diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/airo_cs.c | 71 | ||||
| -rw-r--r-- | drivers/net/wireless/atmel_cs.c | 69 | ||||
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_cs.c | 8 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/if_cs.c | 30 | ||||
| -rw-r--r-- | drivers/net/wireless/orinoco/orinoco_cs.c | 44 | ||||
| -rw-r--r-- | drivers/net/wireless/orinoco/spectrum_cs.c | 44 | ||||
| -rw-r--r-- | drivers/net/wireless/ray_cs.c | 35 | ||||
| -rw-r--r-- | drivers/net/wireless/wl3501_cs.c | 35 |
8 files changed, 1 insertions, 335 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index b084278f36b7..df2484d45474 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -53,42 +53,15 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the airo_cs - event handler. -*/ - static int airo_config(struct pcmcia_device *link); static void airo_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void airo_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - airo_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; @@ -106,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev) return airo_config(p_dev); } /* airo_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void airo_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_detach\n"); @@ -129,14 +93,6 @@ static void airo_detach(struct pcmcia_device *link) kfree(link->priv); } /* airo_detach */ -/*====================================================================== - - airo_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -158,20 +114,6 @@ static int airo_config(struct pcmcia_device *link) link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ ret = pcmcia_loop_config(link, airo_cs_config_check, NULL); if (ret) goto failed; @@ -179,11 +121,6 @@ static int airo_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -200,14 +137,6 @@ static int airo_config(struct pcmcia_device *link) return -ENODEV; } /* airo_config */ -/*====================================================================== - - After a card is removed, airo_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void airo_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_release\n"); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index fabe91a8db2b..c96e19da2949 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -63,42 +63,15 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the atmel_cs - event handler. -*/ - static int atmel_config(struct pcmcia_device *link); static void atmel_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void atmel_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - atmel_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; @@ -116,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) return atmel_config(p_dev); } /* atmel_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void atmel_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "atmel_detach\n"); @@ -134,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link) kfree(link->priv); } -/*====================================================================== - - atmel_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) @@ -176,18 +132,6 @@ static int atmel_config(struct pcmcia_device *link) link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; @@ -196,11 +140,6 @@ static int atmel_config(struct pcmcia_device *link) goto failed; } - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -223,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link) return -ENODEV; } -/*====================================================================== - - After a card is removed, atmel_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba645701179a..bd8a4134edeb 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -466,9 +466,6 @@ static void prism2_detach(struct pcmcia_device *link) } -/* run after a CARD_INSERTION event is received to configure the PCMCIA - * socket and make the device available to the system */ - static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -530,11 +527,6 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed_unlock; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index c2bd2f0304bb..ff1280f41336 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -760,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv, } -/********************************************************************/ -/* Card Services */ -/********************************************************************/ - -/* - * After a card is removed, if_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void if_cs_release(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -784,16 +775,6 @@ static void if_cs_release(struct pcmcia_device *p_dev) } -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. - */ - static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; @@ -849,11 +830,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; } - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(p_dev); if (ret) { lbs_pr_err("error in pcmcia_enable_device\n"); @@ -950,12 +926,6 @@ out: } -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void if_cs_detach(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 2b1f554af0b2..71b3d68b9403 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -92,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { @@ -119,12 +111,6 @@ orinoco_cs_probe(struct pcmcia_device *link) return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -136,12 +122,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -158,20 +138,6 @@ orinoco_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) @@ -199,11 +165,6 @@ orinoco_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -228,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link) return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 1314cf204f12..fb859a5ad2eb 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -153,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int spectrum_cs_probe(struct pcmcia_device *link) { @@ -181,12 +173,6 @@ spectrum_cs_probe(struct pcmcia_device *link) return spectrum_cs_config(link); } /* spectrum_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void spectrum_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -198,12 +184,6 @@ static void spectrum_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* spectrum_cs_detach */ -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int spectrum_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { @@ -221,20 +201,6 @@ spectrum_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) @@ -263,11 +229,6 @@ spectrum_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); hw->eeprom_pda = true; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -296,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link) return -ENODEV; } /* spectrum_cs_config */ -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void spectrum_cs_release(struct pcmcia_device *link) { diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index b5a2c9e31de2..af5b17ce5a15 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -168,13 +168,6 @@ static int bc; */ static char *phy_addr = NULL; - -/* A struct pcmcia_device structure has fields for most things that are needed - to keep track of a socket, but there will usually be some device - specific information that also needs to be kept track of. The - 'priv' pointer in a struct pcmcia_device structure can be used to point to - a device-specific private data structure, like this. -*/ static unsigned int ray_mem_speed = 500; /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */ @@ -289,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*============================================================================= - ray_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -=============================================================================*/ static int ray_probe(struct pcmcia_device *p_dev) { ray_dev_t *local; @@ -351,12 +336,6 @@ fail_alloc_dev: return -ENOMEM; } /* ray_attach */ -/*============================================================================= - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -=============================================================================*/ static void ray_detach(struct pcmcia_device *link) { struct net_device *dev; @@ -379,11 +358,6 @@ static void ray_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "ray_cs ray_detach ending\n"); } /* ray_detach */ -/*============================================================================= - ray_config() is run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -=============================================================================*/ #define MAX_TUPLE_SIZE 128 static int ray_config(struct pcmcia_device *link) { @@ -409,9 +383,6 @@ static int ray_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - /* This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -771,11 +742,7 @@ static void join_net(u_long data) local->card_status = CARD_DOING_ACQ; } -/*============================================================================ - After a card is removed, ray_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -=============================================================================*/ + static void ray_release(struct pcmcia_device *link) { struct net_device *dev = link->priv; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index d3ed38f558fa..ca3f8961fa27 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -77,13 +77,6 @@ #define WL3501_RESUME 0 #define WL3501_SUSPEND 1 -/* - * The event() function is this driver's Card Services event handler. It will - * be called by Card Services when an appropriate card status event is - * received. The config() and release() entry points are used to configure or - * release a socket, in response to card insertion and ejection events. They - * are invoked from the wl24 event handler. - */ static int wl3501_config(struct pcmcia_device *link); static void wl3501_release(struct pcmcia_device *link); @@ -1868,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/** - * wl3501_attach - creates an "instance" of the driver - * - * Creates an "instance" of the driver, allocating local data structures for - * one device. The device is registered with Card Services. - * - * The dev_link structure is initialized, but we don't actually configure the - * card at this point -- we wait until we receive a card insertion event. - */ static int wl3501_probe(struct pcmcia_device *p_dev) { struct net_device *dev; @@ -1912,14 +1896,6 @@ out_link: return -ENOMEM; } -/** - * wl3501_config - configure the PCMCIA socket and make eth device available - * @link - FILL_IN - * - * wl3501_config() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - */ static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1950,9 +1926,6 @@ static int wl3501_config(struct pcmcia_device *link) if (ret) goto failed; - /* This actually configures the PCMCIA socket -- setting up the I/O - * windows and the interrupt mapping. */ - ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -2008,14 +1981,6 @@ failed: return -ENODEV; } -/** - * wl3501_release - unregister the net, release PCMCIA configuration - * @arg - link - * - * After a card is removed, wl3501_release() will unregister the net device, - * and release the PCMCIA configuration. If the device is still open, this - * will be postponed until it is closed. - */ static void wl3501_release(struct pcmcia_device *link) { pcmcia_disable_device(link); |