summaryrefslogtreecommitdiff
path: root/drivers/parport/parport_serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parport/parport_serial.c')
-rw-r--r--drivers/parport/parport_serial.c122
1 files changed, 46 insertions, 76 deletions
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 087e847b1da2..ae9e01ef7599 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -1,30 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Support for common PCI multi-I/O cards (which is most of them)
*
* Copyright (C) 2001 Tim Waugh <twaugh@redhat.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *
* Multi-function PCI cards are supposed to present separate logical
* devices on the bus. A common thing to do seems to be to just use
* one logical device with lots of base address registers for both
* parallel ports and serial ports. This driver is for dealing with
* that.
- *
*/
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/parport.h>
#include <linux/parport_pc.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
#include <linux/8250_pci.h>
enum parport_pc_pci_cards {
@@ -65,6 +59,7 @@ enum parport_pc_pci_cards {
wch_ch353_1s1p,
wch_ch353_2s1p,
wch_ch382_2s1p,
+ brainboxes_5s1p,
sunix_2s1p,
};
@@ -153,6 +148,7 @@ static struct parport_pc_pci cards[] = {
/* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
/* wch_ch382_2s1p*/ { 1, { { 2, -1}, } },
+ /* brainboxes_5s1p */ { 1, { { 3, -1 }, } },
/* sunix_2s1p */ { 1, { { 3, -1 }, } },
};
@@ -258,6 +254,10 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
{ 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p},
+ /* BrainBoxes PX272/PX306 MIO card */
+ { PCI_VENDOR_ID_INTASHIELD, 0x4100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_5s1p },
+
/*
* More SUNIX variations. At least one of these has part number
* '5079A but subdevice 0x102. That board reports 0x0708 as
@@ -501,6 +501,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
.uart_offset = 8,
.first_offset = 0xC0,
},
+ [brainboxes_5s1p] = {
+ .flags = FL_BASE2,
+ .num_ports = 5,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
[sunix_2s1p] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
@@ -524,12 +530,10 @@ static int serial_register(struct pci_dev *dev, const struct pci_device_id *id)
struct serial_private *serial;
board = &pci_parport_serial_boards[id->driver_data];
-
if (board->num_ports == 0)
return 0;
serial = pciserial_init_ports(dev, board);
-
if (IS_ERR(serial))
return PTR_ERR(serial);
@@ -558,10 +562,9 @@ static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
int irq;
if (priv->num_par == ARRAY_SIZE (priv->port)) {
- printk (KERN_WARNING
- "parport_serial: %s: only %zu parallel ports "
- "supported (%d reported)\n", pci_name (dev),
- ARRAY_SIZE(priv->port), card->numports);
+ dev_warn(&dev->dev,
+ "only %zu parallel ports supported (%d reported)\n",
+ ARRAY_SIZE(priv->port), card->numports);
break;
}
@@ -577,12 +580,12 @@ static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
irq = dev->irq;
if (irq == IRQ_NONE) {
dev_dbg(&dev->dev,
- "PCI parallel port detected: I/O at %#lx(%#lx)\n",
+ "PCI parallel port detected: I/O at %#lx(%#lx)\n",
io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
dev_dbg(&dev->dev,
- "PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
+ "PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
io_lo, io_hi, irq);
}
port = parport_pc_probe_port (io_lo, io_hi, irq,
@@ -605,28 +608,26 @@ static int parport_serial_pci_probe(struct pci_dev *dev,
struct parport_serial_private *priv;
int err;
- priv = kzalloc (sizeof *priv, GFP_KERNEL);
+ priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+
pci_set_drvdata (dev, priv);
- err = pci_enable_device (dev);
- if (err) {
- kfree (priv);
+ err = pcim_enable_device(dev);
+ if (err)
return err;
- }
- if (parport_register (dev, id)) {
- kfree (priv);
- return -ENODEV;
- }
+ err = parport_register(dev, id);
+ if (err)
+ return err;
- if (serial_register (dev, id)) {
+ err = serial_register(dev, id);
+ if (err) {
int i;
for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]);
- kfree (priv);
- return -ENODEV;
+ return err;
}
return 0;
@@ -645,78 +646,47 @@ static void parport_serial_pci_remove(struct pci_dev *dev)
for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]);
- kfree (priv);
return;
}
-#ifdef CONFIG_PM
-static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
+static int __maybe_unused parport_serial_pci_suspend(struct device *dev)
{
- struct parport_serial_private *priv = pci_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct parport_serial_private *priv = pci_get_drvdata(pdev);
if (priv->serial)
pciserial_suspend_ports(priv->serial);
/* FIXME: What about parport? */
-
- pci_save_state(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
}
-static int parport_serial_pci_resume(struct pci_dev *dev)
+static int __maybe_unused parport_serial_pci_resume(struct device *dev)
{
- struct parport_serial_private *priv = pci_get_drvdata(dev);
- int err;
-
- pci_set_power_state(dev, PCI_D0);
- pci_restore_state(dev);
-
- /*
- * The device may have been disabled. Re-enable it.
- */
- err = pci_enable_device(dev);
- if (err) {
- printk(KERN_ERR "parport_serial: %s: error enabling "
- "device for resume (%d)\n", pci_name(dev), err);
- return err;
- }
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct parport_serial_private *priv = pci_get_drvdata(pdev);
if (priv->serial)
pciserial_resume_ports(priv->serial);
/* FIXME: What about parport? */
-
return 0;
}
-#endif
+
+static SIMPLE_DEV_PM_OPS(parport_serial_pm_ops,
+ parport_serial_pci_suspend, parport_serial_pci_resume);
static struct pci_driver parport_serial_pci_driver = {
.name = "parport_serial",
.id_table = parport_serial_pci_tbl,
.probe = parport_serial_pci_probe,
.remove = parport_serial_pci_remove,
-#ifdef CONFIG_PM
- .suspend = parport_serial_pci_suspend,
- .resume = parport_serial_pci_resume,
-#endif
+ .driver = {
+ .pm = &parport_serial_pm_ops,
+ },
};
-
-
-static int __init parport_serial_init (void)
-{
- return pci_register_driver (&parport_serial_pci_driver);
-}
-
-static void __exit parport_serial_exit (void)
-{
- pci_unregister_driver (&parport_serial_pci_driver);
- return;
-}
+module_pci_driver(parport_serial_pci_driver);
MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
MODULE_LICENSE("GPL");
-
-module_init(parport_serial_init);
-module_exit(parport_serial_exit);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 02:07:50 +0300