1 files changed, 20 insertions, 14 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f08129c67a2e..ead8e91e8625 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8550,9 +8550,12 @@ lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
 	}
 	/* FW supports persistent topology - override module parameter value */
 	phba->hba_flag |= HBA_PERSISTENT_TOPO;
-	switch (phba->pcidev->device) {
-	case PCI_DEVICE_ID_LANCER_G7_FC:
-	case PCI_DEVICE_ID_LANCER_G6_FC:
+
+	/* if ASIC_GEN_NUM >= 0xC) */
+	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_IF_TYPE_6) ||
+	    (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_FAMILY_G6)) {
 		if (!tf) {
 			phba->cfg_topology = ((pt == LINK_FLAGS_LOOP)
 					? FLAGS_TOPOLOGY_MODE_LOOP
@@ -8560,8 +8563,7 @@ lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
 		} else {
 			phba->hba_flag &= ~HBA_PERSISTENT_TOPO;
 		}
-		break;
-	default:	/* G5 */
+	} else { /* G5 */
 		if (tf) {
 			/* If topology failover set - pt is '0' or '1' */
 			phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP :
@@ -8571,7 +8573,6 @@ lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
 					? FLAGS_TOPOLOGY_MODE_PT_PT
 					: FLAGS_TOPOLOGY_MODE_LOOP);
 		}
-		break;
 	}
 	if (phba->hba_flag & HBA_PERSISTENT_TOPO) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
@@ -12991,7 +12992,9 @@ lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
 	const struct firmware *fw)
 {
 	int rc;
+	u8 sli_family;
 
+	sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
 	/* Three cases:  (1) FW was not supported on the detected adapter.
 	 * (2) FW update has been locked out administratively.
 	 * (3) Some other error during FW update.
@@ -12999,10 +13002,12 @@ lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
 	 * for admin diagnosis.
 	 */
 	if (offset == ADD_STATUS_FW_NOT_SUPPORTED ||
-	    (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
+	    (sli_family == LPFC_SLI_INTF_FAMILY_G6 &&
 	     magic_number != MAGIC_NUMBER_G6) ||
-	    (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC &&
-	     magic_number != MAGIC_NUMBER_G7)) {
+	    (sli_family == LPFC_SLI_INTF_FAMILY_G7 &&
+	     magic_number != MAGIC_NUMBER_G7) ||
+	    (sli_family == LPFC_SLI_INTF_FAMILY_G7P &&
+	     magic_number != MAGIC_NUMBER_G7P)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 				"3030 This firmware version is not supported on"
 				" this HBA model. Device:%x Magic:%x Type:%x "
@@ -14053,17 +14058,18 @@ lpfc_sli4_oas_verify(struct lpfc_hba *phba)
 void
 lpfc_sli4_ras_init(struct lpfc_hba *phba)
 {
-	switch (phba->pcidev->device) {
-	case PCI_DEVICE_ID_LANCER_G6_FC:
-	case PCI_DEVICE_ID_LANCER_G7_FC:
+	/* if ASIC_GEN_NUM >= 0xC) */
+	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_IF_TYPE_6) ||
+	    (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_FAMILY_G6)) {
 		phba->ras_fwlog.ras_hwsupport = true;
 		if (phba->cfg_ras_fwlog_func == PCI_FUNC(phba->pcidev->devfn) &&
 		    phba->cfg_ras_fwlog_buffsize)
 			phba->ras_fwlog.ras_enabled = true;
 		else
 			phba->ras_fwlog.ras_enabled = false;
-		break;
-	default:
+	} else {
 		phba->ras_fwlog.ras_hwsupport = false;
 	}
 }