diff options
Diffstat (limited to 'drivers/power/supply/sc27xx_fuel_gauge.c')
| -rw-r--r-- | drivers/power/supply/sc27xx_fuel_gauge.c | 1075 |
1 files changed, 1075 insertions, 0 deletions
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c new file mode 100644 index 000000000000..76da1895b782 --- /dev/null +++ b/drivers/power/supply/sc27xx_fuel_gauge.c @@ -0,0 +1,1075 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Spreadtrum Communications Inc. + +#include <linux/gpio/consumer.h> +#include <linux/iio/consumer.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* PMIC global control registers definition */ +#define SC27XX_MODULE_EN0 0xc08 +#define SC27XX_CLK_EN0 0xc18 +#define SC27XX_FGU_EN BIT(7) +#define SC27XX_FGU_RTC_EN BIT(6) + +/* FGU registers definition */ +#define SC27XX_FGU_START 0x0 +#define SC27XX_FGU_CONFIG 0x4 +#define SC27XX_FGU_ADC_CONFIG 0x8 +#define SC27XX_FGU_STATUS 0xc +#define SC27XX_FGU_INT_EN 0x10 +#define SC27XX_FGU_INT_CLR 0x14 +#define SC27XX_FGU_INT_STS 0x1c +#define SC27XX_FGU_VOLTAGE 0x20 +#define SC27XX_FGU_OCV 0x24 +#define SC27XX_FGU_POCV 0x28 +#define SC27XX_FGU_CURRENT 0x2c +#define SC27XX_FGU_LOW_OVERLOAD 0x34 +#define SC27XX_FGU_CLBCNT_SETH 0x50 +#define SC27XX_FGU_CLBCNT_SETL 0x54 +#define SC27XX_FGU_CLBCNT_DELTH 0x58 +#define SC27XX_FGU_CLBCNT_DELTL 0x5c +#define SC27XX_FGU_CLBCNT_VALH 0x68 +#define SC27XX_FGU_CLBCNT_VALL 0x6c +#define SC27XX_FGU_CLBCNT_QMAXL 0x74 +#define SC27XX_FGU_USER_AREA_SET 0xa0 +#define SC27XX_FGU_USER_AREA_CLEAR 0xa4 +#define SC27XX_FGU_USER_AREA_STATUS 0xa8 + +#define SC27XX_WRITE_SELCLB_EN BIT(0) +#define SC27XX_FGU_CLBCNT_MASK GENMASK(15, 0) +#define SC27XX_FGU_CLBCNT_SHIFT 16 +#define SC27XX_FGU_LOW_OVERLOAD_MASK GENMASK(12, 0) + +#define SC27XX_FGU_INT_MASK GENMASK(9, 0) +#define SC27XX_FGU_LOW_OVERLOAD_INT BIT(0) +#define SC27XX_FGU_CLBCNT_DELTA_INT BIT(2) + +#define SC27XX_FGU_MODE_AREA_MASK GENMASK(15, 12) +#define SC27XX_FGU_CAP_AREA_MASK GENMASK(11, 0) +#define SC27XX_FGU_MODE_AREA_SHIFT 12 + +#define SC27XX_FGU_FIRST_POWERTON GENMASK(3, 0) +#define SC27XX_FGU_DEFAULT_CAP GENMASK(11, 0) +#define SC27XX_FGU_NORMAIL_POWERTON 0x5 + +#define SC27XX_FGU_CUR_BASIC_ADC 8192 +#define SC27XX_FGU_SAMPLE_HZ 2 + +/* + * struct sc27xx_fgu_data: describe the FGU device + * @regmap: regmap for register access + * @dev: platform device + * @battery: battery power supply + * @base: the base offset for the controller + * @lock: protect the structure + * @gpiod: GPIO for battery detection + * @channel: IIO channel to get battery temperature + * @internal_resist: the battery internal resistance in mOhm + * @total_cap: the total capacity of the battery in mAh + * @init_cap: the initial capacity of the battery in mAh + * @alarm_cap: the alarm capacity + * @init_clbcnt: the initial coulomb counter + * @max_volt: the maximum constant input voltage in millivolt + * @min_volt: the minimum drained battery voltage in microvolt + * @table_len: the capacity table length + * @cur_1000ma_adc: ADC value corresponding to 1000 mA + * @vol_1000mv_adc: ADC value corresponding to 1000 mV + * @cap_table: capacity table with corresponding ocv + */ +struct sc27xx_fgu_data { + struct regmap *regmap; + struct device *dev; + struct power_supply *battery; + u32 base; + struct mutex lock; + struct gpio_desc *gpiod; + struct iio_channel *channel; + bool bat_present; + int internal_resist; + int total_cap; + int