diff options
Diffstat (limited to 'drivers/pcmcia')
| -rw-r--r-- | drivers/pcmcia/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/pcmcia/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pcmcia/hd64465_ss.c | 939 |
3 files changed, 0 insertions, 944 deletions
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index f57eeae3830a..222904411a13 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -188,10 +188,6 @@ config PCMCIA_M8XX This driver is also available as a module called m8xx_pcmcia. -config HD64465_PCMCIA - tristate "HD64465 host bridge support" - depends on HD64465 && PCMCIA - config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 23e492bf75cf..238629ad7f7c 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_I82365) += i82365.o obj-$(CONFIG_I82092) += i82092.o obj-$(CONFIG_TCIC) += tcic.o obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o -obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o obj-$(CONFIG_M32R_PCC) += m32r_pcc.o diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c deleted file mode 100644 index 9ef69cdb3183..000000000000 --- a/drivers/pcmcia/hd64465_ss.c +++ /dev/null @@ -1,939 +0,0 @@ -/* - * Device driver for the PCMCIA controller module of the - * Hitachi HD64465 handheld companion chip. - * - * Note that the HD64465 provides a very thin PCMCIA host bridge - * layer, requiring a lot of the work of supporting cards to be - * performed by the processor. For example: mapping of card - * interrupts to processor IRQs is done by IRQ demuxing software; - * IO and memory mappings are fixed; setting voltages according - * to card Voltage Select pins etc is done in software. - * - * Note also that this driver uses only the simple, fixed, - * 16MB, 16-bit wide mappings to PCMCIA spaces defined by the - * HD64465. Larger mappings, smaller mappings, or mappings of - * different width to the same socket, are all possible only by - * involving the SH7750's MMU, which is considered unnecessary here. - * The downside is that it may be possible for some drivers to - * break because they need or expect 8-bit mappings. - * - * This driver currently supports only the following configuration: - * SH7750 CPU, HD64465, TPS2206 voltage control chip. - * - * by Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <asm/errno.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/hd64465/io.h> - -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/ds.h> -#include <pcmcia/ss.h> - -#define MODNAME "hd64465_ss" - -/* #define HD64465_DEBUG 1 */ - -#if HD64465_DEBUG -#define DPRINTK(args...) printk(MODNAME ": " args) -#else -#define DPRINTK(args...) -#endif - -extern int hd64465_io_debug; -extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); -extern void p3_iounmap(void *addr); - -/*============================================================*/ - -#define HS_IO_MAP_SIZE (64*1024) - -typedef struct hs_socket_t -{ - unsigned int number; - u_int irq; - u_long mem_base; - void *io_base; - u_long mem_length; - u_int ctrl_base; - socket_state_t state; - pccard_io_map io_maps[MAX_IO_WIN]; - pccard_mem_map mem_maps[MAX_WIN]; - struct pcmcia_socket socket; -} hs_socket_t; - - - -#define HS_MAX_SOCKETS 2 -static hs_socket_t hs_sockets[HS_MAX_SOCKETS]; - -#define hs_in(sp, r) inb((sp)->ctrl_base + (r)) -#define hs_out(sp, v, r) outb(v, (sp)->ctrl_base + (r)) - - -/* translate a boolean value to a bit in a register */ -#define bool_to_regbit(sp, r, bi, bo) \ - do { \ - unsigned