1 files changed, 594 insertions, 0 deletions

diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
new file mode 100644
index 000000000000..c20494660603
--- /dev/null
+++ b/drivers/scsi/aacraid/src.c
@@ -0,0 +1,594 @@
+/*
+ *	Adaptec AAC series RAID controller driver
+ *	(c) Copyright 2001 Red Hat Inc.
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ *               2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ *  src.c
+ *
+ * Abstract: Hardware Device Interface for PMC SRC based controllers
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <linux/completion.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
+{
+	struct aac_dev *dev = dev_id;
+	unsigned long bellbits, bellbits_shifted;
+	int our_interrupt = 0;
+	int isFastResponse;
+	u32 index, handle;
+
+	bellbits = src_readl(dev, MUnit.ODR_R);
+	if (bellbits & PmDoorBellResponseSent) {
+		bellbits = PmDoorBellResponseSent;
+		/* handle async. status */
+		our_interrupt = 1;
+		index = dev->host_rrq_idx;
+		if (dev->host_rrq[index] == 0) {
+			u32 old_index = index;
+			/* adjust index */
+			do {
+				index++;
+				if (index == dev->scsi_host_ptr->can_queue +
+							AAC_NUM_MGT_FIB)
+					index = 0;
+				if (dev->host_rrq[index] != 0)
+					break;
+			} while (index != old_index);
+			dev->host_rrq_idx = index;
+		}
+		for (;;) {
+			isFastResponse = 0;
+			/* remove toggle bit (31) */
+			handle = (dev->host_rrq[index] & 0x7fffffff);
+			/* check fast response bit (30) */
+			if (handle & 0x40000000)
+				isFastResponse = 1;
+			handle &= 0x0000ffff;
+			if (handle == 0)
+				break;
+
+			aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
+
+			dev->host_rrq[index++] = 0;
+			if (index == dev->scsi_host_ptr->can_queue +
+						AAC_NUM_MGT_FIB)
+				index = 0;
+			dev->host_rrq_idx = index;
+		}
+	} else {
+		bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
+		if (bellbits_shifted & DoorBellAifPending) {
+			our_interrupt = 1;
+			/* handle AIF */
+			aac_intr_normal(dev, 0, 2, 0, NULL);
+		}
+	}
+
+	if (our_interrupt) {
+		src_writel(dev, MUnit.ODR_C, bellbits);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+/**
+ *	aac_src_disable_interrupt	-	Disable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_src_disable_interrupt(struct aac_dev *dev)
+{
+	src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
+}
+
+/**
+ *	aac_src_enable_interrupt_message	-	Enable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_src_enable_interrupt_message(struct aac_dev *dev)
+{
+	src_writel(dev, MUnit.OIMR, dev->OIMR = 0xfffffff8);
+}
+
+/**
+ *	src_sync_cmd	-	send a command and wait
+ *	@dev: Adapter
+ *	@command: Command to execute
+ *	@p1: first parameter
+ *	@ret: adapter status
+ *
+ *	This routine will send a synchronous command to the adapter and wait
+ *	for its	completion.
+ */
+
+static int src_sync_cmd(struct aac_dev *dev, u32 command,
+	u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
+	u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
+{
+	unsigned long start;
+	int ok;
+
+	/*
+	 *	Write the command into Mailbox 0
+	 */
+	writel(command, &dev->IndexRegs->Mailbox[0]);
+	/*
+	 *	Write the parameters into Mailboxes 1 - 6
+	 */
+	writel(p1, &dev->IndexRegs->Mailbox[1]);
+	writel(p2, &dev->IndexRegs->Mailbox[2]);
+	writel(p3, &dev->IndexRegs->Mailbox[3]);
+	writel(p4, &dev->IndexRegs->Mailbox[4]);
+
+	/*
+	 *	Clear the synch command doorbell to start on a clean slate.