init_cap; + int alarm_cap; + int init_clbcnt; + int max_volt; + int min_volt; + int table_len; + int cur_1000ma_adc; + int vol_1000mv_adc; + struct power_supply_battery_ocv_table *cap_table; +}; + +static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity); + +static const char * const sc27xx_charger_supply_name[] = { + "sc2731_charger", + "sc2720_charger", + "sc2721_charger", + "sc2723_charger", +}; + +static int sc27xx_fgu_adc_to_current(struct sc27xx_fgu_data *data, int adc) +{ + return DIV_ROUND_CLOSEST(adc * 1000, data->cur_1000ma_adc); +} + +static int sc27xx_fgu_adc_to_voltage(struct sc27xx_fgu_data *data, int adc) +{ + return DIV_ROUND_CLOSEST(adc * 1000, data->vol_1000mv_adc); +} + +static int sc27xx_fgu_voltage_to_adc(struct sc27xx_fgu_data *data, int vol) +{ + return DIV_ROUND_CLOSEST(vol * data->vol_1000mv_adc, 1000); +} + +static bool sc27xx_fgu_is_first_poweron(struct sc27xx_fgu_data *data) +{ + int ret, status, cap, mode; + + ret = regmap_read(data->regmap, + data->base + SC27XX_FGU_USER_AREA_STATUS, &status); + if (ret) + return false; + + /* + * We use low 4 bits to save the last battery capacity and high 12 bits + * to save the system boot mode. + */ + mode = (status & SC27XX_FGU_MODE_AREA_MASK) >> SC27XX_FGU_MODE_AREA_SHIFT; + cap = status & SC27XX_FGU_CAP_AREA_MASK; + + /* + * When FGU has been powered down, the user area registers became + * default value (0xffff), which can be used to valid if the system is + * first power on or not. + */ + if (mode == SC27XX_FGU_FIRST_POWERTON || cap == SC27XX_FGU_DEFAULT_CAP) + return true; + + return false; +} + +static int sc27xx_fgu_save_boot_mode(struct sc27xx_fgu_data *data, + int boot_mode) +{ + int ret; + + ret = regmap_update_bits(data->regmap, + data->base + SC27XX_FGU_USER_AREA_CLEAR, + SC27XX_FGU_MODE_AREA_MASK, + SC27XX_FGU_MODE_AREA_MASK); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, + data->base + SC27XX_FGU_USER_AREA_SET, + SC27XX_FGU_MODE_AREA_MASK, + boot_mode << SC27XX_FGU_MODE_AREA_SHIFT); +} + +static int sc27xx_fgu_save_last_cap(struct sc27xx_fgu_data *data, int cap) +{ + int ret; + + ret = regmap_update_bits(data->regmap, + data->base + SC27XX_FGU_USER_AREA_CLEAR, + SC27XX_FGU_CAP_AREA_MASK, + SC27XX_FGU_CAP_AREA_MASK); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, + data->base + SC27XX_FGU_USER_AREA_SET, + SC27XX_FGU_CAP_AREA_MASK, cap); +} + +static int sc27xx_fgu_read_last_cap(struct sc27xx_fgu_data *data, int *cap) +{ + int ret, value; + + ret = regmap_read(data->regmap, + data->base + SC27XX_FGU_USER_AREA_STATUS, &value); + if (ret) + return ret; + + *cap = value & SC27XX_FGU_CAP_AREA_MASK; + return 0; +} + +/* + * When system boots on, we can not read battery capacity from coulomb + * registers, since now the coulomb registers are invalid. So we should + * calculate the battery open circuit voltage, and get current battery + * capacity according to the capacity table. + */ +static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap) +{ + int volt, cur, oci, ocv, ret; + bool is_first_poweron = sc27xx_fgu_is_first_poweron(data); + + /* + * If system is not the first power on, we should use the last saved + * battery capacity as the initial battery capacity. Otherwise we should + * re-calculate the initial battery capacity. + */ + if (!is_first_poweron) { + ret = sc27xx_fgu_read_last_cap(data, cap); + if (ret) + return