1 files changed, 101 insertions, 0 deletions

diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index 06f0f632ec47..62504b18f198 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -20,6 +20,7 @@
 #include <linux/pm_domain.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <linux/energy_model.h>
 
 #include "opp.h"
 
@@ -594,6 +595,8 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
 		new_opp->rate = (unsigned long)rate;
 	}
 
+	of_property_read_u32(np, "opp-level", &new_opp->level);
+
 	/* Check if the OPP supports hardware's hierarchy of versions or not */
 	if (!_opp_is_supported(dev, opp_table, np)) {
 		dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
@@ -1047,3 +1050,101 @@ struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp)
 	return of_node_get(opp->np);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_of_node);
+
+/*
+ * Callback function provided to the Energy Model framework upon registration.
+ * This computes the power estimated by @CPU at @kHz if it is the frequency
+ * of an existing OPP, or at the frequency of the first OPP above @kHz otherwise
+ * (see dev_pm_opp_find_freq_ceil()). This function updates @kHz to the ceiled
+ * frequency and @mW to the associated power. The power is estimated as
+ * P = C * V^2 * f with C being the CPU's capacitance and V and f respectively
+ * the voltage and frequency of the OPP.
+ *
+ * Returns -ENODEV if the CPU device cannot be found, -EINVAL if the power
+ * calculation failed because of missing parameters, 0 otherwise.
+ */
+static int __maybe_unused _get_cpu_power(unsigned long *mW, unsigned long *kHz,
+					 int cpu)
+{
+	struct device *cpu_dev;
+	struct dev_pm_opp *opp;
+	struct device_node *np;
+	unsigned long mV, Hz;
+	u32 cap;
+	u64 tmp;
+	int ret;
+
+	cpu_dev = get_cpu_device(cpu);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	np = of_node_get(cpu_dev->of_node);
+	if (!np)
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "dynamic-power-coefficient", &cap);
+	of_node_put(np);
+	if (ret)
+		return -EINVAL;
+
+	Hz = *kHz * 1000;
+	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &Hz);
+	if (IS_ERR(opp))
+		return -EINVAL;
+
+	mV = dev_pm_opp_get_voltage(opp) / 1000;
+	dev_pm_opp_put(opp);
+	if (!mV)
+		return -EINVAL;
+
+	tmp = (u64)cap * mV * mV * (Hz / 1000000);
+	do_div(tmp, 1000000000);
+
+	*mW = (unsigned long)tmp;
+	*kHz = Hz / 1000;
+
+	return 0;
+}
+
+/**
+ * dev_pm_opp_of_register_em() - Attempt to register an Energy Model
+ * @cpus	: CPUs for which an Energy Model has to be registered
+ *
+ * This checks whether the "dynamic-power-coefficient" devicetree property has
+ * been specified, and tries to register an Energy Model with it if it has.
+ */
+void dev_pm_opp_of_register_em(struct cpumask *cpus)
+{
+	struct em_data_callback em_cb = EM_DATA_CB(_get_cpu_power);
+	int ret, nr_opp, cpu = cpumask_first(cpus);
+	struct device *cpu_dev;
+	struct device_node *np;
+	u32 cap;
+
+	cpu_dev = get_cpu_device(cpu);
+	if (!cpu_dev)
+		return;
+
+	nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
+	if (nr_opp <= 0)
+		return;
+
+	np = of_node_get(cpu_dev->of_node);
+	if (!np)
+		return;
+
+	/*
+	 * Register an EM only if the 'dynamic-power-coefficient' property is
+	 * set in devicetree. It is assumed the voltage values are known if that
+	 * property is set since it is useless otherwise. If voltages are not
+	 * known, just let the EM registration fail with an error to alert the
+	 * user about the inconsistent configuration.
+	 */
+	ret = of_property_read_u32(np, "dynamic-power-coefficient", &cap);
+	of_node_put(np);
+	if (ret || !cap)
+		return;
+
+	em_register_perf_domain(cpus, nr_opp, &em_cb);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_register_em);