diff options
Diffstat (limited to 'drivers/s390/char/tape_34xx.c')
| -rw-r--r-- | drivers/s390/char/tape_34xx.c | 161 |
1 files changed, 70 insertions, 91 deletions
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 22ca34361ed7..807ded5eb049 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -8,6 +8,8 @@ * Martin Schwidefsky <schwidefsky@de.ibm.com> */ +#define KMSG_COMPONENT "tape" + #include <linux/module.h> #include <linux/init.h> #include <linux/bio.h> @@ -18,8 +20,6 @@ #include "tape.h" #include "tape_std.h" -#define PRINTK_HEADER "TAPE_34XX: " - /* * Pointer to debug area. */ @@ -203,8 +203,7 @@ tape_34xx_unsolicited_irq(struct tape_device *device, struct irb *irb) tape_34xx_schedule_work(device, TO_MSEN); } else { DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id); - PRINT_WARN("Unsolicited IRQ (Device End) caught.\n"); - tape_dump_sense(device, NULL, irb); + tape_dump_sense_dbf(device, NULL, irb); } return TAPE_IO_SUCCESS; } @@ -226,9 +225,7 @@ tape_34xx_erp_read_opposite(struct tape_device *device, tape_std_read_backward(device, request); return tape_34xx_erp_retry(request); } - if (request->op != TO_RBA) - PRINT_ERR("read_opposite called with state:%s\n", - tape_op_verbose[request->op]); + /* * We tried to read forward and backward, but hat no * success -> failed. @@ -241,13 +238,9 @@ tape_34xx_erp_bug(struct tape_device *device, struct tape_request *request, struct irb *irb, int no) { if (request->op != TO_ASSIGN) { - PRINT_WARN("An unexpected condition #%d was caught in " - "tape error recovery.\n", no); - PRINT_WARN("Please report this incident.\n"); - if (request) - PRINT_WARN("Operation of tape:%s\n", - tape_op_verbose[request->op]); - tape_dump_sense(device, request, irb); + dev_err(&device->cdev->dev, "An unexpected condition %d " + "occurred in tape error recovery\n", no); + tape_dump_sense_dbf(device, request, irb); } return tape_34xx_erp_failed(request, -EIO); } @@ -261,9 +254,8 @@ tape_34xx_erp_overrun(struct tape_device *device, struct tape_request *request, struct irb *irb) { if (irb->ecw[3] == 0x40) { - PRINT_WARN ("Data overrun error between control-unit " - "and drive. Use a faster channel connection, " - "if possible! \n"); + dev_warn (&device->cdev->dev, "A data overrun occurred between" + " the control unit and tape unit\n"); return tape_34xx_erp_failed(request, -EIO); } return tape_34xx_erp_bug(device, request, irb, -1); @@ -280,7 +272,8 @@ tape_34xx_erp_sequence(struct tape_device *device, /* * cu detected incorrect block-id sequence on tape. */ - PRINT_WARN("Illegal block-id sequence found!\n"); + dev_warn (&device->cdev->dev, "The block ID sequence on the " + "tape is incorrect\n"); return tape_34xx_erp_failed(request, -EIO); } /* @@ -393,8 +386,6 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, /* Writing at physical end of volume */ return tape_34xx_erp_failed(request, -ENOSPC); default: - PRINT_ERR("Invalid op in %s:%i\n", - __func__, __LINE__); return tape_34xx_erp_failed(request, 0); } } @@ -420,7 +411,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, irb, -4); /* data check is permanent, CU recovery has failed */ - PRINT_WARN("Permanent read error\n"); + dev_warn (&device->cdev->dev, "A read error occurred " + "that cannot be recovered\n"); return tape_34xx_erp_failed(request, -EIO); case 0x25: // a write data check occurred @@ -433,22 +425,26 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, irb, -5); // data check is permanent, cu-recovery has failed - PRINT_WARN("Permanent write error\n"); + dev_warn (&device->cdev->dev, "A write error on the " + "tape cannot be recovered\n"); return tape_34xx_erp_failed(request, -EIO); case 0x26: /* Data Check (read opposite) occurred. */ return tape_34xx_erp_read_opposite(device, request); case 0x28: /* ID-Mark at tape start couldn't be written */ - PRINT_WARN("ID-Mark could not be written.\n"); + dev_warn (&device->cdev->dev, "Writing the ID-mark " + "failed\n"); return tape_34xx_erp_failed(request, -EIO); case 0x31: /* Tape void. Tried to read beyond end of device. */ - PRINT_WARN("Read beyond end of recorded area.