diff options
Diffstat (limited to 'drivers/net/wireless/st/cw1200/fwio.c')
| -rw-r--r-- | drivers/net/wireless/st/cw1200/fwio.c | 526 |
1 files changed, 526 insertions, 0 deletions
diff --git a/drivers/net/wireless/st/cw1200/fwio.c b/drivers/net/wireless/st/cw1200/fwio.c new file mode 100644 index 000000000000..30e7646d04af --- /dev/null +++ b/drivers/net/wireless/st/cw1200/fwio.c @@ -0,0 +1,526 @@ +/* + * Firmware I/O code for mac80211 ST-Ericsson CW1200 drivers + * + * Copyright (c) 2010, ST-Ericsson + * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> + * + * Based on: + * ST-Ericsson UMAC CW1200 driver which is + * Copyright (c) 2010, ST-Ericsson + * Author: Ajitpal Singh <ajitpal.singh@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/vmalloc.h> +#include <linux/sched.h> +#include <linux/firmware.h> + +#include "cw1200.h" +#include "fwio.h" +#include "hwio.h" +#include "hwbus.h" +#include "bh.h" + +static int cw1200_get_hw_type(u32 config_reg_val, int *major_revision) +{ + int hw_type = -1; + u32 silicon_type = (config_reg_val >> 24) & 0x7; + u32 silicon_vers = (config_reg_val >> 31) & 0x1; + + switch (silicon_type) { + case 0x00: + *major_revision = 1; + hw_type = HIF_9000_SILICON_VERSATILE; + break; + case 0x01: + case 0x02: /* CW1x00 */ + case 0x04: /* CW1x60 */ + *major_revision = silicon_type; + if (silicon_vers) + hw_type = HIF_8601_VERSATILE; + else + hw_type = HIF_8601_SILICON; + break; + default: + break; + } + + return hw_type; +} + +static int cw1200_load_firmware_cw1200(struct cw1200_common *priv) +{ + int ret, block, num_blocks; + unsigned i; + u32 val32; + u32 put = 0, get = 0; + u8 *buf = NULL; + const char *fw_path; + const struct firmware *firmware = NULL; + + /* Macroses are local. */ +#define APB_WRITE(reg, val) \ + do { \ + ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \ + if (ret < 0) \ + goto exit; \ + } while (0) +#define APB_WRITE2(reg, val) \ + do { \ + ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \ + if (ret < 0) \ + goto free_buffer; \ + } while (0) +#define APB_READ(reg, val) \ + do { \ + ret = cw1200_apb_read_32(priv, CW1200_APB(reg), &(val)); \ + if (ret < 0) \ + goto free_buffer; \ + } while (0) +#define REG_WRITE(reg, val) \ + do { \ + ret = cw1200_reg_write_32(priv, (reg), (val)); \ + if (ret < 0) \ + goto exit; \ + } while (0) +#define REG_READ(reg, val) \ + do { \ + ret = cw1200_reg_read_32(priv, (reg), &(val)); \ + if (ret < 0) \ + goto exit; \ + } while (0) + + switch (priv->hw_revision) { + case CW1200_HW_REV_CUT10: + fw_path = FIRMWARE_CUT10; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_10; + break; + case CW1200_HW_REV_CUT11: + fw_path = FIRMWARE_CUT11; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_11; + break; + case CW1200_HW_REV_CUT20: + fw_path = FIRMWARE_CUT20; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_20; + break; + case CW1200_HW_REV_CUT22: + fw_path = FIRMWARE_CUT22; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_22; + break; + case CW1X60_HW_REV: + fw_path = FIRMWARE_CW1X60; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_CW1X60; + break; + default: + pr_err("Invalid silicon revision %d.