diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/can/Kconfig | 60 | ||||
| -rw-r--r-- | drivers/net/can/dev.c | 6 | ||||
| -rw-r--r-- | drivers/net/can/sja1000/Kconfig | 47 | ||||
| -rw-r--r-- | drivers/net/can/usb/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/net/can/usb/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/davinci_emac.c | 3 | ||||
| -rw-r--r-- | drivers/net/forcedeth.c | 5 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 1 | ||||
| -rw-r--r-- | drivers/net/ppp_generic.c | 11 | ||||
| -rw-r--r-- | drivers/net/r6040.c | 2 | ||||
| -rw-r--r-- | drivers/net/r8169.c | 4 | ||||
| -rw-r--r-- | drivers/net/s2io.c | 1 | ||||
| -rw-r--r-- | drivers/net/smsc911x.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/ipw2100.c | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/ipw2200.c | 141 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/libipw.h | 8 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/libipw_module.c | 42 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54usb.c | 10 |
18 files changed, 129 insertions, 232 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index c16e6ff139d0..732b093e0815 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -35,63 +35,9 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. -config CAN_SJA1000 - depends on CAN_DEV && HAS_IOMEM - tristate "Philips SJA1000" - ---help--- - Driver for the SJA1000 CAN controllers from Philips or NXP - -config CAN_SJA1000_ISA - depends on CAN_SJA1000 && ISA - tristate "ISA Bus based legacy SJA1000 driver" - ---help--- - This driver adds legacy support for SJA1000 chips connected to - the ISA bus using I/O port, memory mapped or indirect access. - -config CAN_SJA1000_PLATFORM - depends on CAN_SJA1000 - tristate "Generic Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the "platform bus" (Linux abstraction for directly to the - processor attached devices). Which can be found on various - boards from Phytec (http://www.phytec.de) like the PCM027, - PCM038. - -config CAN_SJA1000_OF_PLATFORM - depends on CAN_SJA1000 && PPC_OF - tristate "Generic OF Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the OpenFirmware "platform bus" found on embedded systems with - OpenFirmware bindings, e.g. if you have a PowerPC based system - you may want to enable this option. - -config CAN_EMS_PCI - tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the one, two or four channel CPC-PCI, - CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche - (http://www.ems-wuensche.de). - -config CAN_EMS_USB - tristate "EMS CPC-USB/ARM7 CAN/USB interface" - depends on USB && CAN_DEV - ---help--- - This driver is for the one channel CPC-USB/ARM7 CAN/USB interface - from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). - -config CAN_KVASER_PCI - tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or - 4 channel) from Kvaser (http://www.kvaser.com). - config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN && CAN_DEV && ARCH_AT91SAM9263 + depends on CAN_DEV && ARCH_AT91SAM9263 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. @@ -127,6 +73,10 @@ config CAN_MPC52XX This driver can also be built as a module. If so, the module will be called mpc5xxx_can. +source "drivers/net/can/sja1000/Kconfig" + +source "drivers/net/can/usb/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 26c89aaeba62..c1bb29f0322b 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -677,6 +677,11 @@ nla_put_failure: return -EMSGSIZE; } +static size_t can_get_xstats_size(const struct net_device *dev) +{ + return sizeof(struct can_device_stats); +} + static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -705,6 +710,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .changelink = can_changelink, .get_size = can_get_size, .fill_info = can_fill_info, + .get_xstats_size = can_get_xstats_size, .fill_xstats = can_fill_xstats, }; diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig new file mode 100644 index 000000000000..4c674927f247 --- /dev/null +++ b/drivers/net/can/sja1000/Kconfig @@ -0,0 +1,47 @@ +menuconfig CAN_SJA1000 + tristate "Philips/NXP SJA1000 devices" + depends on CAN_DEV && HAS_IOMEM + +if CAN_SJA1000 + +config CAN_SJA1000_ISA + tristate "ISA Bus based legacy SJA1000 driver" + depends on ISA + ---help--- + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + +config CAN_SJA1000_PLATFORM + tristate "Generic Platform Bus based SJA1000 driver" + ---help--- + This driver adds support for the SJA1000 chips connected to + the "platform bus" (Linux abstraction for directly to the + processor attached devices). Which can be found on various + boards from Phytec (http://www.phytec.de) like the PCM027, + PCM038. + +config CAN_SJA1000_OF_PLATFORM + tristate "Generic OF Platform Bus based SJA1000 driver" + depends on PPC_OF + ---help--- + This driver adds support for the SJA1000 chips connected to + the OpenFirmware "platform bus" found on embedded systems with + OpenFirmware bindings, e.g. if