+	 */
+	src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+
+	/*
+	 *	Disable doorbell interrupts
+	 */
+	src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
+
+	/*
+	 *	Force the completion of the mask register write before issuing
+	 *	the interrupt.
+	 */
+	src_readl(dev, MUnit.OIMR);
+
+	/*
+	 *	Signal that there is a new synch command
+	 */
+	src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
+
+	ok = 0;
+	start = jiffies;
+
+	/*
+	 *	Wait up to 30 seconds
+	 */
+	while (time_before(jiffies, start+30*HZ)) {
+		/* Delay 5 microseconds to let Mon960 get info. */
+		udelay(5);
+
+		/* Mon960 will set doorbell0 bit
+		 * when it has completed the command
+		 */
+		if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) {
+			/* Clear the doorbell */
+			src_writel(dev,
+				MUnit.ODR_C,
+				OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+			ok = 1;
+			break;
+		}
+
+		 /* Yield the processor in case we are slow */
+		msleep(1);
+	}
+	if (unlikely(ok != 1)) {
+		 /* Restore interrupt mask even though we timed out */
+		aac_adapter_enable_int(dev);
+		return -ETIMEDOUT;
+	}
+
+	 /* Pull the synch status from Mailbox 0 */
+	if (status)
+		*status = readl(&dev->IndexRegs->Mailbox[0]);
+	if (r1)
+		*r1 = readl(&dev->IndexRegs->Mailbox[1]);
+	if (r2)
+		*r2 = readl(&dev->IndexRegs->Mailbox[2]);
+	if (r3)
+		*r3 = readl(&dev->IndexRegs->Mailbox[3]);
+	if (r4)
+		*r4 = readl(&dev->IndexRegs->Mailbox[4]);
+
+	 /* Clear the synch command doorbell */
+	src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+
+	 /* Restore interrupt mask */
+	aac_adapter_enable_int(dev);
+	return 0;
+
+}
+
+/**
+ *	aac_src_interrupt_adapter	-	interrupt adapter
+ *	@dev: Adapter
+ *
+ *	Send an interrupt to the i960 and breakpoint it.
+ */
+
+static void aac_src_interrupt_adapter(struct aac_dev *dev)
+{
+	src_sync_cmd(dev, BREAKPOINT_REQUEST,
+		0, 0, 0, 0, 0, 0,
+		NULL, NULL, NULL, NULL, NULL);
+}
+
+/**
+ *	aac_src_notify_adapter		-	send an event to the adapter
+ *	@dev: Adapter
+ *	@event: Event to send
+ *
+ *	Notify the i960 that something it probably cares about has
+ *	happened.
+ */
+
+static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
+{
+	switch (event) {
+
+	case AdapNormCmdQue:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
+		break;
+	case HostNormRespNotFull:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
+		break;
+	case AdapNormRespQue:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
+		break;
+	case HostNormCmdNotFull:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
+		break;
+	case FastIo:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
+		break;
+	case AdapPrintfDone:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
+		break;
+	default:
+		BUG();
+		break;
+	}
+}
+
+/**
+ *	aac_src_start_adapter		-	activate adapter
+ *	@dev:	Adapter
+ *
+ *	Start up processing on an i960 based AAC adapter
+ */
+
+static void aac_src_start_adapter(struct aac_dev *dev)
+{
+	struct aac_init *init;
+
+	init = dev->init;
+	init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+
+	/* We can only use a 32 bit address here */
+	src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
+	  0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+}
+
+/**
+ *	aac_src_check_health
+ *	@dev: device to check if healthy
+ *
+ *	Will attempt to determine if the specified adapter is alive and
+ *	capable of handling requests, returning 0 if alive.
+ */
+static int aac_src_check_health(struct aac_dev *dev)
+{
+	u32 status = src_readl(dev, MUnit.OMR);
+
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	if (unlikely(status & SELF_TEST_FAILED))
+		return -1;
+
+	/*
+	 *	Check to see if the board panic'd.