ret; + + return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON); + } + + /* + * After system booting on, the SC27XX_FGU_CLBCNT_QMAXL register saved + * the first sampled open circuit current. + */ + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_QMAXL, + &cur); + if (ret) + return ret; + + cur <<= 1; + oci = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC); + + /* + * Should get the OCV from SC27XX_FGU_POCV register at the system + * beginning. It is ADC values reading from registers which need to + * convert the corresponding voltage. + */ + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_POCV, &volt); + if (ret) + return ret; + + volt = sc27xx_fgu_adc_to_voltage(data, volt); + ocv = volt * 1000 - oci * data->internal_resist; + + /* + * Parse the capacity table to look up the correct capacity percent + * according to current battery's corresponding OCV values. + */ + *cap = power_supply_ocv2cap_simple(data->cap_table, data->table_len, + ocv); + + ret = sc27xx_fgu_save_last_cap(data, *cap); + if (ret) + return ret; + + return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON); +} + +static int sc27xx_fgu_set_clbcnt(struct sc27xx_fgu_data *data, int clbcnt) +{ + int ret; + + clbcnt *= SC27XX_FGU_SAMPLE_HZ; + + ret = regmap_update_bits(data->regmap, + data->base + SC27XX_FGU_CLBCNT_SETL, + SC27XX_FGU_CLBCNT_MASK, clbcnt); + if (ret) + return ret; + + ret = regmap_update_bits(data->regmap, + data->base + SC27XX_FGU_CLBCNT_SETH, + SC27XX_FGU_CLBCNT_MASK, + clbcnt >> SC27XX_FGU_CLBCNT_SHIFT); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, data->base + SC27XX_FGU_START, + SC27XX_WRITE_SELCLB_EN, + SC27XX_WRITE_SELCLB_EN); +} + +static int sc27xx_fgu_get_clbcnt(struct sc27xx_fgu_data *data, int *clb_cnt) +{ + int ccl, cch, ret; + + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_VALL, + &ccl); + if (ret) + return ret; + + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_VALH, + &cch); + if (ret) + return ret; + + *clb_cnt = ccl & SC27XX_FGU_CLBCNT_MASK; + *clb_cnt |= (cch & SC27XX_FGU_CLBCNT_MASK) << SC27XX_FGU_CLBCNT_SHIFT; + *clb_cnt /= SC27XX_FGU_SAMPLE_HZ; + + return 0; +} + +static int sc27xx_fgu_get_capacity(struct sc27xx_fgu_data *data, int *cap) +{ + int ret, cur_clbcnt, delta_clbcnt, delta_cap, temp; + + /* Get current coulomb counters firstly */ + ret = sc27xx_fgu_get_clbcnt(data, &cur_clbcnt); + if (ret) + return ret; + + delta_clbcnt = cur_clbcnt - data->init_clbcnt; + + /* + * Convert coulomb counter to delta capacity (mAh), and set multiplier + * as 100 to improve the precision. + */ + temp = DIV_ROUND_CLOSEST(delta_clbcnt, 360); + temp = sc27xx_fgu_adc_to_current(data, temp); + + /* + * Convert to capacity percent of the battery total capacity, + * and multiplier is 100 too. + */ + delta_cap = DIV_ROUND_CLOSEST(temp * 100, data->total_cap); + *cap = delta_cap + data->init_cap; + + return 0; +} + +static int sc27xx_fgu_get_vbat_vol(struct sc27xx_fgu_data *data, int *val) +{ + int ret, vol; + + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE, &vol); + if (ret) + return ret; + + /* + * It is ADC values reading from registers which need to convert to + * corresponding voltage values. + */ + *val = sc27xx_fgu_adc_to_voltage(data, vol); + + return 0; +} + +static int sc27xx_fgu_get_current(struct sc27xx_fgu_data *data, int *val) +{ + int ret, cur; + + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT, &cur); + if (ret) + return