diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_sli.c')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 237 |
1 files changed, 102 insertions, 135 deletions
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index fb8905f893f5..0d1e187b005d 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1677,6 +1677,8 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_RESUME_RPI: case MBX_READ_EVENT_LOG_STATUS: case MBX_READ_EVENT_LOG: + case MBX_SECURITY_MGMT: + case MBX_AUTH_PORT: ret = mbxCommand; break; default: @@ -1730,10 +1732,11 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { + struct lpfc_vport *vport = pmb->vport; struct lpfc_dmabuf *mp; + struct lpfc_nodelist *ndlp; uint16_t rpi, vpi; int rc; - struct lpfc_vport *vport = pmb->vport; mp = (struct lpfc_dmabuf *) (pmb->context1); @@ -1774,6 +1777,19 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } + if (pmb->u.mb.mbxCommand == MBX_REG_LOGIN64) { + ndlp = (struct lpfc_nodelist *)pmb->context2; + lpfc_nlp_put(ndlp); + pmb->context2 = NULL; + } + + /* Check security permission status on INIT_LINK mailbox command */ + if ((pmb->u.mb.mbxCommand == MBX_INIT_LINK) && + (pmb->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION)) + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "2860 SLI authentication is required " + "for INIT_LINK but has not done yet\n"); + if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG) lpfc_sli4_mbox_cmd_free(phba, pmb); else @@ -3651,11 +3667,15 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) i = 0; while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) { - /* Check every 100ms for 5 retries, then every 500ms for 5, then - * every 2.5 sec for 5, then reset board and every 2.5 sec for - * 4. + /* Check every 10ms for 10 retries, then every 100ms for 90 + * retries, then every 1 sec for 50 retires for a total of + * ~60 seconds before reset the board again and check every + * 1 sec for 50 retries. The up to 60 seconds before the + * board ready is required by the Falcon FIPS zeroization + * complete, and any reset the board in between shall cause + * restart of zeroization, further delay the board ready. */ - if (i++ >= 20) { + if (i++ >= 200) { /* Adapter failed to init, timeout, status reg <status> */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -3683,16 +3703,15 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) return -EIO; } - if (i <= 5) { + if (i <= 10) msleep(10); - } else if (i <= 10) { - msleep(500); - } else { - msleep(2500); - } + else if (i <= 100) + msleep(100); + else + msleep(1000); - if (i == 15) { - /* Do post */ + if (i == 150) { + /* Do post */ phba->pport->port_state = LPFC_VPORT_UNKNOWN; lpfc_sli_brdrestart(phba); } @@ -4186,7 +4205,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, * * Return codes * 0 - successful - * ENOMEM - could not allocated memory. + * -ENOMEM - could not allocated memory. **/ static int lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, @@ -5943,6 +5962,8 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, uint8_t command_type = ELS_COMMAND_NON_FIP; uint8_t cmnd; uint16_t xritag; + uint16_t abrt_iotag; + struct lpfc_iocbq *abrtiocbq; struct ulp_bde64 *bpl = NULL; uint32_t els_id = ELS_ID_DEFAULT; int numBdes, i; @@ -6155,9 +6176,17 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, case CMD_ABORT_XRI_CX: /* words 0-2 memcpy should be 0 rserved */ /* port will send abts */ - if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN) + abrt_iotag = iocbq->iocb.un.acxri.abortContextTag; + if (abrt_iotag != 0 && abrt_iotag <= phba->sli.last_iotag) { + abrtiocbq = phba->sli.iocbq_lookup[abrt_iotag]; + fip = abrtiocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK; + } else + fip = 0; + + if ((iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN) || fip) /* - * The link is down so the fw does not need to send abts + * The link is down, or the command was ELS_FIP + * so the fw does not need to send abts * on the wire. */ bf_set(abort_cmd_ia, &wqe->abort_cmd, 1); @@ -6901,37 +6930,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } /** - * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA - * @phba: Pointer to HBA context object. - * - * This function cleans up all queues, iocb, buffers, mailbox commands while - * shutting down the SLI4 HBA FCoE function. This function is called with no - * lock held and always returns 1. - * - * This function does the following to cleanup driver FCoE function resources: - * - Free discovery resources for each virtual port - * - Cleanup any pending fabric iocbs - * - Iterate through the iocb txq and free each entry in the list. - * - Free up any buffer posted to the HBA. - * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc. - * - Free mailbox commands in the mailbox queue. - **/ -int -lpfc_sli4_hba_down(struct lpfc_hba *phba) -{ - /* Stop the SLI4 device port */ - lpfc_stop_port(phba); - - /* Tear down the queues in the HBA */ - lpfc_sli4_queue_unset(phba); - - /* unregister default FCFI from the HBA */ - lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi); - - return 1; -} - -/** * lpfc_sli_pcimem_bcopy - SLI memory copy function * @srcp: Source memory pointer. * @destp: Destination memory pointer. @@ -7888,7 +7886,7 