	 */
@@ -537,10 +537,8 @@ void scsi_log_send(struct scsi_cmnd *cmd)
 		level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
 				       SCSI_LOG_MLQUEUE_BITS);
 		if (level > 1) {
-			scmd_printk(KERN_INFO, cmd, "Send: ");
-			if (level > 2)
-				printk("0x%p ", cmd);
-			printk("\n");
+			scmd_printk(KERN_INFO, cmd,
+				    "Send: scmd 0x%p\n", cmd);
 			scsi_print_command(cmd);
 			if (level > 3) {
 				printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
@@ -565,7 +563,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
 	 *
 	 * 2: same as 1 but for all command completions.
 	 *
-	 * 3: same as 2 plus dump cmd address
+	 * 3: same as 2
 	 *
 	 * 4: same as 3 plus dump extra junk
 	 */
@@ -574,39 +572,10 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
 				       SCSI_LOG_MLCOMPLETE_BITS);
 		if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
 		    (level > 1)) {
-			scmd_printk(KERN_INFO, cmd, "Done: ");
-			if (level > 2)
-				printk("0x%p ", cmd);
-			/*
-			 * Dump truncated values, so we usually fit within
-			 * 80 chars.
-			 */
-			switch (disposition) {
-			case SUCCESS:
-				printk("SUCCESS\n");
-				break;
-			case NEEDS_RETRY:
-				printk("RETRY\n");
-				break;
-			case ADD_TO_MLQUEUE:
-				printk("MLQUEUE\n");
-				break;
-			case FAILED:
-				printk("FAILED\n");
-				break;
-			case TIMEOUT_ERROR:
-				/* 
-				 * If called via scsi_times_out.
-				 */
-				printk("TIMEOUT\n");
-				break;
-			default:
-				printk("UNKNOWN\n");
-			}
-			scsi_print_result(cmd);
+			scsi_print_result(cmd, "Done: ", disposition);
 			scsi_print_command(cmd);
 			if (status_byte(cmd->result) & CHECK_CONDITION)
-				scsi_print_sense("", cmd);
+				scsi_print_sense(cmd);
 			if (level > 3)
 				scmd_printk(KERN_INFO, cmd,
 					    "scsi host busy %d failed %d\n",
@@ -634,87 +603,6 @@ void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 EXPORT_SYMBOL(scsi_cmd_get_serial);
 
 /**
- * scsi_dispatch_command - Dispatch a command to the low-level driver.
- * @cmd: command block we are dispatching.
- *
- * Return: nonzero return request was rejected and device's queue needs to be
- * plugged.
- */
-int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
-{
-	struct Scsi_Host *host = cmd->device->host;
-	int rtn = 0;
-
-	atomic_inc(&cmd->device->iorequest_cnt);
-
-	/* check if the device is still usable */
-	if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
-		/* in SDEV_DEL we error all commands. DID_NO_CONNECT
-		 * returns an immediate error upwards, and signals
-		 * that the device is no longer present */
-		cmd->result = DID_NO_CONNECT << 16;
-		goto done;
-	}
-
-	/* Check to see if the scsi lld made this device blocked. */
-	if (unlikely(scsi_device_blocked(cmd->device))) {
-		/*
-		 * in blocked state, the command is just put back on
-		 * the device queue.  The suspend state has already
-		 * blocked the queue so future requests should not
-		 * occur until the device transitions out of the
-		 * suspend state.
-		 */
-		SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
-			"queuecommand : device blocked\n"));
-		return SCSI_MLQUEUE_DEVICE_BUSY;
-	}
-
-	/* Store the LUN value in cmnd, if needed. */
-	if (cmd->device->lun_in_cdb)
-		cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
-			       (cmd->device->lun << 5 & 0xe0);
-
-	scsi_log_send(cmd);
-
-	/*
-	 * Before we queue this command, check if the command
-	 * length exceeds what the host adapter can handle.
-	 */
-	if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
-		SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
-			       "queuecommand : command too long. "
-			       "cdb_size=%d host->max_cmd_len=%d\n",
-			       cmd->cmd_len, cmd->device->host->max_cmd_len));
-		cmd->result = (DID_ABORT << 16);
-		goto done;
-	}
-
-	if (unlikely(host->shost_state == SHOST_DEL)) {
-		cmd->result = (DID_NO_CONNECT << 16);
-		goto done;
-
-	}
-
-	trace_scsi_dispatch_cmd_start(cmd);
-	rtn = host->hostt->queuecommand(host, cmd);
-	if (rtn) {
-		trace_scsi_dispatch_cmd_error(cmd, rtn);
-		if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
-		    rtn != SCSI_MLQUEUE_TARGET_BUSY)
-			rtn = SCSI_MLQUEUE_HOST_BUSY;
-
-		SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
-			"queuecommand : request rejected\n"));
-	}
-
-	return rtn;
- done:
-	cmd->scsi_done(cmd);
-	return 0;
-}
-
-/**
  * scsi_finish_command - cleanup and pass command back to upper layer
  * @cmd: the command
  *
@@ -773,32 +661,18 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
 }
 