\n"); + dev_warn (&device->cdev->dev, "Reading the tape beyond" + " the end of the recorded area failed\n"); return tape_34xx_erp_failed(request, -ENOSPC); case 0x41: /* Record sequence error. */ - PRINT_WARN("Invalid block-id sequence found.\n"); + dev_warn (&device->cdev->dev, "The tape contains an " + "incorrect block ID sequence\n"); return tape_34xx_erp_failed(request, -EIO); default: /* all data checks for 3480 should result in one of @@ -470,16 +466,12 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, switch (sense[3]) { case 0x00: /* Unit check with erpa code 0. Report and ignore. */ - PRINT_WARN("Non-error sense was found. " - "Unit-check will be ignored.\n"); return TAPE_IO_SUCCESS; case 0x21: /* * Data streaming not operational. CU will switch to * interlock mode. Reissue the command. */ - PRINT_WARN("Data streaming not operational. " - "Switching to interlock-mode.\n"); return tape_34xx_erp_retry(request); case 0x22: /* @@ -487,11 +479,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * error on the lower interface, internal path not usable, * or error during cartridge load. */ - PRINT_WARN("A path equipment check occurred. One of the " - "following conditions occurred:\n"); - PRINT_WARN("drive adapter error, buffer error on the lower " - "interface, internal path not usable, error " - "during cartridge load.\n"); + dev_warn (&device->cdev->dev, "A path equipment check occurred" + " for the tape device\n"); return tape_34xx_erp_failed(request, -EIO); case 0x24: /* @@ -514,7 +503,6 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * but the hardware isn't capable to do idrc, or a perform * subsystem func is issued and the CU is not on-line. */ - PRINT_WARN ("Function incompatible. Try to switch off idrc\n"); return tape_34xx_erp_failed(request, -EIO); case 0x2a: /* @@ -552,23 +540,26 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * reading the format id mark or that that format specified * is not supported by the drive. */ - PRINT_WARN("Drive not capable processing the tape format!\n"); + dev_warn (&device->cdev->dev, "The tape unit cannot process " + "the tape format\n"); return tape_34xx_erp_failed(request, -EMEDIUMTYPE); case 0x30: /* The medium is write protected. */ - PRINT_WARN("Medium is write protected!\n"); + dev_warn (&device->cdev->dev, "The tape medium is write-" + "protected\n"); return tape_34xx_erp_failed(request, -EACCES); case 0x32: // Tension loss. We cannot recover this, it's an I/O error. - PRINT_WARN("The drive lost tape tension.\n"); + dev_warn (&device->cdev->dev, "The tape does not have the " + "required tape tension\n"); return tape_34xx_erp_failed(request, -EIO); case 0x33: /* * Load Failure. The cartridge was not inserted correctly or * the tape is not threaded correctly. */ - PRINT_WARN("Cartridge load failure. Reload the cartridge " - "and try again.\n"); + dev_warn (&device->cdev->dev, "The tape unit failed to load" + " the cartridge\n"); tape_34xx_delete_sbid_from(device, 0); return tape_34xx_erp_failed(request, -EIO); case 0x34: @@ -576,8 +567,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * Unload failure. The drive cannot maintain tape tension * and control tape movement during an unload operation. */ - PRINT_WARN("Failure during cartridge unload. " - "Please try manually.\n"); + dev_warn (&device->cdev->dev, "Automatic unloading of the tape" + " cartridge failed\n"); if (request->op == TO_RUN) return tape_34xx_erp_failed(request, -EIO); return tape_34xx_erp_bug(device, request, irb, sense[3]); @@ -589,8 +580,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * - the cartridge loader does not respond correctly * - a failure occurs during an index, load, or unload cycle */ - PRINT_WARN("Equipment check! Please check the drive and " - "the cartridge loader.