diff options
Diffstat (limited to 'drivers/pci/quirks.c')
| -rw-r--r-- | drivers/pci/quirks.c | 100 |
1 files changed, 0 insertions, 100 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e8a7f1b1b2bc..5b4483811691 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -714,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id ); -#ifdef CONFIG_ACPI_SLEEP - -/* - * Some VIA systems boot with the abnormal status flag set. This can cause - * the BIOS to re-POST the system on resume rather than passing control - * back to the OS. Clear the flag on boot - */ -static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev) -{ - u32 reg; - - acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, - ®); - - if (reg & 0x800) { - printk("Clearing abnormal poweroff flag\n"); - acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1_STATUS, - (u16)0x800); - } -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff); - -#endif - /* * CardBus controllers have a legacy base address that enables them * to respond as i82365 pcmcia controllers. We don't want them to @@ -1487,33 +1460,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); -/* - * Fixup the cardbus bridges on the IBM Dock II docking station - */ -static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev) -{ - u32 val; - - /* - * tie the 2 interrupt pins to INTA, and configure the - * multifunction routing register to handle this. - */ - if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) && - (dev->subsystem_device == 0x0148)) { - printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge " - "applying quirk\n"); - pci_read_config_dword(dev, 0x8c, &val); - val = ((val & 0xffffff00) | 0x1002); - pci_write_config_dword(dev, 0x8c, val); - pci_read_config_dword(dev, 0x80, &val); - val = ((val & 0x00ffff00) | 0x2864c077); - pci_write_config_dword(dev, 0x80, val); - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, - quirk_ibm_dock2_cardbus); - static void __devinit quirk_netmos(struct pci_dev *dev) { unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; @@ -1619,52 +1565,6 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); -/* - * Fixup to mark boot BIOS video selected by BIOS before it changes - * - * From information provided by "Jon Smirl" <jonsmirl@gmail.com> - * - * The standard boot ROM sequence for an x86 machine uses the BIOS - * to select an initial video card for boot display. This boot video - * card will have it's BIOS copied to C0000 in system RAM. - * IORESOURCE_ROM_SHADOW is used to associate the boot video - * card with this copy. On laptops this copy has to be used since - * the main ROM may be compressed or combined with another image. - * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW - * is marked here since the boot video device will be the only enabled - * video device at this point. - */ - -static void __devinit fixup_video(struct pci_dev *pdev) -{ - struct pci_dev *bridge; - struct pci_bus *bus; - u16 config; - - if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) - return; - - /* Is VGA routed to us? */ - bus = pdev->bus; - while (bus) { - bridge = bus->self; - if (bridge) { - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, - &config); - if (!(config & PCI_BRIDGE_CTL_VGA)) - return; - } - bus = bus->parent; - } - pci_read_config_word(pdev, PCI_COMMAND, &config); - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video); - - static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { while (f < end) { |