summaryrefslogtreecommitdiff
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/Kconfig25
-rw-r--r--drivers/regulator/Makefile4
-rw-r--r--drivers/regulator/arizona-ldo1.c27
-rw-r--r--drivers/regulator/bd71837-regulator.c44
-rw-r--r--drivers/regulator/bd9571mwv-regulator.c72
-rw-r--r--drivers/regulator/core.c44
-rw-r--r--drivers/regulator/cpcap-regulator.c103
-rw-r--r--drivers/regulator/max14577-regulator.c22
-rw-r--r--drivers/regulator/max77686-regulator.c32
-rw-r--r--drivers/regulator/max77693-regulator.c32
-rw-r--r--drivers/regulator/max77802-regulator.c34
-rw-r--r--drivers/regulator/max8997-regulator.c33
-rw-r--r--drivers/regulator/max8998.c28
-rw-r--r--drivers/regulator/pfuze100-regulator.c112
-rw-r--r--drivers/regulator/qcom-rpmh-regulator.c769
-rw-r--r--drivers/regulator/qcom_spmi-regulator.c38
-rw-r--r--drivers/regulator/s2mpa01.c14
-rw-r--r--drivers/regulator/s2mps11.c21
-rw-r--r--drivers/regulator/s5m8767.c16
-rw-r--r--drivers/regulator/tps65217-regulator.c2
-rw-r--r--drivers/regulator/uniphier-regulator.c213
21 files changed, 1435 insertions, 250 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5dbccf5f3037..329cdd33ed62 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -180,9 +180,9 @@ config REGULATOR_BCM590XX
BCM590xx PMUs. This will enable support for the software
controllable LDO/Switching regulators.
-config REGULATOR_BD71837
+config REGULATOR_BD718XX
tristate "ROHM BD71837 Power Regulator"
- depends on MFD_BD71837
+ depends on MFD_ROHM_BD718XX
help
This driver supports voltage regulators on ROHM BD71837 PMIC.
This will enable support for the software controllable buck
@@ -633,12 +633,12 @@ config REGULATOR_PCF50633
on PCF50633
config REGULATOR_PFUZE100
- tristate "Freescale PFUZE100/200/3000 regulator driver"
+ tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
depends on I2C
select REGMAP_I2C
help
Say y here to support the regulators found on the Freescale
- PFUZE100/200/3000 PMIC.
+ PFUZE100/200/3000/3001 PMIC.
config REGULATOR_PV88060
tristate "Powerventure Semiconductor PV88060 regulator"
@@ -682,6 +682,15 @@ config REGULATOR_QCOM_RPM
Qualcomm RPM as a module. The module will be named
"qcom_rpm-regulator".
+config REGULATOR_QCOM_RPMH
+ tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
+ depends on QCOM_RPMH || COMPILE_TEST
+ help
+ This driver supports control of PMIC regulators via the RPMh hardware
+ block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
+ control allows for voting on regulator state between multiple
+ processors within the SoC.
+
config REGULATOR_QCOM_SMD_RPM
tristate "Qualcomm SMD based RPM regulator driver"
depends on QCOM_SMD_RPM
@@ -950,6 +959,14 @@ config REGULATOR_TWL4030
This driver supports the voltage regulators provided by
this family of companion chips.
+config REGULATOR_UNIPHIER
+ tristate "UniPhier regulator driver"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && MFD_SYSCON
+ default ARCH_UNIPHIER
+ help
+ Support for regulators implemented on Socionext UniPhier SoCs.
+
config REGULATOR_VCTRL
tristate "Voltage controlled regulators"
depends on OF
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd818ceb7c72..801d9a34a203 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
-obj-$(CONFIG_REGULATOR_BD71837) += bd71837-regulator.o
+obj-$(CONFIG_REGULATOR_BD718XX) += bd71837-regulator.o
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
@@ -118,6 +119,7 @@ obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
+obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index f6d6a4ad9e8a..e976d073f28d 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -36,6 +36,8 @@ struct arizona_ldo1 {
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
+
+ struct gpio_desc *ena_gpiod;
};
static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
@@ -253,12 +255,17 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
}
}
- /* We assume that high output = regulator off */
- config.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, "wlf,ldoena",
- GPIOD_OUT_HIGH);
+ /* We assume that high output = regulator off
+ * Don't use devm, since we need to get against the parent device
+ * so clean up would happen at the wrong time
+ */
+ config.ena_gpiod = gpiod_get_optional(parent_dev, "wlf,ldoena",
+ GPIOD_OUT_LOW);
if (IS_ERR(config.ena_gpiod))
return PTR_ERR(config.ena_gpiod);
+ ldo1->ena_gpiod = config.ena_gpiod;
+
if (pdata->init_data)
config.init_data = pdata->init_data;
else
@@ -276,6 +283,9 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
of_node_put(config.of_node);
if (IS_ERR(ldo1->regulator)) {
+ if (config.ena_gpiod)
+ gpiod_put(config.ena_gpiod);
+
ret = PTR_ERR(ldo1->regulator);
dev_err(&pdev->dev, "Failed to register LDO1 supply: %d\n",
ret);
@@ -334,8 +344,19 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
return ret;
}
+static int arizona_ldo1_remove(struct platform_device *pdev)
+{
+ struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
+
+ if (ldo1->ena_gpiod)
+ gpiod_put(ldo1->ena_gpiod);
+
+ return 0;
+}
+
static struct platform_driver arizona_ldo1_driver = {
.probe = arizona_ldo1_probe,
+ .remove = arizona_ldo1_remove,
.driver = {
.name = "arizona-ldo1",
},
diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c
index 6eae4d0432a2..0f8ac8dec3e1 100644
--- a/drivers/regulator/bd71837-regulator.c
+++ b/drivers/regulator/bd71837-regulator.c
@@ -2,19 +2,18 @@
// Copyright (C) 2018 ROHM Semiconductors
// bd71837-regulator.c ROHM BD71837MWV regulator driver
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd718x7.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/mfd/bd71837.h>
#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
struct bd71837_pmic {
struct regulator_desc descs[BD71837_REGULATOR_CNT];
@@ -39,7 +38,7 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
int id = rdev->desc->id;
unsigned int ramp_value = BUCK_RAMPRATE_10P00MV;
- dev_dbg(&(pmic->pdev->dev), "Buck[%d] Set Ramp = %d\n", id + 1,
+ dev_dbg(&pmic->pdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1,
ramp_delay);
switch (ramp_delay) {
case 1 ... 1250:
@@ -73,14 +72,10 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
unsigned int sel)
{
- int ret;
-
- ret = regulator_is_enabled_regmap(rdev);
- if (!ret)
- ret = regulator_set_voltage_sel_regmap(rdev, sel);
- else if (ret == 1)
- ret = -EBUSY;
- return ret;
+ if (regulator_is_enabled_regmap(rdev))
+ return -EBUSY;
+
+ return regulator_set_voltage_sel_regmap(rdev, sel);
}
static struct regulator_ops bd71837_ldo_regulator_ops = {
@@ -195,7 +190,7 @@ static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {
* LDO2
