diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 136 |
1 files changed, 39 insertions, 97 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index e0c5bb54b258..714ee67567e1 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -176,8 +176,7 @@ /* ISP request and response entry counts (37-65535) */ #define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */ #define REQUEST_ENTRY_CNT_2200 2048 /* Number of request entries. */ -#define REQUEST_ENTRY_CNT_2XXX_EXT_MEM 4096 /* Number of request entries. */ -#define REQUEST_ENTRY_CNT_24XX 4096 /* Number of request entries. */ +#define REQUEST_ENTRY_CNT_24XX 2048 /* Number of request entries. */ #define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/ #define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/ @@ -201,20 +200,7 @@ typedef struct srb { /* * SRB flag definitions */ -#define SRB_TIMEOUT BIT_0 /* Command timed out */ -#define SRB_DMA_VALID BIT_1 /* Command sent to ISP */ -#define SRB_WATCHDOG BIT_2 /* Command on watchdog list */ -#define SRB_ABORT_PENDING BIT_3 /* Command abort sent to device */ - -#define SRB_ABORTED BIT_4 /* Command aborted command already */ -#define SRB_RETRY BIT_5 /* Command needs retrying */ -#define SRB_GOT_SENSE BIT_6 /* Command has sense data */ -#define SRB_FAILOVER BIT_7 /* Command in failover state */ - -#define SRB_BUSY BIT_8 /* Command is in busy retry state */ -#define SRB_FO_CANCEL BIT_9 /* Command don't need to do failover */ -#define SRB_IOCTL BIT_10 /* IOCTL command. */ -#define SRB_TAPE BIT_11 /* FCP2 (Tape) command. */ +#define SRB_DMA_VALID BIT_0 /* Command sent to ISP */ /* * ISP I/O Register Set structure definitions. @@ -372,10 +358,10 @@ struct device_reg_2xxx { }; struct device_reg_25xxmq { - volatile uint32_t req_q_in; - volatile uint32_t req_q_out; - volatile uint32_t rsp_q_in; - volatile uint32_t rsp_q_out; + uint32_t req_q_in; + uint32_t req_q_out; + uint32_t rsp_q_in; + uint32_t rsp_q_out; }; typedef union { @@ -620,6 +606,7 @@ typedef struct { #define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */ #define MBC_TRACE_CONTROL 0x27 /* Trace control command. */ #define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */ +#define MBC_WRITE_SFP 0x30 /* Write SFP Data. */ #define MBC_READ_SFP 0x31 /* Read SFP Data. */ #define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */ #define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */ @@ -1570,39 +1557,13 @@ typedef struct fc_port { #define FCS_DEVICE_DEAD 2 #define FCS_DEVICE_LOST 3 #define FCS_ONLINE 4 -#define FCS_NOT_SUPPORTED 5 -#define FCS_FAILOVER 6 -#define FCS_FAILOVER_FAILED 7 /* * FC port flags. */ #define FCF_FABRIC_DEVICE BIT_0 #define FCF_LOGIN_NEEDED BIT_1 -#define FCF_FO_MASKED BIT_2 -#define FCF_FAILOVER_NEEDED BIT_3 -#define FCF_RESET_NEEDED BIT_4 -#define FCF_PERSISTENT_BOUND BIT_5 -#define FCF_TAPE_PRESENT BIT_6 -#define FCF_FARP_DONE BIT_7 -#define FCF_FARP_FAILED BIT_8 -#define FCF_FARP_REPLY_NEEDED BIT_9 -#define FCF_AUTH_REQ BIT_10 -#define FCF_SEND_AUTH_REQ BIT_11 -#define FCF_RECEIVE_AUTH_REQ BIT_12 -#define FCF_AUTH_SUCCESS BIT_13 -#define FCF_RLC_SUPPORT BIT_14 -#define FCF_CONFIG BIT_15 /* Needed? */ -#define FCF_RESCAN_NEEDED BIT_16 -#define FCF_XP_DEVICE BIT_17 -#define FCF_MSA_DEVICE BIT_18 -#define FCF_EVA_DEVICE BIT_19 -#define FCF_MSA_PORT_ACTIVE BIT_20 -#define FCF_FAILBACK_DISABLE BIT_21 -#define FCF_FAILOVER_DISABLE BIT_22 -#define FCF_DSXXX_DEVICE BIT_23 -#define FCF_AA_EVA_DEVICE BIT_24 -#define FCF_AA_MSA_DEVICE BIT_25 +#define FCF_TAPE_PRESENT BIT_2 /* No loop ID flag. */ #define FC_NO_LOOP_ID 0x1000 @@ -2102,9 +2063,6 @@ struct isp_operations { int (*get_flash_version) (struct scsi_qla_host *, void *); int (*start_scsi) (srb_t *); - void (*wrt_req_reg) (struct qla_hw_data *, uint16_t, uint16_t); - void (*wrt_rsp_reg) (struct qla_hw_data *, uint16_t, uint16_t); - uint16_t (*rd_req_reg) (struct qla_hw_data *, uint16_t); }; /* MSI-X Support *************************************************************/ @@ -2200,6 +2158,8 @@ struct rsp_que { dma_addr_t dma; response_t *ring; response_t *ring_ptr; + uint32_t __iomem *rsp_q_in; /* FWI2-capable only. */ + uint32_t __iomem *rsp_q_out; uint16_t ring_index; uint16_t out_ptr; uint16_t length; @@ -2217,6 +2177,8 @@ struct req_que { dma_addr_t dma; request_t *ring; request_t *ring_ptr; + uint32_t __iomem *req_q_in; /* FWI2-capable only. */ + uint32_t __iomem *req_q_out; uint16_t ring_index; uint16_t in_ptr; uint16_t cnt; @@ -2256,10 +2218,10 @@ struct qla_hw_data { uint32_t msix_enabled :1; uint32_t disable_serdes :1; uint32_t gpsc_supported :1; - uint32_t vsan_enabled :1; uint32_t npiv_supported :1; uint32_t fce_enabled :1; - uint32_t hw_event_marker_found:1; + uint32_t fac_supported :1; + uint32_t chip_reset_done :1; } flags; /* This spinlock is used to protect "io transactions", you must @@ -2277,7 +2239,7 @@ struct qla_hw_data { #define MIN_IOBASE_LEN 0x100 /* Multi queue data structs */ - device_reg_t *mqiobase; + device_reg_t __iomem *mqiobase; uint16_t msix_count; uint8_t mqenable; struct req_que **req_q_map; @@ -2300,7 +2262,6 @@ struct qla_hw_data { uint16_t max_loop_id; uint16_t fb_rev; - uint16_t max_public_loop_ids; uint16_t min_external_loopid; /* First external loop Id */ #define PORT_SPEED_UNKNOWN 0xFFFF @@ -2381,6 +2342,8 @@ struct qla_hw_data { IS_QLA25XX(ha) || IS_QLA81XX(ha)) #define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \ (ha)->flags.msix_enabled) +#define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha)) +#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha)) #define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA) #define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2) @@ -2425,6 +2388,10 @@ struct qla_hw_data { void *sfp_data; dma_addr_t sfp_data_dma; + uint8_t *edc_data; + dma_addr_t edc_data_dma; + uint16_t edc_data_len; + struct task_struct *dpc_thread; uint8_t dpc_active; /* DPC routine is active */ @@ -2439,6 +2406,8 @@ struct qla_hw_data { dma_addr_t init_cb_dma; init_cb_t *init_cb; int init_cb_size; + dma_addr_t ex_init_cb_dma; + struct ex_init_cb_81xx *ex_init_cb; /* These are used by mailbox operations. */ volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT]; @@ -2453,15 +2422,6 @@ struct qla_hw_data { struct completion mbx_cmd_comp; /* Serialize mbx access */ struct completion mbx_intr_comp; /* Used for completion notification */ - uint32_t mbx_flags; -#define MBX_IN_PROGRESS BIT_0 -#define MBX_BUSY BIT_1 /* Got the Access */ -#define MBX_SLEEPING_ON_SEM BIT_2 -#define