1 files changed, 49 insertions, 0 deletions
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
new file mode 100644
index 000000000000..24322b92f200
--- /dev/null
+++ b/drivers/pci/controller/Makefile
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
+obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
+obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
+obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
+obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
+obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
+obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
+obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
+obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
+obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
+obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
+obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
+obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
+obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o
+obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
+obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
+obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
+obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
+obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
+obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
+obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
+obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
+obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
+obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
+obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
+obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
+obj-$(CONFIG_VMD) += vmd.o
+# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+obj-y				+= dwc/
+
+
+# The following drivers are for devices that use the generic ACPI
+# pci_root.c driver but don't support standard ECAM config access.
+# They contain MCFG quirks to replace the generic ECAM accessors with
+# device-specific ones that are shared with the DT driver.
+
+# The ACPI driver is generic and should not require driver-specific
+# config options to be enabled, so we always build these drivers on
+# ARM64 and use internal ifdefs to only build the pieces we need
+# depending on whether ACPI, the DT driver, or both are enabled.
+
+ifdef CONFIG_PCI
+obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
+obj-$(CONFIG_ARM64) += pci-thunder-pem.o
+obj-$(CONFIG_ARM64) += pci-xgene.o
+endif