summaryrefslogtreecommitdiff
path: root/drivers/regulator/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/Kconfig')
-rw-r--r--drivers/regulator/Kconfig284
1 files changed, 161 insertions, 123 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f1e6ad98eeba..dfe58096b374 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -64,15 +64,21 @@ config REGULATOR_USERSPACE_CONSUMER
If unsure, say no.
-config REGULATOR_GPIO
- tristate "GPIO regulator support"
- depends on GPIOLIB
+config REGULATOR_88PM800
+ tristate "Marvell 88PM800 Power regulators"
+ depends on MFD_88PM800
help
- This driver provides support for regulators that can be
- controlled via gpios.
- It is capable of supporting current and voltage regulators
- and the platform has to provide a mapping of GPIO-states
- to target volts/amps.
+ This driver supports Marvell 88PM800 voltage regulator chips.
+ It delivers digitally programmable output,
+ the voltage is programmed via I2C interface.
+ It's suitable to support PXA988 chips to control VCC_MAIN and
+ various voltages.
+
+config REGULATOR_88PM8607
+ tristate "Marvell 88PM8607 Power regulators"
+ depends on MFD_88PM860X=y
+ help
+ This driver supports 88PM8607 voltage regulator chips.
config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
@@ -81,6 +87,14 @@ config REGULATOR_AD5398
This driver supports AD5398 and AD5821 current regulator chips.
If building into module, its name is ad5398.ko.
+config REGULATOR_ANATOP
+ tristate "Freescale i.MX on-chip ANATOP LDO regulators"
+ depends on MFD_SYSCON
+ help
+ Say y here to support Freescale i.MX on-chip ANATOP LDOs
+ regulators. It is recommended that this option be
+ enabled on i.MX6 platform.
+
config REGULATOR_AAT2870
tristate "AnalogicTech AAT2870 Regulators"
depends on MFD_AAT2870_CORE
@@ -88,6 +102,22 @@ config REGULATOR_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.
+config REGULATOR_AB3100
+ tristate "ST-Ericsson AB3100 Regulator functions"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ These regulators correspond to functionality in the
+ AB3100 analog baseband dealing with power regulators
+ for the system.
+
+config REGULATOR_AB8500
+ bool "ST-Ericsson AB8500 Power Regulators"
+ depends on AB8500_CORE
+ help
+ This driver supports the regulators found on the ST-Ericsson mixed
+ signal AB8500 PMIC
+
config REGULATOR_ARIZONA
tristate "Wolfson Arizona class devices"
depends on MFD_ARIZONA
@@ -96,6 +126,13 @@ config REGULATOR_ARIZONA
Support for the regulators found on Wolfson Arizona class
devices.
+config REGULATOR_AS3711
+ tristate "AS3711 PMIC"
+ depends on MFD_AS3711
+ help
+ This driver provides support for the voltage regulators on the
+ AS3711 PMIC
+
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
@@ -120,6 +157,37 @@ config REGULATOR_DA9055
This driver can also be built as a module. If so, the module
will be called da9055-regulator.
+config REGULATOR_DA9063
+ tristate "Dialog Semiconductor DA9063 regulators"
+ depends on MFD_DA9063
+ help
+ Say y here to support the BUCKs and LDOs regulators found on
+ DA9063 PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called da9063-regulator.
+
+config REGULATOR_DA9210
+ tristate "Dialog Semiconductor DA9210 regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say y here to support for the Dialog Semiconductor DA9210.
+ The DA9210 is a multi-phase synchronous step down
+ converter 12A DC-DC Buck controlled through an I2C
+ interface.
+
+config REGULATOR_DBX500_PRCMU
+ bool
+
+config REGULATOR_DB8500_PRCMU
+ bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+ depends on MFD_DB8500_PRCMU
+ select REGULATOR_DBX500_PRCMU
+ help
+ This driver supports the voltage domain regulators controlled by the
+ DB8500 PRCMU
+
config REGULATOR_FAN53555
tristate "Fairchild FAN53555 Regulator"
depends on I2C
@@ -131,44 +199,57 @@ config REGULATOR_FAN53555
input voltage supply of 2.5V to 5.5V. The output voltage is
programmed through an I2C interface.
