diff options
Diffstat (limited to 'drivers/pinctrl/sunxi/pinctrl-sunxi.h')
| -rw-r--r-- | drivers/pinctrl/sunxi/pinctrl-sunxi.h | 109 |
1 files changed, 20 insertions, 89 deletions
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h index a32bb5bcb754..a87a2f944d60 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h @@ -36,23 +36,19 @@ #define BANK_MEM_SIZE 0x24 #define MUX_REGS_OFFSET 0x0 +#define MUX_FIELD_WIDTH 4 #define DATA_REGS_OFFSET 0x10 +#define DATA_FIELD_WIDTH 1 #define DLEVEL_REGS_OFFSET 0x14 +#define DLEVEL_FIELD_WIDTH 2 #define PULL_REGS_OFFSET 0x1c +#define PULL_FIELD_WIDTH 2 + +#define D1_BANK_MEM_SIZE 0x30 +#define D1_DLEVEL_FIELD_WIDTH 4 +#define D1_PULL_REGS_OFFSET 0x24 #define PINS_PER_BANK 32 -#define MUX_PINS_PER_REG 8 -#define MUX_PINS_BITS 4 -#define MUX_PINS_MASK 0x0f -#define DATA_PINS_PER_REG 32 -#define DATA_PINS_BITS 1 -#define DATA_PINS_MASK 0x01 -#define DLEVEL_PINS_PER_REG 16 -#define DLEVEL_PINS_BITS 2 -#define DLEVEL_PINS_MASK 0x03 -#define PULL_PINS_PER_REG 16 -#define PULL_PINS_BITS 2 -#define PULL_PINS_MASK 0x03 #define IRQ_PER_BANK 32 @@ -96,8 +92,11 @@ #define PINCTRL_SUN8I_R40 BIT(8) #define PINCTRL_SUN8I_V3 BIT(9) #define PINCTRL_SUN8I_V3S BIT(10) +/* Variants below here have an updated register layout. */ +#define PINCTRL_SUN20I_D1 BIT(11) #define PIO_POW_MOD_SEL_REG 0x340 +#define PIO_POW_MOD_CTL_REG 0x344 enum sunxi_desc_bias_voltage { BIAS_VOLTAGE_NONE, @@ -111,6 +110,12 @@ enum sunxi_desc_bias_voltage { * register, as seen on H6 SoC, for example. */ BIAS_VOLTAGE_PIO_POW_MODE_SEL, + /* + * Bias voltage is set through PIO_POW_MOD_SEL_REG + * and PIO_POW_MOD_CTL_REG register, as seen on + * A100 and D1 SoC, for example. + */ + BIAS_VOLTAGE_PIO_POW_MODE_CTL, }; struct sunxi_desc_function { @@ -170,6 +175,9 @@ struct sunxi_pinctrl { raw_spinlock_t lock; struct pinctrl_dev *pctl_dev; unsigned long variant; + u32 bank_mem_size; + u32 pull_regs_offset; + u32 dlevel_field_width; }; #define SUNXI_PIN(_pin, ...) \ @@ -215,83 +223,6 @@ struct sunxi_pinctrl { .irqnum = _irq, \ } -/* - * The sunXi PIO registers are organized as is: - * 0x00 - 0x0c Muxing values. - * 8 pins per register, each pin having a 4bits value - * 0x10 Pin values - * 32 bits per register, each pin corresponding to one bit - * 0x14 - 0x18 Drive level - * 16 pins per register, each pin having a 2bits value - * 0x1c - 0x20 Pull-Up values - * 16 pins per register, each pin having a 2bits value - * - * This is for the first bank. Each bank will have the same layout, - * with an offset being a multiple of 0x24. - * - * The following functions calculate from the pin number the register - * and the bit offset that we should access. - */ -static inline u32 sunxi_mux_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += MUX_REGS_OFFSET; - offset += pin % PINS_PER_BANK / MUX_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_mux_offset(u16 pin) -{ - u32 pin_num = pin % MUX_PINS_PER_REG; - return pin_num * MUX_PINS_BITS; -} - -static inline u32 sunxi_data_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += DATA_REGS_OFFSET; - offset += pin % PINS_PER_BANK / DATA_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_data_offset(u16 pin) -{ - u32 pin_num = pin % DATA_PINS_PER_REG; - return pin_num * DATA_PINS_BITS; -} - -static inline u32 sunxi_dlevel_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += DLEVEL_REGS_OFFSET; - offset += pin % PINS_PER_BANK / DLEVEL_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_dlevel_offset(u16 pin) -{ - u32 pin_num = pin % DLEVEL_PINS_PER_REG; - return pin_num * DLEVEL_PINS_BITS; -} - -static inline u32 sunxi_pull_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += PULL_REGS_OFFSET; - offset += pin % PINS_PER_BANK / PULL_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_pull_offset(u16 pin) -{ - u32 pin_num = pin % PULL_PINS_PER_REG; - return pin_num * PULL_PINS_BITS; -} - static inline u32 sunxi_irq_hw_bank_num(const struct sunxi_pinctrl_desc *desc, u8 bank) { if (!desc->irq_bank_map) |