* 0.8 or 0.9V
*/
-const unsigned int ldo_2_volts[] = {
+static const unsigned int ldo_2_volts[] = {
900000, 800000
};
@@ -495,7 +490,6 @@ struct reg_init {
static int bd71837_probe(struct platform_device *pdev)
{
struct bd71837_pmic *pmic;
- struct bd71837_board *pdata;
struct regulator_config config = { 0 };
struct reg_init pmic_regulator_inits[] = {
{
@@ -548,8 +542,7 @@ static int bd71837_probe(struct platform_device *pdev)
int i, err;
- pmic = devm_kzalloc(&pdev->dev, sizeof(struct bd71837_pmic),
- GFP_KERNEL);
+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
return -ENOMEM;
@@ -564,7 +557,6 @@ static int bd71837_probe(struct platform_device *pdev)
goto err;
}
platform_set_drvdata(pdev, pmic);
- pdata = dev_get_platdata(pmic->mfd->dev);
/* Register LOCK release */
err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK,
@@ -573,8 +565,8 @@ static int bd71837_probe(struct platform_device *pdev)
dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err);
goto err;
} else {
- dev_dbg(&pmic->pdev->dev, "%s: Unlocked lock register 0x%x\n",
- __func__, BD71837_REG_REGLOCK);
+ dev_dbg(&pmic->pdev->dev, "Unlocked lock register 0x%x\n",
+ BD71837_REG_REGLOCK);
}
for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) {
@@ -584,9 +576,6 @@ static int bd71837_probe(struct platform_device *pdev)
desc = &pmic->descs[i];
- if (pdata)
- config.init_data = pdata->init_data[i];
-
config.dev = pdev->dev.parent;
config.driver_data = pmic;
config.regmap = pmic->mfd->regmap;
@@ -619,8 +608,6 @@ static int bd71837_probe(struct platform_device *pdev)
pmic->rdev[i] = rdev;
}
- return 0;
-
err:
return err;
}
@@ -628,7 +615,6 @@ err:
static struct platform_driver bd71837_regulator = {
.driver = {
.name = "bd71837-pmic",
- .owner = THIS_MODULE,
},
.probe = bd71837_probe,
};
diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
index be574eb444eb..274c5ed7cd73 100644
--- a/drivers/regulator/bd9571mwv-regulator.c
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -30,6 +30,7 @@ struct bd9571mwv_reg {
/* DDR Backup Power */
u8 bkup_mode_cnt_keepon; /* from "rohm,ddr-backup-power" */
u8 bkup_mode_cnt_saved;
+ bool bkup_mode_enabled;
/* Power switch type */
bool rstbmode_level;
@@ -171,13 +172,60 @@ static int bd9571mwv_bkup_mode_write(struct bd9571mwv *bd, unsigned int mode)
return 0;
}
+static ssize_t backup_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off");
+}
+
+static ssize_t backup_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+ unsigned int mode;
+ int ret;
+
+ if (!count)
+ return 0;
+
+ ret = kstrtobool(buf, &bdreg->bkup_mode_enabled);
+ if (ret)
+ return ret;
+
+ if (!bdreg->rstbmode_level)
+ return count;
+
+ /*
+ * Configure DDR Backup Mode, to change the role of the accessory power
+ * switch from a power switch to a wake-up switch, or vice versa
+ */
+ ret = bd9571mwv_bkup_mode_read(bdreg->bd, &mode);
+ if (ret)
+ return ret;
+
+ mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK;
+ if (bdreg->bkup_mode_enabled)
+ mode |= bdreg->bkup_mode_cnt_keepon;
+
+ ret = bd9571mwv_bkup_mode_write(bdreg->bd, mode);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(backup_mode);
+
static int bd9571mwv_suspend(struct device *dev)
{
struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
unsigned int mode;
int ret;
- if (!device_may_wakeup(dev))
+ if (!bdreg->bkup_mode_enabled)
return 0;
/* Save DDR Backup Mode */
@@ -204,7 +252,7 @@ static int bd9571mwv_resume(struct device *dev)
{
struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
- if (!device_may_wakeup(dev))
+ if (!bdreg->bkup_mode_enabled)
return 0;
/* Restore DDR Backup Mode */
@@ -215,9 +263,15 @@ static const struct dev_pm_ops bd9571mwv_pm = {
SET_SYSTEM_SLEEP_PM_OPS(bd9571mwv_suspend, bd9571mwv_resume)
};
+static int bd9571mwv_regulator_remove(struct platform_device *pdev)
+{
+ device_remove_file(&pdev->dev, &dev_attr_backup_mode);
+ return 0;
+}
#define DEV_PM_OPS &bd9571mwv_pm
#else
#define DEV_PM_OPS NULL
+#define bd9571mwv_regulator_remove NULL
#endif /* CONFIG_PM_SLEEP */
static int bd9571mwv_regulator_probe(struct platform_device *pdev)
@@ -270,14 +324,21 @@ static int bd9571mwv_regulator_probe(struct platform_device *pdev)
return -EINVAL;
}
+#ifdef CONFIG_PM_SLEEP
if (bdreg->bkup_mode_cnt_keepon) {
- device_set_wakeup_capable(&pdev->dev, true);
+ int ret;
+
/*
- * Wakeup is enabled by default in pulse mode, but needs
+ * Backup mode is enabled by default in pulse mode, but needs
* explicit user setup in level mode.
*/
- device_set_wakeup_enable(&pdev->dev, bdreg->rstbmode_pulse);
+ bdreg->bkup_mode_enabled = bdreg->rstbmode_pulse;
+
+ ret = device_create_file(&pdev->dev, &dev_attr_backup_mode);
+ if (ret)
+ return ret;
}
+#endif /* CONFIG_PM_SLEEP */
return 0;
}
@@ -294,6 +355,7 @@ static struct platform_driver bd9571mwv_regulator_driver = {
.pm = DEV_PM_OPS,
},
.probe = bd9571mwv_regulator_probe,
+ .remove = bd9571mwv_regulator_remove,
.id_table = bd9571mwv_regulator_id_table,
};
module_platform_driver(bd9571mwv_regulator_driver);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 6ed568b96c0e..bb1324f93143 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1740,6 +1740,8 @@ struct regulator *_regulator_get(struct device *dev, const char *id,
rdev->use_count = 0;
}
+ device_link_add(dev, &rdev->dev, DL_FLAG_STATELESS);
+
return regulator;
}
@@ -1829,9 +1831,21 @@ static void _regulator_put(struct regulator *regulator)
debugfs_remove_recursive(regulator->debugfs);
- /* remove any sysfs entries */
- if (regulator->dev)
+ if (regulator->dev) {
+ int count = 0;
+ struct regulator *r;
+
+ list_for_each_entry(r, &rdev->consumer_list, list)
+ if (r->dev == regulator->dev)
+ count++;
+
+ if (count == 1)
+ device_link_remove(regulator->dev, &rdev->dev);
+
+ /* remove any sysfs entries */
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
+ }
+
regulator_lock(rdev);
list_del(&regulator->list);
@@ -4441,7 +4455,7 @@ void regulator_unregister(struct regulator_dev *rdev)
EXPORT_SYMBOL_GPL(regulator_unregister);
#ifdef CONFIG_SUSPEND
-static int _regulator_suspend_late(struct device *dev, void *data)
+static int _regulator_suspend(struct device *dev, void *data)
{
struct regulator_dev *rdev = dev_to_rdev(dev);
suspend_state_t *state = data;
@@ -4455,20 +4469,20 @@ static int _regulator_suspend_late(struct device *dev, void *data)
}
/**
- * regulator_suspend_late - prepare regulators for system wide suspend
+ * regulator_suspend - prepare regulators for system wide suspend
* @state: system suspend state
*
* Configure each regulator with it's suspend operating parameters for state.
