diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/quirks.c | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 039e87b71442..81d19d5683ac 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2533,6 +2533,91 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov); #endif /* CONFIG_PCI_IOV */ +/* + * This is a quirk for the Ricoh MMC controller found as a part of + * some mulifunction chips. + + * This is very similiar and based on the ricoh_mmc driver written by + * Philip Langdale. Thank you for these magic sequences. + * + * These chips implement the four main memory card controllers (SD, MMC, MS, xD) + * and one or both of cardbus or firewire. + * + * It happens that they implement SD and MMC + * support as separate controllers (and PCI functions). The linux SDHCI + * driver supports MMC cards but the chip detects MMC cards in hardware + * and directs them to the MMC controller - so the SDHCI driver never sees + * them. + * + * To get around this, we must disable the useless MMC controller. + * At that point, the SDHCI controller will start seeing them + * It seems to be the case that the relevant PCI registers to deactivate the + * MMC controller live on PCI function 0, which might be the cardbus controller + * or the firewire controller, depending on the particular chip in question + * + * This has to be done early, because as soon as we disable the MMC controller + * other pci functions shift up one level, e.g. function #2 becomes function + * #1, and this will confuse the pci core. + */ + +#ifdef CONFIG_MMC_RICOH_MMC +static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) +{ + /* disable via cardbus interface */ + u8 write_enable; + u8 write_target; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xB7, &disable); + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0x8E, &write_enable); + pci_write_config_byte(dev, 0x8E, 0xAA); + pci_read_config_byte(dev, 0x8D, &write_target); + pci_write_config_byte(dev, 0x8D, 0xB7); + pci_write_config_byte(dev, 0xB7, disable | 0x02); + pci_write_config_byte(dev, 0x8E, write_enable); + pci_write_config_byte(dev, 0x8D, write_target); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); + +static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) +{ + /* disable via firewire interface */ + u8 write_enable; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xCB, &disable); + + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0xCA, &write_enable); + pci_write_config_byte(dev, 0xCA, 0x57); + pci_write_config_byte(dev, 0xCB, disable | 0x02); + pci_write_config_byte(dev, 0xCA, write_enable); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +#endif /*CONFIG_MMC_RICOH_MMC*/ + + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { |