summaryrefslogtreecommitdiff
path: root/drivers/scsi/pm8001
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pm8001')
-rw-r--r--drivers/scsi/pm8001/pm8001_defs.h4
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c4
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c5
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.c19
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.h12
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c111
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.h5
7 files changed, 120 insertions, 40 deletions
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index 74a4bb9af07b..f14ec6e042b9 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -49,13 +49,15 @@ enum chip_flavors {
chip_8019,
chip_8074,
chip_8076,
- chip_8077
+ chip_8077,
+ chip_8006,
};
enum phy_speed {
PHY_SPEED_15 = 0x01,
PHY_SPEED_30 = 0x02,
PHY_SPEED_60 = 0x04,
+ PHY_SPEED_120 = 0x08,
};
enum data_direction {
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 96dcc097a463..39306b1e704c 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3263,6 +3263,10 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
struct sas_phy *sas_phy = phy->sas_phy.phy;
switch (link_rate) {
+ case PHY_SPEED_120:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_12_0_GBPS;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_12_0_GBPS;
+ break;
case PHY_SPEED_60:
phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a132f2664d2f..5c0356fb6310 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -57,6 +57,7 @@ static const struct pm8001_chip_info pm8001_chips[] = {
[chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
[chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
[chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
};
static int pm8001_id;
@@ -1107,6 +1108,8 @@ err_out_enable:
*/
static struct pci_device_id pm8001_pci_table[] = {
{ PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
{ PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
/* Support for SPC/SPCv/SPCve controllers */
{ PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
@@ -1217,7 +1220,7 @@ MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
MODULE_DESCRIPTION(
- "PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
+ "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077 "
"SAS/SATA controller driver");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index b93f289b42b3..949198c01ced 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -790,6 +790,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
ccb->device = pm8001_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
pm8001_dev, flag, task_tag, ccb_tag);
@@ -975,19 +976,27 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
phy = sas_get_local_phy(dev);
if (dev_is_sata(dev)) {
- DECLARE_COMPLETION_ONSTACK(completion_setstate);
if (scsi_is_sas_phy_local(phy)) {
rc = 0;
goto out;
}
rc = sas_phy_reset(phy, 1);
+ if (rc) {
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("phy reset failed for device %x\n"
+ "with rc %d\n", pm8001_dev->device_id, rc));
+ rc = TMF_RESP_FUNC_FAILED;
+ goto out;
+ }
msleep(2000);
rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
- pm8001_dev->setds_completion = &completion_setstate;
- rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
- pm8001_dev, 0x01);
- wait_for_completion(&completion_setstate);
+ if (rc) {
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("task abort failed %x\n"
+ "with rc %d\n", pm8001_dev->device_id, rc));
+ rc = TMF_RESP_FUNC_FAILED;
+ }
} else {
rc = sas_phy_reset(phy, 1);
msleep(2000);
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 8dd8b7840f04..e2e97db38ae8 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -58,7 +58,7 @@
#include "pm8001_defs.h"
#define DRV_NAME "pm80xx"
-#define DRV_VERSION "0.1.37"
+#define DRV_VERSION "0.1.38"
#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
#define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
@@ -241,7 +241,7 @@ struct pm8001_chip_info {
struct pm8001_port {
struct asd_sas_port sas_port;
u8 port_attached;
- u8 wide_port_phymap;
+ u16 wide_port_phymap;
u8 port_state;
struct list_head list;
};
@@ -569,6 +569,14 @@ struct pm8001_fw_image_header {
#define NCQ_READ_LOG_FLAG 0x80000000
#define NCQ_ABORT_ALL_FLAG 0x40000000
#define NCQ_2ND_RLE_FLAG 0x20000000
+
+/* Device states */
+#define DS_OPERATIONAL 0x01
+#define DS_PORT_IN_RESET 0x02
+#define DS_IN_RECOVERY 0x03
+#define DS_IN_ERROR 0x04
+#define DS_NON_OPERATIONAL 0x07
+
/**
* brief param structure for firmware flash update.