 /**
- * scsi_adjust_queue_depth - Let low level drivers change a device's queue depth
+ * scsi_change_queue_depth - change a device's queue depth
  * @sdev: SCSI Device in question
- * @tagged: Do we use tagged queueing (non-0) or do we treat
- *          this device as an untagged device (0)
- * @tags: Number of tags allowed if tagged queueing enabled,
- *        or number of commands the low level driver can
- *        queue up in non-tagged mode (as per cmd_per_lun).
- *
- * Returns:	Nothing
+ * @depth: number of commands allowed to be queued to the driver
  *
- * Lock Status:	None held on entry
- *
- * Notes:	Low level drivers may call this at any time and we will do
- * 		the right thing depending on whether or not the device is
- * 		currently active and whether or not it even has the
- * 		command blocks built yet.
+ * Sets the device queue depth and returns the new value.
  */
-void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
+int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
 {
 	unsigned long flags;
 
-	/*
-	 * refuse to set tagged depth to an unworkable size
-	 */
-	if (tags <= 0)
-		return;
+	if (depth <= 0)
+		goto out;
 
 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 
@@ -813,35 +687,17 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
 	 */
 	if (!shost_use_blk_mq(sdev->host) && !sdev->host->bqt) {
 		if (blk_queue_tagged(sdev->request_queue) &&
-		    blk_queue_resize_tags(sdev->request_queue, tags) != 0)
-			goto out;
+		    blk_queue_resize_tags(sdev->request_queue, depth) != 0)
+			goto out_unlock;
 	}
 
-	sdev->queue_depth = tags;
-	switch (tagged) {
-		case 0:
-			sdev->ordered_tags = 0;
-			sdev->simple_tags = 0;
-			break;
-		case MSG_ORDERED_TAG:
-			sdev->ordered_tags = 1;
-			sdev->simple_tags = 1;
-			break;
-		case MSG_SIMPLE_TAG:
-			sdev->ordered_tags = 0;
-			sdev->simple_tags = 1;
-			break;
-		default:
-			sdev->ordered_tags = 0;
-			sdev->simple_tags = 0;
-			sdev_printk(KERN_WARNING, sdev,
-				    "scsi_adjust_queue_depth, bad queue type, "
-				    "disabled\n");
-	}
- out:
+	sdev->queue_depth = depth;
+out_unlock:
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+out:
+	return sdev->queue_depth;
 }
-EXPORT_SYMBOL(scsi_adjust_queue_depth);
+EXPORT_SYMBOL(scsi_change_queue_depth);
 
 /**
  * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth
@@ -885,19 +741,32 @@ int scsi_track_queue_full(struct scsi_device *sdev, int depth)
 		return 0;
 	if (sdev->last_queue_full_depth < 8) {
 		/* Drop back to untagged */
-		scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
+		scsi_set_tag_type(sdev, 0);
+		scsi_change_queue_depth(sdev, sdev->host->cmd_per_lun);
 		return -1;
 	}
-	
-	if (sdev->ordered_tags)
-		scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
-	else
-		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
-	return depth;
+
+	return scsi_change_queue_depth(sdev, depth);
 }
 EXPORT_SYMBOL(scsi_track_queue_full);
 
 /**
+ * scsi_change_queue_type() - Change a device's queue type
+ * @sdev:     The SCSI device whose queue depth is to change
+ * @tag_type: Identifier for queue type
+ */
+int scsi_change_queue_type(struct scsi_device *sdev, int tag_type)
+{
+	if (!sdev->tagged_supported)
+		return 0;
+
+	scsi_set_tag_type(sdev, tag_type);
+	return tag_type;
+
+}
+EXPORT_SYMBOL(scsi_change_queue_type);
+
+/**
  * scsi_vpd_inquiry - Request a device provide us with a VPD page
  * @sdev: The device to ask
  * @buffer: Where to put the result