MBX_POLLING_FOR_COMP BIT_3 -#define MBX_COMPLETED BIT_4 -#define MBX_TIMEDOUT BIT_5 -#define MBX_ACCESS_TIMEDOUT BIT_6 - /* Basic firmware related information. */ uint16_t fw_major_version; uint16_t fw_minor_version; @@ -2473,13 +2433,15 @@ struct qla_hw_data { #define RISC_START_ADDRESS_2100 0x1000 #define RISC_START_ADDRESS_2300 0x800 #define RISC_START_ADDRESS_2400 0x100000 + uint16_t fw_xcb_count; uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */ uint8_t fw_seriallink_options[4]; uint16_t fw_seriallink_options24[4]; - uint8_t mpi_version[4]; + uint8_t mpi_version[3]; uint32_t mpi_capabilities; + uint8_t phy_version[3]; /* Firmware dump information. */ struct qla2xxx_fw_dump *fw_dump; @@ -2545,6 +2507,8 @@ struct qla_hw_data { uint32_t flt_region_boot; uint32_t flt_region_fw; uint32_t flt_region_vpd_nvram; + uint32_t flt_region_vpd; + uint32_t flt_region_nvram; uint32_t flt_region_npiv_conf; /* Needed for BEACON */ @@ -2613,36 +2577,19 @@ typedef struct scsi_qla_host { #define LOOP_RESYNC_ACTIVE 5 #define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */ #define RSCN_UPDATE 7 /* Perform an RSCN update. */ -#define MAILBOX_RETRY 8 -#define ISP_RESET_NEEDED 9 /* Initiate a ISP reset. */ -#define FAILOVER_EVENT_NEEDED 10 -#define FAILOVER_EVENT 11 -#define FAILOVER_NEEDED 12 -#define SCSI_RESTART_NEEDED 13 /* Processes SCSI retry queue. */ -#define PORT_RESTART_NEEDED 14 /* Processes Retry queue. */ -#define RESTART_QUEUES_NEEDED 15 /* Restarts the Lun queue. */ -#define ABORT_QUEUES_NEEDED 16 -#define RELOGIN_NEEDED 17 -#define LOGIN_RETRY_NEEDED 18 /* Initiate required fabric logins. */ -#define REGISTER_FC4_NEEDED 19 /* SNS FC4 registration required. */ -#define ISP_ABORT_RETRY 20 /* ISP aborted. */ -#define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */ -#define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */ -#define IOCTL_ERROR_RECOVERY 23 -#define LOOP_RESET_NEEDED 24 -#define BEACON_BLINK_NEEDED 25 -#define REGISTER_FDMI_NEEDED 26 -#define FCPORT_UPDATE_NEEDED 27 -#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */ -#define UNLOADING 29 -#define NPIV_CONFIG_NEEDED 30 +#define RELOGIN_NEEDED 8 +#define REGISTER_FC4_NEEDED 9 /* SNS FC4 registration required. */ +#define ISP_ABORT_RETRY 10 /* ISP aborted. */ +#define BEACON_BLINK_NEEDED 11 +#define REGISTER_FDMI_NEEDED 12 +#define FCPORT_UPDATE_NEEDED 13 +#define VP_DPC_NEEDED 14 /* wake up for VP dpc handling */ +#define UNLOADING 15 +#define NPIV_CONFIG_NEEDED 16 uint32_t device_flags; -#define DFLG_LOCAL_DEVICES BIT_0 -#define DFLG_RETRY_LOCAL_DEVICES BIT_1 -#define DFLG_FABRIC_DEVICES BIT_2 -#define SWITCH_FOUND BIT_3 -#define DFLG_NO_CABLE BIT_4 +#define SWITCH_FOUND BIT_0 +#define DFLG_NO_CABLE BIT_1 srb_t *status_srb; /* Status continuation entry. */ @@ -2755,10 +2702,5 @@ typedef struct scsi_qla_host { #include "qla_inline.h" #define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) -#define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual) -#define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual) -#define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status) -#define CMD_ACTUAL_SNSLEN(Cmnd) ((Cmnd)->SCp.Message) -#define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) #endif |