*/
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 05cce463ab01..0e1628f2018e 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -309,6 +309,9 @@ static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET);
pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset =
pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET);
+ /* read port recover and reset timeout */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer =
+ pm8001_mr32(address, MAIN_PORT_RECOVERY_TIMER);
}
/**
@@ -585,6 +588,12 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay);
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &= 0xffff0000;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
+ PORT_RECOVERY_TIMEOUT;
+ pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
}
/**
@@ -843,6 +852,7 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
int rc;
u32 tag;
u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+ u32 page_code;
memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
rc = pm8001_tag_alloc(pm8001_ha, &tag);
@@ -851,8 +861,14 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
circularQ = &pm8001_ha->inbnd_q_tbl[0];
payload.tag = cpu_to_le32(tag);
+
+ if (IS_SPCV_12G(pm8001_ha->pdev))
+ page_code = THERMAL_PAGE_CODE_7H;
+ else
+ page_code = THERMAL_PAGE_CODE_8H;
+
payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
- (THERMAL_ENABLE << 8) | THERMAL_OP_CODE;
+ (THERMAL_ENABLE << 8) | page_code;
payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
@@ -1593,6 +1609,13 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
+ case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
@@ -2829,6 +2852,32 @@ static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
u32 phyId, u32 phy_op);
+static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct hw_event_resp *pPayload = (struct hw_event_resp *)(piomb + 4);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 phy_id = (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 deviceType = pPayload->sas_identify.dev_type;
+ u8 link_rate = (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+
+ if (deviceType == SAS_END_DEVICE) {
+ pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ }
+
+ port->wide_port_phymap |= (1U << phy_id);
+ pm8001_get_lrate_mode(phy, link_rate);
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ phy->phy_attached = 1;
+}
+
/**
* hw_event_sas_phy_up -FW tells me a SAS phy up event.
* @pm8001_ha: our hba card information
@@ -2856,6 +2905,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
unsigned long flags;
u8 deviceType = pPayload->sas_identify.dev_type;
port->port_state = portstate;
+ port->wide_port_phymap |= (1U << phy_id);
phy->phy_state = PHY_STATE_LINK_UP_SPCV;
PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
"portid:%d; phyid:%d; linkrate:%d; "
@@ -2981,7 +3031,6 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
struct pm8001_port *port = &pm8001_ha->port[port_id];
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
port->port_state = portstate;
- phy->phy_type = 0;
phy->identify.device_type = 0;
phy->phy_attached = 0;
memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
@@ -2993,9 +3042,13 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk(" PortInvalid portID %d\n", port_id));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
- port->port_attached = 0;
- pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
- port_id, phy_id, 0, 0);
+ if (phy->phy_type & PORT_TYPE_SATA) {
+ phy->phy_type = 0;
+ port->port_attached = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ }
+ sas_phy_disconnected(&phy->sas_phy);
break;
case PORT_IN_RESET:
PM8001_MSG_DBG(pm8001_ha,
@@ -3003,22 +3056,26 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
break;
case PORT_NOT_ESTABLISHED:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+ pm8001_printk(" Phy Down and PORT_NOT_ESTABLISHED\n"));
port->port_attached = 0;
break;
