diff options
Diffstat (limited to 'drivers/regulator/lp3971.c')
-rw-r--r-- | drivers/regulator/lp3971.c | 66 |
1 files changed, 23 insertions, 43 deletions
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 981bea9cb9d7..7c6e3b8ff484 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -65,11 +65,11 @@ static const int buck_base_addr[] = { #define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x]) #define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1) -static const int buck_voltage_map[] = { - 0, 800, 850, 900, 950, 1000, 1050, 1100, - 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, - 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800, - 3000, 3300, +static const unsigned int buck_voltage_map[] = { + 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, + 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, + 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000, + 3000000, 3300000, }; #define BUCK_TARGET_VOL_MASK 0x3f @@ -98,39 +98,19 @@ static const int buck_voltage_map[] = { #define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2) #define LDO_VOL_CONTR_MASK 0x0f -static const int ldo45_voltage_map[] = { - 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, - 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300, +static const unsigned int ldo45_voltage_map[] = { + 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000, + 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000, }; -static const int ldo123_voltage_map[] = { - 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, - 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300, +static const unsigned int ldo123_voltage_map[] = { + 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000, + 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, }; -static const int *ldo_voltage_map[] = { - ldo123_voltage_map, /* LDO1 */ - ldo123_voltage_map, /* LDO2 */ - ldo123_voltage_map, /* LDO3 */ - ldo45_voltage_map, /* LDO4 */ - ldo45_voltage_map, /* LDO5 */ -}; - -#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)]) - #define LDO_VOL_MIN_IDX 0x00 #define LDO_VOL_MAX_IDX 0x0f -static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index) -{ - int ldo = rdev_get_id(dev) - LP3971_LDO1; - - if (index > LDO_VOL_MAX_IDX) - return -EINVAL; - - return 1000 * LDO_VOL_VALUE_MAP(ldo)[index]; -} - static int lp3971_ldo_is_enabled(struct regulator_dev *dev) { struct lp3971 *lp3971 = rdev_get_drvdata(dev); @@ -169,7 +149,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev) reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo)); val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK; - return 1000 * LDO_VOL_VALUE_MAP(ldo)[val]; + return dev->desc->volt_table[val]; } static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev, @@ -184,7 +164,7 @@ static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev, } static struct regulator_ops lp3971_ldo_ops = { - .list_voltage = lp3971_ldo_list_voltage, + .list_voltage = regulator_list_voltage_table, .is_enabled = lp3971_ldo_is_enabled, .enable = lp3971_ldo_enable, .disable = lp3971_ldo_disable, @@ -192,14 +172,6 @@ static struct regulator_ops lp3971_ldo_ops = { .set_voltage_sel = lp3971_ldo_set_voltage_sel, }; -static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index) -{ - if (index < BUCK_TARGET_VOL_MIN_IDX || index > BUCK_TARGET_VOL_MAX_IDX) - return -EINVAL; - - return 1000 * buck_voltage_map[index]; -} - static int lp3971_dcdc_is_enabled(struct regulator_dev *dev) { struct lp3971 *lp3971 = rdev_get_drvdata(dev); @@ -240,7 +212,7 @@ static int lp3971_dcdc_get_voltage(struct regulator_dev *dev) reg &= BUCK_TARGET_VOL_MASK; if (reg <= BUCK_TARGET_VOL_MAX_IDX) - val = 1000 * buck_voltage_map[reg]; + val = buck_voltage_map[reg]; else { val = 0; dev_warn(&dev->dev, "chip reported incorrect voltage value.\n"); @@ -273,7 +245,7 @@ static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev, } static struct regulator_ops lp3971_dcdc_ops = { - .list_voltage = lp3971_dcdc_list_voltage, + .list_voltage = regulator_list_voltage_table, .is_enabled = lp3971_dcdc_is_enabled, .enable = lp3971_dcdc_enable, .disable = lp3971_dcdc_disable, @@ -287,6 +259,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_LDO1, .ops = &lp3971_ldo_ops, .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .volt_table = ldo123_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -295,6 +268,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_LDO2, .ops = &lp3971_ldo_ops, .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .volt_table = ldo123_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -303,6 +277,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_LDO3, .ops = &lp3971_ldo_ops, .n_voltages = ARRAY_SIZE(ldo123_voltage_map), + .volt_table = ldo123_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -311,6 +286,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_LDO4, .ops = &lp3971_ldo_ops, .n_voltages = ARRAY_SIZE(ldo45_voltage_map), + .volt_table = ldo45_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -319,6 +295,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_LDO5, .ops = &lp3971_ldo_ops, .n_voltages = ARRAY_SIZE(ldo45_voltage_map), + .volt_table = ldo45_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -327,6 +304,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_DCDC1, .ops = &lp3971_dcdc_ops, .n_voltages = ARRAY_SIZE(buck_voltage_map), + .volt_table = buck_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -335,6 +313,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_DCDC2, .ops = &lp3971_dcdc_ops, .n_voltages = ARRAY_SIZE(buck_voltage_map), + .volt_table = buck_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -343,6 +322,7 @@ static const struct regulator_desc regulators[] = { .id = LP3971_DCDC3, .ops = &lp3971_dcdc_ops, .n_voltages = ARRAY_SIZE(buck_voltage_map), + .volt_table = buck_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, |