*/
-static int regulator_suspend_late(struct device *dev)
+static int regulator_suspend(struct device *dev)
{
suspend_state_t state = pm_suspend_target_state;
return class_for_each_device(&regulator_class, NULL, &state,
- _regulator_suspend_late);
+ _regulator_suspend);
}
-static int _regulator_resume_early(struct device *dev, void *data)
+static int _regulator_resume(struct device *dev, void *data)
{
int ret = 0;
struct regulator_dev *rdev = dev_to_rdev(dev);
@@ -4481,35 +4495,35 @@ static int _regulator_resume_early(struct device *dev, void *data)
regulator_lock(rdev);
- if (rdev->desc->ops->resume_early &&
+ if (rdev->desc->ops->resume &&
(rstate->enabled == ENABLE_IN_SUSPEND ||
rstate->enabled == DISABLE_IN_SUSPEND))
- ret = rdev->desc->ops->resume_early(rdev);
+ ret = rdev->desc->ops->resume(rdev);
regulator_unlock(rdev);
return ret;
}
-static int regulator_resume_early(struct device *dev)
+static int regulator_resume(struct device *dev)
{
suspend_state_t state = pm_suspend_target_state;
return class_for_each_device(&regulator_class, NULL, &state,
- _regulator_resume_early);
+ _regulator_resume);
}
#else /* !CONFIG_SUSPEND */
-#define regulator_suspend_late NULL
-#define regulator_resume_early NULL
+#define regulator_suspend NULL
+#define regulator_resume NULL
#endif /* !CONFIG_SUSPEND */
#ifdef CONFIG_PM
static const struct dev_pm_ops __maybe_unused regulator_pm_ops = {
- .suspend_late = regulator_suspend_late,
- .resume_early = regulator_resume_early,
+ .suspend = regulator_suspend,
+ .resume = regulator_resume,
};
#endif
diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c
index bd910fe123d9..2131457937b7 100644
--- a/drivers/regulator/cpcap-regulator.c
+++ b/drivers/regulator/cpcap-regulator.c
@@ -271,6 +271,29 @@ static struct regulator_ops cpcap_regulator_ops = {
};
static const unsigned int unknown_val_tbl[] = { 0, };
+static const unsigned int sw2_sw4_val_tbl[] = { 612500, 625000, 637500,
+ 650000, 662500, 675000,
+ 687500, 700000, 712500,
+ 725000, 737500, 750000,
+ 762500, 775000, 787500,
+ 800000, 812500, 825000,
+ 837500, 850000, 862500,
+ 875000, 887500, 900000,
+ 912500, 925000, 937500,
+ 950000, 962500, 975000,
+ 987500, 1000000, 1012500,
+ 1025000, 1037500, 1050000,
+ 1062500, 1075000, 1087500,
+ 1100000, 1112500, 1125000,
+ 1137500, 1150000, 1162500,
+ 1175000, 1187500, 1200000,
+ 1212500, 1225000, 1237500,
+ 1250000, 1262500, 1275000,
+ 1287500, 1300000, 1312500,
+ 1325000, 1337500, 1350000,
+ 1362500, 1375000, 1387500,
+ 1400000, 1412500, 1425000,
+ 1437500, 1450000, 1462500, };
static const unsigned int sw5_val_tbl[] = { 0, 5050000, };
static const unsigned int vcam_val_tbl[] = { 2600000, 2700000, 2800000,
2900000, };
@@ -389,6 +412,82 @@ static struct cpcap_regulator omap4_regulators[] = {
{ /* sentinel */ },
};
+static struct cpcap_regulator xoom_regulators[] = {
+ CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW1_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW2_SEL, sw2_sw4_val_tbl,
+ 0xf00, 0x7f, 0, 0x800, 0, 120),
+ CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW3_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW4_SEL, sw2_sw4_val_tbl,
+ 0xf00, 0x7f, 0, 0x900, 0, 100),
+ CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW5_SEL, sw5_val_tbl,
+ 0x2a, 0, 0, 0x22, 0, 0),
+ CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW6_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
+ 0x87, 0x30, 4, 0x7, 0, 420),
+ CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
+ 0x47, 0x10, 4, 0x7, 0, 350),
+ CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
+ 0x87, 0x30, 4, 0x3, 0, 420),
+ CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
+ 0x87, 0x30, 4, 0x5, 0, 420),
+ CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
+ 0x80, 0xf, 0, 0x80, 0, 420),
+ CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
+ 0x17, 0, 0, 0x2, 0, 0),
+ CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
+ 0x87, 0x38, 3, 0x2, 0, 420),
+ CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
+ 0x43, 0x18, 3, 0x1, 0, 420),
+ CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
+ 0xac, 0x2, 1, 0xc, 0, 10),
+ CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
+ 0x23, 0x8, 3, 0x3, 0, 10),
+ CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
+ 0x23, 0x8, 3, 0x3, 0, 420),
+ CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
+ 0x47, 0x10, 4, 0x5, 0, 420),
+ CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
+ 0x20c, 0xc0, 6, 0x8, 0, 420),
+ CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+ 0xffff, vsim_val_tbl,
+ 0x23, 0x8, 3, 0x3, 0, 420),
+ CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+ 0xffff, vsimcard_val_tbl,
+ 0x1e80, 0x8, 3, 0x1e00, 0, 420),
+ CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
+ 0x1, 0xc, 2, 0, 0x1, 500),
+ CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
+ 0x11c, 0x40, 6, 0xc, 0, 0),
+ CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
+ CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
+ 0x16, 0x1, 0, 0x4, 0, 0),
+ { /* sentinel */ },
+};
+
static const struct of_device_id cpcap_regulator_id_table[] = {
{
.compatible = "motorola,cpcap-regulator",
@@ -397,6 +496,10 @@ static const struct of_device_id cpcap_regulator_id_table[] = {
.compatible = "motorola,mapphone-cpcap-regulator",
.data = omap4_regulators,
},
+ {
+ .compatible = "motorola,xoom-cpcap-regulator",
+ .data = xoom_regulators,
+ },
{},
};
MODULE_DEVICE_TABLE(of, cpcap_regulator_id_table);
diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c
index 0db288ce319c..bc7f4751bf9c 100644
--- a/drivers/regulator/max14577-regulator.c
+++ b/drivers/regulator/max14577-regulator.c
@@ -1,19 +1,9 @@
-/*
- * max14577.c - Regulator driver for the Maxim 14577/77836
- *
- * Copyright (C) 2013,2014 Samsung Electronics
- * Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max14577.c - Regulator driver for the Maxim 14577/77836
+//
+// Copyright (C) 2013,2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
#include <linux/module.h>
#include <linux/platform_device.h>
diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c
index c301f3733475..bee060937f56 100644
--- a/drivers/regulator/max77686-regulator.c
+++ b/drivers/regulator/max77686-regulator.c
@@ -1,26 +1,12 @@
-/*
- * max77686.c - Regulator driver for the Maxim 77686
- *
- * Copyright (C) 2012 Samsung Electronics
- * Chiwoong Byun <woong.byun@samsung.com>
- * Jonghwa Lee <jonghwa3.lee@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * This driver is based on max8997.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77686.c - Regulator driver for the Maxim 77686
+//
+// Copyright (C) 2012 Samsung Electronics
+// Chiwoong Byun <woong.byun@samsung.com>
+// Jonghwa Lee <jonghwa3.lee@samsung.com>
+//
+// This driver is based on max8997.c
#include <linux/kernel.h>
#include <linux/bug.h>
diff --git a/drivers/regulator/max77693-regulator.c b/drivers/regulator/max77693-regulator.c
index e7000e777292..077ecbbfdf76 100644
--- a/drivers/regulator/max77693-regulator.c
+++ b/drivers/regulator/max77693-regulator.c
@@ -1,26 +1,12 @@
-/*
- * max77693.c - Regulator driver for the Maxim 77693 and 77843
- *
- * Copyright (C) 2013-2015 Samsung Electronics
- * Jonghwa Lee <jonghwa3.lee@samsung.com>
- * Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * This driver is based on max77686.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77693.c - Regulator driver for the Maxim 77693 and 77843
+//
+// Copyright (C) 2013-2015 Samsung Electronics
+// Jonghwa Lee <jonghwa3.lee@samsung.com>
+// Krzysztof Kozlowski <krzk@kernel.org>
+//
+// This driver is based on max77686.c
#include <linux/err.h>
#include <linux/slab.h>
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index b6261903818c..c30cf5c9f2de 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -1,25 +1,15 @@
-/*
- * max77802.c - Regulator driver for the Maxim 77802
- *
- * Copyright (C) 2013-2014 Google, Inc
- * Simon Glass <sjg@chromium.org>
- *
- * Copyright (C) 2012 Samsung Electronics
- * Chiwoong Byun <woong.byun@samsung.com>
- * Jonghwa Lee <jonghwa3.lee@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * This driver is based on max8997.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77802.c - Regulator driver for the Maxim 77802
+//
+// Copyright (C) 2013-2014 Google, Inc
+// Simon Glass <sjg@chromium.org>
+//
+// Copyright (C) 2012 Samsung Electronics
+// Chiwoong Byun <woong.byun@samsung.com>
+// Jonghwa Lee <jonghwa3.lee@samsung.com>
+//
+// This driver is based on max8997.c
