diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x/rtl8180_dev.c')
| -rw-r--r-- | drivers/net/wireless/rtl818x/rtl8180_dev.c | 1081 |
1 files changed, 1081 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c new file mode 100644 index 000000000000..6c226c024dd9 --- /dev/null +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -0,0 +1,1081 @@ + +/* + * Linux device driver for RTL8180 / RTL8185 + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> + * + * Based on the r8180 driver, which is: + * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al. + * + * Thanks to Realtek for their support! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/eeprom_93cx6.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8180_rtl8225.h" +#include "rtl8180_sa2400.h" +#include "rtl8180_max2820.h" +#include "rtl8180_grf5101.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); +MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver"); +MODULE_LICENSE("GPL"); + +static struct pci_device_id rtl8180_table[] __devinitdata = { + /* rtl8185 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) }, + { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) }, + { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) }, + + /* rtl8180 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) }, + { PCI_DEVICE(0x1799, 0x6001) }, + { PCI_DEVICE(0x1799, 0x6020) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, rtl8180_table); + +static const struct ieee80211_rate rtl818x_rates[] = { + { .bitrate = 10, .hw_value = 0, }, + { .bitrate = 20, .hw_value = 1, }, + { .bitrate = 55, .hw_value = 2, }, + { .bitrate = 110, .hw_value = 3, }, + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static const struct ieee80211_channel rtl818x_channels[] = { + { .center_freq = 2412 }, + { .center_freq = 2417 }, + { .center_freq = 2422 }, + { .center_freq = 2427 }, + { .center_freq = 2432 }, + { .center_freq = 2437 }, + { .center_freq = 2442 }, + { .center_freq = 2447 }, + { .center_freq = 2452 }, + { .center_freq = 2457 }, + { .center_freq = 2462 }, + { .center_freq = 2467 }, + { .center_freq = 2472 }, + { .center_freq = 2484 }, +}; + + + + +void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + int i = 10; + u32 buf; + + buf = (data << 8) | addr; + + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80); + while (i--) { + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf); + if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF)) + return; + } +} + +static void rtl8180_handle_rx(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + unsigned int count = 32; + + while (count--) { + struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx]; + struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; + u32 flags = le32_to_cpu(entry->flags); + + if (flags & RTL818X_RX_DESC_FLAG_OWN) + return; + + if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL | + RTL818X_RX_DESC_FLAG_FOF | + RTL818X_RX_DESC_FLAG_RX_ERR))) + goto done; + else { + u32 flags2 = le32_to_cpu(entry->flags2); + struct ieee80211_rx_status rx_status = {0}; + struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE); + + if (unlikely(!new_skb)) + goto done; + + pci_unmap_single(priv->pdev, + *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + skb_put(skb, flags & 0xFFF); + + rx_status.antenna = (flags2 >> 15) & 1; + /* TODO: improve signal/rssi reporting */ + rx_status.qual = flags2 & 0xFF; + rx_status.signal = (flags2 >> 8) & 0x7F; + /* XXX: is this correct? */ + rx_status.rate_idx = (flags >> 20) & 0xF; + rx_status.freq = dev->conf.channel->center_freq; + rx_status.band = dev->conf.channel->band; + rx_status.mactime = le64_to_cpu(entry->tsft); + rx_status.flag |= RX_FLAG_TSFT; + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) + rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; + + ieee80211_rx_irqsafe(dev, skb, &rx_status); + + skb = new_skb; + priv->rx_buf[priv->rx_idx] = skb; + *((dma_addr_t *) skb->cb) = + pci_map_single(priv->pdev, skb_tail_pointer(skb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + } + + done: + entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + if (priv->rx_idx == 31) + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); + priv->rx_idx = (priv->rx_idx + 1) % 32; + } +} + +static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb; + struct ieee80211_tx_info *info; + u32 flags = le32_to_cpu(entry->flags); + + if (flags & RTL818X_TX_DESC_FLAG_OWN) + return; + + ring->idx = (ring->idx + 1) % ring->entries; + skb = __skb_dequeue(&ring->queue); + pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), + skb->len, PCI_DMA_TODEVICE); + + info = IEEE80211_SKB_CB(skb); + ieee80211_tx_info_clear_status(info); + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + (flags & RTL818X_TX_DESC_FLAG_TX_OK)) + info->flags |= IEEE80211_TX_STAT_ACK; + + info->status.rates[0].count = (flags & 0xFF) + 1; + + ieee80211_tx_status_irqsafe(dev, skb); + if (ring->entries - skb_queue_len(&ring->queue) == 2) + ieee80211_wake_queue(dev, prio); + } +} + +static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u16 reg; + + spin_lock(&priv->lock); + reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS); + if (unlikely(reg == 0xFFFF)) { + spin_unlock(&priv->lock); + return IRQ_HANDLED; + } + + rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg); + + if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR)) + rtl8180_handle_tx(dev, 3); + + if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR)) + rtl8180_handle_tx(dev, 2); + + if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR)) + rtl8180_handle_tx(dev, 1); + + if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR)) + rtl8180_handle_tx(dev, 0); + + if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR)) + rtl8180_handle_rx(dev); + + spin_unlock(&priv->lock); + + return IRQ_HANDLED; +} + +static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring; + struct rtl8180_tx_desc *entry; + unsigned long flags; + unsigned int idx, prio; + dma_addr_t mapping; + u32 tx_flags; + u8 rc_flags; + u16 plcp_len = 0; + __le16 rts_duration = 0; + + prio = skb_get_queue_mapping(skb); + ring = &priv->tx_ring[prio]; + + mapping = pci_map_single(priv->pdev, skb->data, + skb->len, PCI_DMA_TODEVICE); + + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | + RTL818X_TX_DESC_FLAG_LS | + (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | + skb->len; + + if (priv->r8185) + tx_flags |= RTL818X_TX_DESC_FLAG_DMA | + RTL818X_TX_DESC_FLAG_NO_ENC; + + rc_flags = info->control.rates[0].flags; + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + tx_flags |= RTL818X_TX_DESC_FLAG_RTS; + tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + tx_flags |= RTL818X_TX_DESC_FLAG_CTS; + tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + } + + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) + rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len, + info); + + if (!priv->r8185) { + unsigned int remainder; + + plcp_len = DIV_ROUND_UP(16 * (skb->len + 4), + (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); + remainder = (16 * (skb->len + 4)) % + ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); + if (remainder > 0 && remainder <= 6) + plcp_len |= 1 << 15; + } + + spin_lock_irqsave(&priv->lock, flags); + idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; + entry = &ring->desc[idx]; + + entry->rts_duration = rts_duration; + entry->plcp_len = cpu_to_le16(plcp_len); + entry->tx_buf = cpu_to_le32(mapping); + entry->frame_len = cpu_to_le32(skb->len); + entry->flags2 = info->control.rates[1].idx >= 0 ? + ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; + entry->retry_limit = info->control.rates[0].count; + entry->flags = cpu_to_le32(tx_flags); + __skb_queue_tail(&ring->queue, skb); + if (ring->entries - skb_queue_len(&ring->queue) < 2) + ieee80211_stop_queue(dev, skb_get_queue_mapping(skb)); + spin_unlock_irqrestore(&priv->lock, flags); + + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4))); + + return 0; +} + +void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); +} + +static int rtl8180_init_hw(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg; + + rtl818x_iowrite8(priv, &priv->map->CMD, 0); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(10); + + /* reset */ + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + rtl818x_ioread8(priv, &priv->map->CMD); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= (1 << 1); + reg |= RTL818X_CMD_RESET; + rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + /* check success of reset */ + if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) { + printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy)); + return -ETIMEDOUT; + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) { + /* For cardbus */ + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + reg |= 1 << 1; + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); + reg = rtl818x_ioread16(priv, &priv->map->FEMR); + reg |= (1 << 15) | (1 << 14) | (1 << 4); + rtl818x_iowrite16(priv, &priv->map->FEMR, reg); + } + + rtl818x_iowrite8(priv, &priv->map->MSR, 0); + + if (!priv->r8185) + rtl8180_set_anaparam(priv, priv->anaparam); + + rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); + rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); + rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); + rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); + + /* TODO: necessary? specs indicate not */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3)); + if (priv->r8185) { + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4)); + } + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */ + + /* TODO: turn off hw wep on rtl8180 */ + + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (priv->r8185) { + rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); + rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81); + rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); + + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + + /* TODO: set ClkRun enable? necessary? */ + reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + } else { + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1); + rtl818x_iowrite8(priv, &priv->map->SECURITY, 0); + + rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6); + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C); + } + + priv->rf->init(dev); + if (priv->r8185) + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + return 0; +} + +static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_rx_desc *entry; + int i; + + priv->rx_ring = pci_alloc_consistent(priv->pdev, + sizeof(*priv->rx_ring) * 32, + &priv->rx_ring_dma); + + if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { + printk(KERN_ERR "%s: Cannot allocate RX ring\n", + wiphy_name(dev->wiphy)); + return -ENOMEM; + } + + memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32); + priv->rx_idx = 0; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE); + dma_addr_t *mapping; + entry = &priv->rx_ring[i]; + if (!skb) + return 0; + + priv->rx_buf[i] = skb; + mapping = (dma_addr_t *)skb->cb; + *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + entry->rx_buf = cpu_to_le32(*mapping); + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + } + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); + return 0; +} + +static void rtl8180_free_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = priv->rx_buf[i]; + if (!skb) + continue; + + pci_unmap_single(priv->pdev, + *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + kfree_skb(skb); + } + + pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32, + priv->rx_ring, priv->rx_ring_dma); + priv->rx_ring = NULL; +} + +static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, + unsigned int prio, unsigned int entries) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_desc *ring; + dma_addr_t dma; + int i; + + ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma); + if (!ring || (unsigned long)ring & 0xFF) { + printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n", + wiphy_name(dev->wiphy), prio); + return -ENOMEM; + } + + memset(ring, 0, sizeof(*ring)*entries); + priv->tx_ring[prio].desc = ring; + priv->tx_ring[prio].dma = dma; + priv->tx_ring[prio].idx = 0; + priv->tx_ring[prio].entries = entries; + skb_queue_head_init(&priv->tx_ring[prio].queue); + + for (i = 0; i < entries; i++) + ring[i].next_tx_desc = + cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring)); + + return 0; +} + +static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb = __skb_dequeue(&ring->queue); + + pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), + skb->len, PCI_DMA_TODEVICE); + kfree_skb(skb); + ring->idx = (ring->idx + 1) % ring->entries; + } + + pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries, + ring->desc, ring->dma); + ring->desc = NULL; +} + +static int rtl8180_start(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int ret, i; + u32 reg; + + ret = rtl8180_init_rx_ring(dev); + if (ret) + return ret; + + for (i = 0; i < 4; i++) + if ((ret = rtl8180_init_tx_ring(dev, i, 16))) + goto err_free_rings; + + ret = rtl8180_init_hw(dev); + if (ret) + goto err_free_rings; + + rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); + rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); + rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); + rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); + + ret = request_irq(priv->pdev->irq, &rtl8180_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (ret) { + printk(KERN_ERR "%s: failed to register IRQ handler\n", + wiphy_name(dev->wiphy)); + goto err_free_rings; + } + + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + + rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); + rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); + + reg = RTL818X_RX_CONF_ONLYERLPKT | + RTL818X_RX_CONF_RX_AUTORESETPHY | + RTL818X_RX_CONF_MGMT | + RTL818X_RX_CONF_DATA | + (7 << 8 /* MAX RX DMA */) | + RTL818X_RX_CONF_BROADCAST | + RTL818X_RX_CONF_NICMAC; + + if (priv->r8185) + reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2; + else { + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1) + ? RTL818X_RX_CONF_CSDM1 : 0; + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2) + ? RTL818X_RX_CONF_CSDM2 : 0; + } + + priv->rx_conf = reg; + rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); + + if (priv->r8185) { + reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); + reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT; + reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; + rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; + reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT; + rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); + + /* disable early TX */ + rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f); + } + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg |= (6 << 21 /* MAX TX DMA */) | + RTL818X_TX_CONF_NO_ICV; + + if (priv->r8185) + reg &= ~RTL818X_TX_CONF_PROBE_DTS; + else + reg &= ~RTL818X_TX_CONF_HW_SEQNUM; + + /* different meaning, same value on both rtl8185 and rtl8180 */ + reg &= ~RTL818X_TX_CONF_SAT_HWPLCP; + + rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg |= RTL818X_CMD_RX_ENABLE; + reg |= RTL818X_CMD_TX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + priv->mode = NL80211_IFTYPE_MONITOR; + return 0; + + err_free_rings: + rtl8180_free_rx_ring(dev); + for (i = 0; i < 4; i++) + if (priv->tx_ring[i].desc) + rtl8180_free_tx_ring(dev, i); + + return ret; +} + +static void