case PORT_LOSTCOMM:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+ pm8001_printk(" Phy Down and PORT_LOSTCOMM\n"));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
- port->port_attached = 0;
- pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
- port_id, phy_id, 0, 0);
+ if (phy->phy_type & PORT_TYPE_SATA) {
+ port->port_attached = 0;
+ phy->phy_type = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ }
+ sas_phy_disconnected(&phy->sas_phy);
break;
default:
port->port_attached = 0;
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" phy Down and(default) = 0x%x\n",
+ pm8001_printk(" Phy Down and(default) = 0x%x\n",
portstate));
break;
@@ -3084,7 +3141,7 @@ static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
*/
static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
- unsigned long flags;
+ unsigned long flags, i;
struct hw_event_resp *pPayload =
(struct hw_event_resp *)(piomb + 4);
u32 lr_status_evt_portid =
@@ -3097,9 +3154,9 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
(u16)((lr_status_evt_portid & 0x00FFFF00) >> 8);
u8 status =
(u8)((lr_status_evt_portid & 0x0F000000) >> 24);
-
struct sas_ha_struct *sas_ha = pm8001_ha->sas;
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n",
@@ -3125,7 +3182,9 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
case HW_EVENT_PHY_DOWN:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_PHY_DOWN\n"));
- sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ if (phy->phy_type & PORT_TYPE_SATA)
+ sas_ha->notify_phy_event(&phy->sas_phy,
+ PHYE_LOSS_OF_SIGNAL);
phy->phy_attached = 0;
phy->phy_state = 0;
hw_event_phy_down(pm8001_ha, piomb);
@@ -3169,9 +3228,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
- sas_phy_disconnected(sas_phy);
- phy->phy_attached = 0;
- sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
PM8001_MSG_DBG(pm8001_ha,
@@ -3179,9 +3235,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_DISPARITY_ERROR,
port_id, phy_id, 0, 0);
- sas_phy_disconnected(sas_phy);
- phy->phy_attached = 0;
- sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_CODE_VIOLATION:
PM8001_MSG_DBG(pm8001_ha,
@@ -3189,9 +3242,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_CODE_VIOLATION,
port_id, phy_id, 0, 0);
- sas_phy_disconnected(sas_phy);
- phy->phy_attached = 0;
- sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
@@ -3199,9 +3249,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
port_id, phy_id, 0, 0);
- sas_phy_disconnected(sas_phy);
- phy->phy_attached = 0;
- sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_MALFUNCTION:
PM8001_MSG_DBG(pm8001_ha,
@@ -3257,13 +3304,19 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_PORT_RECOVERY_TIMER_TMO,
port_id, phy_id, 0, 0);
- sas_phy_disconnected(sas_phy);
- phy->phy_attached = 0;
- sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ if (port->wide_port_phymap & (1 << i)) {
+ phy = &pm8001_ha->phy[i];
+ sas_ha->notify_phy_event(&phy->sas_phy,
+ PHYE_LOSS_OF_SIGNAL);
+ port->wide_port_phymap &= ~(1 << i);
+ }
+ }
break;
case HW_EVENT_PORT_RECOVER:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+ hw_event_port_recover(pm8001_ha, piomb);
break;
case HW_EVENT_PORT_RESET_COMPLETE:
PM8001_MSG_DBG(pm8001_ha,
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 9970a385795d..7a443bad6163 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -177,7 +177,8 @@
/* Thermal related */
#define THERMAL_ENABLE 0x1
#define THERMAL_LOG_ENABLE 0x1
-#define THERMAL_OP_CODE 0x6
+#define THERMAL_PAGE_CODE_7H 0x6
+#define THERMAL_PAGE_CODE_8H 0x7
#define LTEMPHIL 70
#define RTEMPHIL 100
@@ -1174,7 +1175,7 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
#define IO_XFER_ERROR_INTERNAL_CRC_ERROR 0x54
#define MPI_IO_RQE_BUSY_FULL 0x55
#define IO_XFER_ERR_EOB_DATA_OVERRUN 0x56
-#define IO_XFR_ERROR_INVALID_SSP_RSP_FRAME 0x57
+#define IO_XFER_ERROR_INVALID_SSP_RSP_FRAME 0x57
#define IO_OPEN_CNX_ERROR_OPEN_PREEMPTED 0x58
#define MPI_ERR_IO_RESOURCE_UNAVAILABLE 0x1004
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 08:44:42 +0300