#include <linux/kernel.h>
#include <linux/bug.h>
diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c
index a8ea30ee18a6..ad0c806b0737 100644
--- a/drivers/regulator/max8997-regulator.c
+++ b/drivers/regulator/max8997-regulator.c
@@ -1,25 +1,11 @@
-/*
- * max8997.c - Regulator driver for the Maxim 8997/8966
- *
- * Copyright (C) 2011 Samsung Electronics
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * This driver is based on max8998.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8997.c - Regulator driver for the Maxim 8997/8966
+//
+// Copyright (C) 2011 Samsung Electronics
+// MyungJoo Ham <myungjoo.ham@samsung.com>
+//
+// This driver is based on max8998.c
#include <linux/bug.h>
#include <linux/err.h>
@@ -165,8 +151,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev,
int rid = rdev_get_id(rdev);
int val;
- if (rid >= ARRAY_SIZE(reg_voltage_map) ||
- rid < 0)
+ if (rid < 0 || rid >= ARRAY_SIZE(reg_voltage_map))
return -EINVAL;
desc = reg_voltage_map[rid];
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 6b9f262ebbb0..271bb736f3f5 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -1,24 +1,10 @@
-/*
- * max8998.c - Voltage regulator driver for the Maxim 8998
- *
- * Copyright (C) 2009-2010 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- * Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8998.c - Voltage regulator driver for the Maxim 8998
+//
+// Copyright (C) 2009-2010 Samsung Electronics
+// Kyungmin Park <kyungmin.park@samsung.com>
+// Marek Szyprowski <m.szyprowski@samsung.com>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 8d9dbcc775ea..31c3a236120a 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -17,6 +17,8 @@
#include <linux/slab.h>
#include <linux/regmap.h>
+#define PFUZE_FLAG_DISABLE_SW BIT(1)
+
#define PFUZE_NUMREGS 128
#define PFUZE100_VOL_OFFSET 0
#define PFUZE100_STANDBY_OFFSET 1
@@ -44,16 +46,18 @@
#define PFUZE100_VGEN5VOL 0x70
#define PFUZE100_VGEN6VOL 0x71
-enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
+enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, };
struct pfuze_regulator {
struct regulator_desc desc;
unsigned char stby_reg;
unsigned char stby_mask;
+ bool sw_reg;
};
struct pfuze_chip {
int chip_id;
+ int flags;
struct regmap *regmap;
struct device *dev;
struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
@@ -92,6 +96,7 @@ static const struct i2c_device_id pfuze_device_id[] = {
{.name = "pfuze100", .driver_data = PFUZE100},
{.name = "pfuze200", .driver_data = PFUZE200},
{.name = "pfuze3000", .driver_data = PFUZE3000},
+ {.name = "pfuze3001", .driver_data = PFUZE3001},
{ }
};
MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
@@ -100,6 +105,7 @@ static const struct of_device_id pfuze_dt_ids[] = {
{ .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
{ .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
{ .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000},
+ { .compatible = "fsl,pfuze3001", .data = (void *)PFUZE3001},
{ }
};
MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
@@ -108,10 +114,28 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
+ bool reg_has_ramp_delay;
unsigned int ramp_bits;
int ret;
- if (id < PFUZE100_SWBST) {
+ switch (pfuze100->chip_id) {
+ case PFUZE3001:
+ /* no dynamic voltage scaling for PF3001 */
+ reg_has_ramp_delay = false;
+ break;
+ case PFUZE3000:
+ reg_has_ramp_delay = (id < PFUZE3000_SWBST);
+ break;
+ case PFUZE200:
+ reg_has_ramp_delay = (id < PFUZE200_SWBST);
+ break;
+ case PFUZE100:
+ default:
+ reg_has_ramp_delay = (id < PFUZE100_SWBST);
+ break;
+ }
+
+ if (reg_has_ramp_delay) {
ramp_delay = 12500 / ramp_delay;
ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
ret = regmap_update_bits(pfuze100->regmap,
@@ -119,8 +143,9 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
0xc0, ramp_bits << 6);
if (ret < 0)
dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
- } else
+ } else {
ret = -EACCES;
+ }
return ret;
}
@@ -142,6 +167,14 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
};
static const struct regulator_ops pfuze100_sw_regulator_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = pfuze100_set_ramp_delay,
+};
+
+static const struct regulator_ops pfuze100_sw_disable_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -192,13 +225,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0x3f, \
.enable_reg = (base) + PFUZE100_MODE_OFFSET, \
- .enable_val = 0xc, \
- .disable_val = 0x0, \
.enable_mask = 0xf, \
- .enable_time = 500, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0x3f, \
+ .sw_reg = true, \
}
#define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \
@@ -361,6 +392,19 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
+static struct pfuze_regulator pfuze3001_regulators[] = {
+ PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+ PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+ PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
+ PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
+ PFUZE3000_VCC_REG(PFUZE3001, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
+ PFUZE3000_VCC_REG(PFUZE3001, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+};
+
#ifdef CONFIG_OF
/* PFUZE100 */
static struct of_regulator_match pfuze100_matches[] = {
@@ -418,6 +462,21 @@ static struct of_regulator_match pfuze3000_matches[] = {
{ .name = "vldo4", },
};
+/* PFUZE3001 */
+static struct of_regulator_match pfuze3001_matches[] = {
+
+ { .name = "sw1", },
+ { .name = "sw2", },
+ { .name = "sw3", },
+ { .name = "vsnvs", },
+ { .name = "vldo1", },
+ { .name = "vldo2", },
+ { .name = "vccsd", },
+ { .name = "v33", },
+ { .name = "vldo3", },
+ { .name = "vldo4", },
+};
+
static struct of_regulator_match *pfuze_matches;
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
@@ -430,6 +489,9 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
if (!np)
return -EINVAL;
+ if (of_property_read_bool(np, "fsl,pfuze-support-disable-sw"))
+ chip->flags |= PFUZE_FLAG_DISABLE_SW;
+
parent = of_get_child_by_name(np, "regulators");
if (!parent) {
dev_err(dev, "regulators node not found\n");
@@ -437,6 +499,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
}
switch (chip->chip_id) {
+ case PFUZE3001:
+ pfuze_matches = pfuze3001_matches;
+ ret = of_regulator_match(dev, parent, pfuze3001_matches,
+ ARRAY_SIZE(pfuze3001_matches));
+ break;
case PFUZE3000:
pfuze_matches = pfuze3000_matches;
ret = of_regulator_match(dev, parent, pfuze3000_matches,
@@ -508,7 +575,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
*/
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
} else if ((value & 0x0f) != pfuze_chip->chip_id &&
- (value & 0xf0) >> 4 != pfuze_chip->chip_id) {
+ (value & 0xf0) >> 4 != pfuze_chip->chip_id &&
+ (value != pfuze_chip->chip_id)) {
/* device id NOT match with your setting */
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
@@ -588,6 +656,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
/* use the right regulators after identify the right device */
switch (pfuze_chip->chip_id) {
+ case PFUZE3001:
+ pfuze_chip->pfuze_regulators = pfuze3001_regulators;
+ regulator_num = ARRAY_SIZE(pfuze3001_regulators);
+ sw_check_start = PFUZE3001_SW2;
+ sw_check_end = PFUZE3001_SW2;
+ sw_hi = 1 << 3;
+ break;
case PFUZE3000:
pfuze_chip->pfuze_regulators = pfuze3000_regulators;
regulator_num = ARRAY_SIZE(pfuze3000_regulators);
@@ -611,7 +686,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
}
dev_info(&client->dev, "pfuze%s found.\n",
(pfuze_chip->chip_id == PFUZE100) ? "100" :
- ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
+ (((pfuze_chip->chip_id == PFUZE200) ? "200" :
+ ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001"))));
memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
sizeof(pfuze_chip->regulator_descs));
@@ -636,7 +712,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
if (i >= sw_check_start && i <= sw_check_end) {
regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
if (val & sw_hi) {
- if (pfuze_chip->chip_id == PFUZE3000) {
+ if (pfuze_chip->chip_id == PFUZE3000 ||
+ pfuze_chip->chip_id == PFUZE3001) {
desc->volt_table = pfuze3000_sw2hi;
desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi);
} else {
@@ -647,6 +724,21 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
}
}
+ /*
+ * Allow SW regulators to turn off. Checking it trough a flag is
+ * a workaround to keep the backward compatibility with existing
+ * old dtb's which may relay on the fact that we didn't disable
+ * the switched regulator till yet.