you have a PowerPC based system + you may want to enable this option. + +config CAN_EMS_PCI + tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" + depends on PCI + ---help--- + This driver is for the one, two or four channel CPC-PCI, + CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche + (http://www.ems-wuensche.de). + +config CAN_KVASER_PCI + tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" + depends on PCI + ---help--- + This driver is for the the PCIcanx and PCIcan cards (1, 2 or + 4 channel) from Kvaser (http://www.kvaser.com). + +endif diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig new file mode 100644 index 000000000000..bbc78e0b8a15 --- /dev/null +++ b/drivers/net/can/usb/Kconfig @@ -0,0 +1,10 @@ +menu "CAN USB interfaces" + depends on USB && CAN_DEV + +config CAN_EMS_USB + tristate "EMS CPC-USB/ARM7 CAN/USB interface" + ---help--- + This driver is for the one channel CPC-USB/ARM7 CAN/USB interface + from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). + +endmenu diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index c3f75ba701b1..0afd51d4c7a5 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -3,3 +3,5 @@ # obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 79ce8e857eab..8edac8915ea8 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2136,9 +2136,6 @@ static int emac_poll(struct napi_struct *napi, int budget) u32 status = 0; u32 num_pkts = 0; - if (!netif_running(ndev)) - return 0; - /* Check interrupt vectors and call packet processing */ status = emac_read(EMAC_MACINVECTOR); diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0a1c2bb27d4d..73fe97777201 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5820,10 +5820,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr); dev_printk(KERN_ERR, &pci_dev->dev, "Please complain to your hardware vendor. Switching to a random MAC.\n"); - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x00; - dev->dev_addr[2] = 0x6c; - get_random_bytes(&dev->dev_addr[3], 3); + random_ether_addr(dev->dev_addr); } dprintk(KERN_DEBUG "%s: MAC Address %pM\n", diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 884152d1085e..dceed80f16fb 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5988,6 +5988,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) } else { pci_set_master(pdev); pci_restore_state(pdev); + pci_save_state(pdev); pci_wake_from_d3(pdev, false); diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 9bf2a6be9031..965adb6174c3 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1944,8 +1944,15 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) } /* Pull completed packets off the queue and receive them. */ - while ((skb = ppp_mp_reconstruct(ppp))) - ppp_receive_nonmp_frame(ppp, skb); + while ((skb = ppp_mp_reconstruct(ppp))) { + if (pskb_may_pull(skb, 2)) + ppp_receive_nonmp_frame(ppp, skb); + else { + ++ppp->dev->stats.rx_length_errors; + kfree_skb(skb); + ppp_receive_error(ppp); + } + } return; diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 7dfcb58b0eb4..8b14c6eda7c3 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -1085,7 +1085,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, int bar = 0; u16 *adrp; - printk(KERN_INFO "%s\n", version); + printk("%s\n", version); err = pci_enable_device(pdev); if (err) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 1b0aa4cf89bc..98f6c51b7608 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3243,9 +3243,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) static void rtl8169_set_rxbufsize(struct rtl8169_private *tp, struct net_device *dev) { - unsigned int mtu = dev->mtu; + unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE; } static int rtl8169_open(struct net_device *dev) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ddccf5fa56b6..0dd7839322bc 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3494,6 +3494,7 @@ static void s2io_reset(struct s2io_nic *sp) /* Restore the PCI state saved during initialization. */ pci_restore_state(sp->pdev); + pci_save_state(sp->pdev); pci_read_config_word(sp->pdev, 0x2, &val16); if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) break; diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 6a9f51d1d9f2..7f01e60d5172 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -986,7 +986,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) struct net_device *dev = pdata->dev; int npackets = 0; - while (likely(netif_running(dev)) && (npackets < budget)) { + while (npackets < budget) { unsigned int pktlength; unsigned int pktwords; struct sk_buff *skb; diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1e6979..6e2fc0cb6f8a 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6029,7 +6029,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, struct ipw2100_priv *priv; struct net_device *dev; - dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0); + dev = alloc_ieee80211(sizeof(struct ipw2100_priv)); if (!dev) return NULL; priv = libipw_priv(dev); @@ -6342,7 +6342,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); - free_ieee80211(dev, 0); + free_ieee80211(dev); pci_set_drvdata(pci_dev, NULL); } @@ -6400,7 +6400,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) if (dev->base_addr) iounmap((void __iomem *)dev->base_addr); - free_ieee80211(dev, 0); + free_ieee80211(dev); } pci_release_regions(pci_dev); diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 61ef8904af97..5c6ff58732d5 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -103,25 +103,6 @@ static int antenna = CFG_SYS_ANTENNA_BOTH; static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */ #endif -static struct ieee80211_rate ipw2200_rates[] = { - { .bitrate = 10 }, - { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 60 }, - { .bitrate = 90 }, - { .bitrate = 120 }, - { .bitrate = 180 }, - { .bitrate = 240 }, - { .bitrate = 360 }, - { .bitrate = 480 }, - { .bitrate = 540 } -}; - -#define ipw2200_a_rates (ipw2200_rates + 4) -#define ipw2200_num_a_rates 8 -#define ipw2200_bg_rates (ipw2200_rates + 0) -#define ipw2200_num_bg_rates 12 #ifdef CONFIG_IPW2200_QOS static int qos_enable = 0; @@ -8673,6 +8654,24 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option) * */ +static int ipw_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = libipw_priv(dev); + mutex_lock(&priv->mutex); + if (priv->status & STATUS_RF_KILL_MASK) + strcpy(wrqu->name, "radio off"); + else if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c", + ipw_modes[priv->assoc_request.ieee_mode]); + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + mutex_unlock(&priv->mutex); + return 0; +} + static int ipw_set_channel(struct ipw_priv *priv, u8 channel) { if (channel == 0) { @@ -9972,7 +9971,7 @@ static int ipw_wx_sw_reset(struct net_device *dev, /* Rebase the WE IOCTLs to zero for the handler array */ #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT] static iw_handler ipw_wx_handlers[] = { - IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname, + IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name, IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq, IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq, IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode, @@ -11417,100 +11416,16 @@ static void ipw_bg_down(struct work_struct *work) /* Called by register_netdev() */ static int ipw_net_init(struct net_device *dev) { - int i, rc = 0; struct ipw_priv *priv = libipw_priv(dev); - const struct libipw_geo *geo = libipw_get_geo(priv->ieee); - struct wireless_dev *wdev = &priv->ieee->wdev; mutex_lock(&priv->mutex); if (ipw_up(priv)) { - rc = -EIO; - goto out; - } - - memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); - - /* fill-out priv->ieee->bg_band */ - if (geo->bg_channels) { - struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; - - bg_band->band = IEEE80211_BAND_2GHZ; - bg_band->n_channels = geo->bg_channels; - bg_band->channels = - kzalloc(geo->bg_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to bg_band.channels */ - for (i = 0; i < geo->bg_channels; i++) { - bg_band->channels[i].band = IEEE80211_BAND_2GHZ; - bg_band->channels[i].center_freq = geo->bg[i].freq; - bg_band->channels[i].hw_value = geo->bg[i].channel; - bg_band->channels[i].max_power = geo->bg[i].max_power; - if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) - bg_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) - bg_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) - bg_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - bg_band->bitrates = ipw2200_bg_rates; - bg_band->n_bitrates = ipw2200_num_bg_rates; - - wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band; - } - - /* fill-out priv->ieee->a_band */ - if (geo->a_channels) { - struct ieee80211_supported_band *a_band = &priv->ieee->a_band; - - a_band->band = IEEE80211_BAND_5GHZ; - a_band->n_channels = geo->a_channels; - a_band->channels = - kzalloc(geo->a_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to a_band.channels */ - for (i = 0; i < geo->a_channels; i++) { - a_band->channels[i].band = IEEE80211_BAND_2GHZ; - a_band->channels[i].center_freq = geo->a[i].freq; - a_band->channels[i].hw_value = geo->a[i].channel; - a_band->channels[i].max_power = geo->a[i].max_power; - if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY) - a_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->a[i].flags & LIBIPW_CH_NO_IBSS) - a_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT) - a_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - a_band->bitrates = ipw2200_a_rates; - a_band->n_bitrates = ipw2200_num_a_rates; - - wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band; - } - - set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); - - /* With that information in place, we can now register the wiphy... */ - if (wiphy_register(wdev->wiphy)) { - rc = -EIO; - goto out; + mutex_unlock(&priv->mutex); + return -EIO; } -out: mutex_unlock(&priv->mutex); - return rc; + return 