diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 33 |
1 files changed, 27 insertions, 6 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6916af269b19..4b0b1d0548f0 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4489,21 +4489,42 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active) bool ret; u16 lnk_status; + /* + * Some controllers might not implement link active reporting. In this + * case, we wait for 1000 + 100 ms. + */ + if (!pdev->link_active_reporting) { + msleep(1100); + return true; + } + + /* + * PCIe r4.0 sec 6.6.1, a component must enter LTSSM Detect within 20ms, + * after which we should expect an link active if the reset was + * successful. If so, software must wait a minimum 100ms before sending + * configuration requests to devices downstream this port. + * + * If the link fails to activate, either the device was physically + * removed or the link is permanently failed. + */ + if (active) + msleep(20); for (;;) { pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA); if (ret == active) - return true; + break; if (timeout <= 0) break; msleep(10); timeout -= 10; } - - pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", - active ? "set" : "cleared"); - - return false; + if (active && ret) + msleep(100); + else if (ret != active) + pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", + active ? "set" : "cleared"); + return ret == active; } void pci_reset_secondary_bus(struct pci_dev *dev) |