diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
25 files changed, 1816 insertions, 1030 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 5063e01410e5..4f420a9ec5dc 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -321,7 +321,8 @@ static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev, } static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) + struct rt2x00lib_erp *erp, + u32 changed) { int preamble_mask; u32 reg; @@ -329,59 +330,72 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev, /* * When short preamble is enabled, we should set bit 0x08 */ - preamble_mask = erp->short_preamble << 3; - - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x1ff); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0x13a); - rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); - rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 10)); - rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); - rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); - rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 20)); - rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); - rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); - rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 55)); - rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); - rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); - rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 110)); - rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); - - rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates); + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + preamble_mask = erp->short_preamble << 3; + + rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); + rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x1ff); + rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0x13a); + rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); + rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); + rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 10)); + rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); + rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); + rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 20)); + rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); + rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); + rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 55)); + rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); + rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); + rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 110)); + rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); + } - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); + if (changed & BSS_CHANGED_BASIC_RATES) + rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates); - rt2x00pci_register_read(rt2x00dev, CSR12, ®); - rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, erp->beacon_int * 16); - rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, erp->beacon_int * 16); - rt2x00pci_register_write(rt2x00dev, CSR12, reg); + if (changed & BSS_CHANGED_ERP_SLOT) { + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); - rt2x00pci_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); - rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); - rt2x00pci_register_write(rt2x00dev, CSR18, reg); + rt2x00pci_register_read(rt2x00dev, CSR18, ®); + rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); + rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); + rt2x00pci_register_write(rt2x00dev, CSR18, reg); + + rt2x00pci_register_read(rt2x00dev, CSR19, ®); + rt2x00_set_field32(®, CSR19_DIFS, erp->difs); + rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); + rt2x00pci_register_write(rt2x00dev, CSR19, reg); + } - rt2x00pci_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, erp->difs); - rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); - rt2x00pci_register_write(rt2x00dev, CSR19, reg); + if (changed & BSS_CHANGED_BEACON_INT) { + rt2x00pci_register_read(rt2x00dev, CSR12, ®); + rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, + erp->beacon_int * 16); + rt2x00pci_register_write(rt2x00dev, CSR12, reg); + } } static void rt2400pci_config_ant(struct rt2x00_dev *rt2x00dev, @@ -1007,12 +1021,11 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt2400pci_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *txd = entry_priv->desc; u32 word; @@ -1091,12 +1104,12 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(rt2x00dev, entry->skb); + rt2x00queue_map_txskb(entry); /* * Write the TX descriptor for the beacon. */ - rt2400pci_write_tx_desc(rt2x00dev, entry->skb, txdesc); + rt2400pci_write_tx_desc(entry, txdesc); /* * Dump beacon to userspace through debugfs. @@ -1112,24 +1125,24 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, rt2x00pci_register_write(rt2x00dev, CSR14, reg); } -static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue) +static void rt2400pci_kick_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE)); - rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK)); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue == QID_ATIM)); + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue->qid == QID_AC_BE)); + rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue->qid == QID_AC_BK)); + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue->qid == QID_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } -static void rt2400pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid) +static void rt2400pci_kill_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; - if (qid == QID_BEACON) { + if (queue->qid == QID_BEACON) { rt2x00pci_register_write(rt2x00dev, CSR14, 0); } else { rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); @@ -1481,15 +1494,17 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Create channel information array */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; spec->channels_info = info; tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + for (i = 0; i < 14; i++) { + info[i].max_power = TXPOWER_FROM_DEV(MAX_TXPOWER); + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index c2a555d5376b..97feb7aef809 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -327,7 +327,8 @@ static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev, } static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) + struct rt2x00lib_erp *erp, + u32 changed) { int preamble_mask; u32 reg; @@ -335,59 +336,73 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev, /* * When short preamble is enabled, we should set bit 0x08 */ - preamble_mask = erp->short_preamble << 3; - - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x162); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0xa2); - rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); - rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 10)); - rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); - rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); - rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 20)); - rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); - rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); - rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 55)); - rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); - rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); - rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 