+ */
+ if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) {
+ if (pfuze_chip->regulator_descs[i].sw_reg) {
+ desc->ops = &pfuze100_sw_disable_regulator_ops;
+ desc->enable_val = 0x8;
+ desc->disable_val = 0x0;
+ desc->enable_time = 500;
+ }
+ }
+
config.dev = &client->dev;
config.init_data = init_data;
config.driver_data = pfuze_chip;
@@ -675,5 +767,5 @@ static struct i2c_driver pfuze_driver = {
module_i2c_driver(pfuze_driver);
MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
-MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000/3001 PMIC");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
new file mode 100644
index 000000000000..9f27daebd8c8
--- /dev/null
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -0,0 +1,769 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/**
+ * enum rpmh_regulator_type - supported RPMh accelerator types
+ * %VRM: RPMh VRM accelerator which supports voting on enable, voltage,
+ * and mode of LDO, SMPS, and BOB type PMIC regulators.
+ * %XOB: RPMh XOB accelerator which supports voting on the enable state
+ * of PMIC regulators.
+ */
+enum rpmh_regulator_type {
+ VRM,
+ XOB,
+};
+
+#define RPMH_REGULATOR_REG_VRM_VOLTAGE 0x0
+#define RPMH_REGULATOR_REG_ENABLE 0x4
+#define RPMH_REGULATOR_REG_VRM_MODE 0x8
+
+#define PMIC4_LDO_MODE_RETENTION 4
+#define PMIC4_LDO_MODE_LPM 5
+#define PMIC4_LDO_MODE_HPM 7
+
+#define PMIC4_SMPS_MODE_RETENTION 4
+#define PMIC4_SMPS_MODE_PFM 5
+#define PMIC4_SMPS_MODE_AUTO 6
+#define PMIC4_SMPS_MODE_PWM 7
+
+#define PMIC4_BOB_MODE_PASS 0
+#define PMIC4_BOB_MODE_PFM 1
+#define PMIC4_BOB_MODE_AUTO 2
+#define PMIC4_BOB_MODE_PWM 3
+
+/**
+ * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
+ * @regulator_type: RPMh accelerator type used to manage this
+ * regulator
+ * @ops: Pointer to regulator ops callback structure
+ * @voltage_range: The single range of voltages supported by this
+ * PMIC regulator type
+ * @n_voltages: The number of unique voltage set points defined
+ * by voltage_range
+ * @hpm_min_load_uA: Minimum load current in microamps that requires
+ * high power mode (HPM) operation. This is used
+ * for LDO hardware type regulators only.
+ * @pmic_mode_map: Array indexed by regulator framework mode
+ * containing PMIC hardware modes. Must be large
+ * enough to index all framework modes supported
+ * by this regulator hardware type.
+ * @of_map_mode: Maps an RPMH_REGULATOR_MODE_* mode value defined
+ * in device tree to a regulator framework mode
+ */
+struct rpmh_vreg_hw_data {
+ enum rpmh_regulator_type regulator_type;
+ const struct regulator_ops *ops;
+ const struct regulator_linear_range voltage_range;
+ int n_voltages;
+ int hpm_min_load_uA;
+ const int *pmic_mode_map;
+ unsigned int (*of_map_mode)(unsigned int mode);
+};
+
+/**
+ * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a
+ * single regulator device
+ * @dev: Device pointer for the top-level PMIC RPMh
+ * regulator parent device. This is used as a
+ * handle in RPMh write requests.
+ * @addr: Base address of the regulator resource within
+ * an RPMh accelerator
+ * @rdesc: Regulator descriptor
+ * @hw_data: PMIC regulator configuration data for this RPMh
+ * regulator
+ * @always_wait_for_ack: Boolean flag indicating if a request must always
+ * wait for an ACK from RPMh before continuing even
+ * if it corresponds to a strictly lower power
+ * state (e.g. enabled --> disabled).
+ * @enabled: Flag indicating if the regulator is enabled or
+ * not
+ * @bypassed: Boolean indicating if the regulator is in
+ * bypass (pass-through) mode or not. This is
+ * only used by BOB rpmh-regulator resources.
+ * @voltage_selector: Selector used for get_voltage_sel() and
+ * set_voltage_sel() callbacks
+ * @mode: RPMh VRM regulator current framework mode
+ */
+struct rpmh_vreg {
+ struct device *dev;
+ u32 addr;
+ struct regulator_desc rdesc;
+ const struct rpmh_vreg_hw_data *hw_data;
+ bool always_wait_for_ack;
+
+ int enabled;
+ bool bypassed;
+ int voltage_selector;
+ unsigned int mode;
+};
+
+/**
+ * struct rpmh_vreg_init_data - initialization data for an RPMh regulator
+ * @name: Name for the regulator which also corresponds
+ * to the device tree subnode name of the regulator
+ * @resource_name: RPMh regulator resource name format string.
+ * This must include exactly one field: '%s' which
+ * is filled at run-time with the PMIC ID provided
+ * by device tree property qcom,pmic-id. Example:
+ * "ldo%s1" for RPMh resource "ldoa1".
+ * @supply_name: Parent supply regulator name
+ * @hw_data: Configuration data for this PMIC regulator type
+ */
+struct rpmh_vreg_init_data {
+ const char *name;
+ const char *resource_name;
+ const char *supply_name;
+ const struct rpmh_vreg_hw_data *hw_data;
+};
+
+/**
+ * rpmh_regulator_send_request() - send the request to RPMh
+ * @vreg: Pointer to the RPMh regulator
+ * @cmd: Pointer to the RPMh command to send
+ * @wait_for_ack: Boolean indicating if execution must wait until the
+ * request has been acknowledged as complete
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_send_request(struct rpmh_vreg *vreg,
+ struct tcs_cmd *cmd, bool wait_for_ack)
+{
+ int ret;
+
+ if (wait_for_ack || vreg->always_wait_for_ack)
+ ret = rpmh_write(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, 1);
+ else
+ ret = rpmh_write_async(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd,
+ 1);
+
+ return ret;
+}
+
+static int _rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector, bool wait_for_ack)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE,
+ };
+ int ret;
+
+ /* VRM voltage control register is set with voltage in millivolts. */
+ cmd.data = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev,
+ selector), 1000);
+
+ ret = rpmh_regulator_send_request(vreg, &cmd, wait_for_ack);
+ if (!ret)
+ vreg->voltage_selector = selector;
+
+ return ret;
+}
+
+static int rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ if (vreg->enabled == -EINVAL) {
+ /*
+ * Cache the voltage and send it later when the regulator is
+ * enabled or disabled.
