diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 105 |
1 files changed, 76 insertions, 29 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1aa5d6f98ebd..3d1365f558d3 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -955,8 +955,10 @@ struct pci_acs { }; static void __pci_config_acs(struct pci_dev *dev, struct pci_acs *caps, - const char *p, u16 mask, u16 flags) + const char *p, const u16 acs_mask, const u16 acs_flags) { + u16 flags = acs_flags; + u16 mask = acs_mask; char *delimit; int ret = 0; @@ -964,7 +966,7 @@ static void __pci_config_acs(struct pci_dev *dev, struct pci_acs *caps, return; while (*p) { - if (!mask) { + if (!acs_mask) { /* Check for ACS flags */ delimit = strstr(p, "@"); if (delimit) { @@ -972,6 +974,8 @@ static void __pci_config_acs(struct pci_dev *dev, struct pci_acs *caps, u32 shift = 0; end = delimit - p - 1; + mask = 0; + flags = 0; while (end > -1) { if (*(p + end) == '0') { @@ -1028,10 +1032,14 @@ static void __pci_config_acs(struct pci_dev *dev, struct pci_acs *caps, pci_dbg(dev, "ACS mask = %#06x\n", mask); pci_dbg(dev, "ACS flags = %#06x\n", flags); + pci_dbg(dev, "ACS control = %#06x\n", caps->ctrl); + pci_dbg(dev, "ACS fw_ctrl = %#06x\n", caps->fw_ctrl); - /* If mask is 0 then we copy the bit from the firmware setting. */ - caps->ctrl = (caps->ctrl & ~mask) | (caps->fw_ctrl & mask); - caps->ctrl |= flags; + /* + * For mask bits that are 0, copy them from the firmware setting + * and apply flags for all the mask bits that are 1. + */ + caps->ctrl = (caps->fw_ctrl & ~mask) | (flags & mask); pci_info(dev, "Configured ACS to %#06x\n", caps->ctrl); } @@ -3015,8 +3023,12 @@ static const struct dmi_system_id bridge_d3_blacklist[] = { * pci_bridge_d3_possible - Is it possible to put the bridge into D3 * @bridge: Bridge to check * - * This function checks if it is possible to move the bridge to D3. - * Currently we only allow D3 for recent enough PCIe ports and Thunderbolt. + * Currently we only allow D3 for some PCIe ports and for Thunderbolt. + * + * Return: Whether it is possible to move the bridge to D3. + * + * The return value is guaranteed to be constant across the entire lifetime + * of the bridge, including its hot-removal. */ bool pci_bridge_d3_possible(struct pci_dev *bridge) { @@ -3060,10 +3072,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) return false; /* - * It should be safe to put PCIe ports from 2015 or newer - * to D3. + * Out of caution, we only allow PCIe ports from 2015 or newer + * into D3 on x86. */ - if (dmi_get_bios_year() >= 2015) + if (!IS_ENABLED(CONFIG_X86) || dmi_get_bios_year() >= 2015) return true; break; } @@ -3914,6 +3926,9 @@ EXPORT_SYMBOL(pci_enable_atomic_ops_to_root); */ void pci_release_region(struct pci_dev *pdev, int bar) { + if (!pci_bar_index_is_valid(bar)) + return; + /* * This is done for backwards compatibility, because the old PCI devres * API had a mode in which the function became managed if it had been @@ -3959,6 +3974,9 @@ EXPORT_SYMBOL(pci_release_region); static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name, int exclusive) { + if (!pci_bar_index_is_valid(bar)) + return -EINVAL; + if (pci_is_managed(pdev)) { if (exclusive == IORESOURCE_EXCLUSIVE) return pcim_request_region_exclusive(pdev, bar, res_name); @@ -4931,7 +4949,7 @@ int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type) delay); if (!pcie_wait_for_link_delay(dev, true, delay)) { /* Did not train, no need to wait any further */ - pci_info(dev, "Data Link Layer Link Active not set in 1000 msec\n"); + pci_info(dev, "Data Link Layer Link Active not set in %d msec\n", delay); return -ENOTTY; } @@ -5629,7 +5647,8 @@ static void pci_slot_unlock(struct pci_slot *slot) continue; if (dev->subordinate) pci_bus_unlock(dev->subordinate); - pci_dev_unlock(dev); + else + pci_dev_unlock(dev); } } @@ -6184,38 +6203,66 @@ u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev, EXPORT_SYMBOL(pcie_bandwidth_available); /** - * pcie_get_speed_cap - query for the PCI device's link speed capability + * pcie_get_supported_speeds - query Supported Link Speed Vector * @dev: PCI device to query * - * Query the PCI device speed capability. Return the maximum link speed - * supported by the device. + * Query @dev supported link speeds. + * + * Implementation Note in PCIe r6.0 sec 7.5.3.18 recommends determining + * supported link speeds using the Supported Link Speeds Vector in the Link + * Capabilities 2 Register (when available). + * + * Link Capabilities 2 was added in PCIe r3.0, sec 7.8.18. + * + * Without Link Capabilities 2, i.e., prior to PCIe r3.0, Supported Link + * Speeds field in Link Capabilities is used and only 2.5 GT/s and 5.0 GT/s + * speeds were defined. + * + * For @dev without Supported Link Speed Vector, the field is synthesized + * from the Max Link Speed field in the Link Capabilities Register. + * + * Return: Supported Link Speeds Vector (+ reserved 0 at LSB). */ -enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev) +u8 pcie_get_supported_speeds(struct pci_dev *dev) { u32 lnkcap2, lnkcap; + u8 speeds; /* - * Link Capabilities 2 was added in PCIe r3.0, sec 7.8.18. The - * implementation note there recommends using the Supported Link - * Speeds Vector in Link Capabilities 2 when supported. - * - * Without Link Capabilities 2, i.e., prior to PCIe r3.0, software - * should use the Supported Link Speeds field in Link Capabilities, - * where only 2.5 GT/s and 5.0 GT/s speeds were defined. + * Speeds retain the reserved 0 at LSB before PCIe Supported Link + * Speeds Vector to allow using SLS Vector bit defines directly. */ pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2); + speeds = lnkcap2 & PCI_EXP_LNKCAP2_SLS; + + /* Ignore speeds higher than Max Link Speed */ + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + speeds &= GENMASK(lnkcap & PCI_EXP_LNKCAP_SLS, 0); /* PCIe r3.0-compliant */ - if (lnkcap2) - return PCIE_LNKCAP2_SLS2SPEED(lnkcap2); + if (speeds) + return speeds; - pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + /* Synthesize from the Max Link Speed field */ if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_5_0GB) - return PCIE_SPEED_5_0GT; + speeds = PCI_EXP_LNKCAP2_SLS_5_0GB | PCI_EXP_LNKCAP2_SLS_2_5GB; else if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_2_5GB) - return PCIE_SPEED_2_5GT; + speeds = PCI_EXP_LNKCAP2_SLS_2_5GB; + + return speeds; +} - return PCI_SPEED_UNKNOWN; +/** + * pcie_get_speed_cap - query for the PCI device's link speed capability + * @dev: PCI device to query + * + * Query the PCI device speed capability. + * + * Return: the maximum link speed supported by the device. + */ +enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev) +{ + return PCIE_LNKCAP2_SLS2SPEED(dev->supported_speeds); } EXPORT_SYMBOL(pcie_get_speed_cap); |