+	 */
+	if (unlikely(status & KERNEL_PANIC))
+		return (status >> 16) & 0xFF;
+	/*
+	 *	Wait for the adapter to be up and running.
+	 */
+	if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
+		return -3;
+	/*
+	 *	Everything is OK
+	 */
+	return 0;
+}
+
+/**
+ *	aac_src_deliver_message
+ *	@fib: fib to issue
+ *
+ *	Will send a fib, returning 0 if successful.
+ */
+static int aac_src_deliver_message(struct fib *fib)
+{
+	struct aac_dev *dev = fib->dev;
+	struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
+	unsigned long qflags;
+	u32 fibsize;
+	u64 address;
+	struct aac_fib_xporthdr *pFibX;
+
+	spin_lock_irqsave(q->lock, qflags);
+	q->numpending++;
+	spin_unlock_irqrestore(q->lock, qflags);
+
+	/* Calculate the amount to the fibsize bits */
+	fibsize = (sizeof(struct aac_fib_xporthdr) +
+		fib->hw_fib_va->header.Size + 127) / 128 - 1;
+	if (fibsize > (ALIGN32 - 1))
+		fibsize = ALIGN32 - 1;
+
+    /* Fill XPORT header */
+	pFibX = (struct aac_fib_xporthdr *)
+		((unsigned char *)fib->hw_fib_va -
+		sizeof(struct aac_fib_xporthdr));
+	pFibX->Handle = fib->hw_fib_va->header.SenderData + 1;
+	pFibX->HostAddress = fib->hw_fib_pa;
+	pFibX->Size = fib->hw_fib_va->header.Size;
+	address = fib->hw_fib_pa - (u64)sizeof(struct aac_fib_xporthdr);
+
+	src_writel(dev, MUnit.IQ_H, (u32)(address >> 32));
+	src_writel(dev, MUnit.IQ_L, (u32)(address & 0xffffffff) + fibsize);
+	return 0;
+}
+
+/**
+ *	aac_src_ioremap
+ *	@size: mapping resize request
+ *
+ */
+static int aac_src_ioremap(struct aac_dev *dev, u32 size)
+{
+	if (!size) {
+		iounmap(dev->regs.src.bar0);
+		dev->regs.src.bar0 = NULL;
+		iounmap(dev->base);
+		dev->base = NULL;
+		return 0;
+	}
+	dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
+		AAC_MIN_SRC_BAR1_SIZE);
+	dev->base = NULL;
+	if (dev->regs.src.bar1 == NULL)
+		return -1;
+	dev->base = dev->regs.src.bar0 = ioremap(dev->scsi_host_ptr->base,
+				size);
+	if (dev->base == NULL) {
+		iounmap(dev->regs.src.bar1);
+		dev->regs.src.bar1 = NULL;
+		return -1;
+	}
+	dev->IndexRegs = &((struct src_registers __iomem *)
+		dev->base)->IndexRegs;
+	return 0;
+}
+
+static int aac_src_restart_adapter(struct aac_dev *dev, int bled)
+{
+	u32 var, reset_mask;
+
+	if (bled >= 0) {
+		if (bled)
+			printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
+				dev->name, dev->id, bled);
+		bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
+			0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL);
+			if (bled || (var != 0x00000001))
+				bled = -EINVAL;
+		if (dev->supplement_adapter_info.SupportedOptions2 &
+			AAC_OPTION_DOORBELL_RESET) {
+			src_writel(dev, MUnit.IDR, reset_mask);
+			msleep(5000); /* Delay 5 seconds */
+		}
+	}
+
+	if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
+		return -ENODEV;
+
+	if (startup_timeout < 300)
+		startup_timeout = 300;
+
+	return 0;
+}
+
+/**
+ *	aac_src_select_comm	-	Select communications method
+ *	@dev: Adapter
+ *	@comm: communications method
+ */
+int aac_src_select_comm(struct aac_dev *dev, int comm)
+{
+	switch (comm) {
+	case AAC_COMM_MESSAGE:
+		dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
+		dev->a_ops.adapter_intr = aac_src_intr_message;
+		dev->a_ops.adapter_deliver = aac_src_deliver_message;
+		break;
+	default:
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ *  aac_src_init	-	initialize an Cardinal Frey Bar card
+ *  @dev: device to configure
+ *
+ */
+
+int aac_src_init(struct aac_dev *dev)
+{
+	unsigned long start;
+	unsigned long status;
+	int restart = 0;
+	int instance = dev->id;
+	const char *name = dev->name;
+
+	dev->a_ops.adapter_ioremap = aac_src_ioremap;
+	dev->a_ops.adapter_comm = aac_src_select_comm;
+
+	dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
+	if (aac_adapter_ioremap(dev, dev->base_size)) {
+		printk(KERN_WARNING "%s: unable to map adapter.\n", name);
+		goto error_iounmap;
+	}
+
+	/* Failure to reset here is an option ... */
+	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+	dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+	if ((aac_reset_devices || reset_devices) &&
+		!aac_src_restart_adapter(dev, 0))
+		++restart;
+	/*
+	 *	Check to see if the board panic'd while booting.
