diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_fw.h')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_fw.h | 106 |
1 files changed, 105 insertions, 1 deletions
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 42c5587cc50c..93f833960147 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -400,6 +400,7 @@ struct cmd_type_6 { struct scsi_lun lun; /* FCP LUN (BE). */ uint16_t control_flags; /* Control flags. */ +#define CF_DIF_SEG_DESCR_ENABLE BIT_3 #define CF_DATA_SEG_DESCR_ENABLE BIT_2 #define CF_READ_DATA BIT_1 #define CF_WRITE_DATA BIT_0 @@ -466,6 +467,43 @@ struct cmd_type_7 { uint32_t dseg_0_len; /* Data segment 0 length. */ }; +#define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6) + * (T10-DIF) */ +struct cmd_type_crc_2 { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t nport_handle; /* N_PORT handle. */ + uint16_t timeout; /* Command timeout. */ + + uint16_t dseg_count; /* Data segment count. */ + + uint16_t fcp_rsp_dseg_len; /* FCP_RSP DSD length. */ + + struct scsi_lun lun; /* FCP LUN (BE). */ + + uint16_t control_flags; /* Control flags. */ + + uint16_t fcp_cmnd_dseg_len; /* Data segment length. */ + uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */ + + uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */ + + uint32_t byte_count; /* Total byte count. */ + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + uint32_t crc_context_address[2]; /* Data segment address. */ + uint16_t crc_context_len; /* Data segment length. */ + uint16_t reserved_1; /* MUST be set to 0. */ +}; + + /* * ISP queue - status entry structure definition. */ @@ -496,10 +534,17 @@ struct sts_entry_24xx { uint32_t sense_len; /* FCP SENSE length. */ uint32_t rsp_data_len; /* FCP response data length. */ - uint8_t data[28]; /* FCP response/sense information. */ + /* + * If DIF Error is set in comp_status, these additional fields are + * defined: + * &data[10] : uint8_t report_runt_bg[2]; - computed guard + * &data[12] : uint8_t actual_dif[8]; - DIF Data recieved + * &data[20] : uint8_t expected_dif[8]; - DIF Data computed + */ }; + /* * Status entry completion status */ @@ -841,6 +886,8 @@ struct device_reg_24xx { #define FA_HW_EVENT_ENTRY_SIZE 4 #define FA_NPIV_CONF0_ADDR 0x5C000 #define FA_NPIV_CONF1_ADDR 0x5D000 +#define FA_FCP_PRIO0_ADDR 0x10000 +#define FA_FCP_PRIO1_ADDR 0x12000 /* * Flash Error Log Event Codes. @@ -1274,6 +1321,8 @@ struct qla_flt_header { #define FLT_REG_NPIV_CONF_0 0x29 #define FLT_REG_NPIV_CONF_1 0x2a #define FLT_REG_GOLD_FW 0x2f +#define FLT_REG_FCP_PRIO_0 0x87 +#define FLT_REG_FCP_PRIO_1 0x88 struct qla_flt_region { uint32_t code; @@ -1750,6 +1799,61 @@ struct ex_init_cb_81xx { #define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000 #define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000 +/* FCP priority config defines *************************************/ +/* operations */ +#define QLFC_FCP_PRIO_DISABLE 0x0 +#define QLFC_FCP_PRIO_ENABLE 0x1 +#define QLFC_FCP_PRIO_GET_CONFIG 0x2 +#define QLFC_FCP_PRIO_SET_CONFIG 0x3 + +struct qla_fcp_prio_entry { + uint16_t flags; /* Describes parameter(s) in FCP */ + /* priority entry that are valid */ +#define FCP_PRIO_ENTRY_VALID 0x1 +#define FCP_PRIO_ENTRY_TAG_VALID 0x2 +#define FCP_PRIO_ENTRY_SPID_VALID 0x4 +#define FCP_PRIO_ENTRY_DPID_VALID 0x8 +#define FCP_PRIO_ENTRY_LUNB_VALID 0x10 +#define FCP_PRIO_ENTRY_LUNE_VALID 0x20 +#define FCP_PRIO_ENTRY_SWWN_VALID 0x40 +#define FCP_PRIO_ENTRY_DWWN_VALID 0x80 + uint8_t tag; /* Priority value */ + uint8_t reserved; /* Reserved for future use */ + uint32_t src_pid; /* Src port id. high order byte */ + /* unused; -1 (wild card) */ + uint32_t dst_pid; /* Src port id. high order byte */ + /* unused; -1 (wild card) */ + uint16_t lun_beg; /* 1st lun num of lun range. */ + /* -1 (wild card) */ + uint16_t lun_end; /* 2nd lun num of lun range. */ + /* -1 (wild card) */ + uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */ + uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */ +}; + +struct qla_fcp_prio_cfg { + uint8_t signature[4]; /* "HQOS" signature of config data */ + uint16_t version; /* 1: Initial version */ + uint16_t length; /* config data size in num bytes */ + uint16_t checksum; /* config data bytes checksum */ + uint16_t num_entries; /* Number of entries */ + uint16_t size_of_entry; /* Size of each entry in num bytes */ + uint8_t attributes; /* enable/disable, persistence */ +#define FCP_PRIO_ATTR_DISABLE 0x0 +#define FCP_PRIO_ATTR_ENABLE 0x1 +#define FCP_PRIO_ATTR_PERSIST 0x2 + uint8_t reserved; /* Reserved for future use */ +#define FCP_PRIO_CFG_HDR_SIZE 0x10 + struct qla_fcp_prio_entry entry[1]; /* fcp priority entries */ +#define FCP_PRIO_CFG_ENTRY_SIZE 0x20 +}; + +#define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/ + +/* 25XX Support ****************************************************/ +#define FA_FCP_PRIO0_ADDR_25 0x3C000 +#define FA_FCP_PRIO1_ADDR_25 0x3E000 + /* 81XX Flash locations -- occupies second 2MB region. */ #define FA_BOOT_CODE_ADDR_81 0x80000 #define FA_RISC_CODE_ADDR_81 0xA0000 |