summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r--drivers/pci/quirks.c264
1 files changed, 161 insertions, 103 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 194b243a2817..51553179e967 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -253,7 +253,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx)
* workaround applied too
* [Info kindly provided by ALi]
*/
-static void __init quirk_alimagik(struct pci_dev *dev)
+static void __devinit quirk_alimagik(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) {
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
@@ -789,7 +789,7 @@ static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
-static void __init quirk_ioapic_rmw(struct pci_dev *dev)
+static void __devinit quirk_ioapic_rmw(struct pci_dev *dev)
{
if (dev->devfn == 0 && dev->bus->number == 0)
sis_apic_bug = 1;
@@ -801,7 +801,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw);
* Some settings of MMRBC can lead to data corruption so block changes.
* See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
*/
-static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev)
+static void __devinit quirk_amd_8131_mmrbc(struct pci_dev *dev)
{
if (dev->subordinate && dev->revision <= 0x12) {
dev_info(&dev->dev, "AMD8131 rev %x detected; "
@@ -1039,7 +1039,7 @@ static void quirk_disable_pxb(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
-static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
+static void quirk_amd_ide_mode(struct pci_dev *pdev)
{
/* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
u8 tmp;
@@ -1082,7 +1082,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB
/*
* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
*/
-static void __init quirk_ide_samemode(struct pci_dev *pdev)
+static void __devinit quirk_ide_samemode(struct pci_dev *pdev)
{
u8 prog;
@@ -1121,7 +1121,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
*/
-static void __init quirk_eisa_bridge(struct pci_dev *dev)
+static void __devinit quirk_eisa_bridge(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_EISA << 8;
}
@@ -1155,7 +1155,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e
*/
static int asus_hides_smbus;
-static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
+static void __devinit asus_hides_smbus_hostbridge(struct pci_dev *dev)
{
if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
@@ -1538,7 +1538,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3
#endif
#ifdef CONFIG_X86_IO_APIC
-static void __init quirk_alder_ioapic(struct pci_dev *pdev)
+static void __devinit quirk_alder_ioapic(struct pci_dev *pdev)
{
int i;
@@ -1777,7 +1777,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, qui
* but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
* Re-allocate the region if needed...
*/
-static void __init quirk_tc86c001_ide(struct pci_dev *dev)
+static void __devinit quirk_tc86c001_ide(struct pci_dev *dev)
{
struct resource *r = &dev->resource[0];
@@ -1938,53 +1938,16 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
u16 en1k;
- u8 io_base_lo, io_limit_lo;
- unsigned long base, limit;
- struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
pci_read_config_word(dev, 0x40, &en1k);
if (en1k & 0x200) {
dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n");
-
- pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
- pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
- base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
- limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
-
- if (base <= limit) {
- res->start = base;
- res->end = limit + 0x3ff;
- }
+ dev->io_window_1k = 1;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
-/* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2
- * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge()
- * in drivers/pci/setup-bus.c
- */
-static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev)
-{
- u16 en1k, iobl_adr, iobl_adr_1k;
- struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
-
- pci_read_config_word(dev, 0x40, &en1k);
-
- if (en1k & 0x200) {
- pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr);
-
- iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00);
-
- if (iobl_adr != iobl_adr_1k) {
- dev_info(&dev->dev, "Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1KB granularity\n",
- iobl_adr,iobl_adr_1k);
- pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k);
- }
- }
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl);
-
/* Under some circumstances, AER is not linked with extended capabilities.
* Force it to be linked by setting the corresponding control bit in the
* config space.
@@ -2104,7 +2067,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
PCI_DEVICE_ID_NX2_5709S,
quirk_brcm_570x_limit_vpd);
-static void __devinit quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
+static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
{
u32 rev;
@@ -2143,9 +2106,9 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
quirk_unhide_mch_dev6);
-#ifdef CONFIG_TILE
+#ifdef CONFIG_TILEPRO
/*
- * The Tilera TILEmpower platform needs to set the link speed
+ * The Tilera TILEmpower tilepro platform needs to set the link speed
* to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
* setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
* capability register of the PEX8624 PCIe switch. The switch
@@ -2160,7 +2123,7 @@ static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
-#endif /* CONFIG_TILE */
+#endif /* CONFIG_TILEPRO */
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
@@ -2169,7 +2132,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
* aware of it. Instead of setting the flag on all busses in the
* machine, simply disable MSI globally.
