diff options
Diffstat (limited to 'drivers/scsi/g_NCR5380.c')
| -rw-r--r-- | drivers/scsi/g_NCR5380.c | 224 |
1 files changed, 12 insertions, 212 deletions
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index b331272e93bc..f35792f7051c 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -18,20 +18,6 @@ * * Added ISAPNP support for DTC436 adapters, * Thomas Sailer, sailer@ife.ee.ethz.ch - * - * ALPHA RELEASE 1. - * - * For more information, please consult - * - * NCR 5380 Family - * SCSI Protocol Controller - * Databook - * - * NCR Microelectronics - * 1635 Aeroplaza Drive - * Colorado Springs, CO 80916 - * 1+ (719) 578-3400 - * 1+ (800) 334-5454 */ /* @@ -40,14 +26,6 @@ */ /* - * Options : - * - * PARITY - enable parity checking. Not supported. - * - * SCSI2 - enable support for SCSI-II tagged queueing. Untested. - * - * USLEEP - enable support for devices that don't disconnect. Untested. - * * The card is detected and initialized in one of several ways : * 1. With command line overrides - NCR5380=port,irq may be * used on the LILO command line to override the defaults. @@ -79,27 +57,21 @@ */ /* settings for DTC3181E card with only Mustek scanner attached */ -#define USLEEP #define USLEEP_POLL 1 #define USLEEP_SLEEP 20 #define USLEEP_WAITLONG 500 #define AUTOPROBE_IRQ -#define AUTOSENSE - #ifdef CONFIG_SCSI_GENERIC_NCR53C400 #define NCR53C400_PSEUDO_DMA 1 #define PSEUDO_DMA #define NCR53C400 -#define NCR5380_STATS -#undef NCR5380_STAT_LIMIT #endif #include <asm/io.h> #include <linux/signal.h> #include <linux/blkdev.h> -#include "scsi.h" #include <scsi/scsi_host.h> #include "g_NCR5380.h" #include "NCR5380.h" @@ -277,7 +249,7 @@ static int __init do_DTC3181E_setup(char *str) * Locks: none */ -int __init generic_NCR5380_detect(struct scsi_host_template * tpnt) +static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) { static int current_override = 0; int count; @@ -335,7 +307,7 @@ int __init generic_NCR5380_detect(struct scsi_host_template * tpnt) if (pnp_irq_valid(dev, 0)) overrides[count].irq = pnp_irq(dev, 0); else - overrides[count].irq = SCSI_IRQ_NONE; + overrides[count].irq = NO_IRQ; if (pnp_dma_valid(dev, 0)) overrides[count].dma = pnp_dma(dev, 0); else @@ -455,27 +427,22 @@ int __init generic_NCR5380_detect(struct scsi_host_template * tpnt) else instance->irq = NCR5380_probe_irq(instance, 0xffff); - if (instance->irq != SCSI_IRQ_NONE) + /* Compatibility with documented NCR5380 kernel parameters */ + if (instance->irq == 255) + instance->irq = NO_IRQ; + + if (instance->irq != NO_IRQ) if (request_irq(instance->irq, generic_NCR5380_intr, 0, "NCR5380", instance)) { printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); - instance->irq = SCSI_IRQ_NONE; + instance->irq = NO_IRQ; } - if (instance->irq == SCSI_IRQ_NONE) { + if (instance->irq == NO_IRQ) { printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); } - printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name); - if (instance->irq == SCSI_IRQ_NONE) - printk(" interrupts disabled"); - else - printk(" irq %d", instance->irq); - printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE); - NCR5380_print_options(instance); - printk("\n"); - ++current_override; ++count; } @@ -483,19 +450,6 @@ int __init generic_NCR5380_detect(struct scsi_host_template * tpnt) } /** - * generic_NCR5380_info - reporting string - * @host: NCR5380 to report on - * - * Report driver information for the NCR5380 - */ - -const char *generic_NCR5380_info(struct Scsi_Host *host) -{ - static const char string[] = "Generic NCR5380/53C400 Driver"; - return string; -} - -/** * generic_NCR5380_release_resources - free resources * @instance: host adapter to clean up * @@ -504,12 +458,12 @@ const char *generic_NCR5380_info(struct Scsi_Host *host) * Locks: none */ -int generic_NCR5380_release_resources(struct Scsi_Host *instance) +static int generic_NCR5380_release_resources(struct Scsi_Host *instance) { NCR5380_local_declare(); NCR5380_setup(instance); - if (instance->irq != SCSI_IRQ_NONE) + if (instance->irq != NO_IRQ) free_irq(instance->irq, instance); NCR5380_exit(instance); @@ -741,163 +695,9 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, #include "NCR5380.c" -#define PRINTP(x) seq_printf(m, x) -#define ANDP , - -static void sprint_opcode(struct seq_file *m, int opcode) -{ - PRINTP("0x%02x " ANDP opcode); -} - -static void sprint_command(struct seq_file *m, unsigned char *command) -{ - int i, s; - sprint_opcode(m, command[0]); - for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) - PRINTP("%02x " ANDP command[i]); - PRINTP("\n"); -} - -/** - * sprintf_Scsi_Cmnd - print a scsi command - * @m: seq_fil to print into - * @cmd: SCSI command block - * - * Print out the target and command data in hex - */ - -static void sprint_Scsi_Cmnd(struct seq_file *m, Scsi_Cmnd * cmd) -{ - PRINTP("host number %d destination target %d, lun %llu\n" ANDP cmd->device->host->host_no ANDP cmd->device->id ANDP cmd->device->lun); - PRINTP(" command = "); - sprint_command(m, cmd->cmnd); -} - -/** - * generic_NCR5380_proc_info - /proc for NCR5380 driver - * @buffer: buffer to print into - * @start: start position - * @offset: offset into buffer - * @len: length - * @hostno: instance to affect - * @inout: read/write - * - * Provide the procfs information for the 5380 controller. We fill - * this with useful debugging information including the commands - * being executed, disconnected command queue and the statistical - * data - * - * Locks: global cli/lock for queue walk - */ - -static int generic_NCR5380_show_info(struct seq_file *m, struct Scsi_Host *scsi_ptr) -{ - NCR5380_local_declare(); - unsigned long flags; - unsigned char status; - int i; - Scsi_Cmnd *ptr; - struct NCR5380_hostdata *hostdata; -#ifdef NCR5380_STATS - struct scsi_device *dev; -#endif - - NCR5380_setup(scsi_ptr); - hostdata = (struct NCR5380_hostdata *) scsi_ptr->hostdata; - - spin_lock_irqsave(scsi_ptr->host_lock, flags); - PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name); - PRINTP("Generic NCR5380 driver version %d\n" ANDP GENERIC_NCR5380_PUBLIC_RELEASE); - PRINTP("NCR5380 core version %d\n" ANDP NCR5380_PUBLIC_RELEASE); -#ifdef NCR53C400 - PRINTP("NCR53C400 extension version %d\n" ANDP NCR53C400_PUBLIC_RELEASE); - PRINTP("NCR53C400 card%s detected\n" ANDP(((struct NCR5380_hostdata *) scsi_ptr->hostdata)->flags & FLAG_NCR53C400) ? "" : " not"); -# if NCR53C400_PSEUDO_DMA - PRINTP("NCR53C400 pseudo DMA used\n"); -# endif -#else - PRINTP("NO NCR53C400 driver extensions\n"); -#endif - PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name); - if (scsi_ptr->irq == SCSI_IRQ_NONE) - PRINTP("no interrupt\n"); - else - PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq); - -#ifdef NCR5380_STATS - if (hostdata->connected || hostdata->issue_queue || hostdata->disconnected_queue) - PRINTP("There are commands pending, transfer rates may be crud\n"); - if (hostdata->pendingr) - PRINTP(" %d pending reads" ANDP hostdata->pendingr); - if (hostdata->pendingw) - PRINTP(" %d pending writes" ANDP hostdata->pendingw); - if (hostdata->pendingr || hostdata->pendingw) - PRINTP("\n"); - shost_for_each_device(dev, scsi_ptr) { - unsigned long br = hostdata->bytes_read[dev->id]; - unsigned long bw = hostdata->bytes_write[dev->id]; - long tr = hostdata->time_read[dev->id] / HZ; - long tw = hostdata->time_write[dev->id] / HZ; - - PRINTP(" T:%d %s " ANDP dev->id ANDP scsi_device_type(dev->type)); - for (i = 0; i < 8; i++) - if (dev->vendor[i] >= 0x20) - seq_putc(m, dev->vendor[i]); - seq_putc(m, ' '); - for (i = 0; i < 16; i++) - if (dev->model[i] >= 0x20) - seq_putc(m, dev->model[i]); - seq_putc(m, ' '); - for (i = 0; i < 4; i++) - if (dev->rev[i] >= 0x20) - seq_putc(m, dev->rev[i]); - seq_putc(m, ' '); - - PRINTP("\n%10ld kb read in %5ld secs" ANDP br / 1024 ANDP tr); - if (tr) - PRINTP(" @ %5ld bps" ANDP br / tr); - - PRINTP("\n%10ld kb written in %5ld secs" ANDP bw / 1024 ANDP tw); - if (tw) - PRINTP(" @ %5ld bps" ANDP bw / tw); - PRINTP("\n"); - } -#endif - - status = NCR5380_read(STATUS_REG); - if (!(status & SR_REQ)) - PRINTP("REQ not asserted, phase unknown.\n"); - else { - for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i); - PRINTP("Phase %s\n" ANDP phases[i].name); - } - - if (!hostdata->connected) { - PRINTP("No currently connected command\n"); - } else { - sprint_Scsi_Cmnd(m, (Scsi_Cmnd *) hostdata->connected); - } - - PRINTP("issue_queue\n"); - - for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble) - sprint_Scsi_Cmnd(m, ptr); - - PRINTP("disconnected_queue\n"); - - for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble) - sprint_Scsi_Cmnd(m, ptr); - - spin_unlock_irqrestore(scsi_ptr->host_lock, flags); - return 0; -} - -#undef PRINTP -#undef ANDP - static struct scsi_host_template driver_template = { .show_info = generic_NCR5380_show_info, - .name = "Generic NCR5380/NCR53C400 Scsi Driver", + .name = "Generic NCR5380/NCR53C400 SCSI", .detect = generic_NCR5380_detect, .release = generic_NCR5380_release_resources, .info = generic_NCR5380_info, |