\n", priv->hw_revision); + return -EINVAL; + } + + /* Initialize common registers */ + APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, DOWNLOAD_ARE_YOU_HERE); + APB_WRITE(DOWNLOAD_PUT_REG, 0); + APB_WRITE(DOWNLOAD_GET_REG, 0); + APB_WRITE(DOWNLOAD_STATUS_REG, DOWNLOAD_PENDING); + APB_WRITE(DOWNLOAD_FLAGS_REG, 0); + + /* Write the NOP Instruction */ + REG_WRITE(ST90TDS_SRAM_BASE_ADDR_REG_ID, 0xFFF20000); + REG_WRITE(ST90TDS_AHB_DPORT_REG_ID, 0xEAFFFFFE); + + /* Release CPU from RESET */ + REG_READ(ST90TDS_CONFIG_REG_ID, val32); + val32 &= ~ST90TDS_CONFIG_CPU_RESET_BIT; + REG_WRITE(ST90TDS_CONFIG_REG_ID, val32); + + /* Enable Clock */ + val32 &= ~ST90TDS_CONFIG_CPU_CLK_DIS_BIT; + REG_WRITE(ST90TDS_CONFIG_REG_ID, val32); + + /* Load a firmware file */ + ret = request_firmware(&firmware, fw_path, priv->pdev); + if (ret) { + pr_err("Can't load firmware file %s.\n", fw_path); + goto exit; + } + + buf = kmalloc(DOWNLOAD_BLOCK_SIZE, GFP_KERNEL | GFP_DMA); + if (!buf) { + pr_err("Can't allocate firmware load buffer.\n"); + ret = -ENOMEM; + goto firmware_release; + } + + /* Check if the bootloader is ready */ + for (i = 0; i < 100; i += 1 + i / 2) { + APB_READ(DOWNLOAD_IMAGE_SIZE_REG, val32); + if (val32 == DOWNLOAD_I_AM_HERE) + break; + mdelay(i); + } /* End of for loop */ + + if (val32 != DOWNLOAD_I_AM_HERE) { + pr_err("Bootloader is not ready.\n"); + ret = -ETIMEDOUT; + goto free_buffer; + } + + /* Calculcate number of download blocks */ + num_blocks = (firmware->size - 1) / DOWNLOAD_BLOCK_SIZE + 1; + + /* Updating the length in Download Ctrl Area */ + val32 = firmware->size; /* Explicit cast from size_t to u32 */ + APB_WRITE2(DOWNLOAD_IMAGE_SIZE_REG, val32); + + /* Firmware downloading loop */ + for (block = 0; block < num_blocks; block++) { + size_t tx_size; + size_t block_size; + + /* check the download status */ + APB_READ(DOWNLOAD_STATUS_REG, val32); + if (val32 != DOWNLOAD_PENDING) { + pr_err("Bootloader reported error %d.\n", val32); + ret = -EIO; + goto free_buffer; + } + + /* loop until put - get <= 24K */ + for (i = 0; i < 100; i++) { + APB_READ(DOWNLOAD_GET_REG, get); + if ((put - get) <= + (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) + break; + mdelay(i); + } + + if ((put - get) > (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) { + pr_err("Timeout waiting for FIFO.\n"); + ret = -ETIMEDOUT; + goto free_buffer; + } + + /* calculate the block size */ + tx_size = block_size = min_t(size_t, firmware->size - put, + DOWNLOAD_BLOCK_SIZE); + + memcpy(buf, &firmware->data[put], block_size); + if (block_size < DOWNLOAD_BLOCK_SIZE) { + memset(&buf[block_size], 0, + DOWNLOAD_BLOCK_SIZE - block_size); + tx_size = DOWNLOAD_BLOCK_SIZE; + } + + /* send the block to sram */ + ret = cw1200_apb_write(priv, + CW1200_APB(DOWNLOAD_FIFO_OFFSET + + (put & (DOWNLOAD_FIFO_SIZE - 1))), + buf, tx_size); + if (ret < 0) { + pr_err("Can't write firmware block @ %d!\n", + put & (DOWNLOAD_FIFO_SIZE - 1)); + goto free_buffer; + } + + /* update the put register */ + put += block_size; + APB_WRITE2(DOWNLOAD_PUT_REG, put); + } /* End of firmware download loop */ + + /* Wait for the download completion */ + for (i = 0; i < 300; i += 1 + i / 2) { + APB_READ(DOWNLOAD_STATUS_REG, val32); + if (val32 != DOWNLOAD_PENDING) + break; + mdelay(i); + } + if (val32 != DOWNLOAD_SUCCESS) { + pr_err("Wait for download completion failed: 0x%.8X\n", val32); + ret = -ETIMEDOUT; + goto free_buffer; + } else { + pr_info("Firmware download completed.