short v = hs_in(sp, r); \ - if (bo) \ - v |= (bi); \ - else \ - v &= ~(bi); \ - hs_out(sp, v, r); \ - } while(0) - -/* register offsets from HD64465_REG_PCC[01]ISR */ -#define ISR 0x0 -#define GCR 0x2 -#define CSCR 0x4 -#define CSCIER 0x6 -#define SCR 0x8 - - -/* Mask and values for CSCIER register */ -#define IER_MASK 0x80 -#define IER_ON 0x3f /* interrupts on */ -#define IER_OFF 0x00 /* interrupts off */ - -/*============================================================*/ - -#if HD64465_DEBUG > 10 - -static void cis_hex_dump(const unsigned char *x, int len) -{ - int i; - - for (i=0 ; i<len ; i++) - { - if (!(i & 0xf)) - printk("\n%08x", (unsigned)(x + i)); - printk(" %02x", *(volatile unsigned short*)x); - x += 2; - } - printk("\n"); -} - -#endif -/*============================================================*/ - -/* - * This code helps create the illusion that the IREQ line from - * the PC card is mapped to one of the CPU's IRQ lines by the - * host bridge hardware (which is how every host bridge *except* - * the HD64465 works). In particular, it supports enabling - * and disabling the IREQ line by code which knows nothing - * about the host bridge (e.g. device drivers, IDE code) using - * the request_irq(), free_irq(), probe_irq_on() and probe_irq_off() - * functions. Also, it supports sharing the mapped IRQ with - * real hardware IRQs from the -IRL0-3 lines. - */ - -#define HS_NUM_MAPPED_IRQS 16 /* Limitation of the PCMCIA code */ -static struct -{ - /* index is mapped irq number */ - hs_socket_t *sock; - hw_irq_controller *old_handler; -} hs_mapped_irq[HS_NUM_MAPPED_IRQS]; - -static void hs_socket_enable_ireq(hs_socket_t *sp) -{ - unsigned short cscier; - - DPRINTK("hs_socket_enable_ireq(sock=%d)\n", sp->number); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - cscier |= HD64465_PCCCSCIER_PIREQE_LEVEL; - hs_out(sp, cscier, CSCIER); -} - -static void hs_socket_disable_ireq(hs_socket_t *sp) -{ - unsigned short cscier; - - DPRINTK("hs_socket_disable_ireq(sock=%d)\n", sp->number); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - hs_out(sp, cscier, CSCIER); -} - -static unsigned int hs_startup_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->startup(irq); - return 0; -} - -static void hs_shutdown_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->shutdown(irq); -} - -static void hs_enable_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->enable(irq); -} - -static void hs_disable_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->disable(irq); -} - -extern struct hw_interrupt_type no_irq_type; - -static void hs_mask_and_ack_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - /* ack_none() spuriously complains about an unexpected IRQ */ - if (hs_mapped_irq[irq].old_handler != &no_irq_type) - hs_mapped_irq[irq].old_handler->ack(irq); -} - -static void hs_end_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->end(irq); -} - - -static struct hw_interrupt_type hd64465_ss_irq_type = { - .typename = "PCMCIA-IRQ", - .startup = hs_startup_irq, - .shutdown = hs_shutdown_irq, - .enable = hs_enable_irq, - .disable = hs_disable_irq, - .ack = hs_mask_and_ack_irq, - .end = hs_end_irq -}; - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_map_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_map_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - hs_mapped_irq[irq].sock = sp; - /* insert ourselves as the irq controller */ - hs_mapped_irq[irq].old_handler = desc->chip; - desc->chip = &hd64465_ss_irq_type; -} - - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_unmap_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_unmap_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - /* restore the original irq controller */ - desc->chip = hs_mapped_irq[irq].old_handler; -} - -/*============================================================*/ - - -/* - * Set Vpp and Vcc (in tenths of a Volt). Does not - * support the hi-Z state. - * - * Note, this assumes the board uses a TPS2206 chip to control - * the Vcc and Vpp voltages to the hs_sockets. If your board - * uses the MIC2563 (also supported by the HD64465) then you - * will have to modify this function. - */ - /* 0V 3.3V 5.5V */ -static const u_char hs_tps2206_avcc[3] = { 0x00, 0x04, 0x08 }; -static const u_char hs_tps2206_bvcc[3] = { 0x00, 0x80, 0x40 }; - -static int hs_set_voltages(hs_socket_t *sp, int Vcc, int Vpp) -{ - u_int psr; - u_int vcci = 0; - u_int sock = sp->number; - - DPRINTK("hs_set_voltage(%d, %d, %d)\n", sock, Vcc, Vpp); - - switch (Vcc) - { - case 0: vcci = 0; break; - case 33: vcci = 1; break; - case 50: vcci = 2; break; - default: return 0; - } - - /* Note: Vpp = 120 not supported -- Greg Banks */ - if (Vpp != 0 && Vpp != Vcc) - return 0; - - /* The PSR register holds 8 of the 9 bits which control - * the TPS2206 via its serial interface. - */ - psr = inw(HD64465_REG_PCCPSR); - switch (sock) - { - case 0: - psr &= 0x0f; - psr |= hs_tps2206_avcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x02); - break; - case 1: - psr &= 0xf0; - psr |= hs_tps2206_bvcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x20); - break; - }; - outw(psr, HD64465_REG_PCCPSR); - - return 1; -} - - -/*============================================================*/ - -/* - * Drive the RESET line to the card. - */ -static void hs_reset_socket(hs_socket_t *sp, int on) -{ - unsigned short v; - - v = hs_in(sp, GCR); - if (on) - v |= HD64465_PCCGCR_PCCR; - else - v &= ~HD64465_PCCGCR_PCCR; - hs_out(sp, v, GCR); -} - -/*============================================================*/ - -static int hs_init(struct pcmcia_socket *s) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - - DPRINTK("hs_init(%d)\n", sp->number); - - return 0; -} - -/*============================================================*/ - - -static int hs_get_status(struct pcmcia_socket *s, u_int *value) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - unsigned int isr; - u_int status = 0; - - - isr = hs_in(sp, ISR); - - /* Card is seated and powered when *both* CD pins are low */ - if ((isr & HD64465_PCCISR_PCD_MASK) == 0) - { - status |= SS_DETECT; /* card present */ - - switch (isr & HD64465_PCCISR_PBVD_MASK) - { - case HD64465_PCCISR_PBVD_BATGOOD: - break; - case HD64465_PCCISR_PBVD_BATWARN: - status |= SS_BATWARN; - break; - default: - status |= SS_BATDEAD; - break; - } - - if (isr & HD64465_PCCISR_PREADY) - status |= SS_READY; - - if (isr & HD64465_PCCISR_PMWP) - status |= SS_WRPROT; - - /* Voltage Select pins interpreted as per Table 4-5 of the std. - * Assuming we have the TPS2206, the socket is a "Low Voltage - * key, 3.3V and 5V available, no X.XV available". - */ - switch (isr & (HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1)) - { - case HD64465_PCCISR_PVS1: - printk(KERN_NOTICE MODNAME ": cannot handle X.XV card, ignored\n"); - status = 0; - break; - case 0: - case HD64465_PCCISR_PVS2: - /* 3.3V */ - status |= SS_3VCARD; - break; - case HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1: - /* 5V */ - break; - } - - /* TODO: SS_POWERON */ - /* TODO: SS_STSCHG */ - } - - DPRINTK("hs_get_status(%d) = %x\n", sock, status); - - *value = status; - return 0; -} - -/*============================================================*/ - -static int hs_set_socket(struct pcmcia_socket *s, socket_state_t *state) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - u_long flags; - u_int changed; - unsigned short cscier; - - DPRINTK("hs_set_socket(sock=%d, flags=%x, csc_mask=%x, Vcc=%d, Vpp=%d, io_irq=%d)\n", - sock, state->flags, state->csc_mask, state->Vcc, state->Vpp, state->io_irq); - - local_irq_save(flags); /* Don't want interrupts happening here */ - - if (state->Vpp != sp->state.Vpp || - state->Vcc != sp->state.Vcc) { - if (!hs_set_voltages(sp, state->Vcc, state->Vpp)) { - local_irq_restore(flags); - return -EINVAL; - } - } - -/* hd64465_io_debug = 1; */ - /* - * Handle changes in the Card Status Change mask, - * by propagating to the CSCR register - */ - changed = sp->state.csc_mask ^ state->csc_mask; - cscier = hs_in(sp, CSCIER); - - if (changed & SS_DETECT) { - if (state->csc_mask & SS_DETECT) - cscier |= HD64465_PCCCSCIER_PCDE; - else - cscier &= ~HD64465_PCCCSCIER_PCDE; - } - - if (changed & SS_READY) { - if (state->csc_mask & SS_READY) - cscier |= HD64465_PCCCSCIER_PRE; - else - cscier &= ~HD64465_PCCCSCIER_PRE; - } - - if (changed & SS_BATDEAD) { - if (state->csc_mask & SS_BATDEAD) - cscier |= HD64465_PCCCSCIER_PBDE; - else - cscier &= ~HD64465_PCCCSCIER_PBDE; - } - - if (changed & SS_BATWARN) { - if (state->csc_mask & SS_BATWARN) - cscier |= HD64465_PCCCSCIER_PBWE; - else - cscier &= ~HD64465_PCCCSCIER_PBWE; - } - - if (changed & SS_STSCHG) { - if (state->csc_mask & SS_STSCHG) - cscier |= HD64465_PCCCSCIER_PSCE; - else - cscier &= ~HD64465_PCCCSCIER_PSCE; - } - - hs_out(sp, cscier, CSCIER); - - if (sp->state.io_irq && !state->io_irq) - hs_unmap_irq(sp, sp->state.io_irq); - else if (!sp->state.io_irq && state->io_irq) - hs_map_irq(sp, state->io_irq); - - - /* - * Handle changes in the flags field, - * by propagating to config registers. - */ - changed = sp->state.flags ^ state->flags; - - if (changed & SS_IOCARD) { - DPRINTK("card type: %s\n", - (state->flags & SS_IOCARD ? "i/o" : "memory" )); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCT, - state->flags & SS_IOCARD); - } - - if (changed & SS_RESET) { - DPRINTK("%s reset card\n", - (state->flags & SS_RESET ? "start" : "stop")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCR, - state->flags & SS_RESET); - } - - if (changed & SS_OUTPUT_ENA) { - DPRINTK("%sabling card output\n", - (state->flags & SS_OUTPUT_ENA ? "en" : "dis")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PDRV, - state->flags & SS_OUTPUT_ENA); - } - - /* TODO: SS_SPKR_ENA */ - -/* hd64465_io_debug = 0; */ - sp->state = *state; - - local_irq_restore(flags); - -#if HD64465_DEBUG > 10 - if (state->flags & SS_OUTPUT_ENA) - cis_hex_dump((const unsigned char*)sp->mem_base, 0x100); -#endif - return 0; -} - -/*============================================================*/ - -static int hs_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - int map = io->map; - int sock = sp->number; - struct pccard_io_map *sio; - pgprot_t prot; - - DPRINTK("hs_set_io_map(sock=%d, map=%d, flags=0x%x, speed=%dns, start=%#lx, stop=%#lx)\n", - sock, map, io->flags, io->speed, io->start, io->stop); - if (map >= MAX_IO_WIN) - return -EINVAL; - sio = &sp->io_maps[map]; - - /* check for null changes */ - if (io->flags == sio->flags && - io->start == sio->start && - io->stop == sio->stop) - return 0; - - if (io->flags & MAP_AUTOSZ) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IODYN); - else if (io->flags & MAP_16BIT) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO16); - else - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO8); - - /* TODO: handle MAP_USE_WAIT */ - if (io->flags & MAP_USE_WAIT) - printk(KERN_INFO MODNAME ": MAP_USE_WAIT unimplemented\n"); - /* TODO: handle MAP_PREFETCH */ - if (io->flags & MAP_PREFETCH) - printk(KERN_INFO MODNAME ": MAP_PREFETCH unimplemented\n"); - /* TODO: handle MAP_WRPROT */ - if (io->flags & MAP_WRPROT) - printk(KERN_INFO MODNAME ": MAP_WRPROT unimplemented\n"); - /* TODO: handle MAP_0WS */ - if (io->flags & MAP_0WS) - printk(KERN_INFO MODNAME ": MAP_0WS unimplemented\n"); - - if (io->flags & MAP_ACTIVE) { - unsigned long pstart, psize, paddrbase; - - paddrbase = virt_to_phys((void*)(sp->mem_base + 2 * HD64465_PCC_WINDOW)); - pstart = io->start & PAGE_MASK; - psize = ((io->stop + PAGE_SIZE) & PAGE_MASK) - pstart; - - /* - * Change PTEs in only that portion of the mapping requested - * by the caller. This means that most of the time, most of - * the PTEs in the io_vma will be unmapped and only the bottom - * page will be mapped. But the code allows for weird cards - * that might want IO ports > 4K. - */ - sp->io_base = p3_ioremap(paddrbase + pstart, psize, pgprot_val(prot)); - - /* - * Change the mapping used by inb() outb() etc - */ - hd64465_port_map(io->start, - io->stop - io->start + 1, - (unsigned long)sp->io_base + io->start, 0); - } else { - hd64465_port_unmap(sio->start, sio->stop - sio->start + 1); - p3_iounmap(sp->io_base); - } - - *sio = *io; - return 0; -} - -/*============================================================*/ - -static int hs_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *mem) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - struct pccard_mem_map *smem; - int map = mem->map; - unsigned long paddr; - -#if 0 - DPRINTK("hs_set_mem_map(sock=%d, map=%d, flags=0x%x, card_start=0x%08x)\n", - sock, map, mem->flags, mem->card_start); -#endif - - if (map >= MAX_WIN) - return -EINVAL; - smem = &sp->mem_maps[map]; - - paddr = sp->mem_base; /* base of Attribute mapping */ - if (!(mem->flags & MAP_ATTRIB)) - paddr += HD64465_PCC_WINDOW; /* base of Common mapping */ - paddr += mem->card_start; - - /* Because we specified SS_CAP_STATIC_MAP, we are obliged - * at this time to report the system address corresponding - * to the card address requested. This is how Socket Services - * queries our fixed mapping. I wish this fact had been - * documented - Greg Banks. - */ - mem->static_start = paddr; - - *smem = *mem; - - return 0; -} - -/* TODO: do we need to use the MMU to access Common memory ??? */ - -/*============================================================*/ - -/* - * This function is registered with the HD64465 glue code to do a - * secondary demux step on the PCMCIA interrupts. It handles - * mapping the IREQ request from the card to a standard Linux - * IRQ, as requested by SocketServices. - */ -static int hs_irq_demux(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int cscr; - - DPRINTK("hs_irq_demux(irq=%d)\n", irq); - - if (sp->state.io_irq && - (cscr = hs_in(sp, CSCR)) & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - hs_out(sp, cscr, CSCR); - return