-config REGULATOR_ANATOP
- tristate "Freescale i.MX on-chip ANATOP LDO regulators"
- depends on MFD_SYSCON
+config REGULATOR_GPIO
+ tristate "GPIO regulator support"
+ depends on GPIOLIB
help
- Say y here to support Freescale i.MX on-chip ANATOP LDOs
- regulators. It is recommended that this option be
- enabled on i.MX6 platform.
+ This driver provides support for regulators that can be
+ controlled via gpios.
+ It is capable of supporting current and voltage regulators
+ and the platform has to provide a mapping of GPIO-states
+ to target volts/amps.
-config REGULATOR_MC13XXX_CORE
- tristate
+config REGULATOR_ISL6271A
+ tristate "Intersil ISL6271A Power regulator"
+ depends on I2C
+ help
+ This driver supports ISL6271A voltage regulator chip.
-config REGULATOR_MC13783
- tristate "Freescale MC13783 regulator driver"
- depends on MFD_MC13783
- select REGULATOR_MC13XXX_CORE
+config REGULATOR_LP3971
+ tristate "National Semiconductors LP3971 PMIC regulator driver"
+ depends on I2C
help
- Say y here to support the regulators found on the Freescale MC13783
- PMIC.
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3971 PMIC
-config REGULATOR_MC13892
- tristate "Freescale MC13892 regulator driver"
- depends on MFD_MC13XXX
- select REGULATOR_MC13XXX_CORE
+config REGULATOR_LP3972
+ tristate "National Semiconductors LP3972 PMIC regulator driver"
+ depends on I2C
help
- Say y here to support the regulators found on the Freescale MC13892
- PMIC.
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3972 PMIC
-config REGULATOR_ISL6271A
- tristate "Intersil ISL6271A Power regulator"
+config REGULATOR_LP872X
+ tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
depends on I2C
+ select REGMAP_I2C
help
- This driver supports ISL6271A voltage regulator chip.
+ This driver supports LP8720/LP8725 PMIC
-config REGULATOR_88PM8607
- bool "Marvell 88PM8607 Power regulators"
- depends on MFD_88PM860X=y
+config REGULATOR_LP8755
+ tristate "TI LP8755 High Performance PMU driver"
+ depends on I2C
+ select REGMAP_I2C
help
- This driver supports 88PM8607 voltage regulator chips.
+ This driver supports LP8755 High Performance PMU driver. This
+ chip contains six step-down DC/DC converters which can support
+ 9 mode multiphase configuration.
+
+config REGULATOR_LP8788
+ tristate "TI LP8788 Power Regulators"
+ depends on MFD_LP8788
+ help
+ This driver supports LP8788 voltage regulator chip.
config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
@@ -259,48 +340,43 @@ config REGULATOR_MAX77693
and one current regulator 'CHARGER'. This is suitable for
Exynos-4x12 chips.
-config REGULATOR_PCAP
- tristate "Motorola PCAP2 regulator driver"
- depends on EZX_PCAP
- help
- This driver provides support for the voltage regulators of the
- PCAP2 PMIC.
+config REGULATOR_MC13XXX_CORE
+ tristate
-config REGULATOR_LP3971
- tristate "National Semiconductors LP3971 PMIC regulator driver"
- depends on I2C
+config REGULATOR_MC13783
+ tristate "Freescale MC13783 regulator driver"
+ depends on MFD_MC13783
+ select REGULATOR_MC13XXX_CORE
help
- Say Y here to support the voltage regulators and convertors
- on National Semiconductors LP3971 PMIC
+ Say y here to support the regulators found on the Freescale MC13783
+ PMIC.
-config REGULATOR_LP3972
- tristate "National Semiconductors LP3972 PMIC regulator driver"
- depends on I2C
+config REGULATOR_MC13892
+ tristate "Freescale MC13892 regulator driver"
+ depends on MFD_MC13XXX
+ select REGULATOR_MC13XXX_CORE
help
- Say Y here to support the voltage regulators and convertors
- on National Semiconductors LP3972 PMIC
+ Say y here to support the regulators found on the Freescale MC13892
+ PMIC.
-config REGULATOR_LP872X
- bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
- depends on I2C=y
- select REGMAP_I2C
+config REGULATOR_PALMAS
+ tristate "TI Palmas PMIC Regulators"
+ depends on MFD_PALMAS
help
- This driver supports LP8720/LP8725 PMIC
+ If you wish to control the regulators on the Palmas series of
+ chips say Y here. This will enable support for all the software
+ controllable SMPS/LDO regulators.