\n"); + ret = 0; + } + +free_buffer: + kfree(buf); +firmware_release: + release_firmware(firmware); +exit: + return ret; + +#undef APB_WRITE +#undef APB_WRITE2 +#undef APB_READ +#undef REG_WRITE +#undef REG_READ +} + + +static int config_reg_read(struct cw1200_common *priv, u32 *val) +{ + switch (priv->hw_type) { + case HIF_9000_SILICON_VERSATILE: { + u16 val16; + int ret = cw1200_reg_read_16(priv, + ST90TDS_CONFIG_REG_ID, + &val16); + if (ret < 0) + return ret; + *val = val16; + return 0; + } + case HIF_8601_VERSATILE: + case HIF_8601_SILICON: + default: + cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, val); + break; + } + return 0; +} + +static int config_reg_write(struct cw1200_common *priv, u32 val) +{ + switch (priv->hw_type) { + case HIF_9000_SILICON_VERSATILE: + return cw1200_reg_write_16(priv, + ST90TDS_CONFIG_REG_ID, + (u16)val); + case HIF_8601_VERSATILE: + case HIF_8601_SILICON: + default: + return cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID, val); + } + return 0; +} + +int cw1200_load_firmware(struct cw1200_common *priv) +{ + int ret; + int i; + u32 val32; + u16 val16; + int major_revision = -1; + + /* Read CONFIG Register */ + ret = cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32); + if (ret < 0) { + pr_err("Can't read config register.\n"); + goto out; + } + + if (val32 == 0 || val32 == 0xffffffff) { + pr_err("Bad config register value (0x%08x)\n", val32); + ret = -EIO; + goto out; + } + + priv->hw_type = cw1200_get_hw_type(val32, &major_revision); + if (priv->hw_type < 0) { + pr_err("Can't deduce hardware type.\n"); + ret = -ENOTSUPP; + goto out; + } + + /* Set DPLL Reg value, and read back to confirm writes work */ + ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID, + cw1200_dpll_from_clk(priv->hw_refclk)); + if (ret < 0) { + pr_err("Can't write DPLL register.\n"); + goto out; + } + + msleep(20); + + ret = cw1200_reg_read_32(priv, + ST90TDS_TSET_GEN_R_W_REG_ID, &val32); + if (ret < 0) { + pr_err("Can't read DPLL register.\n"); + goto out; + } + + if (val32 != cw1200_dpll_from_clk(priv->hw_refclk)) { + pr_err("Unable to initialise DPLL register. Wrote 0x%.8X, Read 0x%.8X.\n", + cw1200_dpll_from_clk(priv->hw_refclk), val32); + ret = -EIO; + goto out; + } + + /* Set wakeup bit in device */ + ret = cw1200_reg_read_16(priv, ST90TDS_CONTROL_REG_ID, &val16); + if (ret < 0) { + pr_err("set_wakeup: can't read control register.\n"); + goto out; + } + + ret = cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID, + val16 | ST90TDS_CONT_WUP_BIT); + if (ret < 0) { + pr_err("set_wakeup: can't write control register.\n"); + goto out; + } + + /* Wait for wakeup */ + for (i = 0; i < 300; i += (1 + i / 2)) { + ret = cw1200_reg_read_16(priv, + ST90TDS_CONTROL_REG_ID, &val16); + if (ret < 0) { + pr_err("wait_for_wakeup: can't read control register.\n"); + goto out; + } + + if (val16 & ST90TDS_CONT_RDY_BIT) + break; + + msleep(i); + } + + if ((val16 & ST90TDS_CONT_RDY_BIT) == 0) { + pr_err("wait_for_wakeup: device is not responding.