+ */
+ vreg->voltage_selector = selector;
+ return 0;
+ }
+
+ return _rpmh_regulator_vrm_set_voltage_sel(rdev, selector,
+ selector > vreg->voltage_selector);
+}
+
+static int rpmh_regulator_vrm_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->voltage_selector;
+}
+
+static int rpmh_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->enabled;
+}
+
+static int rpmh_regulator_set_enable_state(struct regulator_dev *rdev,
+ bool enable)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+ .data = enable,
+ };
+ int ret;
+
+ if (vreg->enabled == -EINVAL &&
+ vreg->voltage_selector != -ENOTRECOVERABLE) {
+ ret = _rpmh_regulator_vrm_set_voltage_sel(rdev,
+ vreg->voltage_selector, true);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = rpmh_regulator_send_request(vreg, &cmd, enable);
+ if (!ret)
+ vreg->enabled = enable;
+
+ return ret;
+}
+
+static int rpmh_regulator_enable(struct regulator_dev *rdev)
+{
+ return rpmh_regulator_set_enable_state(rdev, true);
+}
+
+static int rpmh_regulator_disable(struct regulator_dev *rdev)
+{
+ return rpmh_regulator_set_enable_state(rdev, false);
+}
+
+static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
+ unsigned int mode, bool bypassed)
+{
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE,
+ };
+ int pmic_mode;
+
+ if (mode > REGULATOR_MODE_STANDBY)
+ return -EINVAL;
+
+ pmic_mode = vreg->hw_data->pmic_mode_map[mode];
+ if (pmic_mode < 0)
+ return pmic_mode;
+
+ if (bypassed)
+ cmd.data = PMIC4_BOB_MODE_PASS;
+ else
+ cmd.data = pmic_mode;
+
+ return rpmh_regulator_send_request(vreg, &cmd, true);
+}
+
+static int rpmh_regulator_vrm_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (mode == vreg->mode)
+ return 0;
+
+ ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed);
+ if (!ret)
+ vreg->mode = mode;
+
+ return ret;
+}
+
+static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->mode;
+}
+
+/**
+ * rpmh_regulator_vrm_set_load() - set the regulator mode based upon the load
+ * current requested
+ * @rdev: Regulator device pointer for the rpmh-regulator
+ * @load_uA: Aggregated load current in microamps
+ *
+ * This function is used in the regulator_ops for VRM type RPMh regulator
+ * devices.
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ unsigned int mode;
+
+ if (load_uA >= vreg->hw_data->hpm_min_load_uA)
+ mode = REGULATOR_MODE_NORMAL;
+ else
+ mode = REGULATOR_MODE_IDLE;
+
+ return rpmh_regulator_vrm_set_mode(rdev, mode);
+}
+
+static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev,
+ bool enable)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (vreg->bypassed == enable)
+ return 0;
+
+ ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, enable);
+ if (!ret)
+ vreg->bypassed = enable;
+
+ return ret;
+}
+
+static int rpmh_regulator_vrm_get_bypass(struct regulator_dev *rdev,
+ bool *enable)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ *enable = vreg->bypassed;
+
+ return 0;
+}
+
+static const struct regulator_ops rpmh_regulator_vrm_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+ .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
+ .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_mode = rpmh_regulator_vrm_set_mode,
+ .get_mode = rpmh_regulator_vrm_get_mode,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_drms_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+ .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
+ .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_mode = rpmh_regulator_vrm_set_mode,
+ .get_mode = rpmh_regulator_vrm_get_mode,
+ .set_load = rpmh_regulator_vrm_set_load,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+ .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
+ .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_mode = rpmh_regulator_vrm_set_mode,
+ .get_mode = rpmh_regulator_vrm_get_mode,
+ .set_bypass = rpmh_regulator_vrm_set_bypass,
+ .get_bypass = rpmh_regulator_vrm_get_bypass,
+};
+
+static const struct regulator_ops rpmh_regulator_xob_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+};
+
+/**
+ * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator
+ * vreg: Pointer to the individual rpmh-regulator resource
+ * dev: Pointer to the top level rpmh-regulator PMIC device
+ * node: Pointer to the individual rpmh-regulator resource
+ * device node
+ * pmic_id: String used to identify the top level rpmh-regulator
+ * PMIC device on the board
+ * pmic_rpmh_data: Pointer to a null-terminated array of rpmh-regulator
+ * resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
+ struct device_node *node, const char *pmic_id,
+ const struct rpmh_vreg_init_data *pmic_rpmh_data)
+{
+ struct regulator_config reg_config = {};
+ char rpmh_resource_name[20] = "";
+ const struct rpmh_vreg_init_data *rpmh_data;
+ struct regulator_init_data *init_data;
+ struct regulator_dev *rdev;
+ int ret;
+
+ vreg->dev = dev;
+
+ for (rpmh_data = pmic_rpmh_data; rpmh_data->name; rpmh_data++)
+ if (!strcmp(rpmh_data->name, node->name))
+ break;
+
+ if (!rpmh_data->name) {
+ dev_err(dev, "Unknown regulator %s\n", node->name);
+ return -EINVAL;
+ }
+
+ scnprintf(rpmh_resource_name, sizeof(rpmh_resource_name),
+ rpmh_data->resource_name, pmic_id);
+
+ vreg->addr = cmd_db_read_addr(rpmh_resource_name);
+ if (!vreg->addr) {
+ dev_err(dev, "%s: could not find RPMh address for resource %s\n",
+ node->name, rpmh_resource_name);
+ return -ENODEV;
+ }
+
+ vreg->rdesc.name = rpmh_data->name;
+ vreg->rdesc.supply_name = rpmh_data->supply_name;
+ vreg->hw_data = rpmh_data->hw_data;
+
+ vreg->enabled = -EINVAL;
+ vreg->voltage_selector = -ENOTRECOVERABLE;
+ vreg->mode = REGULATOR_MODE_INVALID;
+
+ if (rpmh_data->hw_data->n_voltages) {
+ vreg->rdesc.linear_ranges = &rpmh_data->hw_data->voltage_range;
+ vreg->rdesc.n_linear_ranges = 1;
+ vreg->rdesc.n_voltages = rpmh_data->hw_data->n_voltages;
+ }
+
+ vreg->always_wait_for_ack = of_property_read_bool(node,
+ "qcom,always-wait-for-ack");
+
+ vreg->rdesc.owner = THIS_MODULE;
+ vreg->rdesc.type = REGULATOR_VOLTAGE;
+ vreg->rdesc.ops = vreg->hw_data->ops;
+ vreg->rdesc.of_map_mode = vreg->hw_data->of_map_mode;
+
+ init_data = of_get_regulator_init_data(dev, node, &vreg->rdesc);
+ if (!init_data)
+ return -ENOMEM;
+
+ if (rpmh_data->hw_data->regulator_type == XOB &&
+ init_data->constraints.min_uV &&
+ init_data->constraints.min_uV == init_data->constraints.max_uV) {
+ vreg->rdesc.fixed_uV = init_data->constraints.min_uV;
+ vreg->rdesc.n_voltages = 1;
+ }
+
+ reg_config.dev = dev;
+ reg_config.init_data = init_data;
+ reg_config.of_node = node;
+ reg_config.driver_data = vreg;
+
+ rdev = devm_regulator_register(dev, &vreg->rdesc, &reg_config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(dev, "%s: devm_regulator_register() failed, ret=%d\n",
+ node->name, ret);
+ return ret;
+ }
+
+ dev_dbg(dev, "%s regulator registered for RPMh resource %s @ 0x%05X\n",
+ node->name, rpmh_resource_name, vreg->addr);
+
+ return 0;
+}
+
+static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
+ [REGULATOR_MODE_INVALID] = -EINVAL,
+ [REGULATOR_MODE_STANDBY] = PMIC4_LDO_MODE_RETENTION,
+ [REGULATOR_MODE_IDLE] = PMIC4_LDO_MODE_LPM,
+ [REGULATOR_MODE_NORMAL] = PMIC4_LDO_MODE_HPM,
+ [REGULATOR_MODE_FAST] = -EINVAL,
+};
+
+static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
+{
+ unsigned int mode;
+
+ switch (rpmh_mode) {
+ case RPMH_REGULATOR_MODE_HPM:
+ mode = REGULATOR_MODE_NORMAL;
+ break;
+ case RPMH_REGULATOR_MODE_LPM:
+ mode = REGULATOR_MODE_IDLE;
+ break;
+ case RPMH_REGULATOR_MODE_RET:
+ mode = REGULATOR_MODE_STANDBY;
+ break;
+ default:
+ mode = REGULATOR_MODE_INVALID;
+ }
+
+ return mode;
+}
+
+static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
+ [REGULATOR_MODE_INVALID] = -EINVAL,
+ [REGULATOR_MODE_STANDBY] = PMIC4_SMPS_MODE_RETENTION,
