diff options
Diffstat (limited to 'drivers/scsi/qla2xxx')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_attr.c | 276 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 48 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_gbl.h | 33 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 84 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_iocb.c | 1 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_isr.c | 20 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_mbx.c | 108 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 98 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_rscn.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_sup.c | 963 |
10 files changed, 1545 insertions, 88 deletions
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index b17ee62dd1a9..92b3e13e9061 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -7,7 +7,6 @@ #include "qla_def.h" #include <linux/vmalloc.h> -#include <scsi/scsi_transport_fc.h> /* SYSFS attributes --------------------------------------------------------- */ @@ -114,7 +113,7 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj, char *buf, loff_t off, struct device, kobj))); unsigned long flags; - if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->nvram_size) + if (!capable(CAP_SYS_ADMIN) || off != 0) return 0; /* Read NVRAM. */ @@ -123,7 +122,7 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj, char *buf, loff_t off, ha->nvram_size); spin_unlock_irqrestore(&ha->hardware_lock, flags); - return (count); + return ha->nvram_size; } static ssize_t @@ -175,19 +174,150 @@ static struct bin_attribute sysfs_nvram_attr = { .mode = S_IRUSR | S_IWUSR, .owner = THIS_MODULE, }, - .size = 0, + .size = 512, .read = qla2x00_sysfs_read_nvram, .write = qla2x00_sysfs_write_nvram, }; +static ssize_t +qla2x00_sysfs_read_optrom(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + + if (ha->optrom_state != QLA_SREADING) + return 0; + if (off > ha->optrom_size) + return 0; + if (off + count > ha->optrom_size) + count = ha->optrom_size - off; + + memcpy(buf, &ha->optrom_buffer[off], count); + + return count; +} + +static ssize_t +qla2x00_sysfs_write_optrom(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + + if (ha->optrom_state != QLA_SWRITING) + return -EINVAL; + if (off > ha->optrom_size) + return -ERANGE; + if (off + count > ha->optrom_size) + count = ha->optrom_size - off; + + memcpy(&ha->optrom_buffer[off], buf, count); + + return count; +} + +static struct bin_attribute sysfs_optrom_attr = { + .attr = { + .name = "optrom", + .mode = S_IRUSR | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = OPTROM_SIZE_24XX, + .read = qla2x00_sysfs_read_optrom, + .write = qla2x00_sysfs_write_optrom, +}; + +static ssize_t +qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + int val; + + if (off) + return 0; + + if (sscanf(buf, "%d", &val) != 1) + return -EINVAL; + + switch (val) { + case 0: + if (ha->optrom_state != QLA_SREADING && + ha->optrom_state != QLA_SWRITING) + break; + + ha->optrom_state = QLA_SWAITING; + vfree(ha->optrom_buffer); + ha->optrom_buffer = NULL; + break; + case 1: + if (ha->optrom_state != QLA_SWAITING) + break; + + ha->optrom_state = QLA_SREADING; + ha->optrom_buffer = (uint8_t *)vmalloc(ha->optrom_size); + if (ha->optrom_buffer == NULL) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory for optrom retrieval " + "(%x).\n", ha->optrom_size); + + ha->optrom_state = QLA_SWAITING; + return count; + } + + memset(ha->optrom_buffer, 0, ha->optrom_size); + ha->isp_ops.read_optrom(ha, ha->optrom_buffer, 0, + ha->optrom_size); + break; + case 2: + if (ha->optrom_state != QLA_SWAITING) + break; + + ha->optrom_state = QLA_SWRITING; + ha->optrom_buffer = (uint8_t *)vmalloc(ha->optrom_size); + if (ha->optrom_buffer == NULL) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory for optrom update " + "(%x).\n", ha->optrom_size); + + ha->optrom_state = QLA_SWAITING; + return count; + } + memset(ha->optrom_buffer, 0, ha->optrom_size); + break; + case 3: + if (ha->optrom_state != QLA_SWRITING) + break; + + ha->isp_ops.write_optrom(ha, ha->optrom_buffer, 0, + ha->optrom_size); + break; + } + return count; +} + +static struct bin_attribute sysfs_optrom_ctl_attr = { + .attr = { + .name = "optrom_ctl", + .mode = S_IWUSR, + .owner = THIS_MODULE, + }, + .size = 0, + .write = qla2x00_sysfs_write_optrom_ctl, +}; + void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha) { struct Scsi_Host *host = ha->host; sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr); - sysfs_nvram_attr.size = ha->nvram_size; sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr); + sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr); + sysfs_create_bin_file(&host->shost_gendev.kobj, + &sysfs_optrom_ctl_attr); } void @@ -197,6 +327,12 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *ha) sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr); sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr); + sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr); + sysfs_remove_bin_file(&host->shost_gendev.kobj, + &sysfs_optrom_ctl_attr); + + if (ha->beacon_blink_led == 1) + ha->isp_ops.beacon_off(ha); } /* Scsi_Host attributes. */ @@ -384,6 +520,50 @@ qla2x00_zio_timer_store(struct class_device *cdev, const char *buf, return strlen(buf); } +static ssize_t +qla2x00_beacon_show(struct class_device *cdev, char *buf) +{ + scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev)); + int len = 0; + + if (ha->beacon_blink_led) + len += snprintf(buf + len, PAGE_SIZE-len, "Enabled\n"); + else + len += snprintf(buf + len, PAGE_SIZE-len, "Disabled\n"); + return len; +} + +static ssize_t +qla2x00_beacon_store(struct class_device *cdev, const char *buf, + size_t count) +{ + scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev)); + int val = 0; + int rval; + + if (IS_QLA2100(ha) || IS_QLA2200(ha)) + return -EPERM; + + if (test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) { + qla_printk(KERN_WARNING, ha, + "Abort ISP active -- ignoring beacon request.\n"); + return -EBUSY; + } + + if (sscanf(buf, "%d", &val) != 1) + return -EINVAL; + + if (val) + rval = ha->isp_ops.beacon_on(ha); + else + rval = ha->isp_ops.beacon_off(ha); + + if (rval != QLA_SUCCESS) + count = 0; + + return count; +} + static CLASS_DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL); static CLASS_DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL); @@ -398,6 +578,8 @@ static CLASS_DEVICE_ATTR(zio, S_IRUGO | S_IWUSR, qla2x00_zio_show, qla2x00_zio_store); static CLASS_DEVICE_ATTR(zio_timer, S_IRUGO | S_IWUSR, qla2x00_zio_timer_show, qla2x00_zio_timer_store); +static CLASS_DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, qla2x00_beacon_show, + qla2x00_beacon_store); struct class_device_attribute *qla2x00_host_attrs[] = { &class_device_attr_driver_version, @@ -411,6 +593,7 @@ struct class_device_attribute *qla2x00_host_attrs[] = { &class_device_attr_state, &class_device_attr_zio, &class_device_attr_zio_timer, + &class_device_attr_beacon, NULL, }; @@ -426,6 +609,49 @@ qla2x00_get_host_port_id(struct Scsi_Host *shost) } static void +qla2x00_get_host_speed(struct Scsi_Host *shost) +{ + scsi_qla_host_t *ha = to_qla_host(shost); + uint32_t speed = 0; + + switch (ha->link_data_rate) { + case LDR_1GB: + speed = 1; + break; + case LDR_2GB: + speed = 2; + break; + case LDR_4GB: + speed = 4; + break; + } + fc_host_speed(shost) = speed; +} + +static void +qla2x00_get_host_port_type(struct Scsi_Host *shost) +{ + scsi_qla_host_t *ha = to_qla_host(shost); + uint32_t port_type = FC_PORTTYPE_UNKNOWN; + + switch (ha->current_topology) { + case ISP_CFG_NL: + port_type = FC_PORTTYPE_LPORT; + break; + case ISP_CFG_FL: + port_type = FC_PORTTYPE_NLPORT; + break; + case ISP_CFG_N: + port_type = FC_PORTTYPE_PTP; + break; + case ISP_CFG_F: + port_type = FC_PORTTYPE_NPORT; + break; + } + fc_host_port_type(shost) = port_type; +} + +static void qla2x00_get_starget_node_name(struct scsi_target *starget) { struct Scsi_Host *host = dev_to_shost(starget->dev.parent); @@ -512,6 +738,41 @@ qla2x00_issue_lip(struct Scsi_Host *shost) return 0; } +static struct fc_host_statistics * +qla2x00_get_fc_host_stats(struct Scsi_Host *shost) +{ + scsi_qla_host_t *ha = to_qla_host(shost); + int rval; + uint16_t mb_stat[1]; + link_stat_t stat_buf; + struct fc_host_statistics *pfc_host_stat; + + pfc_host_stat = &ha->fc_host_stat; + memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics)); + + if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) { + rval = qla24xx_get_isp_stats(ha, (uint32_t *)&stat_buf, + sizeof(stat_buf) / 4, mb_stat); + } else { + rval = qla2x00_get_link_status(ha, ha->loop_id, &stat_buf, + mb_stat); + } + if (rval != 0) { + qla_printk(KERN_WARNING, ha, + "Unable to retrieve host statistics (%d).\n", mb_stat[0]); + return pfc_host_stat; + } + + pfc_host_stat->link_failure_count = stat_buf.link_fail_cnt; + pfc_host_stat->loss_of_sync_count = stat_buf.loss_sync_cnt; + pfc_host_stat->loss_of_signal_count = stat_buf.loss_sig_cnt; + pfc_host_stat->prim_seq_protocol_err_count = stat_buf.prim_seq_err_cnt; + pfc_host_stat->invalid_tx_word_count = stat_buf.inval_xmit_word_cnt; + pfc_host_stat->invalid_crc_count = stat_buf.inval_crc_cnt; + + return pfc_host_stat; +} + struct fc_function_template qla2xxx_transport_functions = { .show_host_node_name = 1, @@ -520,6 +781,10 @@ struct fc_function_template qla2xxx_transport_functions = { .get_host_port_id = qla2x00_get_host_port_id, .show_host_port_id = 1, + .get_host_speed = qla2x00_get_host_speed, + .show_host_speed = 1, + .get_host_port_type = qla2x00_get_host_port_type, + .show_host_port_type = 1, .dd_fcrport_size = sizeof(struct fc_port *), .show_rport_supported_classes = 1, @@ -536,6 +801,7 @@ struct fc_function_template qla2xxx_transport_functions = { .show_rport_dev_loss_tmo = 1, .issue_fc_host_lip = qla2x00_issue_lip, + .get_fc_host_stats = qla2x00_get_fc_host_stats, }; void diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 79d8a914f9d0..b31a03bbd14f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -29,6 +29,7 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> +#include <scsi/scsi_transport_fc.h> #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) #if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE) @@ -181,6 +182,13 @@ #define WRT_REG_DWORD(addr, data) writel(data,addr) /* + * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an + * 133Mhz slot. + */ +#define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr)) +#define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr)) + +/* * Fibre Channel device definitions. */ #define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */ @@ -432,6 +440,9 @@ struct device_reg_2xxx { #define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040 #define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080 #define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0 +#define GPIO_LED_ALL_OFF 0x0000 +#define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */ +#define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */ union { struct { @@ -1680,7 +1691,8 @@ typedef struct fc_port { uint8_t mp_byte; /* multi-path byte (not used) */ uint8_t cur_path; /* current path id */ - struct fc_rport *rport; + spinlock_t rport_lock; + struct fc_rport *rport, *drport; u32 supported_classes; struct work_struct rport_add_work; struct work_struct rport_del_work; @@ -2198,6 +2210,15 @@ struct isp_operations { void (*fw_dump) (struct scsi_qla_host *, int); void (*ascii_fw_dump) (struct scsi_qla_host *); + + int (*beacon_on) (struct scsi_qla_host *); + int (*beacon_off) (struct scsi_qla_host *); + void (*beacon_blink) (struct scsi_qla_host *); + + uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); + int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t, + uint32_t); }; /* @@ -2270,6 +2291,7 @@ typedef struct scsi_qla_host { #define LOOP_RESET_NEEDED 24 #define BEACON_BLINK_NEEDED 25 #define REGISTER_FDMI_NEEDED 26 +#define FCPORT_UPDATE_NEEDED 27 uint32_t device_flags; #define DFLG_LOCAL_DEVICES BIT_0 @@ -2329,6 +2351,10 @@ typedef struct scsi_qla_host { uint16_t min_external_loopid; /* First external loop Id */ uint16_t link_data_rate; /* F/W operating speed */ +#define LDR_1GB 0 +#define LDR_2GB 1 +#define LDR_4GB 3 +#define LDR_UNKNOWN 0xFFFF uint8_t current_topology; uint8_t prev_topology; @@ -2484,12 +2510,26 @@ typedef struct scsi_qla_host { uint8_t *port_name; uint32_t isp_abort_cnt; + /* Option ROM information. */ + char *optrom_buffer; + uint32_t optrom_size; + int optrom_state; +#define QLA_SWAITING 0 +#define QLA_SREADING 1 +#define QLA_SWRITING 2 + /* Needed for BEACON */ uint16_t beacon_blink_led; - uint16_t beacon_green_on; + uint8_t beacon_color_state; +#define QLA_LED_GRN_ON 0x01 +#define QLA_LED_YLW_ON 0x02 +#define QLA_LED_ABR_ON 0x04 +#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */ + /* ISP2322: red, green, amber. */ uint16_t zio_mode; uint16_t zio_timer; + struct fc_host_statistics fc_host_stat; } scsi_qla_host_t; @@ -2555,7 +2595,9 @@ struct _qla2x00stats { /* * Flash support definitions */ -#define FLASH_IMAGE_SIZE 131072 +#define OPTROM_SIZE_2300 0x20000 +#define OPTROM_SIZE_2322 0x100000 +#define OPTROM_SIZE_24XX 0x100000 #include "qla_gbl.h" #include "qla_dbg.h" diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 32be4c14cccb..ffdc2680f049 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -47,9 +47,11 @@ extern int qla2x00_local_device_login(scsi_qla_host_t *, uint16_t); extern void qla2x00_restart_queues(scsi_qla_host_t *, uint8_t); extern void qla2x00_rescan_fcports(scsi_qla_host_t *); +extern void qla2x00_update_fcports(scsi_qla_host_t *); extern int qla2x00_abort_isp(scsi_qla_host_t *); +extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *); /* @@ -70,15 +72,15 @@ extern char *qla2x00_get_fw_version_str(struct scsi_qla_host *, char *); extern void qla2x00_cmd_timeout(srb_t *); -extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int); -extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *); - -extern void qla2x00_blink_led(scsi_qla_host_t *); +extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int); +extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int); extern int qla2x00_down_timeout(struct semaphore *, unsigned long); extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *); +extern int qla2x00_wait_for_hba_online(scsi_qla_host_t *); + /* * Global Function Prototypes in qla_iocb.c source file. */ @@ -183,6 +185,13 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *, uint16_t *, uint16_t *, uint16_t *, extern int qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map); +extern int +qla2x00_get_link_status(scsi_qla_host_t *, uint16_t, link_stat_t *, + uint16_t *); + +extern int +qla24xx_get_isp_stats(scsi_qla_host_t *, uint32_t *, uint32_t, uint16_t *); + extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *); extern int qla24xx_abort_target(fc_port_t *); @@ -226,6 +235,22 @@ extern int qla2x00_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t, extern int qla24xx_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t, uint32_t); +extern int qla2x00_beacon_on(struct scsi_qla_host *); +extern int qla2x00_beacon_off(struct scsi_qla_host *); +extern void qla2x00_beacon_blink(struct scsi_qla_host *); +extern int qla24xx_beacon_on(struct scsi_qla_host *); +extern int qla24xx_beacon_off(struct scsi_qla_host *); +extern void qla24xx_beacon_blink(struct scsi_qla_host *); + +extern uint8_t *qla2x00_read_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); +extern int qla2x00_write_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); +extern uint8_t *qla24xx_read_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); +extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); + /* * Global Function Prototypes in qla_dbg.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index a91fea69ad63..634ee174bff2 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -8,7 +8,6 @@ #include <linux/delay.h> #include <linux/vmalloc.h> -#include <scsi/scsi_transport_fc.h> #include "qla_devtbl.h" @@ -32,7 +31,6 @@ static int qla2x00_fw_ready(scsi_qla_host_t *); static int qla2x00_configure_hba(scsi_qla_host_t *); static int qla2x00_configure_loop(scsi_qla_host_t *); static int qla2x00_configure_local_loop(scsi_qla_host_t *); -static void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); static int qla2x00_configure_fabric(scsi_qla_host_t *); static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *); static int qla2x00_device_resync(scsi_qla_host_t *); @@ -1688,10 +1686,16 @@ static void qla2x00_rport_del(void *data) { fc_port_t *fcport = data; + struct fc_rport *rport; + unsigned long flags; + + spin_lock_irqsave(&fcport->rport_lock, flags); + rport = fcport->drport; + fcport->drport = NULL; + spin_unlock_irqrestore(&fcport->rport_lock, flags); + if (rport) + fc_remote_port_delete(rport); - if (fcport->rport) - fc_remote_port_delete(fcport->rport); - fcport->rport = NULL; } /** @@ -1719,6 +1723,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags) atomic_set(&fcport->state, FCS_UNCONFIGURED); fcport->flags = FCF_RLC_SUPPORT; fcport->supported_classes = FC_COS_UNSPECIFIED; + spin_lock_init(&fcport->rport_lock); INIT_WORK(&fcport->rport_add_work, qla2x00_rport_add, fcport); INIT_WORK(&fcport->rport_del_work, qla2x00_rport_del, fcport); @@ -2008,7 +2013,7 @@ qla2x00_probe_for_all_luns(scsi_qla_host_t *ha) { fc_port_t *fcport; - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 0); list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; @@ -2032,13 +2037,9 @@ qla2x00_probe_for_all_luns(scsi_qla_host_t *ha) * Context: * Kernel context. */ -static void +void qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) { - uint16_t index; - unsigned long flags; - srb_t *sp; - fcport->ha = ha; fcport->login_retry = 0; fcport->port_login_retry_count = ha->port_down_retry_count * @@ -2047,28 +2048,6 @@ qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) PORT_RETRY_TIME); fcport->flags &= ~FCF_LOGIN_NEEDED; - /* - * Check for outstanding cmd on tape Bypass LUN discovery if active - * command on tape. - */ - if (fcport->flags & FCF_TAPE_PRESENT) { - spin_lock_irqsave(&ha->hardware_lock, flags); - for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { - fc_port_t *sfcp; - - if ((sp = ha->outstanding_cmds[index]) != 0) { - sfcp = sp->fcport; - if (sfcp == fcport) { - atomic_set(&fcport->state, FCS_ONLINE); - spin_unlock_irqrestore( - &ha->hardware_lock, flags); - return; - } - } - } - spin_unlock_irqrestore(&ha->hardware_lock, flags); - } - if (fcport->port_type == FCT_INITIATOR || fcport->port_type == FCT_BROADCAST) fcport->device_type = TYPE_PROCESSOR; @@ -2084,24 +2063,29 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport) { struct fc_rport_identifiers rport_ids; struct fc_rport *rport; + unsigned long flags; - if (fcport->rport) { - fc_remote_port_delete(fcport->rport); - fcport->rport = NULL; - } + if (fcport->drport) + qla2x00_rport_del(fcport); + if (fcport->rport) + return; rport_ids.node_name = wwn_to_u64(fcport->node_name); rport_ids.port_name = wwn_to_u64(fcport->port_name); rport_ids.port_id = fcport->d_id.b.domain << 16 | fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa; rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; - fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids); + rport = fc_remote_port_add(ha->host, 0, &rport_ids); if (!rport) { qla_printk(KERN_WARNING, ha, "Unable to allocate fc remote port!\n"); return; } + spin_lock_irqsave(&fcport->rport_lock, flags); + fcport->rport = rport; *((fc_port_t **)rport->dd_data) = fcport; + spin_unlock_irqrestore(&fcport->rport_lock, flags); + rport->supported_classes = fcport->supported_classes; rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; @@ -2217,12 +2201,11 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) { qla2x00_mark_device_lost(ha, fcport, - ql2xplogiabsentdevice); + ql2xplogiabsentdevice, 0); if (fcport->loop_id != FC_NO_LOOP_ID && (fcport->flags & FCF_TAPE_PRESENT) == 0 && fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { - ha->isp_ops.fabric_logout(ha, fcport->loop_id, fcport->d_id.b.domain, @@ -2694,7 +2677,8 @@ qla2x00_device_resync(scsi_qla_host_t *ha) if (atomic_read(&fcport->state) == FCS_ONLINE) { if (format != 3 || fcport->port_type != FCT_INITIATOR) { - qla2x00_mark_device_lost(ha, fcport, 0); + qla2x00_mark_device_lost(ha, fcport, + 0, 0); } } fcport->flags &= ~FCF_FARP_DONE; @@ -2741,8 +2725,7 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *ha, fc_port_t *fcport, ha->isp_ops.fabric_logout(ha, fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa); - qla2x00_mark_device_lost(ha, fcport, 1); - + qla2x00_mark_device_lost(ha, fcport, 1, 0); } else { qla2x00_update_fcport(ha, fcport); } @@ -2855,7 +2838,7 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport, ha->isp_ops.fabric_logout(ha, fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa); - qla2x00_mark_device_lost(ha, fcport, 1); + qla2x00_mark_device_lost(ha, fcport, 1, 0); rval = 1; break; @@ -2990,6 +2973,17 @@ qla2x00_rescan_fcports(scsi_qla_host_t *ha) qla2x00_probe_for_all_luns(ha); } +void +qla2x00_update_fcports(scsi_qla_host_t *ha) +{ + fc_port_t *fcport; + + /* Go with deferred removal of rport references. */ + list_for_each_entry(fcport, &ha->fcports, list) + if (fcport->drport) + qla2x00_rport_del(fcport); +} + /* * qla2x00_abort_isp * Resets ISP and aborts all