summaryrefslogtreecommitdiff
path: root/drivers/regulator/tps65090-regulator.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/tps65090-regulator.c')
-rw-r--r--drivers/regulator/tps65090-regulator.c214
1 files changed, 199 insertions, 15 deletions
diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 2e92ef68574d..2064b3fd45f7 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -17,6 +17,7 @@
*/
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
@@ -28,49 +29,216 @@
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/tps65090.h>
+#define MAX_CTRL_READ_TRIES 5
+#define MAX_FET_ENABLE_TRIES 1000
+
+#define CTRL_EN_BIT 0 /* Regulator enable bit, active high */
+#define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */
+#define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */
+#define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */
+
+#define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */
+
+/**
+ * struct tps65090_regulator - Per-regulator data for a tps65090 regulator
+ *
+ * @dev: Pointer to our device.
+ * @desc: The struct regulator_desc for the regulator.
+ * @rdev: The struct regulator_dev for the regulator.
+ * @overcurrent_wait_valid: True if overcurrent_wait is valid.
+ * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
+ */
+
struct tps65090_regulator {
struct device *dev;
struct regulator_desc *desc;
struct regulator_dev *rdev;
+ bool overcurrent_wait_valid;
+ int overcurrent_wait;
};
static struct regulator_ops tps65090_ext_control_ops = {
};
-static struct regulator_ops tps65090_reg_contol_ops = {
+/**
+ * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
+ *
+ * This will set the overcurrent wait time based on what's in the regulator
+ * info.
+ *
+ * @ri: Overall regulator data
+ * @rdev: Regulator device
+ *
+ * Return: 0 if no error, non-zero if there was an error writing the register.
+ */
+static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri,
+ struct regulator_dev *rdev)
+{
+ int ret;
+
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ MAX_OVERCURRENT_WAIT << CTRL_WT_BIT,
+ ri->overcurrent_wait << CTRL_WT_BIT);
+ if (ret) {
+ dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n",
+ rdev->desc->enable_reg);
+ }
+
+ return ret;
+}
+
+/**
+ * tps65090_try_enable_fet - Try to enable a FET
+ *
+ * @rdev: Regulator device
+ *
+ * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
+ * set, or some other -ve value if another error occurred (e.g. i2c error)
+ */
+static int tps65090_try_enable_fet(struct regulator_dev *rdev)
+{
+ unsigned int control;
+ int ret, i;
+
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
+ if (ret < 0) {
+ dev_err(&rdev->dev, "Error in updating reg %#x\n",
+ rdev->desc->enable_reg);
+ return ret;
+ }
+
+ for (i = 0; i < MAX_CTRL_READ_TRIES; i++) {
+ ret = regmap_read(rdev->regmap, rdev->desc->enable_reg,
+ &control);
+ if (ret < 0)
+ return ret;
+
+ if (!(control & BIT(CTRL_TO_BIT)))
+ break;
+
+ usleep_range(1000, 1500);
+ }
+ if (!(control & BIT(CTRL_PG_BIT)))
+ return -ENOTRECOVERABLE;
+
+ return 0;
+}
+
+/**
+ * tps65090_fet_enable - Enable a FET, trying a few times if it fails
+ *
+ * Some versions of the tps65090 have issues when turning on the FETs.
+ * This function goes through several steps to ensure the best chance of the
+ * FET going on. Specifically:
+ * - We'll make sure that we bump the "overcurrent wait" to the maximum, which
+ * increases the chances that we'll turn on properly.
+ * - We'll retry turning the FET on multiple times (turning off in between).
+ *
+ * @rdev: Regulator device
+ *
+ * Return: 0 if ok, non-zero if it fails.
+ */
+static int tps65090_fet_enable(struct regulator_dev *rdev)
+{
+ int ret, tries;
+
+ /*
+ * Try enabling multiple times until we succeed since sometimes the
+ * first try times out.