ret; + + /* + * It is ADC values reading from registers which need to convert to + * corresponding current values. + */ + *val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC); + + return 0; +} + +static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val) +{ + int vol, cur, ret; + + ret = sc27xx_fgu_get_vbat_vol(data, &vol); + if (ret) + return ret; + + ret = sc27xx_fgu_get_current(data, &cur); + if (ret) + return ret; + + /* Return the battery OCV in micro volts. */ + *val = vol * 1000 - cur * data->internal_resist; + + return 0; +} + +static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp) +{ + return iio_read_channel_processed(data->channel, temp); +} + +static int sc27xx_fgu_get_health(struct sc27xx_fgu_data *data, int *health) +{ + int ret, vol; + + ret = sc27xx_fgu_get_vbat_vol(data, &vol); + if (ret) + return ret; + + if (vol > data->max_volt) + *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else + *health = POWER_SUPPLY_HEALTH_GOOD; + + return 0; +} + +static int sc27xx_fgu_get_status(struct sc27xx_fgu_data *data, int *status) +{ + union power_supply_propval val; + struct power_supply *psy; + int i, ret = -EINVAL; + + for (i = 0; i < ARRAY_SIZE(sc27xx_charger_supply_name); i++) { + psy = power_supply_get_by_name(sc27xx_charger_supply_name[i]); + if (!psy) + continue; + + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS, + &val); + power_supply_put(psy); + if (ret) + return ret; + + *status = val.intval; + } + + return ret; +} + +static int sc27xx_fgu_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy); + int ret = 0; + int value; + + mutex_lock(&data->lock); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = sc27xx_fgu_get_status(data, &value); + if (ret) + goto error; + + val->intval = value; + break; + + case POWER_SUPPLY_PROP_HEALTH: + ret = sc27xx_fgu_get_health(data, &value); + if (ret) + goto error; + + val->intval = value; + break; + + case POWER_SUPPLY_PROP_PRESENT: + val->intval = data->bat_present; + break; + + case POWER_SUPPLY_PROP_TEMP: + ret = sc27xx_fgu_get_temp(data, &value); + if (ret) + goto error; + + val->intval = value; + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + + case POWER_SUPPLY_PROP_CAPACITY: + ret = sc27xx_fgu_get_capacity(data, &value); + if (ret) + goto error; + + val->intval = value; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = sc27xx_fgu_get_vbat_vol(data, &value); + if (ret) + goto error; + + val->intval = value * 1000; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_OCV: + ret = sc27xx_fgu_get_vbat_ocv(data, &value); + if (ret) + goto error; + + val->intval = value; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CURRENT_AVG: + ret = sc27xx_fgu_get_current(data, &value); + if (ret) + goto error; + + val->intval = value * 1000; + break; + + default: + ret = -EINVAL; + break; + } + +error: + mutex_unlock(&data->lock); + return ret; +} + +static int sc27xx_fgu_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy); + int ret; + + if (psp != POWER_SUPPLY_PROP_CAPACITY) + return -EINVAL; + + mutex_lock(&data->lock); + + ret = sc27xx_fgu_save_last_cap(data, val->intval); + + mutex_unlock(&data->lock); + + if (ret < 0) + dev_err(data->dev, "failed to save battery capacity\n"); + + return ret; +} + +static void sc27xx_fgu_external_power_changed(struct power_supply *psy) +{ + struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy); + + power_supply_changed(data->battery); +} + +static