sp->state.io_irq; - } - - return irq; -} - -/*============================================================*/ - -/* - * Interrupt handling routine. - */ - -static irqreturn_t hs_interrupt(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int events = 0; - u_int cscr; - - cscr = hs_in(sp, CSCR); - - DPRINTK("hs_interrupt, cscr=%04x\n", cscr); - - /* check for bus-related changes to be reported to Socket Services */ - if (cscr & HD64465_PCCCSCR_PCDC) { - /* double-check for a 16-bit card, as we don't support CardBus */ - if ((hs_in(sp, ISR) & HD64465_PCCISR_PCD_MASK) != 0) { - printk(KERN_NOTICE MODNAME - ": socket %d, card not a supported card type or not inserted correctly\n", - sp->number); - /* Don't do the rest unless a card is present */ - cscr &= ~(HD64465_PCCCSCR_PCDC| - HD64465_PCCCSCR_PRC| - HD64465_PCCCSCR_PBW| - HD64465_PCCCSCR_PBD| - HD64465_PCCCSCR_PSC); - } else { - cscr &= ~HD64465_PCCCSCR_PCDC; - events |= SS_DETECT; /* card insertion or removal */ - } - } - if (cscr & HD64465_PCCCSCR_PRC) { - cscr &= ~HD64465_PCCCSCR_PRC; - events |= SS_READY; /* ready signal changed */ - } - if (cscr & HD64465_PCCCSCR_PBW) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATWARN; /* battery warning */ - } - if (cscr & HD64465_PCCCSCR_PBD) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATDEAD; /* battery dead */ - } - if (cscr & HD64465_PCCCSCR_PSC) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_STSCHG; /* STSCHG (status changed) signal */ - } - - if (cscr & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - - /* This should have been dealt with during irq demux */ - printk(KERN_NOTICE MODNAME ": unexpected IREQ from card\n"); - } - - hs_out(sp, cscr, CSCR); - - if (events) - pcmcia_parse_events(&sp->socket, events); - - return IRQ_HANDLED; -} - -/*============================================================*/ - -static struct pccard_operations hs_operations = { - .init = hs_init, - .get_status = hs_get_status, - .set_socket = hs_set_socket, - .set_io_map = hs_set_io_map, - .set_mem_map = hs_set_mem_map, -}; - -static int hs_init_socket(hs_socket_t *sp, int irq, unsigned long mem_base, - unsigned int ctrl_base) -{ - unsigned short v; - int i, err; - - memset(sp, 0, sizeof(*sp)); - sp->irq = irq; - sp->mem_base = mem_base; - sp->mem_length = 4*HD64465_PCC_WINDOW; /* 16MB */ - sp->ctrl_base = ctrl_base; - - for (i=0 ; i<MAX_IO_WIN ; i++) - sp->io_maps[i].map = i; - for (i=0 ; i<MAX_WIN ; i++) - sp->mem_maps[i].map = i; - - hd64465_register_irq_demux(sp->irq, hs_irq_demux, sp); - - if ((err = request_irq(sp->irq, hs_interrupt, IRQF_DISABLED, MODNAME, sp)) < 0) - return err; - if (request_mem_region(sp->mem_base, sp->mem_length, MODNAME) == 0) { - sp->mem_base = 0; - return -ENOMEM; - } - - - /* According to section 3.2 of the PCMCIA standard, low-voltage - * capable cards must implement cold insertion, i.e. Vpp and - * Vcc set to 0 before card is inserted. - */ - /*hs_set_voltages(sp, 0, 0);*/ - - /* hi-Z the outputs to the card and set 16MB map mode */ - v = hs_in(sp, GCR); - v &= ~HD64465_PCCGCR_PCCT; /* memory-only card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PDRV; /* enable outputs to card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PMMOD; /* 16MB mapping mode */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - /* lowest 16MB of Common */ - v &= ~(HD64465_PCCGCR_PPA25|HD64465_PCCGCR_PPA24); - hs_out(sp, v, GCR); - - hs_reset_socket(sp, 