\n"); + dev_warn (&device->cdev->dev, "An equipment check has occurred" + " on the tape unit\n"); return tape_34xx_erp_failed(request, -EIO); case 0x36: if (device->cdev->id.driver_info == tape_3490) @@ -603,7 +594,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * Tape length error. The tape is shorter than reported in * the beginning-of-tape data. */ - PRINT_WARN("Tape length error.\n"); + dev_warn (&device->cdev->dev, "The tape information states an" + " incorrect length\n"); return tape_34xx_erp_failed(request, -EIO); case 0x38: /* @@ -620,12 +612,12 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, return tape_34xx_erp_failed(request, -EIO); case 0x3a: /* Drive switched to not ready. */ - PRINT_WARN("Drive not ready. Turn the ready/not ready switch " - "to ready position and try again.\n"); + dev_warn (&device->cdev->dev, "The tape unit is not ready\n"); return tape_34xx_erp_failed(request, -EIO); case 0x3b: /* Manual rewind or unload. This causes an I/O error. */ - PRINT_WARN("Medium was rewound or unloaded manually.\n"); + dev_warn (&device->cdev->dev, "The tape medium has been " + "rewound or unloaded manually\n"); tape_34xx_delete_sbid_from(device, 0); return tape_34xx_erp_failed(request, -EIO); case 0x42: @@ -633,7 +625,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * Degraded mode. A condition that can cause degraded * performance is detected. */ - PRINT_WARN("Subsystem is running in degraded mode.\n"); + dev_warn (&device->cdev->dev, "The tape subsystem is running " + "in degraded mode\n"); return tape_34xx_erp_retry(request); case 0x43: /* Drive not ready. */ @@ -652,7 +645,6 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, break; } } - PRINT_WARN("The drive is not ready.\n"); return tape_34xx_erp_failed(request, -ENOMEDIUM); case 0x44: /* Locate Block unsuccessful. */ @@ -663,7 +655,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, return tape_34xx_erp_failed(request, -EIO); case 0x45: /* The drive is assigned to a different channel path. */ - PRINT_WARN("The drive is assigned elsewhere.\n"); + dev_warn (&device->cdev->dev, "The tape unit is already " + "assigned\n"); return tape_34xx_erp_failed(request, -EIO); case 0x46: /* @@ -671,11 +664,12 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * the power supply may be switched off or * the drive address may not be set correctly. */ - PRINT_WARN("The drive is not on-line."); + dev_warn (&device->cdev->dev, "The tape unit is not online\n"); return tape_34xx_erp_failed(request, -EIO); case 0x47: /* Volume fenced. CU reports volume integrity is lost. */ - PRINT_WARN("Volume fenced. The volume integrity is lost.\n"); + dev_warn (&device->cdev->dev, "The control unit has fenced " + "access to the tape volume\n"); tape_34xx_delete_sbid_from(device, 0); return tape_34xx_erp_failed(request, -EIO); case 0x48: @@ -683,20 +677,21 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, return tape_34xx_erp_retry(request); case 0x49: /* Bus out check. A parity check error on the bus was found. */ - PRINT_WARN("Bus out check. A data transfer over the bus " - "has been corrupted.\n"); + dev_warn (&device->cdev->dev, "A parity error occurred on the " + "tape bus\n"); return tape_34xx_erp_failed(request, -EIO); case 0x4a: /* Control unit erp failed. */ - PRINT_WARN("The control unit I/O error recovery failed.\n"); + dev_warn (&device->cdev->dev, "I/O error recovery failed on " + "the tape control unit\n"); return tape_34xx_erp_failed(request, -EIO); case 0x4b: /* * CU and drive incompatible. The drive requests micro-program * patches, which are not available on the CU. */ - PRINT_WARN("The drive needs microprogram patches from the " - "control unit, which are not available.\n"); + dev_warn (&device->cdev->dev, "The tape unit requires a " + "firmware update\n"); return tape_34xx_erp_failed(request, -EIO); case 0x4c: /* @@ -721,8 +716,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * the block to be written is larger than allowed for * buffered mode. */ - PRINT_WARN("Maximum block size for buffered " - "mode exceeded.