110)); - rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); - - rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates); + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + preamble_mask = erp->short_preamble << 3; + + rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); + rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x162); + rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0xa2); + rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); + rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); + rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 10)); + rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); + rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); + rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 20)); + rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); + rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); + rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 55)); + rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); + rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); + rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); + rt2x00_set_field32(®, ARCSR2_LENGTH, + GET_DURATION(ACK_SIZE, 110)); + rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); + } - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); + if (changed & BSS_CHANGED_BASIC_RATES) + rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates); - rt2x00pci_register_read(rt2x00dev, CSR12, ®); - rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, erp->beacon_int * 16); - rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, erp->beacon_int * 16); - rt2x00pci_register_write(rt2x00dev, CSR12, reg); + if (changed & BSS_CHANGED_ERP_SLOT) { + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); - rt2x00pci_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); - rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); - rt2x00pci_register_write(rt2x00dev, CSR18, reg); + rt2x00pci_register_read(rt2x00dev, CSR18, ®); + rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); + rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); + rt2x00pci_register_write(rt2x00dev, CSR18, reg); + + rt2x00pci_register_read(rt2x00dev, CSR19, ®); + rt2x00_set_field32(®, CSR19_DIFS, erp->difs); + rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); + rt2x00pci_register_write(rt2x00dev, CSR19, reg); + } + + if (changed & BSS_CHANGED_BEACON_INT) { + rt2x00pci_register_read(rt2x00dev, CSR12, ®); + rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, + erp->beacon_int * 16); + rt2x00pci_register_write(rt2x00dev, CSR12, reg); + } - rt2x00pci_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, erp->difs); - rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); - rt2x00pci_register_write(rt2x00dev, CSR19, reg); } static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev, @@ -1161,12 +1176,11 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt2500pci_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *txd = entry_priv->desc; u32 word; @@ -1244,12 +1258,12 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(rt2x00dev, entry->skb); + rt2x00queue_map_txskb(entry); /* * Write the TX descriptor for the beacon. */ - rt2500pci_write_tx_desc(rt2x00dev, entry->skb, txdesc); + rt2500pci_write_tx_desc(entry, txdesc); /* * Dump beacon to userspace through debugfs. @@ -1265,24 +1279,24 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, rt2x00pci_register_write(rt2x00dev, CSR14, reg); } -static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue) +static void rt2500pci_kick_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE)); - rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK)); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue == QID_ATIM)); + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue->qid == QID_AC_BE)); + rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue->qid == QID_AC_BK)); + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue->qid == QID_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } -static void rt2500pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid) +static void rt2500pci_kill_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; - if (qid == QID_BEACON) { + if (queue->qid == QID_BEACON) { rt2x00pci_register_write(rt2x00dev, CSR14, 0); } else { rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); @@ -1795,19 +1809,23 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Create channel information array */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; spec->channels_info = info; tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + for (i = 0; i < 14; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } if (spec->num_channels > 14) { - for (i = 14; i < spec->num_channels; i++) - info[i].tx_power1 = DEFAULT_TXPOWER; + for (i = 14; i < spec->num_channels; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = DEFAULT_TXPOWER; + } } return 0; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index cdaf93f48263..93e44c7f3a74 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -355,7 +355,9 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, * it is known that not work at least on some hardware. * SW crypto will be used in that case. */ - if (key->alg == ALG_WEP && key->keyidx != 0) + if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || + key->cipher == WLAN_CIPHER_SUITE_WEP104) && + key->keyidx != 0) return -EOPNOTSUPP; /* @@ -492,24 +494,34 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev, } static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) + struct rt2x00lib_erp *erp, + u32 changed) { u16 reg; - rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); - rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, - !!erp->short_preamble); - rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); + rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, + !!erp->short_preamble); + rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); + } - rt2500usb_register_write(rt2x00dev, TXRX_CSR11, erp->basic_rates); + if (changed & BSS_CHANGED_BASIC_RATES) + rt2500usb_register_write(rt2x00dev, TXRX_CSR11, + erp->basic_rates); - rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); - rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, erp->beacon_int * 4); - rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); + if (changed & BSS_CHANGED_BEACON_INT) { + rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); + rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, + erp->beacon_int * 4); + rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); + } - rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time); - rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs); + if (changed & BSS_CHANGED_ERP_SLOT) { + rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time); + rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs); + rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs); + } } static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev, @@ -1039,12 +1051,11 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt2500usb_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - __le32 *txd = (__le32 *) skb->data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + __le32 *txd = (__le32 *) entry->skb->data; u32 word; /* @@ -1127,7 +1138,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry, /* * Write the TX descriptor for the beacon. */ - rt2500usb_write_tx_desc(rt2x00dev, entry->skb, txdesc); + rt2500usb_write_tx_desc(entry, txdesc); /* * Dump beacon to userspace through debugfs. @@ -1195,6 +1206,14 @@ static int rt2500usb_get_tx_data_len(struct queue_entry *entry) return length; } +static void rt2500usb_kill_tx_queue(struct data_queue *queue) +{ + if (queue->qid == QID_BEACON) + rt2500usb_register_write(queue->rt2x00dev, TXRX_CSR19, 0); + + rt2x00usb_kill_tx_queue(queue); +} + /* * RX control handlers */ @@ -1655,10 +1674,15 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize all hw fields. + * + * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING unless we are + * capable of sending the buffered frames out after the DTIM + * transmission using rt2x00lib_beacondone. This will send out + * multicast and broadcast traffic immediately instead of buffering it + * infinitly and thus dropping it after some time. */ rt2x00dev->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; @@ -1698,19 +1722,23 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Create channel information array */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; spec->channels_info = info; tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + for (i = 0; i < 14; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } if (spec->num_channels > 14) { - for (i = 14; i < spec->num_channels; i++) - info[i].tx_power1 = DEFAULT_TXPOWER; + for (i = 14; i < spec->num_channels; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = DEFAULT_TXPOWER; + } } return 0; @@ -1789,7 +1817,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .write_beacon = rt2500usb_write_beacon, .get_tx_data_len = rt2500usb_get_tx_data_len, .kick_tx_queue = rt2x00usb_kick_tx_queue, - .kill_tx_queue = rt2x00usb_kill_tx_queue, + .kill_tx_queue = rt2500usb_kill_tx_queue, .fill_rxdone = rt2500usb_fill_rxdone, .config_shared_key = rt2500usb_config_key, .config_pairwise_key = rt2500usb_config_key, diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index ed4ebcdde7c9..eb8b6cab9925 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> @@ -639,6 +640,18 @@ #define LED_CFG_LED_POLAR FIELD32(0x40000000) /* + * AMPDU_BA_WINSIZE: Force BlockAck window size + * FORCE_WINSIZE_ENABLE: + * 0: Disable forcing of BlockAck window size + * 1: Enable forcing of BlockAck window size, overwrites values BlockAck + * window size values in the TXWI + * FORCE_WINSIZE: BlockAck window size + */ +#define AMPDU_BA_WINSIZE 0x1040 +#define AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE FIELD32(0x00000020) +#define AMPDU_BA_WINSIZE_FORCE_WINSIZE FIELD32(0x0000001f) + +/* * XIFS_TIME_CFG: MAC timing * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX @@ -698,8 +711,14 @@ /* * TBTT_SYNC_CFG: + * BCN_AIFSN: Beacon AIFSN after TBTT interrupt in slots + * BCN_CWMIN: Beacon CWMin after TBTT interrupt in slots */ #define TBTT_SYNC_CFG 0x1118 +#define TBTT_SYNC_CFG_TBTT_ADJUST FIELD32(0x000000ff) +#define TBTT_SYNC_CFG_BCN_EXP_WIN FIELD32(0x0000ff00) +#define TBTT_SYNC_CFG_BCN_AIFSN FIELD32(0x000f0000) +#define TBTT_SYNC_CFG_BCN_CWMIN FIELD32(0x00f00000) /* * TSF_TIMER_DW0: Local lsb TSF timer, read-only @@ -735,16 +754,21 @@ #define INT_TIMER_EN_GP_TIMER FIELD32(0x00000002) /* - * CH_IDLE_STA: channel idle time + * CH_IDLE_STA: channel idle time (in us) */ #define CH_IDLE_STA 0x1130 /* - * CH_BUSY_STA: channel busy time + * CH_BUSY_STA: channel busy time on primary channel (in us) */ #define CH_BUSY_STA 0x1134 /* + * CH_BUSY_STA_SEC: channel busy time on secondary channel in HT40 mode (in us) + */ +#define CH_BUSY_STA_SEC 0x1138 + +/* * MAC_STATUS_CFG: * BBP_RF_BUSY: When set to 0, BBP and RF are stable. * if 1 or higher one of the 2 registers is busy. @@ -1318,11 +1342,34 @@ #define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) /* - * TX_STA_FIFO: TX Result for specific PID status fifo register + * TX_STA_FIFO: TX Result for specific PID status fifo register. + * + * This register is implemented as FIFO with 16 entries in the HW. Each + * register read fetches the next tx result. If the FIFO is full because + * it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS) + * triggered, the hw seems to simply drop further tx results. + * + * VALID: 1: this tx result is valid + * 0: no valid tx result -> driver should stop reading + * PID_TYPE: The PID latched from the PID field in the TXWI, can be used + * to match a frame with its tx result (even though the PID is + * only 4 bits wide). + * PID_QUEUE: Part of PID_TYPE, this is the queue index number (0-3) + * PID_ENTRY: Part of PID_TYPE, this is the queue entry index number (1-3) + * This identification number is calculated by ((idx % 3) + 1). + * TX_SUCCESS: Indicates tx success (1) or failure (0) + * TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0) + * TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0) + * WCID: The wireless client ID. + * MCS: The tx rate used during the last transmission of this frame, be it + * successful or not. + * PHYMODE: The phymode used for the transmission. */ #define TX_STA_FIFO 0x1718 #define TX_STA_FIFO_VALID FIELD32(0x00000001) #define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) +#define TX_STA_FIFO_PID_QUEUE FIELD32(0x00000006) +#define TX_STA_FIFO_PID_ENTRY FIELD32(0x00000018) #define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) #define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) #define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) @@ -1405,6 +1452,24 @@ /* * Security key table memory. + * + * The pairwise key table shares some memory with the beacon frame + * buffers 6 and 7. That basically means that when beacon 6 & 7 + * are used we should only use the reduced pairwise key table which + * has a maximum of 222 entries. + * + * --------------------------------------------- + * |0x4000 | Pairwise Key | Reduced Pairwise | + * | | Table | Key Table | + * | | Size: 256 * 32 | Size: 222 * 32 | + * |0x5BC0 | |------------------- + * | | | Beacon 6 | + * |0x5DC0 | |------------------- + * | | | Beacon 7 | + * |0x5FC0 | |------------------- + * |0x5FFF | | + * -------------------------- + * * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry @@ -1554,7 +1619,8 @@ struct mac_iveiv_entry { * 2. Extract memory from FCE table for BCN 4~5 * 3. Extract memory from Pair-wise key table for BCN 6~7 * It occupied those memory of wcid 238~253 for BCN 6 - * and wcid 222~237 for BCN 7 + * and wcid 222~237 for BCN 7 (see Security key table memory + * for more info). * * IMPORTANT NOTE: Not sure why legacy driver does this, * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. @@ -1841,6 +1907,13 @@ struct mac_iveiv_entry { #define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) /* + * EEPROM Maximum TX power values + */ +#define EEPROM_MAX_TX_POWER 0x0027 +#define EEPROM_MAX_TX_POWER_24GHZ FIELD16(0x00ff) +#define EEPROM_MAX_TX_POWER_5GHZ FIELD16(0xff00) + +/* * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. * This is delta in 40MHZ. * VALUE: Tx Power dalta value (MAX=4) @@ -1926,8 +1999,17 @@ struct mac_iveiv_entry { * FRAG: 1 To inform TKIP engine this is a fragment. * MIMO_PS: The remote peer is in dynamic