diff options
Diffstat (limited to 'drivers/scsi/aacraid')
-rw-r--r-- | drivers/scsi/aacraid/aachba.c | 8 | ||||
-rw-r--r-- | drivers/scsi/aacraid/aacraid.h | 100 | ||||
-rw-r--r-- | drivers/scsi/aacraid/comminit.c | 239 | ||||
-rw-r--r-- | drivers/scsi/aacraid/commsup.c | 13 | ||||
-rw-r--r-- | drivers/scsi/aacraid/linit.c | 2 | ||||
-rw-r--r-- | drivers/scsi/aacraid/rkt.c | 2 | ||||
-rw-r--r-- | drivers/scsi/aacraid/rx.c | 4 | ||||
-rw-r--r-- | drivers/scsi/aacraid/sa.c | 4 | ||||
-rw-r--r-- | drivers/scsi/aacraid/src.c | 27 |
9 files changed, 261 insertions, 138 deletions
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 1ee7c654f7b8..2ad7aeacd092 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1144,7 +1144,9 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3 long ret; aac_fib_init(fib); - if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) { + if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 || + dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) && + !dev->sync_mode) { struct aac_raw_io2 *readcmd2; readcmd2 = (struct aac_raw_io2 *) fib_data(fib); memset(readcmd2, 0, sizeof(struct aac_raw_io2)); @@ -1270,7 +1272,9 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u long ret; aac_fib_init(fib); - if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) { + if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 || + dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) && + !dev->sync_mode) { struct aac_raw_io2 *writecmd2; writecmd2 = (struct aac_raw_io2 *) fib_data(fib); memset(writecmd2, 0, sizeof(struct aac_raw_io2)); diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 01b457b91159..f712d8d6c715 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -82,6 +82,11 @@ enum { #define AAC_DEBUG_INSTRUMENT_AIF_DELETE /* + * Interrupts + */ +#define AAC_MAX_HRRQ 64 + +/* * These macros convert from physical channels to virtual channels */ #define CONTAINER_CHANNEL (0) @@ -491,41 +496,64 @@ enum fib_xfer_state { #define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science #define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */ #define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */ +#define ADAPTER_INIT_STRUCT_REVISION_8 8 // Thor -struct aac_init +union aac_init { - __le32 InitStructRevision; - __le32 Sa_MSIXVectors; - __le32 fsrev; - __le32 CommHeaderAddress; - __le32 FastIoCommAreaAddress; - __le32 AdapterFibsPhysicalAddress; - __le32 AdapterFibsVirtualAddress; - __le32 AdapterFibsSize; - __le32 AdapterFibAlign; - __le32 printfbuf; - __le32 printfbufsiz; - __le32 HostPhysMemPages; /* number of 4k pages of host - physical memory */ - __le32 HostElapsedSeconds; /* number of seconds since 1970. */ - /* - * ADAPTER_INIT_STRUCT_REVISION_4 begins here - */ - __le32 InitFlags; /* flags for supported features */ + struct _r7 { + __le32 init_struct_revision; + __le32 no_of_msix_vectors; + __le32 fsrev; + __le32 comm_header_address; + __le32 fast_io_comm_area_address; + __le32 adapter_fibs_physical_address; + __le32 adapter_fibs_virtual_address; + __le32 adapter_fibs_size; + __le32 adapter_fib_align; + __le32 printfbuf; + __le32 printfbufsiz; + /* number of 4k pages of host phys. mem. */ + __le32 host_phys_mem_pages; + /* number of seconds since 1970. */ + __le32 host_elapsed_seconds; + /* ADAPTER_INIT_STRUCT_REVISION_4 begins here */ + __le32 init_flags; /* flags for supported features */ #define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001 #define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010 #define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020 #define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040 #define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080 #define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100 - __le32 MaxIoCommands; /* max outstanding commands */ - __le32 MaxIoSize; /* largest I/O command */ - __le32 MaxFibSize; /* largest FIB to adapter */ - /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */ - __le32 MaxNumAif; /* max number of aif */ - /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */ - __le32 HostRRQ_AddrLow; - __le32 HostRRQ_AddrHigh; /* Host RRQ (response queue) for SRC */ +#define INITFLAGS_DRIVER_SUPPORTS_HBA_MODE 0x00000400 + __le32 max_io_commands; /* max outstanding commands */ + __le32 max_io_size; /* largest I/O command */ + __le32 max_fib_size; /* largest FIB to adapter */ + /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */ + __le32 max_num_aif; /* max number of aif */ + /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */ + /* Host RRQ (response queue) for SRC */ + __le32 host_rrq_addr_low; + __le32 host_rrq_addr_high; + } r7; + struct _r8 { + /* ADAPTER_INIT_STRUCT_REVISION_8 */ + __le32 init_struct_revision; + __le32 rr_queue_count; + __le32 host_elapsed_seconds; /* number of secs since 1970. */ + __le32 init_flags; + __le32 max_io_size; /* largest I/O command */ + __le32 max_num_aif; /* max number of aif */ + __le32 reserved1; + __le32 reserved2; + struct _rrq { + __le32 host_addr_low; + __le32 host_addr_high; + __le16 msix_id; + __le16 element_count; + __le16 comp_thresh; + __le16 unused; + } rrq[1]; /* up to 64 RRQ addresses */ + } r8; }; enum aac_log_level { @@ -729,6 +757,7 @@ struct sa_registers { #define SA_INIT_NUM_MSIXVECTORS 1 +#define SA_MINIPORT_REVISION SA_INIT_NUM_MSIXVECTORS #define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) #define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) @@ -1106,6 +1135,12 @@ struct aac_bus_info_response { #define AAC_OPT_NEW_COMM_TYPE3 cpu_to_le32(1<<30) #define AAC_OPT_NEW_COMM_TYPE4 cpu_to_le32(1<<31) +#define AAC_COMM_PRODUCER 0 +#define AAC_COMM_MESSAGE 1 +#define AAC_COMM_MESSAGE_TYPE1 3 +#define AAC_COMM_MESSAGE_TYPE2 4 +#define AAC_COMM_MESSAGE_TYPE3 5 + /* MSIX context */ struct aac_msix_ctx { int vector_no; @@ -1159,8 +1194,11 @@ struct aac_dev resource_size_t base_size, dbg_size; /* Size of * mapped in region */ - - struct aac_init *init; /* Holds initialization info to communicate with adapter */ + /* + * Holds initialization info + * to communicate with adapter + */ + union aac_init *init; dma_addr_t init_pa; /* Holds physical address of the init struct */ u32 *host_rrq; /* response queue @@ -1229,10 +1267,6 @@ struct aac_dev u8 needs_dac; u8 raid_scsi_mode; u8 comm_interface; -# define AAC_COMM_PRODUCER 0 -# define AAC_COMM_MESSAGE 1 -# define AAC_COMM_MESSAGE_TYPE1 3 -# define AAC_COMM_MESSAGE_TYPE2 4 u8 raw_io_interface; u8 raw_io_64; u8 printf_enabled; diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 4f56b1003cc7..480ff01caf73 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -68,104 +68,167 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co unsigned long size, align; const unsigned long fibsize = dev->max_fib_size; const unsigned long printfbufsiz = 256; - unsigned long host_rrq_size = 0; - struct aac_init *init; + unsigned long host_rrq_size, aac_init_size; + union aac_init *init; dma_addr_t phys; unsigned long aac_max_hostphysmempages; - if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 || - dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) - host_rrq_size = (dev->scsi_host_ptr->can_queue - + AAC_NUM_MGT_FIB) * sizeof(u32); - size = fibsize + sizeof(struct aac_init) + commsize + - commalign + printfbufsiz + host_rrq_size; - + if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)) + host_rrq_size = + (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) + * sizeof(u32); + else + host_rrq_size = 0; + + aac_init_size = sizeof(union aac_init); + size = fibsize + aac_init_size + commsize + commalign + + printfbufsiz + host_rrq_size; + base = pci_alloc_consistent(dev->pdev, size, &phys); - if(base == NULL) - { + if (base == NULL) { printk(KERN_ERR "aacraid: unable to create mapping.