summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-equilibrium.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/pinctrl-equilibrium.h')
-rw-r--r--drivers/pinctrl/pinctrl-equilibrium.h144
1 files changed, 144 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-equilibrium.h b/drivers/pinctrl/pinctrl-equilibrium.h
new file mode 100644
index 000000000000..83cb7dafc657
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-equilibrium.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright(c) 2019 Intel Corporation.
+ */
+
+#ifndef __PINCTRL_EQUILIBRIUM_H
+#define __PINCTRL_EQUILIBRIUM_H
+
+/* PINPAD register offset */
+#define REG_PMX_BASE 0x0 /* Port Multiplexer Control Register */
+#define REG_PUEN 0x80 /* PULL UP Enable Register */
+#define REG_PDEN 0x84 /* PULL DOWN Enable Register */
+#define REG_SRC 0x88 /* Slew Rate Control Register */
+#define REG_DCC0 0x8C /* Drive Current Control Register 0 */
+#define REG_DCC1 0x90 /* Drive Current Control Register 1 */
+#define REG_OD 0x94 /* Open Drain Enable Register */
+#define REG_AVAIL 0x98 /* Pad Control Availability Register */
+#define DRV_CUR_PINS 16 /* Drive Current pin number per register */
+#define REG_DRCC(x) (REG_DCC0 + (x) * 4) /* Driver current macro */
+
+/* GPIO register offset */
+#define GPIO_OUT 0x0 /* Data Output Register */
+#define GPIO_IN 0x4 /* Data Input Register */
+#define GPIO_DIR 0x8 /* Direction Register */
+#define GPIO_EXINTCR0 0x18 /* External Interrupt Control Register 0 */
+#define GPIO_EXINTCR1 0x1C /* External Interrupt Control Register 1 */
+#define GPIO_IRNCR 0x20 /* IRN Capture Register */
+#define GPIO_IRNICR 0x24 /* IRN Interrupt Control Register */
+#define GPIO_IRNEN 0x28 /* IRN Interrupt Enable Register */
+#define GPIO_IRNCFG 0x2C /* IRN Interrupt Configuration Register */
+#define GPIO_IRNRNSET 0x30 /* IRN Interrupt Enable Set Register */
+#define GPIO_IRNENCLR 0x34 /* IRN Interrupt Enable Clear Register */
+#define GPIO_OUTSET 0x40 /* Output Set Register */
+#define GPIO_OUTCLR 0x44 /* Output Clear Register */
+#define GPIO_DIRSET 0x48 /* Direction Set Register */
+#define GPIO_DIRCLR 0x4C /* Direction Clear Register */
+
+/* parse given pin's driver current value */
+#define PARSE_DRV_CURRENT(val, pin) (((val) >> ((pin) * 2)) & 0x3)
+
+#define GPIO_EDGE_TRIG 0
+#define GPIO_LEVEL_TRIG 1
+#define GPIO_SINGLE_EDGE 0
+#define GPIO_BOTH_EDGE 1
+#define GPIO_POSITIVE_TRIG 0
+#define GPIO_NEGATIVE_TRIG 1
+
+#define EQBR_GPIO_MODE 0
+
+typedef enum {
+ OP_COUNT_NR_FUNCS,
+ OP_ADD_FUNCS,
+ OP_COUNT_NR_FUNC_GRPS,
+ OP_ADD_FUNC_GRPS,
+ OP_NONE,
+} funcs_util_ops;
+
+/**
+ * struct gpio_irq_type: gpio irq configuration
+ * @trig_type: level trigger or edge trigger
+ * @edge_type: sigle edge or both edge
+ * @logic_type: positive trigger or negative trigger
+ */
+struct gpio_irq_type {
+ unsigned int trig_type;
+ unsigned int edge_type;
+ unsigned int logic_type;
+};
+
+/**
+ * struct eqbr_pmx_func: represent a pin function.
+ * @name: name of the pin function, used to lookup the function.
+ * @groups: one or more names of pin groups that provide this function.
+ * @nr_groups: number of groups included in @groups.
+ */
+struct eqbr_pmx_func {
+ const char *name;
+ const char **groups;
+ unsigned int nr_groups;
+};
+
+/**
+ * struct eqbr_pin_bank: represent a pin bank.
+ * @membase: base address of the pin bank register.
+ * @id: bank id, to idenify the unique bank.
+ * @pin_base: starting pin number of the pin bank.
+ * @nr_pins: number of the pins of the pin bank.
+ * @aval_pinmap: available pin bitmap of the pin bank.
+ */
+struct eqbr_pin_bank {
+ void __iomem *membase;
+ unsigned int id;
+ unsigned int pin_base;
+ unsigned int nr_pins;
+ u32 aval_pinmap;
+};
+
+/**
+ * struct eqbr_gpio_ctrl: represent a gpio controller.
+ * @node: device node of gpio controller.
+ * @bank: pointer to corresponding pin bank.
+ * @membase: base address of the gpio controller.
+ * @chip: gpio chip.
+ * @ic: irq chip.
+ * @name: gpio chip name.
+ * @virq: irq number of the gpio chip to parent's irq domain.
+ * @lock: spin lock to protect gpio register write.
+ */
+struct eqbr_gpio_ctrl {
+ struct device_node *node;
+ struct eqbr_pin_bank *bank;
+ void __iomem *membase;
+ struct gpio_chip chip;
+ struct irq_chip ic;
+ const char *name;
+ unsigned int virq;
+ raw_spinlock_t lock; /* protect gpio register */
+};
+
+/**
+ * struct eqbr_pinctrl_drv_data:
+ * @dev: device instance representing the controller.
+ * @pctl_desc: pin controller descriptor.
+ * @pctl_dev: pin control class device
+ * @membase: base address of pin controller
+ * @pin_banks: list of pin banks of the driver.
+ * @nr_banks: number of pin banks.
+ * @gpio_ctrls: list of gpio controllers.
+ * @nr_gpio_ctrls: number of gpio controllers.
+ * @lock: protect pinctrl register write
+ */
+struct eqbr_pinctrl_drv_data {
+ struct device *dev;
+ struct pinctrl_desc pctl_desc;
+ struct pinctrl_dev *pctl_dev;
+ void __iomem *membase;
+ struct eqbr_pin_bank *pin_banks;
+ unsigned int nr_banks;
+ struct eqbr_gpio_ctrl *gpio_ctrls;
+ unsigned int nr_gpio_ctrls;
+ raw_spinlock_t lock; /* protect pinpad register */
+};
+
+#endif /* __PINCTRL_EQUILIBRIUM_H */