MIMO-PS mode * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs - * BW: Channel bandwidth 20MHz or 40 MHz + * BW: Channel bandwidth 0:20MHz, 1:40 MHz (for legacy rates this will + * duplicate the frame to both channels). * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED + * AMPDU: 1: this frame is eligible for AMPDU aggregation, the hw will + * aggregate consecutive frames with the same RA and QoS TID. If + * a frame A with the same RA and QoS TID but AMPDU=0 is queued + * directly after a frame B with AMPDU=1, frame A might still + * get aggregated into the AMPDU started by frame B. So, setting + * AMPDU to 0 does _not_ necessarily mean the frame is sent as + * MPDU, it can still end up in an AMPDU if the previous frame + * was tagged as AMPDU. */ #define TXWI_W0_FRAG FIELD32(0x00000001) #define TXWI_W0_MIMO_PS FIELD32(0x00000002) @@ -1945,6 +2027,19 @@ struct mac_iveiv_entry { /* * Word1 + * ACK: 0: No Ack needed, 1: Ack needed + * NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number + * BW_WIN_SIZE: BA windows size of the recipient + * WIRELESS_CLI_ID: Client ID for WCID table access + * MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame + * PACKETID: Will be latched into the TX_STA_FIFO register once the according + * frame was processed. If multiple frames are aggregated together + * (AMPDU==1) the reported tx status will always contain the packet + * id of the first frame. 0: Don't report tx status for this frame. + * PACKETID_QUEUE: Part of PACKETID, This is the queue index (0-3) + * PACKETID_ENTRY: Part of PACKETID, THis is the queue entry index (1-3) + * This identification number is calculated by ((idx % 3) + 1). + * The (+1) is required to prevent PACKETID to become 0. */ #define TXWI_W1_ACK FIELD32(0x00000001) #define TXWI_W1_NSEQ FIELD32(0x00000002) @@ -1952,6 +2047,8 @@ struct mac_iveiv_entry { #define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) #define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) #define TXWI_W1_PACKETID FIELD32(0xf0000000) +#define TXWI_W1_PACKETID_QUEUE FIELD32(0x30000000) +#define TXWI_W1_PACKETID_ENTRY FIELD32(0xc0000000) /* * Word2 diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index b66e0fd8f0fa..5f00e00789d8 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1,4 +1,5 @@ /* + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com> @@ -254,6 +255,23 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2800_mcu_request); +int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i = 0; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + return 0; + msleep(1); + } + + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; +} +EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready); + int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; @@ -367,19 +385,16 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, u32 reg; /* - * Wait for stable hardware. + * If driver doesn't wake up firmware here, + * rt2800_load_firmware will hang forever when interface is up again. */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); + /* + * Wait for stable hardware. + */ + if (rt2800_wait_csr_ready(rt2x00dev)) return -EBUSY; - } if (rt2x00_is_pci(rt2x00dev)) rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); @@ -427,8 +442,10 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2800_load_firmware); -void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) +void rt2800_write_tx_data(struct queue_entry *entry, + struct txentry_desc *txdesc) { + __le32 *txwi = rt2800_drv_get_txwi(entry); u32 word; /* @@ -437,7 +454,8 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) rt2x00_desc_read(txwi, 0, &word); rt2x00_set_field32(&word, TXWI_W0_FRAG, test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, + test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); rt2x00_set_field32(&word, TXWI_W0_TS, test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); @@ -465,7 +483,8 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, txdesc->length); - rt2x00_set_field32(&word, TXWI_W1_PACKETID, txdesc->queue + 1); + rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, txdesc->qid); + rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1); rt2x00_desc_write(txwi, 1, word); /* @@ -478,9 +497,9 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); } -EXPORT_SYMBOL_GPL(rt2800_write_txwi); +EXPORT_SYMBOL_GPL(rt2800_write_tx_data); -static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2) +static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2) { int rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0); int rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1); @@ -490,7 +509,7 @@ static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2) u8 offset1; u8 offset2; - if (rt2x00dev->rx_status.band == IEEE80211_BAND_2GHZ) { + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom); offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0); offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1); @@ -569,6 +588,181 @@ void rt2800_process_rxwi(struct queue_entry *entry, } EXPORT_SYMBOL_GPL(rt2800_process_rxwi); +static bool rt2800_txdone_entry_check(struct queue_entry *entry, u32 reg) +{ + __le32 *txwi; + u32 word; + int wcid, ack, pid; + int tx_wcid, tx_ack, tx_pid; + + wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); + ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); + pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); + + /* + * This frames has returned with an IO error, + * so the status report is not intended for this + * frame. + */ + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) { + rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); + return false; + } + + /* + * Validate if this TX status report is intended for + * this entry by comparing the WCID/ACK/PID fields. + */ + txwi = rt2800_drv_get_txwi(entry); + + rt2x00_desc_read(txwi, 1, &word); + tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); + tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); + tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); + + if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) { + WARNING(entry->queue->rt2x00dev, + "TX status report missed for queue %d entry %d\n", + entry->queue->qid, entry->entry_idx); + rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN); + return false; + } + + return true; +} + +void rt2800_txdone_entry(struct queue_entry *entry, u32 status) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct txdone_entry_desc txdesc; + u32 word; + u16 mcs, real_mcs; + int aggr, ampdu; + __le32 *txwi; + + /* + * Obtain the status about this packet. + */ + txdesc.flags = 0; + txwi = rt2800_drv_get_txwi(entry); + rt2x00_desc_read(txwi, 0, &word); + + mcs = rt2x00_get_field32(word, TXWI_W0_MCS); + ampdu = rt2x00_get_field32(word, TXWI_W0_AMPDU); + + real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS); + aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE); + + /* + * If a frame was meant to be sent as a single non-aggregated MPDU + * but ended up in an aggregate the used tx rate doesn't correlate + * with the one specified in the TXWI as the whole aggregate is sent + * with the same rate. + * + * For example: two frames are sent to rt2x00, the first one sets + * AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0 + * and requests