diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 116 |
1 files changed, 82 insertions, 34 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8abc843b1615..b1f563916036 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -777,6 +777,12 @@ static inline pci_power_t platform_pci_get_power_state(struct pci_dev *dev) return pci_platform_pm ? pci_platform_pm->get_state(dev) : PCI_UNKNOWN; } +static inline void platform_pci_refresh_power_state(struct pci_dev *dev) +{ + if (pci_platform_pm && pci_platform_pm->refresh_state) + pci_platform_pm->refresh_state(dev); +} + static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) { return pci_platform_pm ? @@ -938,6 +944,21 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state) } /** + * pci_refresh_power_state - Refresh the given device's power state data + * @dev: Target PCI device. + * + * Ask the platform to refresh the devices power state information and invoke + * pci_update_current_state() to update its current PCI power state. + */ +void pci_refresh_power_state(struct pci_dev *dev) +{ + if (platform_pci_power_manageable(dev)) + platform_pci_refresh_power_state(dev); + + pci_update_current_state(dev, dev->current_state); +} + +/** * pci_power_up - Put the given device into D0 forcibly * @dev: PCI device to power up */ @@ -1004,15 +1025,10 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) if (state == PCI_D0) { pci_platform_power_transition(dev, PCI_D0); /* - * Mandatory power management transition delays, see - * PCI Express Base Specification Revision 2.0 Section - * 6.6.1: Conventional Reset. Do not delay for - * devices powered on/off by corresponding bridge, - * because have already delayed for the bridge. + * Mandatory power management transition delays are + * handled in the PCIe portdrv resume hooks. */ if (dev->runtime_d3cold) { - if (dev->d3cold_delay && !dev->imm_ready) - msleep(dev->d3cold_delay); /* * When powering on a bridge from D3cold, the * whole hierarchy may be powered on into @@ -2065,6 +2081,13 @@ static void pci_pme_list_scan(struct work_struct *work) */ if (bridge && bridge->current_state != PCI_D0) continue; + /* + * If the device is in D3cold it should not be + * polled either. + */ + if (pme_dev->dev->current_state == PCI_D3cold) + continue; + pci_pme_wakeup(pme_dev->dev, NULL); } else { list_del(&pme_dev->list); @@ -2459,45 +2482,56 @@ bool pci_dev_run_wake(struct pci_dev *dev) EXPORT_SYMBOL_GPL(pci_dev_run_wake); /** - * pci_dev_keep_suspended - Check if the device can stay in the suspended state. + * pci_dev_need_resume - Check if it is necessary to resume the device. * @pci_dev: Device to check. * - * Return 'true' if the device is runtime-suspended, it doesn't have to be + * Return 'true' if the device is not runtime-suspended or it has to be * reconfigured due to wakeup settings difference between system and runtime - * suspend and the current power state of it is suitable for the upcoming - * (system) transition. - * - * If the device is not configured for system wakeup, disable PME for it before - * returning 'true' to prevent it from waking up the system unnecessarily. + * suspend, or the current power state of it is not suitable for the upcoming + * (system-wide) transition. */ -bool pci_dev_keep_suspended(struct pci_dev *pci_dev) +bool pci_dev_need_resume(struct pci_dev *pci_dev) { struct device *dev = &pci_dev->dev; - bool wakeup = device_may_wakeup(dev); + pci_power_t target_state; - if (!pm_runtime_suspended(dev) - || pci_target_state(pci_dev, wakeup) != pci_dev->current_state - || platform_pci_need_resume(pci_dev)) - return false; + if (!pm_runtime_suspended(dev) || platform_pci_need_resume(pci_dev)) + return true; + + target_state = pci_target_state(pci_dev, device_may_wakeup(dev)); /* - * At this point the device is good to go unless it's been configured - * to generate PME at the runtime suspend time, but it is not supposed - * to wake up the system. In that case, simply disable PME for it - * (it will have to be re-enabled on exit from system resume). - * - * If the device's power state is D3cold and the platform check above - * hasn't triggered, the device's configuration is suitable and we don't - * need to manipulate it at all. + * If the earlier platform check has not triggered, D3cold is just power + * removal on top of D3hot, so no need to resume the device in that + * case. */ + return target_state != pci_dev->current_state && + target_state != PCI_D3cold && + pci_dev->current_state != PCI_D3hot; +} + +/** + * pci_dev_adjust_pme - Adjust PME setting for a suspended device. + * @pci_dev: Device to check. + * + * If the device is suspended and it is not configured for system wakeup, + * disable PME for it to prevent it from waking up the system unnecessarily. + * + * Note that if the device's power state is D3cold and the platform check in + * pci_dev_need_resume() has not triggered, the device's configuration need not + * be changed. + */ +void pci_dev_adjust_pme(struct pci_dev *pci_dev) +{ + struct device *dev = &pci_dev->dev; + spin_lock_irq(&dev->power.lock); - if (pm_runtime_suspended(dev) && pci_dev->current_state < PCI_D3cold && - !wakeup) + if (pm_runtime_suspended(dev) && !device_may_wakeup(dev) && + pci_dev->current_state < PCI_D3cold) __pci_pme_active(pci_dev, false); spin_unlock_irq(&dev->power.lock); - return true; } /** @@ -4568,14 +4602,16 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS); } + /** - * pcie_wait_for_link - Wait until link is active or inactive + * pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? + * @delay: Delay to wait after link has become active (in ms) * * Use this to wait till link becomes active or inactive. */ -bool pcie_wait_for_link(struct pci_dev *pdev, bool active) +bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay) { int timeout = 1000; bool ret; @@ -4612,13 +4648,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active) timeout -= 10; } if (active && ret) - msleep(100); + msleep(delay); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", active ? "set" : "cleared"); return ret == active; } +/** + * pcie_wait_for_link - Wait until link is active or inactive + * @pdev: Bridge device + * @active: waiting for active or inactive? + * + * Use this to wait till link becomes active or inactive. + */ +bool pcie_wait_for_link(struct pci_dev *pdev, bool active) +{ + return pcie_wait_for_link_delay(pdev, active, 100); +} + void pci_reset_secondary_bus(struct pci_dev *dev) { u16 ctrl; |