rtl8180_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + int i; + + priv->mode = NL80211_IFTYPE_UNSPECIFIED; + + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= ~RTL818X_CMD_TX_ENABLE; + reg &= ~RTL818X_CMD_RX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + priv->rf->stop(dev); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); + rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + free_irq(priv->pdev->irq, dev); + + rtl8180_free_rx_ring(dev); + for (i = 0; i < 4; i++) + rtl8180_free_tx_ring(dev, i); +} + +static int rtl8180_add_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->mode != NL80211_IFTYPE_MONITOR) + return -EOPNOTSUPP; + + switch (conf->type) { + case NL80211_IFTYPE_STATION: + priv->mode = conf->type; + break; + default: + return -EOPNOTSUPP; + } + + priv->vif = conf->vif; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0], + le32_to_cpu(*(__le32 *)conf->mac_addr)); + rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4], + le16_to_cpu(*(__le16 *)(conf->mac_addr + 4))); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + return 0; +} + +static void rtl8180_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + priv->mode = NL80211_IFTYPE_MONITOR; + priv->vif = NULL; +} + +static int rtl8180_config(struct ieee80211_hw *dev, u32 changed) +{ + struct rtl8180_priv *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; + + priv->rf->set_chan(dev, conf); + + return 0; +} + +static int rtl8180_config_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + for (i = 0; i < ETH_ALEN; i++) + rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]); + + if (is_valid_ether_addr(conf->bssid)) + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA); + else + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK); + + return 0; +} + +static void rtl8180_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mclist) +{ + struct rtl8180_priv *priv = dev->priv; + + if (changed_flags & FIF_FCSFAIL) + priv->rx_conf ^= RTL818X_RX_CONF_FCS; + if (changed_flags & FIF_CONTROL) + priv->rx_conf ^= RTL818X_RX_CONF_CTRL; + if (changed_flags & FIF_OTHER_BSS) + priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; + if (*total_flags & FIF_ALLMULTI || mc_count > 0) + priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; + else + priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; + + *total_flags = 0; + + if (priv->rx_conf & RTL818X_RX_CONF_FCS) + *total_flags |= FIF_FCSFAIL; + if (priv->rx_conf & RTL818X_RX_CONF_CTRL) + *total_flags |= FIF_CONTROL; + if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) + *total_flags |= FIF_OTHER_BSS; + if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) + *total_flags |= FIF_ALLMULTI; + + rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf); +} + +static const struct ieee80211_ops rtl8180_ops = { + .tx = rtl8180_tx, + .start = rtl8180_start, + .stop = rtl8180_stop, + .add_interface = rtl8180_add_interface, + .remove_interface = rtl8180_remove_interface, + .config = rtl8180_config, + .config_interface = rtl8180_config_interface, + .configure_filter = rtl8180_configure_filter, +}; + +static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom) +{ + struct ieee80211_hw *dev = eeprom->data; + struct rtl8180_priv *priv = dev->priv; + u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + + eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; + eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; + eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; + eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; +} + +static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom) +{ + struct ieee80211_hw *dev = eeprom->data; + struct rtl8180_priv *priv = dev->priv; + u8 reg = 2 << 6; + + if (eeprom->reg_data_in) + reg |= RTL818X_EEPROM_CMD_WRITE; + if (eeprom->reg_data_out) + reg |= RTL818X_EEPROM_CMD_READ; + if (eeprom->reg_data_clock) + reg |= RTL818X_EEPROM_CMD_CK; + if (eeprom->reg_chip_select) + reg |= RTL818X_EEPROM_CMD_CS; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); +} + +static int __devinit rtl8180_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct ieee80211_hw *dev; + struct rtl8180_priv *priv; + unsigned long mem_addr, mem_len; + unsigned int io_addr, io_len; + int err, i; + struct eeprom_93cx6 eeprom; + const char *chip_name, *rf_name = NULL; + u32 reg; + u16 eeprom_val; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n", + pci_name(pdev)); + return err; + } + + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n", + pci_name(pdev)); + return err; + } + + io_addr = pci_resource_start(pdev, 0); + io_len = pci_resource_len(pdev, 0); + mem_addr = pci_resource_start(pdev, 1); + mem_len = pci_resource_len(pdev, 1); + + if (mem_len < sizeof(struct rtl818x_csr) || + io_len < sizeof(struct rtl818x_csr)) { + printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) || + (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) { + printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n", + pci_name(pdev)); + goto err_free_reg; + } + + pci_set_master(pdev); + + dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops); + if (!dev) { + printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + priv = dev->priv; + priv->pdev = pdev; + + dev->max_rates = 2; + SET_IEEE80211_DEV(dev, &pdev->dev); + pci_set_drvdata(pdev, dev); + + priv->map = pci_iomap(pdev, 1, mem_len); + if (!priv->map) + priv->map = pci_iomap(pdev, 0, io_len); + + if (!priv->map) { + printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n", + pci_name(pdev)); + goto err_free_dev; + } + + BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels)); + BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates)); + + memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); + memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); + + priv->band.band = IEEE80211_BAND_2GHZ; + priv->band.channels = priv->channels; + priv->band.n_channels = ARRAY_SIZE(rtl818x_channels); + priv->band.bitrates = priv->rates; + priv->band.n_bitrates = 4; + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; + + dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_SIGNAL_UNSPEC; + dev->queues = 1; + dev->max_signal = 65; + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg &= RTL818X_TX_CONF_HWVER_MASK; + switch (reg) { + case RTL818X_TX_CONF_R8180_ABCD: + chip_name = "RTL8180"; + break; + case RTL818X_TX_CONF_R8180_F: + chip_name = "RTL8180vF"; + break; + case RTL818X_TX_CONF_R8185_ABC: + chip_name = "RTL8185"; + break; + case RTL818X_TX_CONF_R8185_D: + chip_name = "RTL8185vD"; + break; + default: + printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n", + pci_name(pdev), reg >> 25); + goto err_iounmap; + } + + priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC; + if (priv->r8185) { + priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); + pci_try_set_mwi(pdev); + } + + eeprom.data = dev; + eeprom.register_read = rtl8180_eeprom_register_read; + eeprom.register_write = rtl8180_eeprom_register_write; + if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) + eeprom.width = PCI_EEPROM_WIDTH_93C66; + else + eeprom.width = PCI_EEPROM_WIDTH_93C46; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val); + eeprom_val &= 0xFF; + switch (eeprom_val) { + case 1: rf_name = "Intersil"; + break; + case 2: rf_name = "RFMD"; + break; + case 3: priv->rf = &sa2400_rf_ops; + break; + case 4: priv->rf = &max2820_rf_ops; + break; + case 5: priv->rf = &grf5101_rf_ops; + break; + case 9: priv->rf = rtl8180_detect_rf(dev); + break; + case 10: + rf_name = "RTL8255"; + break; + default: + printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n", + pci_name(pdev), eeprom_val); + goto err_iounmap; + } + + if (!priv->rf) { + printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n", + pci_name(pdev), rf_name); + goto err_iounmap; + } + + eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val); + priv->csthreshold = eeprom_val >> 8; + if (!priv->r8185) { + __le32 anaparam; + eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2); + priv->anaparam = le32_to_cpu(anaparam); + eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); + } + + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3); + if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" + " randomly generated MAC addr\n", pci_name(pdev)); + random_ether_addr(dev->wiphy->perm_addr); + } + + /* CCK TX power */ + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr); + priv->channels[i].hw_value = txpwr & 0xFF; + priv->channels[i + 1].hw_value = txpwr >> 8; + } + + /* OFDM TX power */ + if (priv->r8185) { + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr); + priv->channels[i].hw_value |= (txpwr & 0xFF) << 8; + priv->channels[i + 1].hw_value |= txpwr & 0xFF00; + } + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + spin_lock_init(&priv->lock); + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot register device\n", + pci_name(pdev)); + goto err_iounmap; + } + + printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n", + wiphy_name(dev->wiphy), dev->wiphy->perm_addr, + chip_name, priv->rf->name); + + return 0; + + err_iounmap: + iounmap(priv->map); + + err_free_dev: + pci_set_drvdata(pdev, NULL); + ieee80211_free_hw(dev); + + err_free_reg: + pci_release_regions(pdev); + pci_disable_device(pdev); + return err; +} + +static void __devexit rtl8180_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct rtl8180_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + + priv = dev->priv; + + pci_iounmap(pdev, priv->map); + pci_release_regions(pdev); + pci_disable_device(pdev); + ieee80211_free_hw(dev); +} + +#ifdef CONFIG_PM +static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state) +{ + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int rtl8180_resume(struct pci_dev *pdev) +{ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + return 0; +} + +#endif /* CONFIG_PM */ + +static struct pci_driver rtl8180_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl8180_table, + .probe = rtl8180_probe, + .remove = __devexit_p(rtl8180_remove), +#ifdef CONFIG_PM + .suspend = rtl8180_suspend, + .resume = rtl8180_resume, +#endif /* CONFIG_PM */ +}; + +static int __init rtl8180_init(void) +{ + return pci_register_driver(&rtl8180_driver); +} + +static void __exit rtl8180_exit(void) +{ + pci_unregister_driver(&rtl8180_driver); +} + +module_init(rtl8180_init); +module_exit(rtl8180_exit); |