MCS15. If the hw aggregates both frames into one + * AMDPU the tx status for both frames will contain MCS7 although + * the frame was sent successfully. + * + * Hence, replace the requested rate with the real tx rate to not + * confuse the rate control algortihm by providing clearly wrong + * data. + */ + if (aggr == 1 && ampdu == 0 && real_mcs != mcs) { + skbdesc->tx_rate_idx = real_mcs; + mcs = real_mcs; + } + + /* + * Ralink has a retry mechanism using a global fallback + * table. We setup this fallback table to try the immediate + * lower rate for all rates. In the TX_STA_FIFO, the MCS field + * always contains the MCS used for the last transmission, be + * it successful or not. + */ + if (rt2x00_get_field32(status, TX_STA_FIFO_TX_SUCCESS)) { + /* + * Transmission succeeded. The number of retries is + * mcs - real_mcs + */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0); + } else { + /* + * Transmission failed. The number of retries is + * always 7 in this case (for a total number of 8 + * frames sent). + */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + txdesc.retry = rt2x00dev->long_retry; + } + + /* + * the frame was retried at least once + * -> hw used fallback rates + */ + if (txdesc.retry) + __set_bit(TXDONE_FALLBACK, &txdesc.flags); + + rt2x00lib_txdone(entry, &txdesc); +} +EXPORT_SYMBOL_GPL(rt2800_txdone_entry); + +void rt2800_txdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + struct queue_entry *entry; + u32 reg; + u8 pid; + int i; + + /* + * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO + * at most X times and also stop processing once the TX_STA_FIFO_VALID + * flag is not set anymore. + * + * The legacy drivers use X=TX_RING_SIZE but state in a comment + * that the TX_STA_FIFO stack has a size of 16. We stick to our + * tx ring size for now. + */ + for (i = 0; i < TX_ENTRIES; i++) { + rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®); + if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) + break; + + /* + * Skip this entry when it contains an invalid + * queue identication number. + */ + pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE); + if (pid >= QID_RX) + continue; + + queue = rt2x00queue_get_queue(rt2x00dev, pid); + if (unlikely(!queue)) + continue; + + /* + * Inside each queue, we process each entry in a chronological + * order. We first check that the queue is not empty. + */ + entry = NULL; + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + if (rt2800_txdone_entry_check(entry, reg)) + break; + } + + if (!entry || rt2x00queue_empty(queue)) + break; + + rt2800_txdone_entry(entry, reg); + } +} +EXPORT_SYMBOL_GPL(rt2800_txdone); + void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; @@ -600,7 +794,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) /* * Add the TXWI for the beacon to the skb. */ - rt2800_write_txwi((__le32 *)entry->skb->data, txdesc); + rt2800_write_tx_data(entry, txdesc); /* * Dump beacon to userspace through debugfs. @@ -871,8 +1065,12 @@ int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * 1 pairwise key is possible per AID, this means that the AID * equals our hw_key_idx. Make sure the WCID starts _after_ the * last possible shared key entry. + * + * Since parts of the pairwise key table might be shared with + * the beacon frame buffers 6 & 7 we should only write into the + * first 222 entries. */ - if (crypto->aid > (256 - 32)) + if (crypto->aid > (222 - 32)) return -ENOSPC; key->hw_key_idx = 32 + crypto->aid; @@ -975,19 +1173,23 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, } if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); + if (!is_zero_ether_addr((const u8 *)conf->mac)) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + } rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, conf->mac, sizeof(conf->mac)); } if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 3); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 7); - conf->bssid[1] = cpu_to_le32(reg); + if (!is_zero_ether_addr((const u8 *)conf->bssid)) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 3); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 7); + conf->bssid[1] = cpu_to_le32(reg); + } rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, conf->bssid, sizeof(conf->bssid)); @@ -995,38 +1197,149 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, } EXPORT_SYMBOL_GPL(rt2800_config_intf); -void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp) +static void rt2800_config_ht_opmode(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) { + bool any_sta_nongf = !!(erp->ht_opmode & + IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + u8 protection = erp->ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION; + u8 mm20_mode, mm40_mode, gf20_mode, gf40_mode; + u16 mm20_rate, mm40_rate, gf20_rate, gf40_rate; u32 reg; - rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + /* default protection rate for HT20: OFDM 24M */ + mm20_rate = gf20_rate = 0x4004; - rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + /* default protection rate for HT40: duplicate OFDM 24M */ + mm40_rate = gf40_rate = 0x4084; - rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + switch (protection) { + case IEEE80211_HT_OP_MODE_PROTECTION_NONE: + /* + * All STAs in this BSS are HT20/40 but there might be + * STAs not supporting greenfield mode. + * => Disable protection for HT transmissions. + */ + mm20_mode = mm40_mode = gf20_mode = gf40_mode = 0; - rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); - rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + break; + case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: + /* + * All STAs in this BSS are HT20 or HT20/40 but there + * might be STAs not supporting greenfield mode. + * => Protect all HT40 transmissions. + */ + mm20_mode = gf20_mode = 0; + mm40_mode = gf40_mode = 2; - rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); + break; + case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: + /* + * Nonmember protection: + * According to 802.11n we _should_ protect all + * HT transmissions (but we don't have to). + * + * But if cts_protection is enabled we _shall_ protect + * all HT transmissions using a CCK rate. + * + * And if any station is non GF we _shall_ protect + * GF transmissions. + * + * We decide to protect everything + * -> fall through to mixed mode. + */ + case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: + /* + * Legacy STAs are present + * => Protect all HT transmissions. + */ + mm20_mode = mm40_mode = gf20_mode = gf40_mode = 2; - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + /* + * If erp protection is needed we have to protect HT + * transmissions with CCK 11M long preamble. + */ + if (erp->cts_protection) { + /* don't duplicate RTS/CTS in CCK mode */ + mm20_rate = mm40_rate = 0x0003; + gf20_rate = gf40_rate = 0x0003; + } + break; + }; + + /* check for STAs not supporting greenfield mode */ + if (any_sta_nongf) + gf20_mode = gf40_mode = 2; + + /* Update HT protection config */ + rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, mm20_rate); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, mm20_mode); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, mm40_rate); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, mm40_mode); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, gf20_rate); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, gf20_mode); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, gf40_rate); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, gf40_mode); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); +} + +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp, + u32 changed) +{ + u32 reg; + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, + !!erp->short_preamble); + rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, + !!erp->short_preamble); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + } + + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, + erp->cts_protection ? 