outstanding commands. @@ -3019,7 +3013,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 0); } else { if (!atomic_read(&ha->loop_down_timer)) atomic_set(&ha->loop_down_timer, diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 7ec0b8d6f07b..6544b6d0891d 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -814,6 +814,7 @@ qla24xx_start_scsi(srb_t *sp) cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); /* Load SCSI command packet. */ memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index f63af081d4ff..42aa7a7c1a73 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -389,7 +389,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 1); } set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); @@ -402,9 +402,9 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_LOOP_UP: /* Loop Up Event */ - ha->link_data_rate = 0; if (IS_QLA2100(ha) || IS_QLA2200(ha)) { link_speed = link_speeds[0]; + ha->link_data_rate = LDR_1GB; } else { link_speed = link_speeds[LS_UNKNOWN]; if (mb[1] < 5) @@ -432,11 +432,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) atomic_set(&ha->loop_state, LOOP_DOWN); atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); ha->device_flags |= DFLG_NO_CABLE; - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 1); } ha->flags.management_server_logged_in = 0; - ha->link_data_rate = 0; + ha->link_data_rate = LDR_UNKNOWN; if (ql2xfdmienable) set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags); @@ -453,7 +453,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 1); } set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); @@ -482,7 +482,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) if (!atomic_read(&ha->loop_down_timer)) atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 1); } if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) { @@ -506,7 +506,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) if (!atomic_read(&ha->loop_down_timer)) atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 1); } set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); @@ -580,7 +580,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) */ atomic_set(&ha->loop_state, LOOP_UP); - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha, 1); ha->flags.rscn_queue_overflow = 1; @@ -1091,7 +1091,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) cp->result = DID_BUS_BUSY << 16; if (atomic_read(&fcport->state) == FCS_ONLINE) { - qla2x00_mark_device_lost(ha, fcport, 1); + qla2x00_mark_device_lost(ha, fcport, 1, 1); } break; @@ -1135,7 +1135,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) /* Check to see if logout occurred. */ if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT)) - qla2x00_mark_device_lost(ha, fcport, 1); + qla2x00_mark_device_lost(ha, fcport, 1, 1); break; case CS_QUEUE_FULL: diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 3099b379de9d..363dfdd042b0 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -7,7 +7,6 @@ #include "qla_def.h" #include <linux/delay.h> -#include <scsi/scsi_transport_fc.h> static void qla2x00_mbx_sem_timeout(unsigned long data) @@ -1874,7 +1873,8 @@ qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma, mcp->mb[3] = LSW(id_list_dma); mcp->mb[6] = MSW(MSD(id_list_dma)); mcp->mb[7] = LSW(MSD(id_list_dma)); - mcp->out_mb |= MBX_7|MBX_6|MBX_3|MBX_2; + mcp->mb[8] = 0; + mcp->out_mb |= MBX_8|MBX_7|MBX_6|MBX_3|MBX_2; } else { mcp->mb[1] = MSW(id_list_dma); mcp->mb[2] = LSW(id_list_dma); @@ -2017,8 +2017,109 @@ qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map) return rval; } +#endif + +/* + * qla2x00_get_link_status + * + * Input: + * ha = adapter block pointer. + * loop_id = device loop ID. + * ret_buf = pointer to link status return buffer. + * + * Returns: + * 0 = success. + * BIT_0 = mem alloc error. + * BIT_1 = mailbox error. + */ +int +qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id, + link_stat_t *ret_buf, uint16_t *status) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + link_stat_t *stat_buf; + dma_addr_t stat_buf_dma; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + + stat_buf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &stat_buf_dma); + if (stat_buf == NULL) { + DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n", + __func__, ha->host_no)); + return BIT_0; + } + memset(stat_buf, 0, sizeof(link_stat_t)); + + mcp->mb[0] = MBC_GET_LINK_STATUS; + mcp->mb[2] = MSW(stat_buf_dma); + mcp->mb[3] = LSW(stat_buf_dma); + mcp->mb[6] = MSW(MSD(stat_buf_dma)); + mcp->mb[7] = LSW(MSD(stat_buf_dma)); + mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; + mcp->in_mb = MBX_0; + if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) { + mcp->mb[1] = loop_id; + mcp->mb[4] = 0; + mcp->mb[10] = 0; + mcp->out_mb |= MBX_10|MBX_4|MBX_1; + mcp->in_mb |= MBX_1; + } else if (HAS_EXTENDED_IDS(ha)) { + mcp->mb[1] = loop_id; + mcp->mb[10] = 0; + mcp->out_mb |= MBX_10|MBX_1; + } else { + mcp->mb[1] = loop_id << 8; + mcp->out_mb |= MBX_1; + } + mcp->tov = 30; + mcp->flags = IOCTL_CMD; + rval = qla2x00_mailbox_command(ha, mcp); + + if (rval == QLA_SUCCESS) { + if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { + DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", + __func__, ha->host_no, mcp->mb[0]);) + status[0] = mcp->mb[0]; + rval = BIT_1; + } else { + /* copy over data -- firmware data is LE. */ + ret_buf->link_fail_cnt = + le32_to_cpu(stat_buf->link_fail_cnt); + ret_buf->loss_sync_cnt = + le32_to_cpu(stat_buf->loss_sync_cnt); + ret_buf->loss_sig_cnt = + le32_to_cpu(stat_buf->loss_sig_cnt); + ret_buf->prim_seq_err_cnt = + le32_to_cpu(stat_buf->prim_seq_err_cnt); + ret_buf->inval_xmit_word_cnt = + le32_to_cpu(stat_buf->inval_xmit_word_cnt); + ret_buf->inval_crc_cnt = + le32_to_cpu(stat_buf->inval_crc_cnt); + + DEBUG11(printk("%s(%ld): stat dump: fail_cnt=%d " + "loss_sync=%d loss_sig=%d seq_err=%d " + "inval_xmt_word=%d inval_crc=%d.\n", __func__, + ha->host_no, stat_buf->link_fail_cnt, + stat_buf->loss_sync_cnt, stat_buf->loss_sig_cnt, + stat_buf->prim_seq_err_cnt, + stat_buf->inval_xmit_word_cnt, + stat_buf->inval_crc_cnt);) + } + } else { + /* Failed. */ + DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, + ha->host_no, rval);) + rval = BIT_1; + } + + dma_pool_free(ha->s_dma_pool, stat_buf, stat_buf_dma); -uint8_t + return rval; +} + +int qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords, uint16_t *status) { @@ -2080,7 +2181,6 @@ qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords, return rval; } -#endif int qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4916847d84ec..9f91f1a20542 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -366,6 +366,12 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) goto qc_fail_command; } + /* Close window on fcport/rport state-transitioning. */ + if (!*(fc_port_t **)rport->dd_data) { + cmd->result = DID_IMM_RETRY << 16; + goto qc_fail_command; + } + if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || atomic_read(&ha->loop_state) == LOOP_DEAD) { @@ -421,6 +427,12 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) goto qc24_fail_command; } + /* Close window on fcport/rport state-transitioning. */ + if (!