int sc27xx_fgu_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_CAPACITY; +} + +static enum power_supply_property sc27xx_fgu_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_OCV, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CURRENT_AVG, +}; + +static const struct power_supply_desc sc27xx_fgu_desc = { + .name = "sc27xx-fgu", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = sc27xx_fgu_props, + .num_properties = ARRAY_SIZE(sc27xx_fgu_props), + .get_property = sc27xx_fgu_get_property, + .set_property = sc27xx_fgu_set_property, + .external_power_changed = sc27xx_fgu_external_power_changed, + .property_is_writeable = sc27xx_fgu_property_is_writeable, +}; + +static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap) +{ + data->init_cap = cap; + data->init_clbcnt = sc27xx_fgu_cap_to_clbcnt(data, data->init_cap); +} + +static irqreturn_t sc27xx_fgu_interrupt(int irq, void *dev_id) +{ + struct sc27xx_fgu_data *data = dev_id; + int ret, cap, ocv, adc; + u32 status; + + mutex_lock(&data->lock); + + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_INT_STS, + &status); + if (ret) + goto out; + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_CLR, + status, status); + if (ret) + goto out; + + /* + * When low overload voltage interrupt happens, we should calibrate the + * battery capacity in lower voltage stage. + */ + if (!(status & SC27XX_FGU_LOW_OVERLOAD_INT)) + goto out; + + ret = sc27xx_fgu_get_capacity(data, &cap); + if (ret) + goto out; + + ret = sc27xx_fgu_get_vbat_ocv(data, &ocv); + if (ret) + goto out; + + /* + * If current OCV value is less than the minimum OCV value in OCV table, + * which means now battery capacity is 0%, and we should adjust the + * inititial capacity to 0. + */ + if (ocv <= data->cap_table[data->table_len - 1].ocv) { + sc27xx_fgu_adjust_cap(data, 0); + } else if (ocv <= data->min_volt) { + /* + * If current OCV value is less than the low alarm voltage, but + * current capacity is larger than the alarm capacity, we should + * adjust the inititial capacity to alarm capacity. + */ + if (cap > data->alarm_cap) { + sc27xx_fgu_adjust_cap(data, data->alarm_cap); + } else if (cap <= 0) { + int cur_cap; + + /* + * If current capacity is equal with 0 or less than 0 + * (some error occurs), we should adjust inititial + * capacity to the capacity corresponding to current OCV + * value. + */ + cur_cap = power_supply_ocv2cap_simple(data->cap_table, + data->table_len, + ocv); + sc27xx_fgu_adjust_cap(data, cur_cap); + } + + /* + * After adjusting the battery capacity, we should set the + * lowest alarm voltage instead. + */ + data->min_volt = data->cap_table[data->table_len - 1].ocv; + adc = sc27xx_fgu_voltage_to_adc(data, data->min_volt / 1000); + regmap_update_bits(data->regmap, data->base + SC27XX_FGU_LOW_OVERLOAD, + SC27XX_FGU_LOW_OVERLOAD_MASK, adc); + } + +out: + mutex_unlock(&data->lock); + + power_supply_changed(data->battery); + return IRQ_HANDLED; +} + +static irqreturn_t sc27xx_fgu_bat_detection(int irq, void *dev_id) +{ + struct sc27xx_fgu_data *data = dev_id; + int state; + + mutex_lock(&data->lock); + + state = gpiod_get_value_cansleep(data->gpiod); + if (state < 0) { + dev_err(data->dev, "failed to get gpio state\n"); + mutex_unlock(&data->lock); + return IRQ_RETVAL(state); + } + + data->bat_present = !!state; + + mutex_unlock(&data->lock); + + power_supply_changed(data->battery); + return