diff options
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-qcom-common.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom-common.c | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.c b/drivers/pci/controller/dwc/pcie-qcom-common.c new file mode 100644 index 000000000000..3aad19b56da8 --- /dev/null +++ b/drivers/pci/controller/dwc/pcie-qcom-common.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/pci.h> + +#include "pcie-designware.h" +#include "pcie-qcom-common.h" + +void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci) +{ + u32 reg; + + /* + * GEN3_RELATED_OFF register is repurposed to apply equalization + * settings at various data transmission rates through registers namely + * GEN3_EQ_*. The RATE_SHADOW_SEL bit field of GEN3_RELATED_OFF + * determines the data rate for which these equalization settings are + * applied. + */ + reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF); + reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL; + reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK; + reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK, + GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT); + dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg); + + reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF); + reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 | + GEN3_EQ_FMDC_N_EVALS | + GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA | + GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA); + reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) | + FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) | + FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) | + FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5); + dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg); + + reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF); + reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE | + GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE | + GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL | + GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC); + dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg); +} +EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_equalization); + +void qcom_pcie_common_set_16gt_lane_margining(struct dw_pcie *pci) +{ + u32 reg; + + reg = dw_pcie_readl_dbi(pci, GEN4_LANE_MARGINING_1_OFF); + reg &= ~(MARGINING_MAX_VOLTAGE_OFFSET | + MARGINING_NUM_VOLTAGE_STEPS | + MARGINING_MAX_TIMING_OFFSET | + MARGINING_NUM_TIMING_STEPS); + reg |= FIELD_PREP(MARGINING_MAX_VOLTAGE_OFFSET, 0x24) | + FIELD_PREP(MARGINING_NUM_VOLTAGE_STEPS, 0x78) | + FIELD_PREP(MARGINING_MAX_TIMING_OFFSET, 0x32) | + FIELD_PREP(MARGINING_NUM_TIMING_STEPS, 0x10); + dw_pcie_writel_dbi(pci, GEN4_LANE_MARGINING_1_OFF, reg); + + reg = dw_pcie_readl_dbi(pci, GEN4_LANE_MARGINING_2_OFF); + reg |= MARGINING_IND_ERROR_SAMPLER | + MARGINING_SAMPLE_REPORTING_METHOD | + MARGINING_IND_LEFT_RIGHT_TIMING | + MARGINING_VOLTAGE_SUPPORTED; + reg &= ~(MARGINING_IND_UP_DOWN_VOLTAGE | + MARGINING_MAXLANES | + MARGINING_SAMPLE_RATE_TIMING | + MARGINING_SAMPLE_RATE_VOLTAGE); + reg |= FIELD_PREP(MARGINING_MAXLANES, pci->num_lanes) | + FIELD_PREP(MARGINING_SAMPLE_RATE_TIMING, 0x3f) | + FIELD_PREP(MARGINING_SAMPLE_RATE_VOLTAGE, 0x3f); + dw_pcie_writel_dbi(pci, GEN4_LANE_MARGINING_2_OFF, reg); +} +EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_lane_margining); |