2 : 0); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + } + + if (changed & BSS_CHANGED_BASIC_RATES) { + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, + erp->basic_rates); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + } + + if (changed & BSS_CHANGED_ERP_SLOT) { + rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, + erp->slot_time); + rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + + rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); + rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); + rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); + } + + if (changed & BSS_CHANGED_BEACON_INT) { + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + + if (changed & BSS_CHANGED_HT) + rt2800_config_ht_opmode(rt2x00dev, erp); } EXPORT_SYMBOL_GPL(rt2800_config_erp); @@ -1120,27 +1433,23 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, * double meaning, and we should set a 7DBm boost flag. */ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); + (info->default_power1 >= 0)); - if (info->tx_power1 < 0) - info->tx_power1 += 7; + if (info->default_power1 < 0) + info->default_power1 += 7; - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1); rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); + (info->default_power2 >= 0)); - if (info->tx_power2 < 0) - info->tx_power2 += 7; + if (info->default_power2 < 0) + info->default_power2 += 7; - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2); } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2); } rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); @@ -1180,13 +1489,11 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1); rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power2)); + rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2); rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); @@ -1210,10 +1517,19 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, unsigned int tx_pin; u8 bbp; + if (rf->channel <= 14) { + info->default_power1 = TXPOWER_G_TO_DEV(info->default_power1); + info->default_power2 = TXPOWER_G_TO_DEV(info->default_power2); + } else { + info->default_power1 = TXPOWER_A_TO_DEV(info->default_power1); + info->default_power2 = TXPOWER_A_TO_DEV(info->default_power2); + } + if (rt2x00_rf(rt2x00dev, RF2020) || rt2x00_rf(rt2x00dev, RF3020) || rt2x00_rf(rt2x00dev, RF3021) || - rt2x00_rf(rt2x00dev, RF3022)) + rt2x00_rf(rt2x00dev, RF3022) || + rt2x00_rf(rt2x00dev, RF3052)) rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info); else rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); @@ -1536,7 +1852,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner); /* * Initialization functions. */ -int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; u16 eeprom; @@ -1728,8 +2044,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, - !rt2x00_is_usb(rt2x00dev)); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); @@ -1886,6 +2201,14 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg); /* + * Do not force the BA window size, we use the TXWI to set it + */ + rt2800_register_read(rt2x00dev, AMPDU_BA_WINSIZE, ®); + rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE, 0); + rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE, 0); + rt2800_register_write(rt2x00dev, AMPDU_BA_WINSIZE, reg); + + /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. @@ -1906,7 +2229,6 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_registers); static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) { @@ -1949,7 +2271,7 @@ static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) return -EACCES; } -int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) { unsigned int i; u16 eeprom; @@ -2044,7 +2366,6 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_bbp); static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40, u8 rfcsr24, u8 filter_target) @@ -2106,7 +2427,7 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, return rfcsr24; } -int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { u8 rfcsr; u8 bbp; @@ -2360,7 +2681,100 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_rfcsr); + +int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 word; + + /* + * Initialize all registers. + */ + if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || + rt2800_init_registers(rt2x00dev) || + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) + return -EIO; + + /* + * Send signal to firmware during boot time. + */ + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + + if (rt2x00_is_usb(rt2x00dev) && + (rt2x00_rt(rt2x00dev, RT3070) || + rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3572))) { + udelay(200); + rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); + udelay(10); + } + + /* + * Enable RX. + */ + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + udelay(50); + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + /* + * Initialize LED control + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + word & 0xff, (word >> 8) & 0xff); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_enable_radio); + +void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + /* Wait for DMA, ignore error */ + rt2800_wait_wpdma_ready(rt2x00dev); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 0); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); +} +EXPORT_SYMBOL_GPL(rt2800_disable_radio); int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev) { @@ -2516,6 +2930,13 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) default_lna_gain); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &word); + if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_24GHZ) == 0xff) + rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_24GHZ, MAX_G_TXPOWER); + if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_5GHZ) == 0xff) + rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_5GHZ, MAX_A_TXPOWER); + rt2x00_eeprom_write(rt2x00dev, EEPROM_MAX_TX_POWER, word); + return 0; } EXPORT_SYMBOL_GPL(rt2800_validate_eeprom); @@ -2755,9 +3176,10 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *tx_power1; - char *tx_power2; + char *default_power1; + char *default_power2; unsigned int i; + unsigned short max_power; u16 eeprom; /* @@ -2770,11 +3192,20 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_AMPDU_AGGREGATION; + /* + * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices + * unless we are capable of sending the buffered frames out after the + * DTIM transmission using rt2x00lib_beacondone. This will send out + * multicast and broadcast traffic immediately instead of buffering it + * infinitly and thus dropping it after some time. + */ + if (!rt2x00_is_usb(rt2x00dev)) + rt2x00dev->hw->flags |= + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -2785,12 +3216,13 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * As rt2800 has a global fallback table we cannot specify * more then one tx rate per frame but since the hw will * try several rates (based on the fallback table) we should - * still initialize max_rates to the maximum number of rates + * initialize max_report_rates to the maximum number of rates * we are going to try. Otherwise mac80211 will truncate our * reported tx rates and the rc algortihm will end up with * incorrect data. */ - rt2x00dev->hw->max_rates = 7; + rt2x00dev->hw->max_rates = 1; + rt2x00dev->hw->max_report_rates = 7; rt2x00dev->hw->max_rate_tries = 1; rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); @@ -2865,27 +3297,32 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Create channel information array */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; spec->channels_info = info; - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); + rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &eeprom); + max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_24GHZ); + default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); + default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); for (i = 0; i < 14; i++) { - info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); + info[i].max_power = max_power; + info[i].default_power1 = TXPOWER_G_FROM_DEV(default_power1[i]); + info[i].default_power2 = TXPOWER_G_FROM_DEV(default_power2[i]); } if (spec->num_channels > 14) { - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); + max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_5GHZ); + default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); + default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); for (i = 14; i < spec->num_channels; i++) { - info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); + info[i].max_power = max_power; + info[i].default_power1 = TXPOWER_A_FROM_DEV(default_power1[i]); + info[i].default_power2 = TXPOWER_A_FROM_DEV(default_power2[i]); } } @@ -3042,8 +3479,12 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, switch (action) { case IEEE80211_AMPDU_RX_START: case IEEE80211_AMPDU_RX_STOP: - /* we don't support RX aggregation yet */ - ret = -ENOTSUPP; + /* + * The hw itself takes care of setting up BlockAck mechanisms. + * So, we only have to allow mac80211 to nagotiate a BlockAck + * agreement. Once that is done, the hw will BlockAck incoming + * AMPDUs without further setup. + */ break; case IEEE80211_AMPDU_TX_START: ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 091641e3c5e2..81cbc92e7857 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -1,4 +1,6 @@ /* + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Bartlomiej Zolnierkiewicz This program is free software; you can redistribute it and/or modify @@ -44,6 +46,7 @@ struct rt2800_ops { int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len); int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev); + __le32 *(*drv_get_txwi)(struct queue_entry *entry); }; static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev, @@ -126,18 +129,32 @@ static inline int rt2800_drv_init_registers(struct rt2x00_dev *rt2x00dev) return rt2800ops->drv_init_registers(rt2x00dev); } +static inline __le32 *rt2800_drv_get_txwi(struct queue_entry *entry) +{ + const struct rt2800_ops *rt2800ops = entry->queue->rt2x00dev->ops->drv; + + return rt2800ops->drv_get_txwi(entry); +} + void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1); +int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev); +int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev); + int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len); int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len); -void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc); +void rt2800_write_tx_data(struct queue_entry *entry, + struct txentry_desc *txdesc); void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc); +void rt2800_txdone(struct rt2x00_dev *rt2x00dev); +void rt2800_txdone_entry(struct queue_entry *entry, u32 status); + void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc); extern const struct rt2x00debug rt2800_rt2x00debug; @@ -153,7 +170,8 @@ void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags); void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, struct rt2x00intf_conf *conf, const unsigned int flags); -void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp); +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp, + u32 changed); void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant); void rt2800_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, @@ -163,10 +181,8 @@ void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, const u32 count); -int rt2800_init_registers(struct rt2x00_dev *rt2x00dev); -int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev); -int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev); -int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev); +int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev); +void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev); int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev); void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 39b3846fa340..b26739535986 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> @@ -196,8 +196,6 @@ static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); - /* * enable Host program ram write selection */ @@ -243,6 +241,7 @@ static void rt2800pci_clear_entry(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; u32 word; if (entry->queue->qid == QID_RX) { @@ -253,6 +252,13 @@ static void rt2800pci_clear_entry(struct queue_entry *entry) rt2x00_desc_read(entry_priv->desc, 1, &word); rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0); rt2x00_desc_write(entry_priv->desc, 1, word); + + /* + * Set RX IDX in register to inform hardware that we have + * handled this entry and it is available for reuse again. + */ + rt2800_register_write(rt2x00dev, RX_CRX_IDX, + entry->entry_idx); } else { rt2x00_desc_read(entry_priv->desc, 1, &word); rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1); @@ -344,24 +350,24 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, } rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask); - rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, 0); + rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, 0); rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask); - rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, 0); + rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, 0); rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask); rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask); rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask); rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask); - rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask); - rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask); - rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, 0); + rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, 0); + rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, 0); rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); } @@ -399,78 +405,18 