+ */
+ tries = 0;
+ while (true) {
+ ret = tps65090_try_enable_fet(rdev);
+ if (!ret)
+ break;
+ if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES)
+ goto err;
+
+ /* Try turning the FET off (and then on again) */
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, 0);
+ if (ret)
+ goto err;
+
+ tries++;
+ }
+
+ if (tries)
+ dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n",
+ rdev->desc->enable_reg, tries);
+
+ return 0;
+err:
+ dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg);
+ WARN_ON(1);
+
+ return ret;
+}
+
+static struct regulator_ops tps65090_reg_control_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
+static struct regulator_ops tps65090_fet_control_ops = {
+ .enable = tps65090_fet_enable,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
static struct regulator_ops tps65090_ldo_ops = {
};
-#define tps65090_REG_DESC(_id, _sname, _en_reg, _ops) \
+#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _ops) \
{ \
.name = "TPS65090_RAILS"#_id, \
.supply_name = _sname, \
.id = TPS65090_REGULATOR_##_id, \
.ops = &_ops, \
.enable_reg = _en_reg, \
- .enable_mask = BIT(0), \
+ .enable_val = _en_bits, \
+ .enable_mask = _en_bits, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}
static struct regulator_desc tps65090_regulator_desc[] = {
- tps65090_REG_DESC(DCDC1, "vsys1", 0x0C, tps65090_reg_contol_ops),
- tps65090_REG_DESC(DCDC2, "vsys2", 0x0D, tps65090_reg_contol_ops),
- tps65090_REG_DESC(DCDC3, "vsys3", 0x0E, tps65090_reg_contol_ops),
- tps65090_REG_DESC(FET1, "infet1", 0x0F, tps65090_reg_contol_ops),
- tps65090_REG_DESC(FET2, "infet2", 0x10, tps65090_reg_contol_ops),
- tps65090_REG_DESC(FET3, "infet3", 0x11, tps65090_reg_contol_ops),
- tps65090_REG_DESC(FET4, "infet4", 0x12, tps65090_reg_contol_ops),
- tps65090_REG_DESC(FET5, "infet5", 0x13, tps65090_reg_contol_ops),
- tps65090_REG_DESC(FET6, "infet6", 0x14, tps65090_reg_contol_ops),
- tps65090_REG_DESC(FET7, "infet7", 0x15, tps65090_reg_contol_ops),
- tps65090_REG_DESC(LDO1, "vsys-l1", 0, tps65090_ldo_ops),
- tps65090_REG_DESC(LDO2, "vsys-l2", 0, tps65090_ldo_ops),
+ tps65090_REG_DESC(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT),
+ tps65090_reg_control_ops),
+ tps65090_REG_DESC(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT),
+ tps65090_reg_control_ops),
+ tps65090_REG_DESC(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT),
+ tps65090_reg_control_ops),
+
+ tps65090_REG_DESC(FET1, "infet1", 0x0F,
+ BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+ tps65090_fet_control_ops),
+ tps65090_REG_DESC(FET2, "infet2", 0x10,
+ BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+ tps65090_fet_control_ops),
+ tps65090_REG_DESC(FET3, "infet3", 0x11,
+ BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+ tps65090_fet_control_ops),
+ tps65090_REG_DESC(FET4, "infet4", 0x12,
+ BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+ tps65090_fet_control_ops),
+ tps65090_REG_DESC(FET5, "infet5", 0x13,
+ BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+ tps65090_fet_control_ops),
+ tps65090_REG_DESC(FET6, "infet6", 0x14,
+ BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+ tps65090_fet_control_ops),
+ tps65090_REG_DESC(FET7, "infet7", 0x15,
+ BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+ tps65090_fet_control_ops),
+
+ tps65090_REG_DESC(LDO1, "vsys-l1", 0, 0,
+ tps65090_ldo_ops),
+ tps65090_REG_DESC(LDO2, "vsys-l2", 0, 0,
+ tps65090_ldo_ops),
};
static inline bool is_dcdc(int id)
@@ -209,6 +377,11 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
rpdata->gpio = of_get_named_gpio(np,
"dcdc-ext-control-gpios", 0);
+ if (of_property_read_u32(tps65090_matches[idx].of_node,
+ "ti,overcurrent-wait",
+ &rpdata->overcurrent_wait) == 0)
+ rpdata->overcurrent_wait_valid = true;
+
tps65090_pdata->reg_pdata[idx] = rpdata;
}
return tps65090_pdata;
@@ -258,6 +431,11 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
ri = &pmic[num];
ri->dev = &pdev->dev;
ri->desc = &tps65090_regulator_desc[num];
+ if (tps_pdata) {
+ ri->overcurrent_wait_valid =
+ tps_pdata->overcurrent_wait_valid;
+ ri->overcurrent_wait = tps_pdata->overcurrent_wait;
+ }
/*
* TPS5090 DCDC support the control from external digital input.
@@ -299,6 +477,12 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
}
ri->rdev = rdev;
+ if (ri->overcurrent_wait_valid) {
+ ret = tps65090_reg_set_overcurrent_wait(ri, rdev);
+ if (ret < 0)
+ return ret;
+ }
+
/* Enable external control if it is require */
if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data &&
tps_pdata->enable_ext_control) {
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-01 05:22:18 +0300