diff options
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_fw.h')
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_fw.h | 139 |
1 files changed, 138 insertions, 1 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 855226e08665..c94c9ddfb3a6 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -11,7 +11,7 @@ #define MAX_PRST_DEV_DB_ENTRIES 64 #define MIN_DISC_DEV_DB_ENTRY MAX_PRST_DEV_DB_ENTRIES -#define MAX_DEV_DB_ENTRIES 512 +#define MAX_DEV_DB_ENTRIES 512 /************************************************************************* * @@ -37,6 +37,33 @@ struct host_mem_cfg_regs { __le32 rsrvd1[31]; /* 0x84-0xFF */ }; +/* + * ISP 82xx I/O Register Set structure definitions. + */ +struct device_reg_82xx { + __le32 req_q_out; /* 0x0000 (R): Request Queue out-Pointer. */ + __le32 reserve1[63]; /* Request Queue out-Pointer. (64 * 4) */ + __le32 rsp_q_in; /* 0x0100 (R/W): Response Queue In-Pointer. */ + __le32 reserve2[63]; /* Response Queue In-Pointer. */ + __le32 rsp_q_out; /* 0x0200 (R/W): Response Queue Out-Pointer. */ + __le32 reserve3[63]; /* Response Queue Out-Pointer. */ + + __le32 mailbox_in[8]; /* 0x0300 (R/W): Mail box In registers */ + __le32 reserve4[24]; + __le32 hint; /* 0x0380 (R/W): Host interrupt register */ +#define HINT_MBX_INT_PENDING BIT_0 + __le32 reserve5[31]; + __le32 mailbox_out[8]; /* 0x0400 (R): Mail box Out registers */ + __le32 reserve6[56]; + + __le32 host_status; /* Offset 0x500 (R): host status */ +#define HSRX_RISC_MB_INT BIT_0 /* RISC to Host Mailbox interrupt */ +#define HSRX_RISC_IOCB_INT BIT_1 /* RISC to Host IOCB interrupt */ + + __le32 host_int; /* Offset 0x0504 (R/W): Interrupt status. */ +#define ISRX_82XX_RISC_INT BIT_0 /* RISC interrupt. */ +}; + /* remote register set (access via PCI memory read/write) */ struct isp_reg { #define MBOX_REG_COUNT 8 @@ -206,6 +233,79 @@ union external_hw_config_reg { uint32_t Asuint32_t; }; +/* 82XX Support start */ +/* 82xx Default FLT Addresses */ +#define FA_FLASH_LAYOUT_ADDR_82 0xFC400 +#define FA_FLASH_DESCR_ADDR_82 0xFC000 +#define FA_BOOT_LOAD_ADDR_82 0x04000 +#define FA_BOOT_CODE_ADDR_82 0x20000 +#define FA_RISC_CODE_ADDR_82 0x40000 +#define FA_GOLD_RISC_CODE_ADDR_82 0x80000 + +/* Flash Description Table */ +struct qla_fdt_layout { + uint8_t sig[4]; + uint16_t version; + uint16_t len; + uint16_t checksum; + uint8_t unused1[2]; + uint8_t model[16]; + uint16_t man_id; + uint16_t id; + uint8_t flags; + uint8_t erase_cmd; + uint8_t alt_erase_cmd; + uint8_t wrt_enable_cmd; + uint8_t wrt_enable_bits; + uint8_t wrt_sts_reg_cmd; + uint8_t unprotect_sec_cmd; + uint8_t read_man_id_cmd; + uint32_t block_size; + uint32_t alt_block_size; + uint32_t flash_size; + uint32_t wrt_enable_data; + uint8_t read_id_addr_len; + uint8_t wrt_disable_bits; + uint8_t read_dev_id_len; + uint8_t chip_erase_cmd; + uint16_t read_timeout; + uint8_t protect_sec_cmd; + uint8_t unused2[65]; +}; + +/* Flash Layout Table */ + +struct qla_flt_location { + uint8_t