+ [REGULATOR_MODE_IDLE] = PMIC4_SMPS_MODE_PFM,
+ [REGULATOR_MODE_NORMAL] = PMIC4_SMPS_MODE_AUTO,
+ [REGULATOR_MODE_FAST] = PMIC4_SMPS_MODE_PWM,
+};
+
+static unsigned int
+rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode)
+{
+ unsigned int mode;
+
+ switch (rpmh_mode) {
+ case RPMH_REGULATOR_MODE_HPM:
+ mode = REGULATOR_MODE_FAST;
+ break;
+ case RPMH_REGULATOR_MODE_AUTO:
+ mode = REGULATOR_MODE_NORMAL;
+ break;
+ case RPMH_REGULATOR_MODE_LPM:
+ mode = REGULATOR_MODE_IDLE;
+ break;
+ case RPMH_REGULATOR_MODE_RET:
+ mode = REGULATOR_MODE_STANDBY;
+ break;
+ default:
+ mode = REGULATOR_MODE_INVALID;
+ }
+
+ return mode;
+}
+
+static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
+ [REGULATOR_MODE_INVALID] = -EINVAL,
+ [REGULATOR_MODE_STANDBY] = -EINVAL,
+ [REGULATOR_MODE_IDLE] = PMIC4_BOB_MODE_PFM,
+ [REGULATOR_MODE_NORMAL] = PMIC4_BOB_MODE_AUTO,
+ [REGULATOR_MODE_FAST] = PMIC4_BOB_MODE_PWM,
+};
+
+static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
+{
+ unsigned int mode;
+
+ switch (rpmh_mode) {
+ case RPMH_REGULATOR_MODE_HPM:
+ mode = REGULATOR_MODE_FAST;
+ break;
+ case RPMH_REGULATOR_MODE_AUTO:
+ mode = REGULATOR_MODE_NORMAL;
+ break;
+ case RPMH_REGULATOR_MODE_LPM:
+ mode = REGULATOR_MODE_IDLE;
+ break;
+ default:
+ mode = REGULATOR_MODE_INVALID;
+ }
+
+ return mode;
+}
+
+static const struct rpmh_vreg_hw_data pmic4_pldo = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000),
+ .n_voltages = 256,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_pldo_lv = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000),
+ .n_voltages = 128,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_nldo = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+ .n_voltages = 128,
+ .hpm_min_load_uA = 30000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_hfsmps3 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+ .n_voltages = 216,
+ .pmic_mode_map = pmic_mode_map_pmic4_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_ftsmps426 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
+ .n_voltages = 259,
+ .pmic_mode_map = pmic_mode_map_pmic4_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_bob = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_bypass_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000),
+ .n_voltages = 84,
+ .pmic_mode_map = pmic_mode_map_pmic4_bob,
+ .of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_lvs = {
+ .regulator_type = XOB,
+ .ops = &rpmh_regulator_xob_ops,
+ /* LVS hardware does not support voltage or mode configuration. */
+};
+
+#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
+{ \
+ .name = _name, \
+ .resource_name = _resource_name, \
+ .hw_data = _hw_data, \
+ .supply_name = _supply_name, \
+}
+
+static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic4_hfsmps3, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic4_hfsmps3, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic4_hfsmps3, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic4_ftsmps426, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic4_ftsmps426, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic4_ftsmps426, "vdd-s8"),
+ RPMH_VREG("smps9", "smp%s9", &pmic4_ftsmps426, "vdd-s9"),
+ RPMH_VREG("smps10", "smp%s10", &pmic4_ftsmps426, "vdd-s10"),
+ RPMH_VREG("smps11", "smp%s11", &pmic4_ftsmps426, "vdd-s11"),
+ RPMH_VREG("smps12", "smp%s12", &pmic4_ftsmps426, "vdd-s12"),
+ RPMH_VREG("smps13", "smp%s13", &pmic4_ftsmps426, "vdd-s13"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic4_nldo, "vdd-l1-l27"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic4_nldo, "vdd-l2-l8-l17"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic4_nldo, "vdd-l3-l11"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic4_nldo, "vdd-l4-l5"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic4_nldo, "vdd-l4-l5"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic4_pldo, "vdd-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic4_nldo, "vdd-l2-l8-l17"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic4_pldo, "vdd-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic4_pldo, "vdd-l10-l23-l25"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic4_nldo, "vdd-l3-l11"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic4_pldo, "vdd-l13-l19-l21"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic4_pldo, "vdd-l16-l28"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic4_nldo, "vdd-l2-l8-l17"),
+ RPMH_VREG("ldo18", "ldo%s18", &pmic4_pldo, "vdd-l18-l22"),
+ RPMH_VREG("ldo19", "ldo%s19", &pmic4_pldo, "vdd-l13-l19-l21"),
+ RPMH_VREG("ldo20", "ldo%s20", &pmic4_pldo, "vdd-l20-l24"),
+ RPMH_VREG("ldo21", "ldo%s21", &pmic4_pldo, "vdd-l13-l19-l21"),
+ RPMH_VREG("ldo22", "ldo%s22", &pmic4_pldo, "vdd-l18-l22"),
+ RPMH_VREG("ldo23", "ldo%s23", &pmic4_pldo, "vdd-l10-l23-l25"),
+ RPMH_VREG("ldo24", "ldo%s24", &pmic4_pldo, "vdd-l20-l24"),
+ RPMH_VREG("ldo25", "ldo%s25", &pmic4_pldo, "vdd-l10-l23-l25"),
+ RPMH_VREG("ldo26", "ldo%s26", &pmic4_nldo, "vdd-l26"),
+ RPMH_VREG("ldo27", "ldo%s27", &pmic4_nldo, "vdd-l1-l27"),
+ RPMH_VREG("ldo28", "ldo%s28", &pmic4_pldo, "vdd-l16-l28"),
+ RPMH_VREG("lvs1", "vs%s1", &pmic4_lvs, "vin-lvs-1-2"),
+ RPMH_VREG("lvs2", "vs%s2", &pmic4_lvs, "vin-lvs-1-2"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
+ RPMH_VREG("bob", "bob%s1", &pmic4_bob, "vdd-bob"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic4_ftsmps426, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic4_ftsmps426, "vdd-s4"),
+ {},
+};
+
+static int rpmh_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct rpmh_vreg_init_data *vreg_data;
+ struct device_node *node;
+ struct rpmh_vreg *vreg;
+ const char *pmic_id;
+ int ret;
+
+ vreg_data = of_device_get_match_data(dev);
+ if (!vreg_data)
+ return -ENODEV;
+
+ ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id);
+ if (ret < 0) {
+ dev_err(dev, "qcom,pmic-id missing in DT node\n");
+ return ret;
+ }
+
+ for_each_available_child_of_node(dev->of_node, node) {
+ vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ of_node_put(node);
+ return -ENOMEM;
+ }
+
+ ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id,
+ vreg_data);
+ if (ret < 0) {
+ of_node_put(node);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id rpmh_regulator_match_table[] = {
+ {
+ .compatible = "qcom,pm8998-rpmh-regulators",
+ .data = pm8998_vreg_data,
+ },
+ {
+ .compatible = "qcom,pmi8998-rpmh-regulators",
+ .data = pmi8998_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm8005-rpmh-regulators",
+ .data = pm8005_vreg_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
+
+static struct platform_driver rpmh_regulator_driver = {
+ .driver = {
+ .name = "qcom-rpmh-regulator",
+ .of_match_table = of_match_ptr(rpmh_regulator_match_table),
+ },
+ .probe = rpmh_regulator_probe,
+};
+module_platform_driver(rpmh_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm RPMh regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 9817f1a75342..53a61fb65642 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1060,7 +1060,7 @@ static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
#define SAW3_AVS_CTL_TGGL_MASK 0x8000000
#define SAW3_AVS_CTL_CLEAR_MASK 0x7efc00
-static struct regmap *saw_regmap = NULL;
+static struct regmap *saw_regmap;
static void spmi_saw_set_vdd(void *data)
{
@@ -1728,7 +1728,7 @@ static const struct spmi_regulator_data pmi8994_regulators[] = {
{ "s2", 0x1700, "vdd_s2", },
{ "s3", 0x1a00, "vdd_s3", },
{ "l1", 0x4000, "vdd_l1", },
- { }
+ { }
};
static const struct of_device_id qcom_spmi_regulator_match[] = {
@@ -1752,7 +1752,8 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
const char *name;
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
- struct device_node *syscon;
+ struct device_node *syscon, *reg_node;
+ struct property *reg_prop;
int ret, lenp;