+	 */
+	status = src_readl(dev, MUnit.OMR);
+	if (status & KERNEL_PANIC) {
+		if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
+			goto error_iounmap;
+		++restart;
+	}
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	status = src_readl(dev, MUnit.OMR);
+	if (status & SELF_TEST_FAILED) {
+		printk(KERN_ERR "%s%d: adapter self-test failed.\n",
+			dev->name, instance);
+		goto error_iounmap;
+	}
+	/*
+	 *	Check to see if the monitor panic'd while booting.
+	 */
+	if (status & MONITOR_PANIC) {
+		printk(KERN_ERR "%s%d: adapter monitor panic.\n",
+			dev->name, instance);
+		goto error_iounmap;
+	}
+	start = jiffies;
+	/*
+	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
+	 */
+	while (!((status = src_readl(dev, MUnit.OMR)) &
+		KERNEL_UP_AND_RUNNING)) {
+		if ((restart &&
+		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
+		  time_after(jiffies, start+HZ*startup_timeout)) {
+			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
+					dev->name, instance, status);
+			goto error_iounmap;
+		}
+		if (!restart &&
+		  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
+		  time_after(jiffies, start + HZ *
+		  ((startup_timeout > 60)
+		    ? (startup_timeout - 60)
+		    : (startup_timeout / 2))))) {
+			if (likely(!aac_src_restart_adapter(dev,
+			    aac_src_check_health(dev))))
+				start = jiffies;
+			++restart;
+		}
+		msleep(1);
+	}
+	if (restart && aac_commit)
+		aac_commit = 1;
+	/*
+	 *	Fill in the common function dispatch table.
+	 */
+	dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
+	dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
+	dev->a_ops.adapter_notify = aac_src_notify_adapter;
+	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+	dev->a_ops.adapter_check_health = aac_src_check_health;
+	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	aac_adapter_comm(dev, AAC_COMM_MESSAGE);
+	aac_adapter_disable_int(dev);
+	src_writel(dev, MUnit.ODR_C, 0xffffffff);
+	aac_adapter_enable_int(dev);
+
+	if (aac_init_adapter(dev) == NULL)
+		goto error_iounmap;
+	if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
+		goto error_iounmap;
+
+	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+
+	if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
+
+		if (dev->msi)
+			pci_disable_msi(dev->pdev);
+
+		printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+			name, instance);
+		goto error_iounmap;
+	}
+	dev->dbg_base = pci_resource_start(dev->pdev, 2);
+	dev->dbg_base_mapped = dev->regs.src.bar1;
+	dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
+
+	aac_adapter_enable_int(dev);
+	/*
+	 *	Tell the adapter that all is configured, and it can
+	 * start accepting requests
+	 */
+	aac_src_start_adapter(dev);
+
+	return 0;
+
+error_iounmap:
+
+	return -1;
+}