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba) /* Check if there is a deferred error condition is active */ if ((HS_FFER1 & phba->work_hs) && ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | - HS_FFER6 | HS_FFER7) & phba->work_hs)) { + HS_FFER6 | HS_FFER7 | HS_FFER8) & phba->work_hs)) { phba->hba_flag |= DEFER_ERATT; /* Clear all interrupt enable conditions */ writel(0, phba->HCregaddr); @@ -8204,7 +8202,8 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id) */ if ((HS_FFER1 & phba->work_hs) && ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | - HS_FFER6 | HS_FFER7) & phba->work_hs)) { + HS_FFER6 | HS_FFER7 | HS_FFER8) & + phba->work_hs)) { phba->hba_flag |= DEFER_ERATT; /* Clear all interrupt enable conditions */ writel(0, phba->HCregaddr); @@ -8476,7 +8475,7 @@ lpfc_sli_intr_handler(int irq, void *dev_id) * If there is deferred error attention, do not check for any interrupt. */ if (unlikely(phba->hba_flag & DEFER_ERATT)) { - spin_unlock_irq(&phba->hbalock); + spin_unlock(&phba->hbalock); return IRQ_NONE; } @@ -9724,8 +9723,8 @@ out_fail: * command to finish before continuing. * * On success this function will return a zero. If unable to allocate enough - * memory this function will return ENOMEM. If the queue create mailbox command - * fails this function will return ENXIO. + * memory this function will return -ENOMEM. If the queue create mailbox command + * fails this function will return -ENXIO. **/ uint32_t lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax) @@ -9840,8 +9839,8 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax) * command to finish before continuing. * * On success this function will return a zero. If unable to allocate enough - * memory this function will return ENOMEM. If the queue create mailbox command - * fails this function will return ENXIO. + * memory this function will return -ENOMEM. If the queue create mailbox command + * fails this function will return -ENXIO. **/ uint32_t lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq, @@ -10011,8 +10010,8 @@ lpfc_mq_create_fb_init(struct lpfc_hba *phba, struct lpfc_queue *mq, * command to finish before continuing. * * On success this function will return a zero. If unable to allocate enough - * memory this function will return ENOMEM. If the queue create mailbox command - * fails this function will return ENXIO. + * memory this function will return -ENOMEM. If the queue create mailbox command + * fails this function will return -ENXIO. **/ int32_t lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, @@ -10146,8 +10145,8 @@ out: * command to finish before continuing. * * On success this function will return a zero. If unable to allocate enough - * memory this function will return ENOMEM. If the queue create mailbox command - * fails this function will return ENXIO. + * memory this function will return -ENOMEM. If the queue create mailbox command + * fails this function will return -ENXIO. **/ uint32_t lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq, @@ -10234,8 +10233,8 @@ out: * mailbox command to finish before continuing. * * On success this function will return a zero. If unable to allocate enough - * memory this function will return ENOMEM. If the queue create mailbox command - * fails this function will return ENXIO. + * memory this function will return -ENOMEM. If the queue create mailbox command + * fails this function will return -ENXIO. **/ uint32_t lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq, @@ -10403,7 +10402,7 @@ out: * The @eq struct is used to get the queue ID of the queue to destroy. * * On success this function will return a zero. If the queue destroy mailbox - * command fails this function will return ENXIO. + * command fails this function will return -ENXIO. **/ uint32_t lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq) @@ -10458,7 +10457,7 @@ lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq) * The @cq struct is used to get the queue ID of the queue to destroy. * * On success this function will return a zero. If the queue destroy mailbox - * command fails this function will return ENXIO. + * command fails this function will return -ENXIO. **/ uint32_t lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq) @@ -10511,7 +10510,7 @@ lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq) * The @mq struct is used to get the queue ID of the queue to destroy. * * On success this function will return a zero. If the queue destroy mailbox - * command fails this function will return ENXIO. + * command fails this function will return -ENXIO. **/ uint32_t lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq) @@ -10564,7 +10563,7 @@ lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq) * The @wq struct is used to get the queue ID of the queue to destroy. * * On success this function will return a zero. If the queue destroy mailbox - * command fails this function will return ENXIO. + * command fails this function will return -ENXIO. **/ uint32_t lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq) @@ -10616,7 +10615,7 @@ lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq) * The @rq struct is used to get the queue ID of the queue to destroy. * * On success this function will return a zero. If the queue destroy mailbox - * command