-config REGULATOR_LP8755
- tristate "TI LP8755 High Performance PMU driver"
- depends on I2C
- select REGMAP_I2C
- help
- This driver supports LP8755 High Performance PMU driver. This
- chip contains six step-down DC/DC converters which can support
- 9 mode multiphase configuration.
+ The regulators available on Palmas series chips vary depending
+ on the muxing. This is handled automatically in the driver by
+ reading the mux info from OTP.
-config REGULATOR_LP8788
- bool "TI LP8788 Power Regulators"
- depends on MFD_LP8788
+config REGULATOR_PCAP
+ tristate "Motorola PCAP2 regulator driver"
+ depends on EZX_PCAP
help
- This driver supports LP8788 voltage regulator chip.
+ This driver provides support for the voltage regulators of the
+ PCAP2 PMIC.
config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
@@ -309,6 +385,14 @@ config REGULATOR_PCF50633
Say Y here to support the voltage regulators and convertors
on PCF50633
+config REGULATOR_PFUZE100
+ tristate "Support regulators on Freescale PFUZE100 PMIC"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say y here to support the regulators found on the Freescale PFUZE100
+ PMIC.
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
@@ -335,44 +419,15 @@ config REGULATOR_S5M8767
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
supports DVS mode with 8bits of output voltage control.
-config REGULATOR_AB3100
- tristate "ST-Ericsson AB3100 Regulator functions"
- depends on AB3100_CORE
- default y if AB3100_CORE
- help
- These regulators correspond to functionality in the
- AB3100 analog baseband dealing with power regulators
- for the system.
-
-config REGULATOR_AB8500
- bool "ST-Ericsson AB8500 Power Regulators"
- depends on AB8500_CORE
- help
- This driver supports the regulators found on the ST-Ericsson mixed
- signal AB8500 PMIC
-
-config REGULATOR_DBX500_PRCMU
- bool
-
-config REGULATOR_DB8500_PRCMU
- bool "ST-Ericsson DB8500 Voltage Domain Regulators"
- depends on MFD_DB8500_PRCMU
- select REGULATOR_DBX500_PRCMU
- help
- This driver supports the voltage domain regulators controlled by the
- DB8500 PRCMU
-
-config REGULATOR_PALMAS
- tristate "TI Palmas PMIC Regulators"
- depends on MFD_PALMAS
+config REGULATOR_TI_ABB
+ tristate "TI Adaptive Body Bias on-chip LDO"
+ depends on ARCH_OMAP
help
- If you wish to control the regulators on the Palmas series of
- chips say Y here. This will enable support for all the software
- controllable SMPS/LDO regulators.
-
- The regulators available on Palmas series chips vary depending
- on the muxing. This is handled automatically in the driver by
- reading the mux info from OTP.
+ Select this option to support Texas Instruments' on-chip Adaptive Body
+ Bias (ABB) LDO regulators. It is recommended that this option be
+ enabled on required TI SoC. Certain Operating Performance Points
+ on TI SoCs may be unstable without enabling this as it provides
+ device specific optimized bias to allow/optimize functionality.
config REGULATOR_TPS51632
tristate "TI TPS51632 Power Regulator"
@@ -475,22 +530,12 @@ config REGULATOR_TPS80031
output to control regulators.
config REGULATOR_TWL4030
- bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
+ tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
depends on TWL4030_CORE
help
This driver supports the voltage regulators provided by
this family of companion chips.
-config REGULATOR_TI_ABB
- bool "TI Adaptive Body Bias on-chip LDO"
- depends on ARCH_OMAP
- help
- Select this option to support Texas Instruments' on-chip Adaptive Body
- Bias (ABB) LDO regulators. It is recommended that this option be
- enabled on required TI SoC. Certain Operating Performance Points
- on TI SoCs may be unstable without enabling this as it provides
- device specific optimized bias to allow/optimize functionality.
-
config REGULATOR_VEXPRESS
tristate "Versatile Express regulators"
depends on VEXPRESS_CONFIG
@@ -526,12 +571,5 @@ config REGULATOR_WM8994
This driver provides support for the voltage regulators on the
WM8994 CODEC.
-config REGULATOR_AS3711
- tristate "AS3711 PMIC"
- depends on MFD_AS3711
- help
- This driver provides support for the voltage regulators on the
- AS3711 PMIC
-
endif