\n"); + dev_warn (&device->cdev->dev, "The maximum block size" + " for buffered mode is exceeded\n"); return tape_34xx_erp_failed(request, -ENOBUFS); } /* This erpa is reserved for 3480. */ @@ -759,22 +754,20 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, return tape_34xx_erp_retry(request); case 0x55: /* Channel interface recovery (permanent). */ - PRINT_WARN("A permanent channel interface error occurred.\n"); + dev_warn (&device->cdev->dev, "A channel interface error cannot be" + " recovered\n"); return tape_34xx_erp_failed(request, -EIO); case 0x56: /* Channel protocol error. */ - PRINT_WARN("A channel protocol error occurred.\n"); + dev_warn (&device->cdev->dev, "A channel protocol error " + "occurred\n"); return tape_34xx_erp_failed(request, -EIO); case 0x57: if (device->cdev->id.driver_info == tape_3480) { /* Attention intercept. */ - PRINT_WARN("An attention intercept occurred, " - "which will be recovered.\n"); return tape_34xx_erp_retry(request); } else { /* Global status intercept. */ - PRINT_WARN("An global status intercept was received, " - "which will be recovered.\n"); return tape_34xx_erp_retry(request); } case 0x5a: @@ -782,42 +775,31 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, * Tape length incompatible. The tape inserted is too long, * which could cause damage to the tape or the drive. */ - PRINT_WARN("Tape Length Incompatible\n"); - PRINT_WARN("Tape length exceeds IBM enhanced capacity " - "cartdridge length or a medium\n"); - PRINT_WARN("with EC-CST identification mark has been mounted " - "in a device that writes\n"); - PRINT_WARN("3480 or 3480 XF format.\n"); + dev_warn (&device->cdev->dev, "The tape unit does not support " + "the tape length\n"); return tape_34xx_erp_failed(request, -EIO); case 0x5b: /* Format 3480 XF incompatible */ if (sense[1] & SENSE_BEGINNING_OF_TAPE) /* The tape will get overwritten. */ return tape_34xx_erp_retry(request); - PRINT_WARN("Format 3480 XF Incompatible\n"); - PRINT_WARN("Medium has been created in 3480 format. " - "To change the format writes\n"); - PRINT_WARN("must be issued at BOT.\n"); + dev_warn (&device->cdev->dev, "The tape unit does not support" + " format 3480 XF\n"); return tape_34xx_erp_failed(request, -EIO); case 0x5c: /* Format 3480-2 XF incompatible */ - PRINT_WARN("Format 3480-2 XF Incompatible\n"); - PRINT_WARN("Device can only read 3480 or 3480 XF format.\n"); + dev_warn (&device->cdev->dev, "The tape unit does not support tape " + "format 3480-2 XF\n"); return tape_34xx_erp_failed(request, -EIO); case 0x5d: /* Tape length violation. */ - PRINT_WARN("Tape Length Violation\n"); - PRINT_WARN("The mounted tape exceeds IBM Enhanced Capacity " - "Cartdridge System Tape length.\n"); - PRINT_WARN("This may cause damage to the drive or tape when " - "processing to the EOV\n"); + dev_warn (&device->cdev->dev, "The tape unit does not support" + " the current tape length\n"); return tape_34xx_erp_failed(request, -EMEDIUMTYPE); case 0x5e: /* Compaction algorithm incompatible. */ - PRINT_WARN("Compaction Algorithm Incompatible\n"); - PRINT_WARN("The volume is recorded using an incompatible " - "compaction algorithm,\n"); - PRINT_WARN("which is not supported by the device.\n"); + dev_warn (&device->cdev->dev, "The tape unit does not support" + " the compaction algorithm\n"); return tape_34xx_erp_failed(request, -EMEDIUMTYPE); /* The following erpas should have been covered earlier. */ @@ -848,7 +830,6 @@ tape_34xx_irq(struct tape_device *device, struct tape_request *request, (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) && (request->op == TO_WRI)) { /* Write at end of volume */ - PRINT_INFO("End of volume\n"); /* XXX */ return tape_34xx_erp_failed(request, -ENOSPC); } @@ -869,9 +850,7 @@ tape_34xx_irq(struct tape_device *device, struct tape_request *request, } DBF_EVENT(6, "xunknownirq\n"); - PRINT_ERR("Unexpected interrupt.\n"); - PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]); - tape_dump_sense(device, request, irb); + tape_dump_sense_dbf(device, request, irb); return TAPE_IO_STOP; } |