diff options
Diffstat (limited to 'drivers/phy/Kconfig')
| -rw-r--r-- | drivers/phy/Kconfig | 491 |
1 files changed, 11 insertions, 480 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index afaf7b643eeb..01009b2a7d74 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,73 +15,6 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. -config PHY_BCM_NS_USB2 - tristate "Broadcom Northstar USB 2.0 PHY Driver" - depends on ARCH_BCM_IPROC || COMPILE_TEST - depends on HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support Broadcom USB 2.0 PHY connected to the USB - controller on Northstar family. - -config PHY_BCM_NS_USB3 - tristate "Broadcom Northstar USB 3.0 PHY Driver" - depends on ARCH_BCM_IPROC || COMPILE_TEST - depends on HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support Broadcom USB 3.0 PHY connected to the USB - controller on Northstar family. - -config PHY_BERLIN_USB - tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support the USB PHY on Marvell Berlin SoCs. - -config PHY_BERLIN_SATA - tristate "Marvell Berlin SATA PHY driver" - depends on ARCH_BERLIN && HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support the SATA PHY on Marvell Berlin SoCs. - -config ARMADA375_USBCLUSTER_PHY - def_bool y - depends on MACH_ARMADA_375 || COMPILE_TEST - depends on OF && HAS_IOMEM - select GENERIC_PHY - -config PHY_DA8XX_USB - tristate "TI DA8xx USB PHY Driver" - depends on ARCH_DAVINCI_DA8XX - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the USB PHY on DA8xx SoCs. - - This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. - -config PHY_DM816X_USB - tristate "TI dm816x USB PHY driver" - depends on ARCH_OMAP2PLUS - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - help - Enable this for dm816x USB to work. - -config PHY_EXYNOS_MIPI_VIDEO - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" - depends on HAS_IOMEM - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST - select GENERIC_PHY - default y if ARCH_S5PV210 || ARCH_EXYNOS - help - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P - and EXYNOS SoCs. - config PHY_LPC18XX_USB_OTG tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) @@ -93,146 +26,6 @@ config PHY_LPC18XX_USB_OTG This driver is need for USB0 support on LPC18xx/43xx and takes care of enabling and clock setup. -config PHY_PXA_28NM_HSIC - tristate "Marvell USB HSIC 28nm PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support Marvell USB HSIC PHY driver for Marvell - SoC. This driver will do the PHY initialization and shutdown. - The PHY driver will be used by Marvell ehci driver. - - To compile this driver as a module, choose M here. - -config PHY_PXA_28NM_USB2 - tristate "Marvell USB 2.0 28nm PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support Marvell USB 2.0 PHY driver for Marvell - SoC. This driver will do the PHY initialization and shutdown. - The PHY driver will be used by Marvell udc/ehci/otg driver. - - To compile this driver as a module, choose M here. - -config PHY_MVEBU_SATA - def_bool y - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD - depends on OF - select GENERIC_PHY - -config PHY_MIPHY28LP - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" - depends on ARCH_STI - select GENERIC_PHY - help - Enable this to support the miphy transceiver (for SATA/PCIE/USB3) - that is part of STMicroelectronics STiH407 SoC. - -config PHY_RCAR_GEN2 - tristate "Renesas R-Car generation 2 USB PHY driver" - depends on ARCH_RENESAS - depends on GENERIC_PHY - help - Support for USB PHY found on Renesas R-Car generation 2 SoCs. - -config PHY_RCAR_GEN3_USB2 - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" - depends on ARCH_RENESAS - depends on EXTCON - select GENERIC_PHY - help - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. - -config OMAP_CONTROL_PHY - tristate "OMAP CONTROL PHY Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - help - Enable this to add support for the PHY part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY/SATA PHY/PCIE PHY - (PIPE3 PHY). - -config OMAP_USB2 - tristate "OMAP USB2 PHY Driver" - depends on ARCH_OMAP2PLUS - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP - help - Enable this to support the transceiver that is part of SOC. This - driver takes care of all the PHY functionality apart from comparator. - The USB OTG controller communicates with the comparator using this - driver. - -config TI_PIPE3 - tristate "TI PIPE3 PHY Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - select GENERIC_PHY - select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP - help - Enable this to support the PIPE3 PHY that is part of TI SOCs. This - driver takes care of all the PHY functionality apart from comparator. - This driver interacts with the "OMAP Control PHY Driver" to power - on/off the PHY. - -config TWL4030_USB - tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - depends on USB_SUPPORT - depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' - select GENERIC_PHY - select USB_PHY - help - Enable this to support the USB OTG transceiver on TWL4030 - family chips (including the TWL5030 and TPS659x0 devices). - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config PHY_EXYNOS_DP_VIDEO - tristate "EXYNOS SoC series Display Port PHY driver" - depends on OF - depends on ARCH_EXYNOS || COMPILE_TEST - default ARCH_EXYNOS - select GENERIC_PHY - help - Support for Display Port PHY found on Samsung EXYNOS SoCs. - -config BCM_KONA_USB2_PHY - tristate "Broadcom Kona USB2 PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support the Broadcom Kona USB 2.0 PHY. - -config PHY_EXYNOS5250_SATA - tristate "Exynos5250 Sata SerDes/PHY driver" - depends on SOC_EXYNOS5250 - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - select I2C - select I2C_S3C2410 - select MFD_SYSCON - help - Enable this to support SATA SerDes/Phy found on Samsung's - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host - port to accept one SATA device. - -config PHY_HIX5HD2_SATA - tristate "HIX5HD2 SATA PHY Driver" - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM - select GENERIC_PHY - select MFD_SYSCON - help - Support for SATA PHY on Hisilicon hix5hd2 Soc. - config PHY_MT65XX_USB3 tristate "Mediatek USB3.0 PHY Driver" depends on ARCH_MEDIATEK && OF @@ -241,104 +34,6 @@ config PHY_MT65XX_USB3 Say 'Y' here to add support for Mediatek USB3.0 PHY driver, it supports multiple usb2.0 and usb3.0 ports. -config PHY_HI6220_USB - tristate "hi6220 USB PHY support" - depends on (ARCH_HISI && ARM64) || COMPILE_TEST - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the HISILICON HI6220 USB PHY. - - To compile this driver as a module, choose M here. - -config PHY_SUN4I_USB - tristate "Allwinner sunxi SoC USB PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF - depends on RESET_CONTROLLER - depends on EXTCON - depends on POWER_SUPPLY - depends on USB_SUPPORT - select GENERIC_PHY - select USB_COMMON - help - Enable this to support the transceiver that is part of Allwinner - sunxi SoCs. - - This driver controls the entire USB PHY block, both the USB OTG - parts, as well as the 2 regular USB 2 host PHYs. - -config PHY_SUN9I_USB - tristate "Allwinner sun9i SoC USB PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF - depends on RESET_CONTROLLER - depends on USB_SUPPORT - select USB_COMMON - select GENERIC_PHY - help - Enable this to support the transceiver that is part of Allwinner - sun9i SoCs. - - This driver controls each individual USB 2 host PHY. - -config PHY_SAMSUNG_USB2 - tristate "Samsung USB 2.0 PHY driver" - depends on HAS_IOMEM - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 - select GENERIC_PHY - select MFD_SYSCON - default ARCH_EXYNOS - help - Enable this to support the Samsung USB 2.0 PHY driver for Samsung - SoCs. This driver provides the interface for USB 2.0 PHY. Support - for particular PHYs will be enabled based on the SoC type in addition - to this driver. - -config PHY_S5PV210_USB2 - bool "Support for S5PV210" - depends on PHY_SAMSUNG_USB2 - depends on ARCH_S5PV210 - help - Enable USB PHY support for S5PV210. This option requires that Samsung - USB 2.0 PHY driver is enabled and means that support for this - particular SoC is compiled in the driver. In case of S5PV210 two phys - are available - device and host. - -config PHY_EXYNOS4210_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default CPU_EXYNOS4210 - -config PHY_EXYNOS4X12_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 - -config PHY_EXYNOS5250_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS5250 || SOC_EXYNOS5420 - -config PHY_EXYNOS5_USBDRD - tristate "Exynos5 SoC series USB DRD PHY driver" - depends on ARCH_EXYNOS && OF - depends on HAS_IOMEM - depends on USB_DWC3_EXYNOS - select GENERIC_PHY - select MFD_SYSCON - default y - help - Enable USB DRD PHY support for Exynos 5 SoC series. - This driver provides PHY interface for USB 3.0 DRD controller - present on Exynos5 SoC series. - -config PHY_EXYNOS_PCIE - bool "Exynos PCIe PHY driver" - depends on OF && (ARCH_EXYNOS || COMPILE_TEST) - select GENERIC_PHY - help - Enable PCIe PHY support for Exynos SoC series. - This driver provides PHY interface for Exynos PCIe controller. - config PHY_PISTACHIO_USB tristate "IMG Pistachio USB2.0 PHY driver" depends on MACH_PISTACHIO @@ -346,83 +41,6 @@ config PHY_PISTACHIO_USB help Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. -config PHY_QCOM_APQ8064_SATA - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" - depends on ARCH_QCOM - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - -config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - -config PHY_ROCKCHIP_USB - tristate "Rockchip USB2 PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip USB 2.0 PHY. - -config PHY_ROCKCHIP_INNO_USB2 - tristate "Rockchip INNO USB2PHY Driver" - depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF - depends on COMMON_CLK - depends on EXTCON - depends on USB_SUPPORT - select GENERIC_PHY - select USB_COMMON - help - Support for Rockchip USB2.0 PHY with Innosilicon IP block. - -config PHY_ROCKCHIP_EMMC - tristate "Rockchip EMMC PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip EMMC PHY. - -config PHY_ROCKCHIP_DP - tristate "Rockchip Display Port PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip Display Port PHY. - -config PHY_ROCKCHIP_PCIE - tristate "Rockchip PCIe PHY Driver" - depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the Rockchip PCIe PHY. - -config PHY_ROCKCHIP_TYPEC - tristate "Rockchip TYPEC PHY Driver" - depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) - select EXTCON - select GENERIC_PHY - select RESET_CONTROLLER - help - Enable this to support the Rockchip USB TYPEC PHY. - -config PHY_ST_SPEAR1310_MIPHY - tristate "ST SPEAR1310-MIPHY driver" - select GENERIC_PHY - depends on MACH_SPEAR1310 || COMPILE_TEST - help - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. - -config PHY_ST_SPEAR1340_MIPHY - tristate "ST SPEAR1340-MIPHY driver" - select GENERIC_PHY - depends on MACH_SPEAR1340 || COMPILE_TEST - help - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. - config PHY_XGENE tristate "APM X-Gene 15Gbps PHY support" depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) @@ -430,104 +48,17 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. -config PHY_STIH407_USB - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" - depends on RESET_CONTROLLER - depends on ARCH_STI || COMPILE_TEST - select GENERIC_PHY - help - Enable this support to enable the picoPHY device used by USB2 - and USB3 controllers on STMicroelectronics STiH407 SoC families. - -config PHY_QCOM_QMP - tristate "Qualcomm QMP PHY Driver" - depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) - select GENERIC_PHY - help - Enable this to support the QMP PHY transceiver that is used - with controllers such as PCIe, UFS, and USB on Qualcomm chips. - -config PHY_QCOM_QUSB2 - tristate "Qualcomm QUSB2 PHY Driver" - depends on OF && (ARCH_QCOM || COMPILE_TEST) - depends on NVMEM || !NVMEM - select GENERIC_PHY - help - Enable this to support the HighSpeed QUSB2 PHY transceiver for USB - controllers on Qualcomm chips. This driver supports the high-speed - PHY which is usually paired with either the ChipIdea or Synopsys DWC3 - USB IPs on MSM SOCs. - -config PHY_QCOM_UFS - tristate "Qualcomm UFS PHY driver" - depends on OF && ARCH_QCOM - select GENERIC_PHY - help - Support for UFS PHY on QCOM chipsets. - -config PHY_QCOM_USB_HS - tristate "Qualcomm USB HS PHY module" - depends on USB_ULPI_BUS - depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in - select GENERIC_PHY - help - Support for the USB high-speed ULPI compliant phy on Qualcomm - chipsets. - -config PHY_QCOM_USB_HSIC - tristate "Qualcomm USB HSIC ULPI PHY module" - depends on USB_ULPI_BUS - select GENERIC_PHY - help - Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. - -config PHY_TUSB1210 - tristate "TI TUSB1210 ULPI PHY module" - depends on USB_ULPI_BUS - select GENERIC_PHY - help - Support for TI TUSB1210 USB ULPI PHY. - -config PHY_BRCM_SATA - tristate "Broadcom SATA PHY driver" - depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST - depends on OF - select GENERIC_PHY - default ARCH_BCM_IPROC - help - Enable this to support the Broadcom SATA PHY. - If unsure, say N. - -config PHY_CYGNUS_PCIE - tristate "Broadcom Cygnus PCIe PHY driver" - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) - select GENERIC_PHY - default ARCH_BCM_CYGNUS - help - Enable this to support the Broadcom Cygnus PCIe PHY. - If unsure, say N. - +source "drivers/phy/allwinner/Kconfig" +source "drivers/phy/amlogic/Kconfig" +source "drivers/phy/broadcom/Kconfig" +source "drivers/phy/hisilicon/Kconfig" +source "drivers/phy/marvell/Kconfig" +source "drivers/phy/qualcomm/Kconfig" +source "drivers/phy/renesas/Kconfig" +source "drivers/phy/rockchip/Kconfig" +source "drivers/phy/samsung/Kconfig" +source "drivers/phy/st/Kconfig" source "drivers/phy/tegra/Kconfig" - -config PHY_NS2_PCIE - tristate "Broadcom Northstar2 PCIe PHY driver" - depends on OF && MDIO_BUS_MUX_BCM_IPROC - select GENERIC_PHY - default ARCH_BCM_IPROC - help - Enable this to support the Broadcom Northstar2 PCIe PHY. - If unsure, say N. - -config PHY_MESON8B_USB2 - tristate "Meson8b and GXBB USB2 PHY driver" - default ARCH_MESON - depends on OF && (ARCH_MESON || COMPILE_TEST) - depends on USB_SUPPORT - select USB_COMMON - select GENERIC_PHY - help - Enable this to support the Meson USB2 PHYs found in Meson8b - and GXBB SoCs. - If unsure, say N. +source "drivers/phy/ti/Kconfig" endmenu |