diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/controller/vmd.c | 5 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 30 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 13 |
3 files changed, 25 insertions, 23 deletions
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index e386d4eac407..9a64cf90c291 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -546,9 +546,10 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) vmd->irq_domain = pci_msi_create_irq_domain(fn, &vmd_msi_domain_info, x86_vector_domain); - irq_domain_free_fwnode(fn); - if (!vmd->irq_domain) + if (!vmd->irq_domain) { + irq_domain_free_fwnode(fn); return -ENODEV; + } pci_add_resource(&resources, &vmd->resources[0]); pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ce096272f52b..c9338f914a0e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4638,8 +4638,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) * pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? - * @delay: Delay to wait after link has become active (in ms). Specify %0 - * for no delay. + * @delay: Delay to wait after link has become active (in ms) * * Use this to wait till link becomes active or inactive. */ @@ -4680,7 +4679,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, msleep(10); timeout -= 10; } - if (active && ret && delay) + if (active && ret) msleep(delay); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", @@ -4801,28 +4800,17 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev) if (!pcie_downstream_port(dev)) return; - /* - * Per PCIe r5.0, sec 6.6.1, for downstream ports that support - * speeds > 5 GT/s, we must wait for link training to complete - * before the mandatory delay. - * - * We can only tell when link training completes via DLL Link - * Active, which is required for downstream ports that support - * speeds > 5 GT/s (sec 7.5.3.6). Unfortunately some common - * devices do not implement Link Active reporting even when it's - * required, so we'll check for that directly instead of checking - * the supported link speed. We assume devices without Link Active - * reporting can train in 100 ms regardless of speed. - */ - if (dev->link_active_reporting) { - pci_dbg(dev, "waiting for link to train\n"); - if (!pcie_wait_for_link_delay(dev, true, 0)) { + if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) { + pci_dbg(dev, "waiting %d ms for downstream link\n", delay); + msleep(delay); + } else { + pci_dbg(dev, "waiting %d ms for downstream link, after activation\n", + delay); + if (!pcie_wait_for_link_delay(dev, true, delay)) { /* Did not train, no need to wait any further */ return; } } - pci_dbg(child, "waiting %d ms to become accessible\n", delay); - msleep(delay); if (!pci_device_is_present(child)) { pci_dbg(child, "waiting additional %d ms to become accessible\n", delay); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 812bfc32ecb8..2ea61abd5830 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2330,6 +2330,19 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); +static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev) +{ + pci_info(dev, "Disabling ASPM L0s/L1\n"); + pci_disable_link_state(dev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); +} + +/* + * ASM1083/1085 PCIe-PCI bridge devices cause AER timeout errors on the + * upstream PCIe root port when ASPM is enabled. At least L0s mode is affected; + * disable both L0s and L1 for now to be safe. + */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1); + /* * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain * Link bit cleared after starting the link retrain process to allow this |