*/
-static void __init quirk_disable_all_msi(struct pci_dev *dev)
+static void __devinit quirk_disable_all_msi(struct pci_dev *dev)
{
pci_no_msi();
dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n");
@@ -2217,7 +2180,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi);
/* Go through the list of Hypertransport capabilities and
* return 1 if a HT MSI capability is found and enabled */
-static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
+static int msi_ht_cap_enabled(struct pci_dev *dev)
{
int pos, ttl = 48;
@@ -2241,7 +2204,7 @@ static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
}
/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */
-static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)
+static void quirk_msi_ht_cap(struct pci_dev *dev)
{
if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
dev_warn(&dev->dev, "MSI quirk detected; "
@@ -2255,7 +2218,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2
/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
*/
-static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
+static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
{
struct pci_dev *pdev;
@@ -2279,7 +2242,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_msi_ht_cap);
/* Force enable MSI mapping capability on HT bridges */
-static void __devinit ht_enable_msi_mapping(struct pci_dev *dev)
+static void ht_enable_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
@@ -2359,7 +2322,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4,
nvbridge_check_legacy_irq_routing);
-static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+static int ht_check_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
int found = 0;
@@ -2387,7 +2350,7 @@ static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
return found;
}
-static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)
+static int host_bridge_with_leaf(struct pci_dev *host_bridge)
{
struct pci_dev *dev;
int pos;
@@ -2421,7 +2384,7 @@ static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)
#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
-static int __devinit is_end_of_ht_chain(struct pci_dev *dev)
+static int is_end_of_ht_chain(struct pci_dev *dev)
{
int pos, ctrl_off;
int end = 0;
@@ -2445,7 +2408,7 @@ out:
return end;
}
-static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
+static void nv_ht_enable_msi_mapping(struct pci_dev *dev)
{
struct pci_dev *host_bridge;
int pos;
@@ -2484,7 +2447,7 @@ out:
pci_dev_put(host_bridge);
}
-static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
+static void ht_disable_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
@@ -2504,7 +2467,7 @@ static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
}
}
-static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
+static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
{
struct pci_dev *host_bridge;
int pos;
@@ -2541,23 +2504,26 @@ static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
else
nv_ht_enable_msi_mapping(dev);
}
- return;
+ goto out;
}
/* HT MSI is not enabled */
if (found == 1)
- return;
+ goto out;
/* Host bridge is not to HT, disable HT MSI mapping on this device */
ht_disable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
}
-static void __devinit nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
+static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
{
return __nv_msi_ht_cap_quirk(dev, 1);
}
-static void __devinit nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
+static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
{
return __nv_msi_ht_cap_quirk(dev, 0);
}
@@ -2879,20 +2845,34 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
-static void do_one_fixup_debug(void (*fn)(struct pci_dev *dev), struct pci_dev *dev)
+static ktime_t fixup_debug_start(struct pci_dev *dev,
+ void (*fn)(struct pci_dev *dev))
+{
+ ktime_t calltime = ktime_set(0, 0);
+
+ dev_dbg(&dev->dev, "calling %pF\n", fn);
+ if (initcall_debug) {
+ pr_debug("calling %pF @ %i for %s\n",
+ fn, task_pid_nr(current), dev_name(&dev->dev));
+ calltime = ktime_get();
+ }
+
+ return calltime;
+}
+
+static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
+ void (*fn)(struct pci_dev *dev))
{
- ktime_t calltime, delta, rettime;
+ ktime_t delta, rettime;
unsigned long long duration;
- printk(KERN_DEBUG "calling %pF @ %i for %s\n",
- fn, task_pid_nr(current), dev_name(&dev->dev));
- calltime = ktime_get();
- fn(dev);
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long) ktime_to_ns(delta) >> 10;
- printk(KERN_DEBUG "pci fixup %pF returned after %lld usecs for %s\n",
- fn, duration, dev_name(&dev->dev));
+ if (initcall_debug) {
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+ pr_debug("pci fixup %pF returned after %lld usecs for %s\n",
+ fn, duration, dev_name(&dev->dev));
+ }
}
/*
@@ -2930,34 +2910,24 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
/*
- * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
- * ASUS motherboards will cause memory corruption or a system crash
- * if they are in D3 while the system is put into S3 sleep.
+ * Some devices may pass our check in pci_intx_mask_supported if
+ * PCI_COMMAND_INTX_DISABLE works though they actually do not properly
+ * support this feature.