fails this function will return ENXIO. + * command fails this function will return -ENXIO. **/ uint32_t lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq, @@ -10758,51 +10757,6 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, } return 0; } -/** - * lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA - * @phba: The virtual port for which this call being executed. - * - * This routine will remove all of the sgl pages registered with the hba. - * - * Return codes: - * 0 - Success - * -ENXIO, -ENOMEM - Failure - **/ -int -lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba) -{ - LPFC_MBOXQ_t *mbox; - int rc; - uint32_t shdr_status, shdr_add_status; - union lpfc_sli4_cfg_shdr *shdr; - - mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) - return -ENOMEM; - - lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE, - LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0, - LPFC_SLI4_MBX_EMBED); - if (!phba->sli4_hba.intr_enable) - rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); - else - rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - /* The IOCTL status is embedded in the mailbox subheader. */ - shdr = (union lpfc_sli4_cfg_shdr *) - &mbox->u.mqe.un.sli4_config.header.cfg_shdr; - shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); - shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); - if (rc != MBX_TIMEOUT) - mempool_free(mbox, phba->mbox_mem_pool); - if (shdr_status || shdr_add_status || rc) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2512 REMOVE_ALL_SGL_PAGES mailbox failed with " - "status x%x add_status x%x, mbx status x%x\n", - shdr_status, shdr_add_status, rc); - rc = -ENXIO; - } - return rc; -} /** * lpfc_sli4_next_xritag - Get an xritag for the io @@ -11819,7 +11773,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba, * * Return codes * 0 - successful - * EIO - The mailbox failed to complete successfully. + * -EIO - The mailbox failed to complete successfully. * When this error occurs, the driver is not guaranteed * to have any rpi regions posted to the device and * must either attempt to repost the regions or take a @@ -11857,8 +11811,8 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) * * Return codes * 0 - successful - * ENOMEM - No available memory - * EIO - The mailbox failed to complete successfully. + * -ENOMEM - No available memory + * -EIO - The mailbox failed to complete successfully. **/ int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) @@ -12805,8 +12759,11 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport) LPFC_MBOXQ_t *mb, *nextmb; struct lpfc_dmabuf *mp; struct lpfc_nodelist *ndlp; + struct lpfc_nodelist *act_mbx_ndlp = NULL; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + LIST_HEAD(mbox_cmd_list); + /* Clean up internally queued mailbox commands with the vport */ spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { if (mb->vport != vport) @@ -12816,6 +12773,28 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport) (mb->u.mb.mbxCommand != MBX_REG_VPI)) continue; + list_del(&mb->list); + list_add_tail(&mb->list, &mbox_cmd_list); + } + /* Clean up active mailbox command with the vport */ + mb = phba->sli.mbox_active; + if (mb && (mb->vport == vport)) { + if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) || + (mb->u.mb.mbxCommand == MBX_REG_VPI)) + mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) { + act_mbx_ndlp = (struct lpfc_nodelist *)mb->context2; + /* Put reference count for delayed processing */ + act_mbx_ndlp = lpfc_nlp_get(act_mbx_ndlp); + /* Unregister the RPI when mailbox complete */ + mb->mbox_flag |= LPFC_MBX_IMED_UNREG; + } + } + spin_unlock_irq(&phba->hbalock); + + /* Release the cleaned-up mailbox commands */ + while (!list_empty(&mbox_cmd_list)) { + list_remove_head(&mbox_cmd_list, mb, LPFC_MBOXQ_t, list); if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) { if (phba->sli_rev == LPFC_SLI_REV4) __lpfc_sli4_free_rpi(phba, @@ -12826,36 +12805,24 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport) kfree(mp); } ndlp = (struct lpfc_nodelist *) mb->context2; + mb->context2 = NULL; if (ndlp) { - spin_lock_irq(shost->host_lock); + spin_lock(shost->host_lock); ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; - spin_unlock_irq(shost->host_lock); + spin_unlock(shost->host_lock); lpfc_nlp_put(ndlp); - mb->context2 = NULL; } } - list_del(&mb->list); mempool_free(mb, phba->mbox_mem_pool); } - mb = phba->sli.mbox_active; - if (mb && (mb->vport == vport)) { - if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) || - (mb->u.mb.mbxCommand == MBX_REG_VPI)) - mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) { - ndlp = (struct lpfc_nodelist *) mb->context2; - if (ndlp) { - spin_lock_irq(shost->host_lock); - ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; - spin_unlock_irq(shost->host_lock); - lpfc_nlp_put(ndlp); - mb->context2 = NULL; - } - /* Unregister the RPI when mailbox complete */ - mb->mbox_flag |= LPFC_MBX_IMED_UNREG; - } + + /* Release the ndlp with the cleaned-up active mailbox command */ + if (act_mbx_ndlp) { + spin_lock(shost->host_lock); + act_mbx_ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; + spin_unlock(shost->host_lock); + lpfc_nlp_put(act_mbx_ndlp); } - spin_unlock_irq(&phba->hbalock); } /** |