diff options
Diffstat (limited to 'drivers/power/supply/axp20x_battery.c')
| -rw-r--r-- | drivers/power/supply/axp20x_battery.c | 52 |
1 files changed, 36 insertions, 16 deletions
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c index f71cc90fea12..88fbae613e8b 100644 --- a/drivers/power/supply/axp20x_battery.c +++ b/drivers/power/supply/axp20x_battery.c @@ -89,6 +89,8 @@ #define AXP717_BAT_CC_MIN_UA 0 #define AXP717_BAT_CC_MAX_UA 3008000 +#define AXP717_TS_PIN_DISABLE BIT(4) + struct axp20x_batt_ps; struct axp_data { @@ -117,6 +119,7 @@ struct axp20x_batt_ps { /* Maximum constant charge current */ unsigned int max_ccc; const struct axp_data *data; + bool ts_disable; }; static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, @@ -466,10 +469,9 @@ static int axp717_battery_get_prop(struct power_supply *psy, /* * If a fault is detected it must also be cleared; if the - * condition persists it should reappear (This is an - * assumption, it's actually not documented). A restart was - * not sufficient to clear the bit in testing despite the - * register listed as POR. + * condition persists it should reappear. A restart was not + * sufficient to clear the bit in testing despite the register + * listed as POR. */ case POWER_SUPPLY_PROP_HEALTH: ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_FAULT, @@ -480,26 +482,26 @@ static int axp717_battery_get_prop(struct power_supply *psy, switch (reg & AXP717_BATT_PMU_FAULT_MASK) { case AXP717_BATT_UVLO_2_5V: val->intval = POWER_SUPPLY_HEALTH_DEAD; - regmap_update_bits(axp20x_batt->regmap, - AXP717_PMU_FAULT, - AXP717_BATT_UVLO_2_5V, - AXP717_BATT_UVLO_2_5V); + regmap_write_bits(axp20x_batt->regmap, + AXP717_PMU_FAULT, + AXP717_BATT_UVLO_2_5V, + AXP717_BATT_UVLO_2_5V); return 0; case AXP717_BATT_OVER_TEMP: val->intval = POWER_SUPPLY_HEALTH_HOT; - regmap_update_bits(axp20x_batt->regmap, - AXP717_PMU_FAULT, - AXP717_BATT_OVER_TEMP, - AXP717_BATT_OVER_TEMP); + regmap_write_bits(axp20x_batt->regmap, + AXP717_PMU_FAULT, + AXP717_BATT_OVER_TEMP, + AXP717_BATT_OVER_TEMP); return 0; case AXP717_BATT_UNDER_TEMP: val->intval = POWER_SUPPLY_HEALTH_COLD; - regmap_update_bits(axp20x_batt->regmap, - AXP717_PMU_FAULT, - AXP717_BATT_UNDER_TEMP, - AXP717_BATT_UNDER_TEMP); + regmap_write_bits(axp20x_batt->regmap, + AXP717_PMU_FAULT, + AXP717_BATT_UNDER_TEMP, + AXP717_BATT_UNDER_TEMP); return 0; default: @@ -984,6 +986,24 @@ static void axp717_set_battery_info(struct platform_device *pdev, int ccc = info->constant_charge_current_max_ua; int val; + axp_batt->ts_disable = (device_property_read_bool(axp_batt->dev, + "x-powers,no-thermistor")); + + /* + * Under rare conditions an incorrectly programmed efuse for + * the temp sensor on the PMIC may trigger a fault condition. + * Allow users to hard-code if the ts pin is not used to work + * around this problem. Note that this requires the battery + * be correctly defined in the device tree with a monitored + * battery node. + */ + if (axp_batt->ts_disable) { + regmap_update_bits(axp_batt->regmap, + AXP717_TS_PIN_CFG, + AXP717_TS_PIN_DISABLE, + AXP717_TS_PIN_DISABLE); + } + if (vmin > 0 && axp717_set_voltage_min_design(axp_batt, vmin)) dev_err(&pdev->dev, "couldn't set voltage_min_design\n"); |