IRQ_HANDLED; +} + +static void sc27xx_fgu_disable(void *_data) +{ + struct sc27xx_fgu_data *data = _data; + + regmap_update_bits(data->regmap, SC27XX_CLK_EN0, SC27XX_FGU_RTC_EN, 0); + regmap_update_bits(data->regmap, SC27XX_MODULE_EN0, SC27XX_FGU_EN, 0); +} + +static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity) +{ + /* + * Get current capacity (mAh) = battery total capacity (mAh) * + * current capacity percent (capacity / 100). + */ + int cur_cap = DIV_ROUND_CLOSEST(data->total_cap * capacity, 100); + + /* + * Convert current capacity (mAh) to coulomb counter according to the + * formula: 1 mAh =3.6 coulomb. + */ + return DIV_ROUND_CLOSEST(cur_cap * 36, 10); +} + +static int sc27xx_fgu_calibration(struct sc27xx_fgu_data *data) +{ + struct nvmem_cell *cell; + int calib_data, cal_4200mv; + void *buf; + size_t len; + + cell = nvmem_cell_get(data->dev, "fgu_calib"); + if (IS_ERR(cell)) + return PTR_ERR(cell); + + buf = nvmem_cell_read(cell, &len); + nvmem_cell_put(cell); + + if (IS_ERR(buf)) + return PTR_ERR(buf); + + memcpy(&calib_data, buf, min(len, sizeof(u32))); + + /* + * Get the ADC value corresponding to 4200 mV from eFuse controller + * according to below formula. Then convert to ADC values corresponding + * to 1000 mV and 1000 mA. + */ + cal_4200mv = (calib_data & 0x1ff) + 6963 - 4096 - 256; + data->vol_1000mv_adc = DIV_ROUND_CLOSEST(cal_4200mv * 10, 42); + data->cur_1000ma_adc = data->vol_1000mv_adc * 4; + + kfree(buf); + return 0; +} + +static int sc27xx_fgu_hw_init(struct sc27xx_fgu_data *data) +{ + struct power_supply_battery_info info = { }; + struct power_supply_battery_ocv_table *table; + int ret, delta_clbcnt, alarm_adc; + + ret = power_supply_get_battery_info(data->battery, &info); + if (ret) { + dev_err(data->dev, "failed to get battery information\n"); + return ret; + } + + data->total_cap = info.charge_full_design_uah / 1000; + data->max_volt = info.constant_charge_voltage_max_uv / 1000; + data->internal_resist = info.factory_internal_resistance_uohm / 1000; + data->min_volt = info.voltage_min_design_uv; + + /* + * For SC27XX fuel gauge device, we only use one ocv-capacity + * table in normal temperature 20 Celsius. + */ + table = power_supply_find_ocv2cap_table(&info, 20, &data->table_len); + if (!table) + return -EINVAL; + + data->cap_table = devm_kmemdup(data->dev, table, + data->table_len * sizeof(*table), + GFP_KERNEL); + if (!data->cap_table) { + power_supply_put_battery_info(data->battery, &info); + return -ENOMEM; + } + + data->alarm_cap = power_supply_ocv2cap_simple(data->cap_table, + data->table_len, + data->min_volt); + + power_supply_put_battery_info(data->battery, &info); + + ret = sc27xx_fgu_calibration(data); + if (ret) + return ret; + + /* Enable the FGU module */ + ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN0, + SC27XX_FGU_EN, SC27XX_FGU_EN); + if (ret) { + dev_err(data->dev, "failed to enable fgu\n"); + return ret; + } + + /* Enable the FGU RTC clock to make it work */ + ret = regmap_update_bits(data->regmap, SC27XX_CLK_EN0, + SC27XX_FGU_RTC_EN, SC27XX_FGU_RTC_EN); + if (ret) { + dev_err(data->dev, "failed to enable fgu RTC clock\n"); + goto disable_fgu; + } + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_CLR, + SC27XX_FGU_INT_MASK, SC27XX_FGU_INT_MASK); + if (ret) { + dev_err(data->dev, "failed to clear interrupt status\n"); + goto disable_clk; + } + + /* + * Set the voltage low