0; } /* PCI driver stuff */ @@ -11641,7 +11556,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) if (priv->prom_net_dev) return -EPERM; - priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1); + priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv)); if (priv->prom_net_dev == NULL) return -ENOMEM; @@ -11660,7 +11575,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) rc = register_netdev(priv->prom_net_dev); if (rc) { - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; return rc; } @@ -11674,7 +11589,7 @@ static void ipw_prom_free(struct ipw_priv *priv) return; unregister_netdev(priv->prom_net_dev); - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; } @@ -11702,7 +11617,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, struct ipw_priv *priv; int i; - net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0); + net_dev = alloc_ieee80211(sizeof(struct ipw_priv)); if (net_dev == NULL) { err = -ENOMEM; goto out; @@ -11850,7 +11765,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); out_free_ieee80211: - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); out: return err; } @@ -11917,7 +11832,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); free_firmware(); } diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391172f3..1e334ff6bd52 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -31,7 +31,6 @@ #include <linux/ieee80211.h> #include <net/lib80211.h> -#include <net/cfg80211.h> #define LIBIPW_VERSION "git-1.1.13" @@ -784,15 +783,12 @@ struct libipw_geo { struct libipw_device { struct net_device *dev; - struct wireless_dev wdev; struct libipw_security sec; /* Bookkeeping structures */ struct libipw_stats ieee_stats; struct libipw_geo geo; - struct ieee80211_supported_band bg_band; - struct ieee80211_supported_band a_band; /* Probe / Beacon management */ struct list_head network_free_list; @@ -1018,8 +1014,8 @@ static inline int libipw_is_cck_rate(u8 rate) } /* ieee80211.c */ -extern void free_ieee80211(struct net_device *dev, int monitor); -extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void free_ieee80211(struct net_device *dev); +extern struct net_device *alloc_ieee80211(int sizeof_priv); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6aed7da..eb2b60834c17 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -62,9 +62,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -struct cfg80211_ops libipw_config_ops = { }; -void *libipw_wiphy_privid = &libipw_wiphy_privid; - static int libipw_networks_allocate(struct libipw_device *ieee) { if (ieee->networks) @@ -143,7 +140,7 @@ int libipw_change_mtu(struct net_device *dev, int new_mtu) } EXPORT_SYMBOL(libipw_change_mtu); -struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) +struct net_device *alloc_ieee80211(int sizeof_priv) { struct libipw_device *ieee; struct net_device *dev; @@ -160,31 +157,10 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) ieee->dev = dev; - if (!monitor) { - ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0); - if (!ieee->wdev.wiphy) { - LIBIPW_ERROR("Unable to allocate wiphy.\n"); - goto failed_free_netdev; - } - - ieee->dev->ieee80211_ptr = &ieee->wdev; - ieee->wdev.iftype = NL80211_IFTYPE_STATION; - - /* Fill-out wiphy structure bits we know... Not enough info - here to call set_wiphy_dev or set MAC address or channel info - -- have to do that in ->ndo_init... */ - ieee->wdev.wiphy->privid = libipw_wiphy_privid; - - ieee->wdev.wiphy->max_scan_ssids = 1; - ieee->wdev.wiphy->max_scan_ie_len = 0; - ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) - | BIT(NL80211_IFTYPE_ADHOC); - } - err = libipw_networks_allocate(ieee); if (err) { LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err); - goto failed_free_wiphy; + goto failed_free_netdev; } libipw_networks_initialize(ieee); @@ -217,31 +193,19 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) return dev; -failed_free_wiphy: - if (!monitor) - wiphy_free(ieee->wdev.wiphy); failed_free_netdev: free_netdev(dev); failed: return NULL; } -void free_ieee80211(struct net_device *dev, int monitor) +void free_ieee80211(struct net_device *dev) { struct libipw_device *ieee = netdev_priv(dev); lib80211_crypt_info_free(&ieee->crypt_info); libipw_networks_free(ieee); - - /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); - wiphy_free(ieee->wdev.wiphy); - } - free_netdev(dev); } diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 17e199546eeb..92af9b96bb7a 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -426,12 +426,16 @@ static const char p54u_romboot_3887[] = "~~~~"; static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; - u8 buf[4]; + u8 *buf; int ret; - memcpy(&buf, p54u_romboot_3887, sizeof(buf)); + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + memcpy(buf, p54u_romboot_3887, 4); ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, - buf, sizeof(buf)); + buf, 4); + kfree(buf); if (ret) dev_err(&priv->udev->dev, "(p54usb) unable to jump to " "boot ROM (%d)!\n", ret); |