sig[4]; + uint16_t start_lo; + uint16_t start_hi; + uint8_t version; + uint8_t unused[5]; + uint16_t checksum; +}; + +struct qla_flt_header { + uint16_t version; + uint16_t length; + uint16_t checksum; + uint16_t unused; +}; + +/* 82xx FLT Regions */ +#define FLT_REG_FDT 0x1a +#define FLT_REG_FLT 0x1c +#define FLT_REG_BOOTLOAD_82 0x72 +#define FLT_REG_FW_82 0x74 +#define FLT_REG_GOLD_FW_82 0x75 +#define FLT_REG_BOOT_CODE_82 0x78 + +struct qla_flt_region { + uint32_t code; + uint32_t size; + uint32_t start; + uint32_t end; +}; + /************************************************************************* * * Mailbox Commands Structures and Definitions @@ -215,6 +315,10 @@ union external_hw_config_reg { /* Mailbox command definitions */ #define MBOX_CMD_ABOUT_FW 0x0009 #define MBOX_CMD_PING 0x000B +#define MBOX_CMD_ENABLE_INTRS 0x0010 +#define INTR_DISABLE 0 +#define INTR_ENABLE 1 +#define MBOX_CMD_STOP_FW 0x0014 #define MBOX_CMD_ABORT_TASK 0x0015 #define MBOX_CMD_LUN_RESET 0x0016 #define MBOX_CMD_TARGET_WARM_RESET 0x0017 @@ -243,6 +347,7 @@ union external_hw_config_reg { #define DDB_DS_LOGIN_IN_PROCESS 0x07 #define MBOX_CMD_GET_FW_STATE 0x0069 #define MBOX_CMD_GET_INIT_FW_CTRL_BLOCK_DEFAULTS 0x006A +#define MBOX_CMD_GET_SYS_INFO 0x0078 #define MBOX_CMD_RESTORE_FACTORY_DEFAULTS 0x0087 #define MBOX_CMD_SET_ACB 0x0088 #define MBOX_CMD_GET_ACB 0x0089 @@ -318,6 +423,15 @@ union external_hw_config_reg { #define MBOX_ASTS_IPSEC_SYSTEM_FATAL_ERROR 0x8022 #define MBOX_ASTS_SUBNET_STATE_CHANGE 0x8027 +/* ACB State Defines */ +#define ACB_STATE_UNCONFIGURED 0x00 +#define ACB_STATE_INVALID 0x01 +#define ACB_STATE_ACQUIRING 0x02 +#define ACB_STATE_TENTATIVE 0x03 +#define ACB_STATE_DEPRICATED 0x04 +#define ACB_STATE_VALID 0x05 +#define ACB_STATE_DISABLING 0x06 + /*************************************************************************/ /* Host Adapter Initialization Control Block (from host) */ @@ -558,6 +672,20 @@ struct flash_sys_info { uint32_t reserved1[39]; /* 170-1ff */ }; /* 200 */ +struct mbx_sys_info { + uint8_t board_id_str[16]; /* Keep board ID string first */ + /* in this structure for GUI. */ + uint16_t board_id; /* board ID code */ + uint16_t phys_port_cnt; /* number of physical network ports */ + uint16_t port_num; /* network port for this PCI function */ + /* (port 0 is first port) */ + uint8_t mac_addr[6]; /* MAC address for this PCI function */ + uint32_t iscsi_pci_func_cnt; /* number of iSCSI PCI functions */ + uint32_t pci_func; /* this PCI function */ + unsigned char serial_number[16]; /* serial number string */ + uint8_t reserved[16]; +}; + struct crash_record { uint16_t fw_major_version; /* 00 - 01 */ uint16_t fw_minor_version; /* 02 - 03 */ @@ -814,4 +942,13 @@ struct passthru_status { uint8_t res4[16]; /* 30-3F */ }; +/* + * ISP queue - response queue entry definition. + */ +struct response { + uint8_t data[60]; + uint32_t signature; +#define RESPONSE_PROCESSED 0xDEADDEAD /* Signature */ +}; + #endif /* _QLA4X_FW_H */ |