*(fc_port_t **)rport->dd_data) { + cmd->result = DID_IMM_RETRY << 16; + goto qc24_fail_command; + } + if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || atomic_read(&ha->loop_state) == LOOP_DEAD) { @@ -513,7 +525,7 @@ qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd) * Success (Adapter is online) : 0 * Failed (Adapter is offline/disabled) : 1 */ -static int +int qla2x00_wait_for_hba_online(scsi_qla_host_t *ha) { int return_status; @@ -756,7 +768,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) if (ret == SUCCESS) { if (fcport->flags & FC_FABRIC_DEVICE) { ha->isp_ops.fabric_logout(ha, fcport->loop_id); - qla2x00_mark_device_lost(ha, fcport); + qla2x00_mark_device_lost(ha, fcport, 0, 0); } } #endif @@ -1312,6 +1324,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->ports = MAX_BUSES; ha->init_cb_size = sizeof(init_cb_t); ha->mgmt_svr_loop_id = MANAGEMENT_SERVER; + ha->link_data_rate = LDR_UNKNOWN; + ha->optrom_size = OPTROM_SIZE_2300; /* Assign ISP specific operations. */ ha->isp_ops.pci_config = qla2100_pci_config; @@ -1339,6 +1353,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.write_nvram = qla2x00_write_nvram_data; ha->isp_ops.fw_dump = qla2100_fw_dump; ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump; + ha->isp_ops.read_optrom = qla2x00_read_optrom_data; + ha->isp_ops.write_optrom = qla2x00_write_optrom_data; if (IS_QLA2100(ha)) { host->max_id = MAX_TARGETS_2100; ha->mbx_count = MAILBOX_REGISTER_COUNT_2100; @@ -1364,7 +1380,12 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.intr_handler = qla2300_intr_handler; ha->isp_ops.fw_dump = qla2300_fw_dump; ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump; + ha->isp_ops.beacon_on = qla2x00_beacon_on; + ha->isp_ops.beacon_off = qla2x00_beacon_off; + ha->isp_ops.beacon_blink = qla2x00_beacon_blink; ha->gid_list_info_size = 6; + if (IS_QLA2322(ha) || IS_QLA6322(ha)) + ha->optrom_size = OPTROM_SIZE_2322; } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) { host->max_id = MAX_TARGETS_2200; ha->mbx_count = MAILBOX_REGISTER_COUNT; @@ -1400,7 +1421,13 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.write_nvram = qla24xx_write_nvram_data; ha->isp_ops.fw_dump = qla24xx_fw_dump; ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump; + ha->isp_ops.read_optrom = qla24xx_read_optrom_data; + ha->isp_ops.write_optrom = qla24xx_write_optrom_data; + ha->isp_ops.beacon_on = qla24xx_beacon_on; + ha->isp_ops.beacon_off = qla24xx_beacon_off; + ha->isp_ops.beacon_blink = qla24xx_beacon_blink; ha->gid_list_info_size = 8; + ha->optrom_size = OPTROM_SIZE_24XX; } host->can_queue = ha->request_q_length + 128; @@ -1642,6 +1669,33 @@ qla2x00_free_device(scsi_qla_host_t *ha) pci_disable_device(ha->pdev); } +static inline void +qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport, + int defer) +{ + unsigned long flags; + struct fc_rport *rport; + + if (!fcport->rport) + return; + + rport = fcport->rport; + if (defer) { + spin_lock_irqsave(&fcport->rport_lock, flags); + fcport->drport = rport; + fcport->rport = NULL; + *(fc_port_t **)rport->dd_data = NULL; + spin_unlock_irqrestore(&fcport->rport_lock, flags); + set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags); + } else { + spin_lock_irqsave(&fcport->rport_lock, flags); + fcport->rport = NULL; + *(fc_port_t **)rport->dd_data = NULL; + spin_unlock_irqrestore(&fcport->rport_lock, flags); + fc_remote_port_delete(rport); + } +} + /* * qla2x00_mark_device_lost Updates fcport state when device goes offline. * @@ -1652,10 +1706,10 @@ qla2x00_free_device(scsi_qla_host_t *ha) * Context: */ void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport, - int do_login) + int do_login, int defer) { - if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport) - schedule_work(&fcport->rport_del_work); + if (atomic_read(&fcport->state) == FCS_ONLINE) + qla2x00_schedule_rport_del(ha, fcport, defer); /* * We may need to retry the login, so don't change the state of the @@ -1702,7 +1756,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport, * Context: */ void -qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha) +qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer) { fc_port_t *fcport; @@ -1716,10 +1770,13 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha) */ if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD) continue; - if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport) - schedule_work(&fcport->rport_del_work); + if (atomic_read(&fcport->state) == FCS_ONLINE) + qla2x00_schedule_rport_del(ha, fcport, defer); atomic_set(&fcport->state, FCS_DEVICE_LOST); } + + if (defer && ha->dpc_wait && !ha->dpc_active) + up(ha->dpc_wait); } /* @@ -2038,6 +2095,8 @@ qla2x00_mem_free(scsi_qla_host_t *ha) ha->fw_dumped = 0; ha->fw_dump_reading = 0; ha->fw_dump_buffer = NULL; + + vfree(ha->optrom_buffer); } /* @@ -2161,6 +2220,9 @@ qla2x00_do_dpc(void *data) ha->host_no)); } + if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags)) + qla2x00_update_fcports(ha); + if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) { DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n", ha->host_no)); @@ -2219,13 +2281,8 @@ qla2x00_do_dpc(void *data) DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n", ha->host_no, fcport->loop_id)); - fcport->port_login_retry_count = - ha->port_down_retry_count * PORT_RETRY_TIME; - atomic_set(&fcport->state, FCS_ONLINE); - atomic_set(&fcport->port_down_timer, - ha->port_down_retry_count * PORT_RETRY_TIME); - - fcport->login_retry = 0; + qla2x00_update_fcport(ha, + fcport); } else if (status == 1) { set_bit(RELOGIN_NEEDED, &ha->dpc_flags); /* retry the login again */ @@ -2288,6 +2345,9 @@ qla2x00_do_dpc(void *data) if (!ha->interrupts_on) ha->isp_ops.enable_intrs(ha); + if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags)) + ha->isp_ops.beacon_blink(ha); + ha->dpc_active = 0; } /* End of while(1) */ @@ -2465,13 +2525,21 @@ qla2x00_timer(scsi_qla_host_t *ha) atomic_read(&ha->loop_down_timer))); } + /* Check if beacon LED needs to be blinked */ + if (ha->beacon_blink_led == 1) { + set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags); + start_dpc++; + } + /* Schedule the DPC routine if needed */ if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) || + test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) || start_dpc || test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) || test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) || + test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) || test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) && ha->dpc_wait && !ha->dpc_active) { diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c index 2c3342108dd8..b70bebe18c01 100644 --- a/drivers/scsi/qla2xxx/qla_rscn.c +++ b/drivers/scsi/qla2xxx/qla_rscn.c @@ -6,8 +6,6 @@ */ #include "qla_def.h" -#include <scsi/scsi_transport_fc.h> - /** * IO descriptor handle definitions. * diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index f4d755a643e4..3866a5760f15 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -695,3 +695,966 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, return ret; } + + +static inline void +qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags) +{ + if (IS_QLA2322(ha)) { + /* Flip all colors. */ + if (ha->beacon_color_state == QLA_LED_ALL_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = GPIO_LED_ALL_OFF; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_ALL_ON; + *pflags = GPIO_LED_RGA_ON; + } + } else { + /* Flip green led only. */ + if (ha->beacon_color_state == QLA_LED_GRN_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_GRN_ON; + *pflags = GPIO_LED_GREEN_ON_AMBER_OFF; + } + } +} + +void +qla2x00_beacon_blink(struct scsi_qla_host *ha) +{ + uint16_t gpio_enable; + uint16_t gpio_data; + uint16_t led_color = 0; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + if (ha->pio_address) + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + + spin_lock_irqsave(&ha->hardware_lock, flags); + + /* Save the Original GPIOE. */ + if (ha->pio_address) { + gpio_enable = RD_REG_WORD_PIO(®->gpioe); + gpio_data = RD_REG_WORD_PIO(®->gpiod); + } else { + gpio_enable = RD_REG_WORD(®->gpioe); + gpio_data = RD_REG_WORD(®->gpiod); + } + + /* Set the modified gpio_enable values */ + gpio_enable |= GPIO_LED_MASK; + + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + } else { + WRT_REG_WORD(®->gpioe, gpio_enable); + RD_REG_WORD(®->gpioe); + } + + qla2x00_flip_colors(ha, &led_color); + + /* Clear out any previously set LED color. */ + gpio_data &= ~GPIO_LED_MASK; + + /* Set the new input LED color to GPIOD. */ + gpio_data |= led_color; + + /* Set the modified gpio_data values */ + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpiod, gpio_data); + } else { + WRT_REG_WORD(®->gpiod, gpio_data); + RD_REG_WORD(®->gpiod); + } + + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +int +qla2x00_beacon_on(struct scsi_qla_host *ha) +{ + uint16_t gpio_enable; + uint16_t gpio_data; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; + ha->fw_options[1] |= FO1_DISABLE_GPIO6_7; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon on).\n"); + return QLA_FUNCTION_FAILED; + } + + if (ha->pio_address) + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + + /* Turn off LEDs. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + if (ha->pio_address) { + gpio_enable = RD_REG_WORD_PIO(®->gpioe); + gpio_data = RD_REG_WORD_PIO(®->gpiod); + } else { + gpio_enable = RD_REG_WORD(®->gpioe); + gpio_data = RD_REG_WORD(®->gpiod); + } + gpio_enable |= GPIO_LED_MASK; + + /* Set the modified gpio_enable values. */ + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + } else { + WRT_REG_WORD(®->gpioe, gpio_enable); + RD_REG_WORD(®->gpioe); + } + + /* Clear out previously set LED colour. */ + gpio_data &= ~GPIO_LED_MASK; + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpiod, gpio_data); + } else { + WRT_REG_WORD(®->gpiod, gpio_data); + RD_REG_WORD(®->gpiod); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* + * Let the per HBA timer kick off the blinking process based on + * the following flags. No need to do anything else now. + */ + ha->beacon_blink_led = 1; + ha->beacon_color_state = 0; + + return QLA_SUCCESS; +} + +int +qla2x00_beacon_off(struct scsi_qla_host *ha) +{ + int rval = QLA_SUCCESS; + + ha->beacon_blink_led = 0; + + /* Set the on flag so when it gets flipped it will be off. */ + if (IS_QLA2322(ha)) + ha->beacon_color_state = QLA_LED_ALL_ON; + else + ha->beacon_color_state = QLA_LED_GRN_ON; + + ha->isp_ops.beacon_blink(ha); /* This turns green LED off */ + + ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; + ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7; + + rval = qla2x00_set_fw_options(ha, ha->fw_options); + if (rval != QLA_SUCCESS) + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon off).\n"); + return rval; +} + + +static inline void +qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags) +{ + /* Flip all colors. */ + if (ha->beacon_color_state == QLA_LED_ALL_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = 0; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_ALL_ON; + *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON; + } +} + +void +qla24xx_beacon_blink(struct scsi_qla_host *ha) +{ + uint16_t led_color = 0; + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + /* Save the Original GPIOD. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Enable the gpio_data reg for update. */ + gpio_data |= GPDX_LED_UPDATE_MASK; + + WRT_REG_DWORD(®->gpiod, gpio_data); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Set the color bits. */ + qla24xx_flip_colors(ha, &led_color); + + /* Clear out any previously set LED color. */ + gpio_data &= ~GPDX_LED_COLOR_MASK; + + /* Set the new input LED color to GPIOD. */ + gpio_data |= led_color; + + /* Set the modified gpio_data values. */ + WRT_REG_DWORD(®->gpiod, gpio_data); + gpio_data = RD_REG_DWORD(®->gpiod); + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +int +qla24xx_beacon_on(struct scsi_qla_host *ha) +{ + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + if (ha->beacon_blink_led == 0) { + /* Enable firmware for update */ + ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) + return QLA_FUNCTION_FAILED; + + if (qla2x00_get_fw_options(ha, ha->fw_options) != + QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon on).\n"); + return QLA_FUNCTION_FAILED; + } + + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Enable the gpio_data reg for update. */ + gpio_data |= GPDX_LED_UPDATE_MASK; + WRT_REG_DWORD(®->gpiod, gpio_data); + RD_REG_DWORD(®->gpiod); + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + } + + /* So all colors blink together. */ + ha->beacon_color_state = 0; + + /* Let the per HBA timer kick off the blinking process. */ + ha->beacon_blink_led = 1; + + return QLA_SUCCESS; +} + +int +qla24xx_beacon_off(struct scsi_qla_host *ha) +{ + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + ha->beacon_blink_led = 0; + ha->beacon_color_state = QLA_LED_ALL_ON; + + ha->isp_ops.beacon_blink(ha); /* Will flip to all off. */ + + /* Give control back to firmware. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Disable the gpio_data reg for update. */ + gpio_data &= ~GPDX_LED_UPDATE_MASK; + WRT_REG_DWORD(®->gpiod, gpio_data); + RD_REG_DWORD(®->gpiod); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon off).\n"); + return QLA_FUNCTION_FAILED; + } + + if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to get fw options (beacon off).