\n"); + ret = -ETIMEDOUT; + goto out; + } + + switch (major_revision) { + case 1: + /* CW1200 Hardware detection logic : Check for CUT1.1 */ + ret = cw1200_ahb_read_32(priv, CW1200_CUT_ID_ADDR, &val32); + if (ret) { + pr_err("HW detection: can't read CUT ID.\n"); + goto out; + } + + switch (val32) { + case CW1200_CUT_11_ID_STR: + pr_info("CW1x00 Cut 1.1 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT11; + break; + default: + pr_info("CW1x00 Cut 1.0 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT10; + break; + } + + /* According to ST-E, CUT<2.0 has busted BA TID0-3. + Just disable it entirely... + */ + priv->ba_rx_tid_mask = 0; + priv->ba_tx_tid_mask = 0; + break; + case 2: { + u32 ar1, ar2, ar3; + ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR, &ar1); + if (ret) { + pr_err("(1) HW detection: can't read CUT ID\n"); + goto out; + } + ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 4, &ar2); + if (ret) { + pr_err("(2) HW detection: can't read CUT ID.\n"); + goto out; + } + + ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 8, &ar3); + if (ret) { + pr_err("(3) HW detection: can't read CUT ID.\n"); + goto out; + } + + if (ar1 == CW1200_CUT_22_ID_STR1 && + ar2 == CW1200_CUT_22_ID_STR2 && + ar3 == CW1200_CUT_22_ID_STR3) { + pr_info("CW1x00 Cut 2.2 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT22; + } else { + pr_info("CW1x00 Cut 2.0 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT20; + } + break; + } + case 4: + pr_info("CW1x60 silicon detected.\n"); + priv->hw_revision = CW1X60_HW_REV; + break; + default: + pr_err("Unsupported silicon major revision %d.\n", + major_revision); + ret = -ENOTSUPP; + goto out; + } + + /* Checking for access mode */ + ret = config_reg_read(priv, &val32); + if (ret < 0) { + pr_err("Can't read config register.\n"); + goto out; + } + + if (!(val32 & ST90TDS_CONFIG_ACCESS_MODE_BIT)) { + pr_err("Device is already in QUEUE mode!\n"); + ret = -EINVAL; + goto out; + } + + switch (priv->hw_type) { + case HIF_8601_SILICON: + if (priv->hw_revision == CW1X60_HW_REV) { + pr_err("Can't handle CW1160/1260 firmware load yet.\n"); + ret = -ENOTSUPP; + goto out; + } + ret = cw1200_load_firmware_cw1200(priv); + break; + default: + pr_err("Can't perform firmware load for hw type %d.\n", + priv->hw_type); + ret = -ENOTSUPP; + goto out; + } + if (ret < 0) { + pr_err("Firmware load error.\n"); + goto out; + } + + /* Enable interrupt signalling */ + priv->hwbus_ops->lock(priv->hwbus_priv); + ret = __cw1200_irq_enable(priv, 1); + priv->hwbus_ops->unlock(priv->hwbus_priv); + if (ret < 0) + goto unsubscribe; + + /* Configure device for MESSSAGE MODE */ + ret = config_reg_read(priv, &val32); + if (ret < 0) { + pr_err("Can't read config register.\n"); + goto unsubscribe; + } + ret = config_reg_write(priv, val32 & ~ST90TDS_CONFIG_ACCESS_MODE_BIT); + if (ret < 0) { + pr_err("Can't write config register.\n"); + goto unsubscribe; + } + + /* Unless we read the CONFIG Register we are + * not able to get an interrupt + */ + mdelay(10); + config_reg_read(priv, &val32); + +out: + return ret; + +unsubscribe: + /* Disable interrupt signalling */ + priv->hwbus_ops->lock(priv->hwbus_priv); + ret = __cw1200_irq_enable(priv, 0); + priv->hwbus_ops->unlock(priv->hwbus_priv); + return ret; +} |