\n"); return 0; } + dev->comm_addr = (void *)base; dev->comm_phys = phys; dev->comm_size = size; - - if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 || - dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { + + if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)) { dev->host_rrq = (u32 *)(base + fibsize); dev->host_rrq_pa = phys + fibsize; memset(dev->host_rrq, 0, host_rrq_size); } - dev->init = (struct aac_init *)(base + fibsize + host_rrq_size); + dev->init = (union aac_init *)(base + fibsize + host_rrq_size); dev->init_pa = phys + fibsize + host_rrq_size; init = dev->init; - init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION); - if (dev->max_fib_size != sizeof(struct hw_fib)) - init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4); - init->Sa_MSIXVectors = cpu_to_le32(SA_INIT_NUM_MSIXVECTORS); - init->fsrev = cpu_to_le32(dev->fsrev); + if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) { + int i; + u64 addr; + + init->r8.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_8); + init->r8.init_flags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | + INITFLAGS_DRIVER_USES_UTC_TIME | + INITFLAGS_DRIVER_SUPPORTS_PM); + init->r8.init_flags |= + cpu_to_le32(INITFLAGS_DRIVER_SUPPORTS_HBA_MODE); + init->r8.rr_queue_count = cpu_to_le32(dev->max_msix); + init->r8.max_io_size = + cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); + init->r8.max_num_aif = init->r8.reserved1 = + init->r8.reserved2 = 0; + + for (i = 0; i < dev->max_msix; i++) { + addr = (u64)dev->host_rrq_pa + dev->vector_cap * i * + sizeof(u32); + init->r8.rrq[i].host_addr_high = cpu_to_le32( + upper_32_bits(addr)); + init->r8.rrq[i].host_addr_low = cpu_to_le32( + lower_32_bits(addr)); + init->r8.rrq[i].msix_id = i; + init->r8.rrq[i].element_count = cpu_to_le16( + (u16)dev->vector_cap); + init->r8.rrq[i].comp_thresh = + init->r8.rrq[i].unused = 0; + } - /* - * Adapter Fibs are the first thing allocated so that they - * start page aligned - */ - dev->aif_base_va = (struct hw_fib *)base; - - init->AdapterFibsVirtualAddress = 0; - init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys); - init->AdapterFibsSize = cpu_to_le32(fibsize); - init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib)); - /* - * number of 4k pages of host physical memory. The aacraid fw needs - * this number to be less than 4gb worth of pages. New firmware doesn't - * have any issues with the mapping system, but older Firmware did, and - * had *troubles* dealing with the math overloading past 32 bits, thus - * we must limit this field. - */ - aac_max_hostphysmempages = dma_get_required_mask(&dev->pdev->dev) >> 12; - if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES) - init->HostPhysMemPages = cpu_to_le32(aac_max_hostphysmempages); - else - init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES); - - init->InitFlags = cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME | - INITFLAGS_DRIVER_SUPPORTS_PM); - init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); - init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); - init->MaxFibSize = cpu_to_le32(dev->max_fib_size); - init->MaxNumAif = cpu_to_le32(dev->max_num_aif); - - if (dev->comm_interface == AAC_COMM_MESSAGE) { - init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED); - dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n")); - } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) { - init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6); - init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | - INITFLAGS_NEW_COMM_TYPE1_SUPPORTED | INITFLAGS_FAST_JBOD_SUPPORTED); - init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32)); - init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff)); - dprintk((KERN_WARNING"aacraid: New Comm Interface type1 enabled\n")); - } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { - init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_7); - init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | - INITFLAGS_NEW_COMM_TYPE2_SUPPORTED | INITFLAGS_FAST_JBOD_SUPPORTED); - init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32)); - init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff)); - /* number of MSI-X */ - init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix); - dprintk((KERN_WARNING"aacraid: New Comm Interface type2 enabled\n")); + pr_warn("aacraid: Comm Interface type3 enabled\n"); + } else { + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION); + if (dev->max_fib_size != sizeof(struct hw_fib)) + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4); + init->r7.no_of_msix_vectors = cpu_to_le32(SA_MINIPORT_REVISION); + init->r7.fsrev = cpu_to_le32(dev->fsrev); + + /* + * Adapter Fibs are the first thing allocated so that they + * start page aligned + */ + dev->aif_base_va = (struct hw_fib *)base; + + init->r7.adapter_fibs_virtual_address = 0; + init->r7.adapter_fibs_physical_address = cpu_to_le32((u32)phys); + init->r7.adapter_fibs_size = cpu_to_le32(fibsize); + init->r7.adapter_fib_align = cpu_to_le32(sizeof(struct hw_fib)); + + /* + * number of 4k pages of host physical memory. The aacraid fw + * needs this number to be less than 4gb worth of pages. New + * firmware doesn't have any issues with the mapping system, but + * older Firmware did, and had *troubles* dealing with the math + * overloading past 32 bits, thus we must limit this field. + */ + aac_max_hostphysmempages = + dma_get_required_mask(&dev->pdev->dev) >> 12; + if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES) + init->r7.host_phys_mem_pages = + cpu_to_le32(aac_max_hostphysmempages); + else + init->r7.host_phys_mem_pages = + cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES); + + init->r7.init_flags = + cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME | + INITFLAGS_DRIVER_SUPPORTS_PM); + init->r7.max_io_commands = + cpu_to_le32(dev->scsi_host_ptr->can_queue + + AAC_NUM_MGT_FIB); + init->r7.max_io_size = + cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); + init->r7.max_fib_size = cpu_to_le32(dev->max_fib_size); + init->r7.max_num_aif = cpu_to_le32(dev->max_num_aif); + + if (dev->comm_interface == AAC_COMM_MESSAGE) { + init->r7.init_flags |= + cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED); + pr_warn("aacraid: Comm Interface enabled\n"); + } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) { + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6); + init->r7.init_flags |= + cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | + INITFLAGS_NEW_COMM_TYPE1_SUPPORTED | + INITFLAGS_FAST_JBOD_SUPPORTED); + init->r7.host_rrq_addr_high = + cpu_to_le32(upper_32_bits(dev->host_rrq_pa)); + init->r7.host_rrq_addr_low = + cpu_to_le32(lower_32_bits(dev->host_rrq_pa)); + pr_warn("aacraid: Comm Interface type1 enabled\n"); + } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_7); + init->r7.init_flags |= + cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | + INITFLAGS_NEW_COMM_TYPE2_SUPPORTED | + INITFLAGS_FAST_JBOD_SUPPORTED); + init->r7.host_rrq_addr_high = + cpu_to_le32(upper_32_bits(dev->host_rrq_pa)); + init->r7.host_rrq_addr_low = + cpu_to_le32(lower_32_bits(dev->host_rrq_pa)); + init->r7.no_of_msix_vectors = + cpu_to_le32(dev->max_msix); + /* must be the COMM_PREFERRED_SETTINGS values */ + pr_warn("aacraid: Comm Interface type2 enabled\n"); + } } /* * Increment the base address by the amount already used */ - base = base + fibsize + host_rrq_size + sizeof(struct aac_init); + base = base + fibsize + host_rrq_size + aac_init_size; phys = (dma_addr_t)((ulong)phys + fibsize + host_rrq_size + - sizeof(struct aac_init)); + aac_init_size); /* * Align the beginning of Headers to commalign @@ -177,7 +240,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co * Fill in addresses of the Comm Area Headers and Queues */ *commaddr = base; - init->CommHeaderAddress = cpu_to_le32((u32)phys); + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3) + init->r7.comm_header_address = cpu_to_le32((u32)phys); /* * Increment