\n"); + return QLA_FUNCTION_FAILED; + } + + return QLA_SUCCESS; +} + + +/* + * Flash support routines + */ + +/** + * qla2x00_flash_enable() - Setup flash for reading and writing. + * @ha: HA context + */ +static void +qla2x00_flash_enable(scsi_qla_host_t *ha) +{ + uint16_t data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + data = RD_REG_WORD(®->ctrl_status); + data |= CSR_FLASH_ENABLE; + WRT_REG_WORD(®->ctrl_status, data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ +} + +/** + * qla2x00_flash_disable() - Disable flash and allow RISC to run. + * @ha: HA context + */ +static void +qla2x00_flash_disable(scsi_qla_host_t *ha) +{ + uint16_t data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + data = RD_REG_WORD(®->ctrl_status); + data &= ~(CSR_FLASH_ENABLE); + WRT_REG_WORD(®->ctrl_status, data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ +} + +/** + * qla2x00_read_flash_byte() - Reads a byte from flash + * @ha: HA context + * @addr: Address in flash to read + * + * A word is read from the chip, but, only the lower byte is valid. + * + * Returns the byte read from flash @addr. + */ +static uint8_t +qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr) +{ + uint16_t data; + uint16_t bank_select; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + bank_select = RD_REG_WORD(®->ctrl_status); + + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + /* Specify 64K address range: */ + /* clear out Module Select and Flash Address bits [19:16]. */ + bank_select &= ~0xf8; + bank_select |= addr >> 12 & 0xf0; + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + data = RD_REG_WORD(®->flash_data); + + return (uint8_t)data; + } + + /* Setup bit 16 of flash address. */ + if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } else if (((addr & BIT_16) == 0) && + (bank_select & CSR_FLASH_64K_BANK)) { + bank_select &= ~(CSR_FLASH_64K_BANK); + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } + + /* Always perform IO mapped accesses to the FLASH registers. */ + if (ha->pio_address) { + uint16_t data2; + + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); + do { + data = RD_REG_WORD_PIO(®->flash_data); + barrier(); + cpu_relax(); + data2 = RD_REG_WORD_PIO(®->flash_data); + } while (data != data2); + } else { + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + data = qla2x00_debounce_register(®->flash_data); + } + + return (uint8_t)data; +} + +/** + * qla2x00_write_flash_byte() - Write a byte to flash + * @ha: HA context + * @addr: Address in flash to write + * @data: Data to write + */ +static void +qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data) +{ + uint16_t bank_select; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + bank_select = RD_REG_WORD(®->ctrl_status); + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + /* Specify 64K address range: */ + /* clear out Module Select and Flash Address bits [19:16]. */ + bank_select &= ~0xf8; + bank_select |= addr >> 12 & 0xf0; + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + WRT_REG_WORD(®->flash_data, (uint16_t)data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + + return; + } + + /* Setup bit 16 of flash address. */ + if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { + bank_select |= CSR_FLASH_64K_BANK; + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } else if (((addr & BIT_16) == 0) && + (bank_select & CSR_FLASH_64K_BANK)) { + bank_select &= ~(CSR_FLASH_64K_BANK); + WRT_REG_WORD(®->ctrl_status, bank_select); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } + + /* Always perform IO mapped accesses to the FLASH registers. */ + if (ha->pio_address) { + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); + WRT_REG_WORD_PIO(®->flash_data, (uint16_t)data); + } else { + WRT_REG_WORD(®->flash_address, (uint16_t)addr); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + WRT_REG_WORD(®->flash_data, (uint16_t)data); + RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ + } +} + +/** + * qla2x00_poll_flash() - Polls flash for completion. + * @ha: HA context + * @addr: Address in flash to poll + * @poll_data: Data to be polled + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * This function polls the device until bit 7 of what is read matches data + * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed + * out (a fatal error). The flash book recommeds reading bit 7 again after + * reading bit 5 as a 1. + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data, + uint8_t man_id, uint8_t flash_id) +{ + int status; + uint8_t flash_data; + uint32_t cnt; + + status = 1; + + /* Wait for 30 seconds for command to finish. */ + poll_data &= BIT_7; + for (cnt = 3000000; cnt; cnt--) { + flash_data = qla2x00_read_flash_byte(ha, addr); + if ((flash_data & BIT_7) == poll_data) { + status = 0; + break; + } + + if (man_id != 0x40 && man_id != 0xda) { + if ((flash_data & BIT_5) && cnt > 2) + cnt = 2; + } + udelay(10); + barrier(); + } + return status; +} + +#define IS_OEM_001(ha) \ + ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322 && \ + (ha)->pdev->subsystem_vendor == 0x1028 && \ + (ha)->pdev->subsystem_device == 0x0170) + +/** + * qla2x00_program_flash_address() - Programs a flash address + * @ha: HA context + * @addr: Address in flash to program + * @data: Data to be written in flash + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data, + uint8_t man_id, uint8_t flash_id) +{ + /* Write Program Command Sequence. */ + if (IS_OEM_001(ha)) { + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0xa0); + qla2x00_write_flash_byte(ha, addr, data); + } else { + if (man_id == 0xda && flash_id == 0xc1) { + qla2x00_write_flash_byte(ha, addr, data); + if (addr & 0x7e) + return 0; + } else { + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0xa0); + qla2x00_write_flash_byte(ha, addr, data); + } + } + + udelay(150); + + /* Wait for write to complete. */ + return qla2x00_poll_flash(ha, addr, data, man_id, flash_id); +} + +/** + * qla2x00_erase_flash() - Erase the flash. + * @ha: HA context + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id) +{ + /* Individual Sector Erase Command Sequence */ + if (IS_OEM_001(ha)) { + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0x80); + qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); + qla2x00_write_flash_byte(ha, 0x555, 0x55); + qla2x00_write_flash_byte(ha, 0xaaa, 0x10); + } else { + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x80); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x10); + } + + udelay(150); + + /* Wait for erase to complete. */ + return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id); +} + +/** + * qla2x00_erase_flash_sector() - Erase a flash sector. + * @ha: HA context + * @addr: Flash sector to erase + * @sec_mask: Sector address mask + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + * + * Returns 0 on success, else non-zero. + */ +static int +qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr, + uint32_t sec_mask, uint8_t man_id, uint8_t flash_id) +{ + /* Individual Sector Erase Command Sequence */ + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x80); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + if (man_id == 0x1f && flash_id == 0x13) + qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10); + else + qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30); + + udelay(150); + + /* Wait for erase to complete. */ + return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id); +} + +/** + * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip. + * @man_id: Flash manufacturer ID + * @flash_id: Flash ID + */ +static void +qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id, + uint8_t *flash_id) +{ + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0x90); + *man_id = qla2x00_read_flash_byte(ha, 0x0000); + *flash_id = qla2x00_read_flash_byte(ha, 0x0001); + qla2x00_write_flash_byte(ha, 0x5555, 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); + qla2x00_write_flash_byte(ha, 0x5555, 0xf0); +} + + +static inline void +qla2x00_suspend_hba(struct scsi_qla_host *ha) +{ + int cnt; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Pause RISC. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); + RD_REG_WORD(®->hccr); + if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { + for (cnt = 0; cnt < 30000; cnt++) { + if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) + break; + udelay(100); + } + } else { + udelay(10); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +static inline void +qla2x00_resume_hba(struct scsi_qla_host *ha) +{ + /* Resume HBA. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + up(ha->dpc_wait); + qla2x00_wait_for_hba_online(ha); + scsi_unblock_requests(ha->host); +} + +uint8_t * +qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + unsigned long flags; + uint32_t addr, midpoint; + uint8_t *data; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + qla2x00_suspend_hba(ha); + + /* Go with read. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + midpoint = ha->optrom_size / 2; + + qla2x00_flash_enable(ha); + WRT_REG_WORD(®->nvram, 0); + RD_REG_WORD(®->nvram); /* PCI Posting. */ + for (addr = offset, data = buf; addr < length; addr++, data++) { + if (addr == midpoint) { + WRT_REG_WORD(®->nvram, NVR_SELECT); + RD_REG_WORD(®->nvram); /* PCI Posting. */ + } + + *data = qla2x00_read_flash_byte(ha, addr); + } + qla2x00_flash_disable(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Resume HBA. */ + qla2x00_resume_hba(ha); + + return buf; +} + +int +qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + + int rval; + unsigned long flags; + uint8_t man_id, flash_id, sec_number, data; + uint16_t wd; + uint32_t addr, liter, sec_mask, rest_addr; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + /* Suspend HBA. */ + qla2x00_suspend_hba(ha); + + rval = QLA_SUCCESS; + sec_number = 0; + + /* Reset ISP chip. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); + pci_read_config_word(ha->pdev, PCI_COMMAND, &wd); + + /* Go with write. */ + qla2x00_flash_enable(ha); + do { /* Loop once to provide quick error exit */ + /* Structure of flash memory based on manufacturer */ + if (IS_OEM_001(ha)) { + /* OEM variant with special flash part. */ + man_id = flash_id = 0; + rest_addr = 0xffff; + sec_mask = 0x10000; + goto update_flash; + } + qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id); + switch (man_id) { + case 0x20: /* ST flash. */ + if (flash_id == 0xd2 || flash_id == 0xe3) { + /* + * ST m29w008at part - 64kb sector size with + * 32kb,8kb,8kb,16kb sectors at memory address + * 0xf0000. + */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } + /* + * ST m29w010b part - 16kb sector size + * Default to 16kb sectors + */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + case 0x40: /* Mostel flash. */ + /* Mostel v29c51001 part - 512 byte sector size. */ + rest_addr = 0x1ff; + sec_mask = 0x1fe00; + break; + case 0xbf: /* SST flash. */ + /* SST39sf10 part - 4kb sector size. */ + rest_addr = 0xfff; + sec_mask = 0x1f000; + break; + case 0xda: /* Winbond flash. */ + /* Winbond W29EE011 part - 256 byte sector size. */ + rest_addr = 0x7f; + sec_mask = 0x1ff80; + break; + case 0xc2: /* Macronix flash. */ + /* 64k sector size. */ + if (flash_id == 0x38 || flash_id == 0x4f) { + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } + /* Fall through... */ + + case 0x1f: /* Atmel flash. */ + /* 512k sector size. */ + if (flash_id == 0x13) { + rest_addr = 0x7fffffff; + sec_mask = 0x80000000; + break; + } + /* Fall through... */ + + case 0x01: /* AMD flash. */ + if (flash_id == 0x38 || flash_id == 0x40 || + flash_id == 0x4f) { + /* Am29LV081 part - 64kb sector size. */ + /* Am29LV002BT part - 64kb sector size. */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } else if (flash_id == 0x3e) { + /* + * Am29LV008b part - 64kb sector size with + * 32kb,8kb,8kb,16kb sector at memory address + * h0xf0000. + */ + rest_addr = 0xffff; + sec_mask = 0x10000; + break; + } else if (flash_id == 0x20 || flash_id == 0x6e) { + /* + * Am29LV010 part or AM29f010 - 16kb sector + * size. + */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + } else if (flash_id == 0x6d) { + /* Am29LV001 part - 8kb sector size. */ + rest_addr = 0x1fff; + sec_mask = 0x1e000; + break; + } + default: + /* Default to 16 kb sector size. */ + rest_addr = 0x3fff; + sec_mask = 0x1c000; + break; + } + +update_flash: + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + if (qla2x00_erase_flash(ha, man_id, flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + } + + for (addr = offset, liter = 0; liter < length; liter++, + addr++) { + data = buf[liter]; + /* Are we at the beginning of a sector? */ + if ((addr & rest_addr) == 0) { + if (IS_QLA2322(ha) || IS_QLA6322(ha)) { + if (addr >= 0x10000UL) { + if (((addr >> 12) & 0xf0) && + ((man_id == 0x01 && + flash_id == 0x3e) || + (man_id == 0x20 && + flash_id == 0xd2))) { + sec_number++; + if (sec_number == 1) { + rest_addr = + 0x7fff; + sec_mask = + 0x18000; + } else if ( + sec_number == 2 || + sec_number == 3) { + rest_addr = + 0x1fff; + sec_mask = + 0x1e000; + } else if ( + sec_number == 4) { + rest_addr = + 0x3fff; + sec_mask = + 0x1c000; + } + } + } + } else if (addr == ha->optrom_size / 2) { + WRT_REG_WORD(®->nvram, NVR_SELECT); + RD_REG_WORD(®->nvram); + } + + if (flash_id == 0xda && man_id == 0xc1) { + qla2x00_write_flash_byte(ha, 0x5555, + 0xaa); + qla2x00_write_flash_byte(ha, 0x2aaa, + 0x55); + qla2x00_write_flash_byte(ha, 0x5555, + 0xa0); + } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) { + /* Then erase it */ + if (qla2x00_erase_flash_sector(ha, + addr, sec_mask, man_id, + flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + if (man_id == 0x01 && flash_id == 0x6d) + sec_number++; + } + } + + if (man_id == 0x01 && flash_id == 0x6d) { + if (sec_number == 1 && + addr == (rest_addr - 1)) { + rest_addr = 0x0fff; + sec_mask = 0x1f000; + } else if (sec_number == 3 && (addr & 0x7ffe)) { + rest_addr = 0x3fff; + sec_mask = 0x1c000; + } + } + + if (qla2x00_program_flash_address(ha, addr, data, + man_id, flash_id)) { + rval = QLA_FUNCTION_FAILED; + break; + } + } + } while (0); + qla2x00_flash_disable(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Resume HBA. */ + qla2x00_resume_hba(ha); + + return rval; +} + +uint8_t * +qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Go with read. */ + qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2); + + /* Resume HBA. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + ha->isp_ops.enable_intrs(ha); + scsi_unblock_requests(ha->host); + + return buf; +} + +int +qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + int rval; + + /* Suspend HBA. */ + scsi_block_requests(ha->host); + ha->isp_ops.disable_intrs(ha); + set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + + /* Go with write. */ + rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2, + length >> 2); + + /* Resume HBA -- RISC reset needed. */ + clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + up(ha->dpc_wait); + qla2x00_wait_for_hba_online(ha); + scsi_unblock_requests(ha->host); + + return rval; +} |