overload threshold, which means when the battery + * voltage is lower than this threshold, the controller will generate + * one interrupt to notify. + */ + alarm_adc = sc27xx_fgu_voltage_to_adc(data, data->min_volt / 1000); + ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_LOW_OVERLOAD, + SC27XX_FGU_LOW_OVERLOAD_MASK, alarm_adc); + if (ret) { + dev_err(data->dev, "failed to set fgu low overload\n"); + goto disable_clk; + } + + /* + * Set the coulomb counter delta threshold, that means when the coulomb + * counter change is multiples of the delta threshold, the controller + * will generate one interrupt to notify the users to update the battery + * capacity. Now we set the delta threshold as a counter value of 1% + * capacity. + */ + delta_clbcnt = sc27xx_fgu_cap_to_clbcnt(data, 1); + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_CLBCNT_DELTL, + SC27XX_FGU_CLBCNT_MASK, delta_clbcnt); + if (ret) { + dev_err(data->dev, "failed to set low delta coulomb counter\n"); + goto disable_clk; + } + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_CLBCNT_DELTH, + SC27XX_FGU_CLBCNT_MASK, + delta_clbcnt >> SC27XX_FGU_CLBCNT_SHIFT); + if (ret) { + dev_err(data->dev, "failed to set high delta coulomb counter\n"); + goto disable_clk; + } + + /* + * Get the boot battery capacity when system powers on, which is used to + * initialize the coulomb counter. After that, we can read the coulomb + * counter to measure the battery capacity. + */ + ret = sc27xx_fgu_get_boot_capacity(data, &data->init_cap); + if (ret) { + dev_err(data->dev, "failed to get boot capacity\n"); + goto disable_clk; + } + + /* + * Convert battery capacity to the corresponding initial coulomb counter + * and set into coulomb counter registers. + */ + data->init_clbcnt = sc27xx_fgu_cap_to_clbcnt(data, data->init_cap); + ret = sc27xx_fgu_set_clbcnt(data, data->init_clbcnt); + if (ret) { + dev_err(data->dev, "failed to initialize coulomb counter\n"); + goto disable_clk; + } + + return 0; + +disable_clk: + regmap_update_bits(data->regmap, SC27XX_CLK_EN0, SC27XX_FGU_RTC_EN, 0); +disable_fgu: + regmap_update_bits(data->regmap, SC27XX_MODULE_EN0, SC27XX_FGU_EN, 0); + + return ret; +} + +static int sc27xx_fgu_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct power_supply_config fgu_cfg = { }; + struct sc27xx_fgu_data *data; + int ret, irq; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!data->regmap) { + dev_err(&pdev->dev, "failed to get regmap\n"); + return -ENODEV; + } + + ret = device_property_read_u32(&pdev->dev, "reg", &data->base); + if (ret) { + dev_err(&pdev->dev, "failed to get fgu address\n"); + return ret; + } + + data->channel = devm_iio_channel_get(&pdev->dev, "bat-temp"); + if (IS_ERR(data->channel)) { + dev_err(&pdev->dev, "failed to get IIO channel\n"); + return PTR_ERR(data->channel); + } + + data->gpiod = devm_gpiod_get(&pdev->dev, "bat-detect", GPIOD_IN); + if (IS_ERR(data->gpiod)) { + dev_err(&pdev->dev, "failed to get battery detection GPIO\n"); + return PTR_ERR(data->gpiod); + } + + ret = gpiod_get_value_cansleep(data->gpiod); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get gpio state\n"); + return ret; + } + + data->bat_present = !!ret; + mutex_init(&data->lock); + data->dev = &pdev->dev; + platform_set_drvdata(pdev, data); + + fgu_cfg.drv_data = data; + fgu_cfg.of_node = np; + data->battery = devm_power_supply_register(&pdev->dev, &sc27xx_fgu_desc, + &fgu_cfg); + if (IS_ERR(data->battery)) { + dev_err(&pdev->dev, "failed to register power supply\n"); + return PTR_ERR(data->battery); + } + + ret = sc27xx_fgu_hw_init(data); + if (ret) { + dev_err(&pdev->dev, "failed to initialize fgu hardware\n"); + return ret; + } + + ret = devm_add_action(&pdev->dev, sc27xx_fgu_disable, data); + if (ret) { + sc27xx_fgu_disable(data); + dev_err(&pdev->dev, "failed to add fgu disable action\n"); + return ret; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq resource specified\n"); + return irq; + } + + ret = devm_request_threaded_irq(data->dev, irq, NULL, + sc27xx_fgu_interrupt, + IRQF_NO_SUSPEND | IRQF_ONESHOT, + pdev->name, data); + if (ret) { + dev_err(data->dev, "failed to request fgu IRQ\n"); + return ret; + } + + irq = gpiod_to_irq(data->gpiod); + if (irq < 0) { + dev_err(&pdev->dev, "failed to translate GPIO to IRQ\n"); + return irq; + } + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + sc27xx_fgu_bat_detection, + IRQF_ONESHOT | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + pdev->name, data); + if (ret) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + return ret; + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sc27xx_fgu_resume(struct device *dev) +{ + struct sc27xx_fgu_data *data = dev_get_drvdata(dev); + int ret; + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN, + SC27XX_FGU_LOW_OVERLOAD_INT | + SC27XX_FGU_CLBCNT_DELTA_INT, 0); + if (ret) { + dev_err(data->dev, "failed to disable fgu interrupts\n"); + return ret; + } + + return 0; +} + +static int sc27xx_fgu_suspend(struct device *dev) +{ + struct sc27xx_fgu_data *data = dev_get_drvdata(dev); + int ret, status, ocv; + + ret = sc27xx_fgu_get_status(data, &status); + if (ret) + return ret; + + /* + * If we are charging, then no need to enable the FGU interrupts to + * adjust the battery capacity. + */ + if (status != POWER_SUPPLY_STATUS_NOT_CHARGING) + return 0; + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN, + SC27XX_FGU_LOW_OVERLOAD_INT, + SC27XX_FGU_LOW_OVERLOAD_INT); + if (ret) { + dev_err(data->dev, "failed to enable low voltage interrupt\n"); + return ret; + } + + ret = sc27xx_fgu_get_vbat_ocv(data, &ocv); + if (ret) + goto disable_int; + + /* + * If current OCV is less than the minimum voltage, we should enable the + * coulomb counter threshold interrupt to notify events to adjust the + * battery capacity. + */ + if (ocv < data->min_volt) { + ret = regmap_update_bits(data->regmap, + data->base + SC27XX_FGU_INT_EN, + SC27XX_FGU_CLBCNT_DELTA_INT, + SC27XX_FGU_CLBCNT_DELTA_INT); + if (ret) { + dev_err(data->dev, + "failed to enable coulomb threshold int\n"); + goto disable_int; + } + } + + return 0; + +disable_int: + regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN, + SC27XX_FGU_LOW_OVERLOAD_INT, 0); + return ret; +} +#endif + +static const struct dev_pm_ops sc27xx_fgu_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sc27xx_fgu_suspend, sc27xx_fgu_resume) +}; + +static const struct of_device_id sc27xx_fgu_of_match[] = { + { .compatible = "sprd,sc2731-fgu", }, + { } +}; + +static struct platform_driver sc27xx_fgu_driver = { + .probe = sc27xx_fgu_probe, + .driver = { + .name = "sc27xx-fgu", + .of_match_table = sc27xx_fgu_of_match, + .pm = &sc27xx_fgu_pm_ops, + } +}; + +module_platform_driver(sc27xx_fgu_driver); + +MODULE_DESCRIPTION("Spreadtrum SC27XX PMICs Fual Gauge Unit Driver"); +MODULE_LICENSE("GPL v2"); |