the base address by the size of the CommArea */ @@ -187,12 +251,14 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co * Place the Printf buffer area after the Fast I/O comm area. */ dev->printfbuf = (void *)base; - init->printfbuf = cpu_to_le32(phys); - init->printfbufsiz = cpu_to_le32(printfbufsiz); + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3) { + init->r7.printfbuf = cpu_to_le32(phys); + init->r7.printfbufsiz = cpu_to_le32(printfbufsiz); + } memset(base, 0, printfbufsiz); return 1; } - + static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize) { atomic_set(&q->numpending, 0); @@ -436,26 +502,27 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 0, 0, 0, 0, 0, 0, - status+0, status+1, status+2, status+3, NULL)) && - (status[0] == 0x00000001)) { + status+0, status+1, status+2, status+3, status+4)) && + (status[0] == 0x00000001)) { dev->doorbell_mask = status[3]; - if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64)) + if (status[1] & AAC_OPT_NEW_COMM_64) dev->raw_io_64 = 1; dev->sync_mode = aac_sync_mode; if (dev->a_ops.adapter_comm && - (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM))) { + (status[1] & AAC_OPT_NEW_COMM)) { dev->comm_interface = AAC_COMM_MESSAGE; dev->raw_io_interface = 1; - if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE1))) { + if ((status[1] & AAC_OPT_NEW_COMM_TYPE1)) { /* driver supports TYPE1 (Tupelo) */ dev->comm_interface = AAC_COMM_MESSAGE_TYPE1; - } else if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE2))) { - /* driver supports TYPE2 (Denali) */ + } else if (status[1] & AAC_OPT_NEW_COMM_TYPE2) { + /* driver supports TYPE2 (Denali, Yosemite) */ dev->comm_interface = AAC_COMM_MESSAGE_TYPE2; - } else if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE4)) || - (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE3))) { - /* driver doesn't TYPE3 and TYPE4 */ - /* switch to sync. mode */ + } else if (status[1] & AAC_OPT_NEW_COMM_TYPE3) { + /* driver supports TYPE3 (Yosemite, Thor) */ + dev->comm_interface = AAC_COMM_MESSAGE_TYPE3; + } else if (status[1] & AAC_OPT_NEW_COMM_TYPE4) { + /* not supported TYPE - switch to sync. mode */ dev->comm_interface = AAC_COMM_MESSAGE_TYPE2; dev->sync_mode = 1; } diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 9e7551fe4b19..d18ed9ad45b3 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -129,11 +129,14 @@ int aac_fib_setup(struct aac_dev * dev) struct hw_fib *hw_fib; dma_addr_t hw_fib_pa; int i; + u32 max_cmds; while (((i = fib_map_alloc(dev)) == -ENOMEM) && (dev->scsi_host_ptr->can_queue > (64 - AAC_NUM_MGT_FIB))) { - dev->init->MaxIoCommands = cpu_to_le32((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) >> 1); - dev->scsi_host_ptr->can_queue = le32_to_cpu(dev->init->MaxIoCommands) - AAC_NUM_MGT_FIB; + max_cmds = (dev->scsi_host_ptr->can_queue+AAC_NUM_MGT_FIB) >> 1; + dev->scsi_host_ptr->can_queue = max_cmds - AAC_NUM_MGT_FIB; + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3) + dev->init->r7.max_io_commands = cpu_to_le32(max_cmds); } if (i<0) return -ENOMEM; @@ -761,7 +764,8 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size) unsigned long qflags; if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 || - dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { + dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 || + dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) { kfree(hw_fib); return 0; } @@ -1817,7 +1821,8 @@ int aac_command_thread(void *data) * and pre-allocate a set of fibs outside the * lock. */ - num = le32_to_cpu(dev->init->AdapterFibsSize) + num = le32_to_cpu(dev->init-> + r7.adapter_fibs_size) / sizeof(struct hw_fib); /* some extra */ spin_lock_irqsave(&dev->fib_lock, flagv); entry = dev->fib_list.next; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index fd26a2d95239..0f3de1ee0e62 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1368,7 +1368,7 @@ static int aac_acquire_resources(struct