1); - - printk(KERN_INFO "HD64465 PCMCIA bridge socket %d at 0x%08lx irq %d\n", - i, sp->mem_base, sp->irq); - - return 0; -} - -static void hs_exit_socket(hs_socket_t *sp) -{ - unsigned short cscier, gcr; - unsigned long flags; - - local_irq_save(flags); - - /* turn off interrupts in hardware */ - cscier = hs_in(sp, CSCIER); - cscier = (cscier & IER_MASK) | IER_OFF; - hs_out(sp, cscier, CSCIER); - - /* hi-Z the outputs to the card */ - gcr = hs_in(sp, GCR); - gcr &= HD64465_PCCGCR_PDRV; - hs_out(sp, gcr, GCR); - - /* power the card down */ - hs_set_voltages(sp, 0, 0); - - if (sp->mem_base != 0) - release_mem_region(sp->mem_base, sp->mem_length); - if (sp->irq != 0) { - free_irq(sp->irq, hs_interrupt); - hd64465_unregister_irq_demux(sp->irq); - } - - local_irq_restore(flags); -} - -static struct device_driver hd64465_driver = { - .name = "hd64465-pcmcia", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, -}; - -static struct platform_device hd64465_device = { - .name = "hd64465-pcmcia", - .id = 0, -}; - -static int __init init_hs(void) -{ - int i; - unsigned short v; - -/* hd64465_io_debug = 1; */ - if (driver_register(&hd64465_driver)) - return -EINVAL; - - /* Wake both sockets out of STANDBY mode */ - /* TODO: wait 15ms */ - v = inw(HD64465_REG_SMSCR); - v &= ~(HD64465_SMSCR_PC0ST|HD64465_SMSCR_PC1ST); - outw(v, HD64465_REG_SMSCR); - - /* keep power controller out of shutdown mode */ - v = inb(HD64465_REG_PCC0SCR); - v |= HD64465_PCCSCR_SHDN; - outb(v, HD64465_REG_PCC0SCR); - - /* use serial (TPS2206) power controller */ - v = inb(HD64465_REG_PCC0CSCR); - v |= HD64465_PCCCSCR_PSWSEL; - outb(v, HD64465_REG_PCC0CSCR); - - /* - * Setup hs_sockets[] structures and request system resources. - * TODO: on memory allocation failure, power down the socket - * before quitting. - */ - for (i=0; i<HS_MAX_SOCKETS; i++) { - hs_set_voltages(&hs_sockets[i], 0, 0); - - hs_sockets[i].socket.features |= SS_CAP_PCCARD | SS_CAP_STATIC_MAP; /* mappings are fixed in host memory */ - hs_sockets[i].socket.resource_ops = &pccard_static_ops; - hs_sockets[i].socket.irq_mask = 0xffde;/*0xffff*/ /* IRQs mapped in s/w so can do any, really */ - hs_sockets[i].socket.map_size = HD64465_PCC_WINDOW; /* 16MB fixed window size */ - - hs_sockets[i].socket.owner = THIS_MODULE; - hs_sockets[i].socket.ss_entry = &hs_operations; - } - - i = hs_init_socket(&hs_sockets[0], - HD64465_IRQ_PCMCIA0, - HD64465_PCC0_BASE, - HD64465_REG_PCC0ISR); - if (i < 0) { - unregister_driver(&hd64465_driver); - return i; - } - i = hs_init_socket(&hs_sockets[1], - HD64465_IRQ_PCMCIA1, - HD64465_PCC1_BASE, - HD64465_REG_PCC1ISR); - if (i < 0) { - unregister_driver(&hd64465_driver); - return i; - } - -/* hd64465_io_debug = 0; */ - - platform_device_register(&hd64465_device); - - for (i=0; i<HS_MAX_SOCKETS; i++) { - unsigned int ret; - hs_sockets[i].socket.dev.parent = &hd64465_device.dev; - hs_sockets[i].number = i; - ret = pcmcia_register_socket(&hs_sockets[i].socket); - if (ret && i) - pcmcia_unregister_socket(&hs_sockets[0].socket); - } - - return 0; -} - -static void __exit exit_hs(void) -{ - int i; - - for (i=0 ; i<HS_MAX_SOCKETS ; i++) { - pcmcia_unregister_socket(&hs_sockets[i].socket); - hs_exit_socket(&hs_sockets[i]); - } - - platform_device_unregister(&hd64465_device); - unregister_driver(&hd64465_driver); -} - -module_init(init_hs); -module_exit(exit_hs); - -/*============================================================*/ -/*END*/ |