struct list_head *vreg_list;
@@ -1774,16 +1775,19 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
syscon = of_parse_phandle(node, "qcom,saw-reg", 0);
saw_regmap = syscon_node_to_regmap(syscon);
of_node_put(syscon);
- if (IS_ERR(regmap))
+ if (IS_ERR(saw_regmap))
dev_err(dev, "ERROR reading SAW regmap\n");
}
for (reg = match->data; reg->name; reg++) {
- if (saw_regmap && \
- of_find_property(of_find_node_by_name(node, reg->name), \
- "qcom,saw-slave", &lenp)) {
- continue;
+ if (saw_regmap) {
+ reg_node = of_get_child_by_name(node, reg->name);
+ reg_prop = of_find_property(reg_node, "qcom,saw-slave",
+ &lenp);
+ of_node_put(reg_node);
+ if (reg_prop)
+ continue;
}
vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
@@ -1816,13 +1820,17 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
if (ret)
continue;
- if (saw_regmap && \
- of_find_property(of_find_node_by_name(node, reg->name), \
- "qcom,saw-leader", &lenp)) {
- spmi_saw_ops = *(vreg->desc.ops);
- spmi_saw_ops.set_voltage_sel = \
- spmi_regulator_saw_set_voltage;
- vreg->desc.ops = &spmi_saw_ops;
+ if (saw_regmap) {
+ reg_node = of_get_child_by_name(node, reg->name);
+ reg_prop = of_find_property(reg_node, "qcom,saw-leader",
+ &lenp);
+ of_node_put(reg_node);
+ if (reg_prop) {
+ spmi_saw_ops = *(vreg->desc.ops);
+ spmi_saw_ops.set_voltage_sel =
+ spmi_regulator_saw_set_voltage;
+ vreg->desc.ops = &spmi_saw_ops;
+ }
}
config.dev = dev;
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 48f0ca90743c..095d25f3d2ea 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -1,13 +1,7 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2013 Samsung Electronics Co., Ltd
+// http://www.samsung.com
#include <linux/bug.h>
#include <linux/err.h>
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index d1207ec683db..5bb6f4ca48db 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1,20 +1,7 @@
-/*
- * s2mps11.c
- *
- * Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
+// http://www.samsung.com
#include <linux/bug.h>
#include <linux/err.h>
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 0cbc980753c2..667d16dc83ce 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -1,15 +1,7 @@
-/*
- * s5m8767.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd
+// http://www.samsung.com
#include <linux/err.h>
#include <linux/of_gpio.h>
diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c
index fc12badf3805..d84fab616abf 100644
--- a/drivers/regulator/tps65217-regulator.c
+++ b/drivers/regulator/tps65217-regulator.c
@@ -232,6 +232,8 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
tps->strobes = devm_kcalloc(&pdev->dev,
TPS65217_NUM_REGULATOR, sizeof(u8),
GFP_KERNEL);
+ if (!tps->strobes)
+ return -ENOMEM;
platform_set_drvdata(pdev, tps);
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
new file mode 100644
index 000000000000..abf22acbd13e
--- /dev/null
+++ b/drivers/regulator/uniphier-regulator.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulator controller driver for UniPhier SoC
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/reset.h>
+
+#define MAX_CLKS 2
+#define MAX_RSTS 2
+
+struct uniphier_regulator_soc_data {
+ int nclks;
+ const char * const *clock_names;
+ int nrsts;
+ const char * const *reset_names;
+ const struct regulator_desc *desc;
+ const struct regmap_config *regconf;
+};
+
+struct uniphier_regulator_priv {
+ struct clk_bulk_data clk[MAX_CLKS];
+ struct reset_control *rst[MAX_RSTS];
+ const struct uniphier_regulator_soc_data *data;
+};
+
+static struct regulator_ops uniphier_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static int uniphier_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct uniphier_regulator_priv *priv;
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ struct regmap *regmap;
+ struct resource *res;
+ void __iomem *base;
+ const char *name;
+ int i, ret, nr;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->data = of_device_get_match_data(dev);
+ if (WARN_ON(!priv->data))
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ for (i = 0; i < priv->data->nclks; i++)
+ priv->clk[i].id = priv->data->clock_names[i];
+ ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < priv->data->nrsts; i++) {
+ name = priv->data->reset_names[i];
+ priv->rst[i] = devm_reset_control_get_shared(dev, name);
+ if (IS_ERR(priv->rst[i]))
+ return PTR_ERR(priv->rst[i]);
+ }
+
+ ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+ if (ret)
+ return ret;
+
+ for (nr = 0; nr < priv->data->nrsts; nr++) {
+ ret = reset_control_deassert(priv->rst[nr]);
+ if (ret)
+ goto out_rst_assert;
+ }
+
+ regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ config.dev = dev;
+ config.driver_data = priv;
+ config.of_node = dev->of_node;
+ config.regmap = regmap;
+ config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+ priv->data->desc);
+ rdev = devm_regulator_register(dev, priv->data->desc, &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ goto out_rst_assert;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+
+out_rst_assert:
+ while (nr--)
+ reset_control_assert(priv->rst[nr]);
+
+ clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+ return ret;
+}
+
+static int uniphier_regulator_remove(struct platform_device *pdev)
+{
+ struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < priv->data->nrsts; i++)
+ reset_control_assert(priv->rst[i]);
+
+ clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+ return 0;
+}
+
+/* USB3 controller data */
+#define USB3VBUS_OFFSET 0x0
+#define USB3VBUS_REG BIT(4)
+#define USB3VBUS_REG_EN BIT(3)
+static const struct regulator_desc uniphier_usb3_regulator_desc = {
+ .name = "vbus",
+ .of_match = of_match_ptr("vbus"),
+ .ops = &uniphier_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = USB3VBUS_OFFSET,
+ .enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG,
+ .enable_val = USB3VBUS_REG_EN | USB3VBUS_REG,
+ .disable_val = USB3VBUS_REG_EN,
+};
+
+static const struct regmap_config uniphier_usb3_regulator_regconf = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 1,
+};
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+ "gio", "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = {
+ .nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+ .clock_names = uniphier_pro4_clock_reset_names,
+ .nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+ .reset_names = uniphier_pro4_clock_reset_names,
+ .desc = &uniphier_usb3_regulator_desc,
+ .regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+ "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = {
+ .nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+ .clock_names = uniphier_pxs2_clock_reset_names,
+ .nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+ .reset_names = uniphier_pxs2_clock_reset_names,
+ .desc = &uniphier_usb3_regulator_desc,
+ .regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const struct of_device_id uniphier_regulator_match[] = {
+ /* USB VBUS */
+ {
+ .compatible = "socionext,uniphier-pro4-usb3-regulator",
+ .data = &uniphier_pro4_usb3_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-usb3-regulator",
+ .data = &uniphier_pxs2_usb3_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-usb3-regulator",
+ .data = &uniphier_pxs2_usb3_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-usb3-regulator",
+ .data = &uniphier_pxs2_usb3_data,
+ },
+ { /* Sentinel */ },
+};
+
+static struct platform_driver uniphier_regulator_driver = {
+ .probe = uniphier_regulator_probe,
+ .remove = uniphier_regulator_remove,
+ .driver = {
+ .name = "uniphier-regulator",
+ .of_match_table = uniphier_regulator_match,
+ },
+};
+module_platform_driver(uniphier_regulator_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Regulator Controller Driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 06:33:51 +0300