*/
-static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
+static void __devinit quirk_broken_intx_masking(struct pci_dev *dev)
{
- const char *sys_info;
- static const char good_Asus_board[] = "P8Z68-V";
-
- if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
- return;
- if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
- return;
- sys_info = dmi_get_system_info(DMI_BOARD_NAME);
- if (sys_info && memcmp(sys_info, good_Asus_board,
- sizeof(good_Asus_board) - 1) == 0)
- return;
-
- dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
- dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
- device_set_wakeup_capable(&dev->dev, false);
+ dev->broken_intx_masking = 1;
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030,
+ quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
+ quirk_broken_intx_masking);
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
+ ktime_t calltime;
+
for (; f < end; f++)
if ((f->class == (u32) (dev->class >> f->class_shift) ||
f->class == (u32) PCI_ANY_ID) &&
@@ -2965,11 +2935,9 @@ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
f->vendor == (u16) PCI_ANY_ID) &&
(f->device == dev->device ||
f->device == (u16) PCI_ANY_ID)) {
- dev_dbg(&dev->dev, "calling %pF\n", f->hook);
- if (initcall_debug)
- do_one_fixup_debug(f->hook, dev);
- else
- f->hook(dev);
+ calltime = fixup_debug_start(dev, f->hook);
+ f->hook(dev);
+ fixup_debug_report(dev, calltime, f->hook);
}
}
@@ -2988,6 +2956,7 @@ extern struct pci_fixup __end_pci_fixups_resume_early[];
extern struct pci_fixup __start_pci_fixups_suspend[];
extern struct pci_fixup __end_pci_fixups_suspend[];
+static bool pci_apply_fixup_final_quirks;
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
{
@@ -3005,6 +2974,8 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
break;
case pci_fixup_final:
+ if (!pci_apply_fixup_final_quirks)
+ return;
start = __start_pci_fixups_final;
end = __end_pci_fixups_final;
break;
@@ -3037,6 +3008,7 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
}
EXPORT_SYMBOL(pci_fixup_device);
+
static int __init pci_apply_final_quirks(void)
{
struct pci_dev *dev = NULL;
@@ -3047,6 +3019,7 @@ static int __init pci_apply_final_quirks(void)
printk(KERN_DEBUG "PCI: CLS %u bytes\n",
pci_cache_line_size << 2);
+ pci_apply_fixup_final_quirks = true;
for_each_pci_dev(dev) {
pci_fixup_device(pci_fixup_final, dev);
/*
@@ -3067,6 +3040,7 @@ static int __init pci_apply_final_quirks(void)
pci_cache_line_size = pci_dfl_cache_line_size;
}
}
+
if (!pci_cache_line_size) {
printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
cls << 2, pci_dfl_cache_line_size << 2);
@@ -3205,3 +3179,87 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe)
return -ENOTTY;
}
+
+static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev)
+{
+ if (!PCI_FUNC(dev->devfn))
+ return pci_dev_get(dev);
+
+ return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+}
+
+static const struct pci_dev_dma_source {
+ u16 vendor;
+ u16 device;
+ struct pci_dev *(*dma_source)(struct pci_dev *dev);
+} pci_dev_dma_source[] = {
+ /*
+ * https://bugzilla.redhat.com/show_bug.cgi?id=605888
+ *
+ * Some Ricoh devices use the function 0 source ID for DMA on
+ * other functions of a multifunction device. The DMA devices
+ * is therefore function 0, which will have implications of the
+ * iommu grouping of these devices.
+ */
+ { PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source },
+ { PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source },
+ { PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source },
+ { PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source },
+ { 0 }
+};
+
+/*
+ * IOMMUs with isolation capabilities need to be programmed with the
+ * correct source ID of a device. In most cases, the source ID matches
+ * the device doing the DMA, but sometimes hardware is broken and will
+ * tag the DMA as being sourced from a different device. This function
+ * allows that translation. Note that the reference count of the
+ * returned device is incremented on all paths.
+ */
+struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
+{
+ const struct pci_dev_dma_source *i;
+
+ for (i = pci_dev_dma_source; i->dma_source; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID))
+ return i->dma_source(dev);
+ }
+
+ return pci_dev_get(dev);
+}
+
+static const struct pci_dev_acs_enabled {
+ u16 vendor;
+ u16 device;
+ int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags);
+} pci_dev_acs_enabled[] = {
+ { 0 }
+};
+
+int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags)
+{
+ const struct pci_dev_acs_enabled *i;
+ int ret;
+
+ /*
+ * Allow devices that do not expose standard PCIe ACS capabilities
+ * or control to indicate their support here. Multi-function express
+ * devices which do not allow internal peer-to-peer between functions,
+ * but do not implement PCIe ACS may wish to return true here.
+ */
+ for (i = pci_dev_acs_enabled; i->acs_enabled; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID)) {
+ ret = i->acs_enabled(dev, acs_flags);
+ if (ret >= 0)
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 09:19:28 +0300