diff options
Diffstat (limited to 'drivers/scsi/psi_chip.h')
| -rw-r--r-- | drivers/scsi/psi_chip.h | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/drivers/scsi/psi_chip.h b/drivers/scsi/psi_chip.h new file mode 100644 index 000000000000..224cf8f64c97 --- /dev/null +++ b/drivers/scsi/psi_chip.h @@ -0,0 +1,195 @@ +/*+M************************************************************************* + * Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux. + * + * Copyright (c) 1997 Perceptive Solutions, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * File Name: psi_chip.h + * + * Description: This file contains the interface defines and + * error codes. + * + *-M*************************************************************************/ +#ifndef PSI_CHIP +#define PSI_CHIP + +/************************************************/ +/* Misc konstants */ +/************************************************/ +#define CHIP_MAXDRIVES 8 + +/************************************************/ +/* Chip I/O addresses */ +/************************************************/ +#define CHIP_ADRS_0 0x0130 +#define CHIP_ADRS_1 0x0150 +#define CHIP_ADRS_2 0x0190 +#define CHIP_ADRS_3 0x0210 +#define CHIP_ADRS_4 0x0230 +#define CHIP_ADRS_5 0x0250 + +/************************************************/ +/* EEPROM locations */ +/************************************************/ +#define CHIP_EEPROM_BIOS 0x0000 // BIOS base address +#define CHIP_EEPROM_DATA 0x2000 // SETUP data base address +#define CHIP_EEPROM_FACTORY 0x2400 // FACTORY data base address +#define CHIP_EEPROM_SETUP 0x3000 // SETUP PROGRAM base address + +#define CHIP_EEPROM_SIZE 32768U // size of the entire EEPROM +#define CHIP_EEPROM_BIOS_SIZE 8192 // size of the BIOS in bytes +#define CHIP_EEPROM_DATA_SIZE 4096 // size of factory, setup, log data block in bytes +#define CHIP_EEPROM_SETUP_SIZE 20480U // size of the setup program in bytes + +/************************************************/ +/* Chip Interrupts */ +/************************************************/ +#define CHIP_IRQ_10 0x72 +#define CHIP_IRQ_11 0x73 +#define CHIP_IRQ_12 0x74 + +/************************************************/ +/* Chip Setup addresses */ +/************************************************/ +#define CHIP_SETUP_BASE 0x0000C000L + +/************************************************/ +/* Chip Register address offsets */ +/************************************************/ +#define REG_DATA 0x00 +#define REG_ERROR 0x01 +#define REG_SECTOR_COUNT 0x02 +#define REG_LBA_0 0x03 +#define REG_LBA_8 0x04 +#define REG_LBA_16 0x05 +#define REG_LBA_24 0x06 +#define REG_STAT_CMD 0x07 +#define REG_SEL_FAIL 0x08 +#define REG_IRQ_STATUS 0x09 +#define REG_ADDRESS 0x0A +#define REG_FAIL 0x0C +#define REG_ALT_STAT 0x0E +#define REG_DRIVE_ADRS 0x0F + +/************************************************/ +/* Chip RAM locations */ +/************************************************/ +#define CHIP_DEVICE 0x8000 +#define CHIP_DEVICE_0 0x8000 +#define CHIP_DEVICE_1 0x8008 +#define CHIP_DEVICE_2 0x8010 +#define CHIP_DEVICE_3 0x8018 +#define CHIP_DEVICE_4 0x8020 +#define CHIP_DEVICE_5 0x8028 +#define CHIP_DEVICE_6 0x8030 +#define CHIP_DEVICE_7 0x8038 +typedef struct + { + UCHAR channel; // channel of this device (0-8). + UCHAR spt; // Sectors Per Track. + ULONG spc; // Sectors Per Cylinder. + } CHIP_DEVICE_N; + +#define CHIP_CONFIG 0x8100 // address of boards configuration. +typedef struct + { + UCHAR irq; // interrupt request channel number + UCHAR numDrives; // Number of accessible drives + UCHAR fastFormat; // Boolean for fast format enable + } CHIP_CONFIG_N; + +#define CHIP_MAP 0x8108 // eight byte device type map. + + +#define CHIP_RAID 0x8120 // array of RAID signature structures and LBA +#define CHIP_RAID_1 0x8120 +#define CHIP_RAID_2 0x8130 +#define CHIP_RAID_3 0x8140 +#define CHIP_RAID_4 0x8150 + +/************************************************/ +/* Chip Register Masks */ +/************************************************/ +#define CHIP_ID 0x7B +#define SEL_RAM 0x8000 +#define MASK_FAIL 0x80 + +/************************************************/ +/* Chip cable select bits */ +/************************************************/ +#define SECTORSXFER 8 + +/************************************************/ +/* Chip cable select bits */ +/************************************************/ +#define SEL_NONE 0x00 +#define SEL_1 0x01 +#define SEL_2 0x02 +#define SEL_3 0x04 +#define SEL_4 0x08 + +/************************************************/ +/* Programmable Interrupt Controller*/ +/************************************************/ +#define PIC1 0x20 // first 8259 base port address +#define PIC2 0xA0 // second 8259 base port address +#define INT_OCW1 1 // Operation Control Word 1: IRQ mask +#define EOI 0x20 // non-specific end-of-interrupt + +/************************************************/ +/* Device/Geometry controls */ +/************************************************/ +#define GEOMETRY_NONE 0x0 // No device +#define GEOMETRY_AUTO 0x1 // Geometry set automatically +#define GEOMETRY_USER 0x2 // User supplied geometry + +#define DEVICE_NONE 0x0 // No device present +#define DEVICE_INACTIVE 0x1 // device present but not registered active +#define DEVICE_ATAPI 0x2 // ATAPI device (CD_ROM, Tape, Etc...) +#define DEVICE_DASD_NONLBA 0x3 // Non LBA incompatible device +#define DEVICE_DASD_LBA 0x4 // LBA compatible device + +/************************************************/ +/* Setup Structure Definitions */ +/************************************************/ +typedef struct // device setup parameters + { + UCHAR geometryControl; // geometry control flags + UCHAR device; // device code + USHORT sectors; // number of sectors per track + USHORT heads; // number of heads + USHORT cylinders; // number of cylinders for this device + ULONG blocks; // number of blocks on device + USHORT spare1; + USHORT spare2; + } SETUP_DEVICE, *PSETUP_DEVICE; + +typedef struct // master setup structure + { + USHORT startupDelay; + USHORT promptBIOS; + USHORT fastFormat; + USHORT spare2; + USHORT spare3; + USHORT spare4; + USHORT spare5; + USHORT spare6; + SETUP_DEVICE setupDevice[8]; + } SETUP, *PSETUP; + +#endif + |