diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 190 |
1 files changed, 10 insertions, 180 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 53508f3c4ae9..6734453ea28a 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -31,6 +31,8 @@ #include <scsi/scsi_cmnd.h> #include <scsi/scsi_transport_fc.h> +#define QLA2XXX_DRIVER_NAME "qla2xxx" + /* * We have MAILBOX_REGISTER_COUNT sized arrays in a few places, * but that's fine as we don't look at the last 24 ones for @@ -189,22 +191,13 @@ typedef struct srb { struct scsi_cmnd *cmd; /* Linux SCSI command pkt */ - struct timer_list timer; /* Command timer */ - atomic_t ref_count; /* Reference count for this structure */ uint16_t flags; - /* Request state */ - uint16_t state; - /* Single transfer DMA context */ dma_addr_t dma_handle; uint32_t request_sense_length; uint8_t *request_sense_ptr; - - /* SRB magic number */ - uint16_t magic; -#define SRB_MAGIC 0x10CB } srb_t; /* @@ -226,21 +219,6 @@ typedef struct srb { #define SRB_TAPE BIT_11 /* FCP2 (Tape) command. */ /* - * SRB state definitions - */ -#define SRB_FREE_STATE 0 /* returned back */ -#define SRB_PENDING_STATE 1 /* queued in LUN Q */ -#define SRB_ACTIVE_STATE 2 /* in Active Array */ -#define SRB_DONE_STATE 3 /* queued in Done Queue */ -#define SRB_RETRY_STATE 4 /* in Retry Queue */ -#define SRB_SUSPENDED_STATE 5 /* in suspended state */ -#define SRB_NO_QUEUE_STATE 6 /* is in between states */ -#define SRB_ACTIVE_TIMEOUT_STATE 7 /* in Active Array but timed out */ -#define SRB_FAILOVER_STATE 8 /* in Failover Queue */ -#define SRB_SCSI_RETRY_STATE 9 /* in Scsi Retry Queue */ - - -/* * ISP I/O Register Set structure definitions. */ struct device_reg_2xxx { @@ -270,6 +248,8 @@ struct device_reg_2xxx { #define NVR_SELECT BIT_1 #define NVR_CLOCK BIT_0 +#define NVR_WAIT_CNT 20000 + union { struct { uint16_t mailbox0; @@ -1514,62 +1494,6 @@ typedef struct { } sw_info_t; /* - * Inquiry command structure. - */ -#define INQ_DATA_SIZE 36 - -/* - * Inquiry mailbox IOCB packet definition. - */ -typedef struct { - union { - cmd_a64_entry_t cmd; - sts_entry_t rsp; - struct cmd_type_7 cmd24; - struct sts_entry_24xx rsp24; - } p; - uint8_t inq[INQ_DATA_SIZE]; -} inq_cmd_rsp_t; - -/* - * Report LUN command structure. - */ -#define CHAR_TO_SHORT(a, b) (uint16_t)((uint8_t)b << 8 | (uint8_t)a) - -typedef struct { - uint32_t len; - uint32_t rsrv; -} rpt_hdr_t; - -typedef struct { - struct { - uint8_t b : 6; - uint8_t address_method : 2; - } msb; - uint8_t lsb; - uint8_t unused[6]; -} rpt_lun_t; - -typedef struct { - rpt_hdr_t hdr; - rpt_lun_t lst[MAX_LUNS]; -} rpt_lun_lst_t; - -/* - * Report Lun mailbox IOCB packet definition. - */ -typedef struct { - union { - cmd_a64_entry_t cmd; - sts_entry_t rsp; - struct cmd_type_7 cmd24; - struct sts_entry_24xx rsp24; - } p; - rpt_lun_lst_t list; -} rpt_lun_cmd_rsp_t; - - -/* * Fibre channel port type. */ typedef enum { @@ -1587,7 +1511,6 @@ typedef struct { typedef struct fc_port { struct list_head list; struct scsi_qla_host *ha; - struct scsi_qla_host *vis_ha; /* only used when suspending lun */ uint8_t node_name[WWN_SIZE]; uint8_t port_name[WWN_SIZE]; @@ -1602,23 +1525,13 @@ typedef struct fc_port { unsigned int os_target_id; - uint16_t iodesc_idx_sent; - int port_login_retry_count; int login_retry; atomic_t port_down_timer; - uint8_t device_type; - uint8_t unused; - - uint8_t mp_byte; /* multi-path byte (not used) */ - uint8_t cur_path; /* current path id */ - spinlock_t rport_lock; struct fc_rport *rport, *drport; u32 supported_classes; - struct work_struct rport_add_work; - struct work_struct rport_del_work; } fc_port_t; /* @@ -2027,54 +1940,6 @@ struct sns_cmd_pkt { } p; }; -/* IO descriptors */ -#define MAX_IO_DESCRIPTORS 32 - -#define ABORT_IOCB_CB 0 -#define ADISC_PORT_IOCB_CB 1 -#define LOGOUT_PORT_IOCB_CB 2 -#define LOGIN_PORT_IOCB_CB 3 -#define LAST_IOCB_CB 4 - -#define IODESC_INVALID_INDEX 0xFFFF -#define IODESC_ADISC_NEEDED 0xFFFE -#define IODESC_LOGIN_NEEDED 0xFFFD - -struct io_descriptor { - uint16_t used:1; - uint16_t idx:11; - uint16_t cb_idx:4; - - struct timer_list timer; - - struct scsi_qla_host *ha; - - port_id_t d_id; - fc_port_t *remote_fcport; - - uint32_t signature; -}; - -struct qla_fw_info { - unsigned short addressing; /* addressing method used to load fw */ -#define FW_INFO_ADDR_NORMAL 0 -#define FW_INFO_ADDR_EXTENDED 1 -#define FW_INFO_ADDR_NOMORE 0xffff - unsigned short *fwcode; /* pointer to FW array */ - unsigned short *fwlen; /* number of words in array */ - unsigned short *fwstart; /* start address for F/W */ - unsigned long *lfwstart; /* start address (long) for F/W */ -}; - -struct qla_board_info { - char *drv_name; - - char isp_name[8]; - struct qla_fw_info *fw_info; - char *fw_fname; - struct scsi_host_template *sht; -}; - struct fw_blob { char *name; uint32_t segs[4]; @@ -2269,7 +2134,7 @@ typedef struct scsi_qla_host { mempool_t *srb_mempool; /* This spinlock is used to protect "io transactions", you must - * aquire it before doing any IO to the card, eg with RD_REG*() and + * acquire it before doing any IO to the card, eg with RD_REG*() and * WRT_REG*() for the duration of your entire commandtransaction. * * This spinlock is of lower priority than the io request lock. @@ -2303,9 +2168,6 @@ typedef struct scsi_qla_host { uint32_t current_outstanding_cmd; srb_t *status_srb; /* Status continuation entry. */ - uint16_t revision; - uint8_t ports; - /* ISP configuration data. */ uint16_t loop_id; /* Host adapter loop id */ uint16_t fb_rev; @@ -2361,10 +2223,6 @@ typedef struct scsi_qla_host { /* Fibre Channel Device List. */ struct list_head fcports; - struct list_head rscn_fcports; - - struct io_descriptor io_descriptors[MAX_IO_DESCRIPTORS]; - uint16_t iodesc_signature; /* RSCN queue. */ uint32_t rscn_queue[MAX_RSCN_COUNT]; @@ -2395,9 +2253,6 @@ typedef struct scsi_qla_host { struct gid_list_info *gid_list; int gid_list_info_size; - dma_addr_t rlc_rsp_dma; - rpt_lun_cmd_rsp_t *rlc_rsp; - /* Small DMA pool allocations -- maximum 256 bytes in length. */ #define DMA_POOL_SIZE 256 struct dma_pool *s_dma_pool; @@ -2406,9 +2261,6 @@ typedef struct scsi_qla_host { init_cb_t *init_cb; int init_cb_size; - dma_addr_t iodesc_pd_dma; - port_database_t *iodesc_pd; - /* These are used by mailbox operations. */ volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT]; @@ -2435,13 +2287,16 @@ typedef struct scsi_qla_host { mbx_cmd_t mc; /* Basic firmware related information. */ - struct qla_board_info *brd_info; uint16_t fw_major_version; uint16_t fw_minor_version; uint16_t fw_subminor_version; uint16_t fw_attributes; uint32_t fw_memory_size; uint32_t fw_transfer_size; + uint32_t fw_srisc_address; +#define RISC_START_ADDRESS_2100 0x1000 +#define RISC_START_ADDRESS_2300 0x800 +#define RISC_START_ADDRESS_2400 0x100000 uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */ uint8_t fw_seriallink_options[4]; @@ -2449,15 +2304,11 @@ typedef struct scsi_qla_host { /* Firmware dump information. */ void *fw_dump; - int fw_dump_order; + int fw_dumped; int fw_dump_reading; char *fw_dump_buffer; int fw_dump_buffer_len; - int fw_dumped; - void *fw_dump24; - int fw_dump24_len; - uint8_t host_str[16]; uint32_t pci_attr; @@ -2503,8 +2354,6 @@ typedef struct scsi_qla_host { test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ atomic_read(&ha->loop_state) == LOOP_DOWN) -#define TGT_Q(ha, t) (ha->otgt[t]) - #define to_qla_host(x) ((scsi_qla_host_t *) (x)->hostdata) #define qla_printk(level, ha, format, arg...) \ @@ -2537,19 +2386,6 @@ typedef struct scsi_qla_host { #define QLA_RSCNS_HANDLED 0x108 #define QLA_ALREADY_REGISTERED 0x109 -/* -* Stat info for all adpaters -*/ -struct _qla2x00stats { - unsigned long mboxtout; /* mailbox timeouts */ - unsigned long mboxerr; /* mailbox errors */ - unsigned long ispAbort; /* ISP aborts */ - unsigned long debugNo; - unsigned long loop_resync; - unsigned long outarray_full; - unsigned long retry_q_cnt; -}; - #define NVRAM_DELAY() udelay(10) #define INVALID_HANDLE (MAX_OUTSTANDING_COMMANDS+1) @@ -2565,12 +2401,6 @@ struct _qla2x00stats { #include "qla_dbg.h" #include "qla_inline.h" -/* -* String arrays -*/ -#define LINESIZE 256 -#define MAXARGS 26 - #define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual) #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual) |