aac_dev *dev) /* After EEH recovery or suspend resume, max_msix count * may change, therfore updating in init as well. */ - dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix); + dev->init->r7.no_of_msix_vectors = cpu_to_le32(dev->max_msix); aac_adapter_start(dev); } return 0; diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c index 7d8013feedde..6dff8ada4935 100644 --- a/drivers/scsi/aacraid/rkt.c +++ b/drivers/scsi/aacraid/rkt.c @@ -60,7 +60,7 @@ static int aac_rkt_select_comm(struct aac_dev *dev, int comm) * case warrants this half baked, but convenient, check here. */ if (dev->scsi_host_ptr->can_queue > AAC_NUM_IO_FIB_RKT) { - dev->init->MaxIoCommands = + dev->init->r7.max_io_commands = cpu_to_le32(AAC_NUM_IO_FIB_RKT + AAC_NUM_MGT_FIB); dev->scsi_host_ptr->can_queue = AAC_NUM_IO_FIB_RKT; } diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index ac1638069335..67213b95b8b6 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -315,10 +315,10 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event) static void aac_rx_start_adapter(struct aac_dev *dev) { - struct aac_init *init; + union aac_init *init; init = dev->init; - init->HostElapsedSeconds = cpu_to_le32(get_seconds()); + init->r7.host_elapsed_seconds = cpu_to_le32(get_seconds()); // We can only use a 32 bit address here rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index 869aea23c041..b8538e017e10 100644 --- a/drivers/scsi/aacraid/sa.c +++ b/drivers/scsi/aacraid/sa.c @@ -245,12 +245,12 @@ static void aac_sa_interrupt_adapter (struct aac_dev *dev) static void aac_sa_start_adapter(struct aac_dev *dev) { - struct aac_init *init; + union aac_init *init; /* * Fill in the remaining pieces of the init. */ init = dev->init; - init->HostElapsedSeconds = cpu_to_le32(get_seconds()); + init->r7.host_elapsed_seconds = cpu_to_le32(get_seconds()); /* We can only use a 32 bit address here */ sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 0c453880f214..a5f7a6f2f3d7 100644 --- a/drivers/scsi/aacraid/src.c +++ b/drivers/scsi/aacraid/src.c @@ -384,7 +384,7 @@ static void aac_src_notify_adapter(struct aac_dev *dev, u32 event) static void aac_src_start_adapter(struct aac_dev *dev) { - struct aac_init *init; + union aac_init *init; int i; /* reset host_rrq_idx first */ @@ -395,11 +395,22 @@ static void aac_src_start_adapter(struct aac_dev *dev) dev->fibs_pushed_no = 0; init = dev->init; - init->HostElapsedSeconds = cpu_to_le32(get_seconds()); + if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) { + init->r8.host_elapsed_seconds = cpu_to_le32(get_seconds()); + src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, + (u32)(ulong)dev->init_pa, + (u32)((ulong)dev->init_pa>>32), + sizeof(struct _r8) + + (AAC_MAX_HRRQ - 1) * sizeof(struct _rrq), + 0, 0, 0, NULL, NULL, NULL, NULL, NULL); + } else { + init->r7.host_elapsed_seconds = cpu_to_le32(get_seconds()); + // We can only use a 32 bit address here + src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, + (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); + } - /* We can only use a 32 bit address here */ - src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, - 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** @@ -467,7 +478,8 @@ static int aac_src_deliver_message(struct fib *fib) atomic_inc(&dev->rrq_outstanding[vector_no]); - if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { + if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)) { /* Calculate the amount to the fibsize bits */ fibsize = (hdr_size + 127) / 128 - 1; if (fibsize > (ALIGN32 - 1)) @@ -897,7 +909,8 @@ int aac_srcv_init(struct aac_dev *dev) if (aac_init_adapter(dev) == NULL) goto error_iounmap; - if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE2) + if ((dev->comm_interface != AAC_COMM_MESSAGE_TYPE2) && + (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3)) goto error_iounmap; if (dev->msi_enabled) aac_src_access_devreg(dev, AAC_ENABLE_MSIX); |