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev) static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - u16 word; - - /* - * Initialize all registers. - */ if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800pci_init_queues(rt2x00dev) || - rt2800_init_registers(rt2x00dev) || - rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800_init_bbp(rt2x00dev) || - rt2800_init_rfcsr(rt2x00dev))) + rt2800pci_init_queues(rt2x00dev))) return -EIO; - /* - * Send signal to firmware during boot time. - */ - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); - - /* - * Enable RX. - */ - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - /* - * Initialize LED control - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, - word & 0xff, (word >> 8) & 0xff); - - return 0; + return rt2800_enable_radio(rt2x00dev); } static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); + rt2800_disable_radio(rt2x00dev); rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); @@ -486,9 +432,6 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); - - /* Wait for DMA, ignore error */ - rt2800_wait_wpdma_ready(rt2x00dev); } static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -566,21 +509,16 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt2800pci_write_tx_data(struct queue_entry* entry, - struct txentry_desc *txdesc) +static __le32 *rt2800pci_get_txwi(struct queue_entry *entry) { - __le32 *txwi = (__le32 *) entry->skb->data; - - rt2800_write_txwi(txwi, txdesc); + return (__le32 *) entry->skb->data; } - -static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt2800pci_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *txd = entry_priv->desc; u32 word; @@ -600,7 +538,7 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 0, word); rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len); + rt2x00_set_field32(&word, TXD_W1_SD_LEN1, entry->skb->len); rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BURST, @@ -631,41 +569,35 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * TX data initialization */ -static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue_idx) +static void rt2800pci_kick_tx_queue(struct data_queue *queue) { - struct data_queue *queue; - unsigned int idx, qidx = 0; + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; + struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); + unsigned int qidx; - if (queue_idx > QID_HCCA && queue_idx != QID_MGMT) - return; - - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - idx = queue->index[Q_INDEX]; - - if (queue_idx == QID_MGMT) + if (queue->qid == QID_MGMT) qidx = 5; else - qidx = queue_idx; + qidx = queue->qid; - rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); + rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), entry->entry_idx); } -static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid) +static void rt2800pci_kill_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; - if (qid == QID_BEACON) { + if (queue->qid == QID_BEACON) { rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0); return; } rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE)); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK)); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI)); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (queue->qid == QID_AC_BE)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (queue->qid == QID_AC_BK)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (queue->qid == QID_AC_VI)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (queue->qid == QID_AC_VO)); rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); } @@ -675,7 +607,6 @@ static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, static void rt2800pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *rxd = entry_priv->desc; u32 word; @@ -717,127 +648,74 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, * Process the RXWI structure that is at the start of the buffer. */ rt2800_process_rxwi(entry, rxdesc); - - /* - * Set RX IDX in register to inform hardware that we have handled - * this entry and it is available for reuse again. - */ - rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); } /* * Interrupt functions. */ +static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev) +{ + struct ieee80211_conf conf = { .flags = 0 }; + struct rt2x00lib_conf libconf = { .conf = &conf }; + + rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); +} + static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; struct queue_entry *entry; - __le32 *txwi; - struct txdone_entry_desc txdesc; - u32 word; - u32 reg; - int wcid, ack, pid, tx_wcid, tx_ack, tx_pid; - u16 mcs, real_mcs; - int i; - - /* - * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO - * at most X times and also stop processing once the TX_STA_FIFO_VALID - * flag is not set anymore. - * - * The legacy drivers use X=TX_RING_SIZE but state in a comment - * that the TX_STA_FIFO stack has a size of 16. We stick to our - * tx ring size for now. - */ - for (i = 0; i < TX_ENTRIES; i++) { - rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®); - if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) + u32 status; + u8 qid; + + while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) { + /* Now remove the tx status from the FIFO */ + if (kfifo_out(&rt2x00dev->txstatus_fifo, &status, + sizeof(status)) != sizeof(status)) { + WARN_ON(1); break; + } - wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); - ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); - pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); - - /* - * Skip this entry when it contains an invalid - * queue identication number. - */ - if (pid <= 0 || pid > QID_RX) - continue; - - queue = rt2x00queue_get_queue(rt2x00dev, pid - 1); - if (unlikely(!queue)) - continue; - - /* - * Inside each queue, we process each entry in a chronological - * order. We first check that the queue is not empty. - */ - if (rt2x00queue_empty(queue)) - continue; - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - - /* Check if we got a match by looking at WCID/ACK/PID - * fields */ - txwi = (__le32 *) entry->skb->data; - - rt2x00_desc_read(txwi, 1, &word); - tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); - tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); - tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); - - if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) - WARNING(rt2x00dev, "invalid TX_STA_FIFO content\n"); - - /* - * Obtain the status about this packet. - */ - txdesc.flags = 0; - rt2x00_desc_read(txwi, 0, &word); - mcs = rt2x00_get_field32(word, TXWI_W0_MCS); - real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); - - /* - * Ralink has a retry mechanism using a global fallback - * table. We setup this fallback table to try the immediate - * lower rate for all rates. In the TX_STA_FIFO, the MCS field - * always contains the MCS used for the last transmission, be - * it successful or not. - */ - if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) { + qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE); + if (qid >= QID_RX) { /* - * Transmission succeeded. The number of retries is - * mcs - real_mcs + * Unknown queue, this shouldn't happen. Just drop + * this tx status. */ - __set_bit(TXDONE_SUCCESS, &txdesc.flags); - txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0); - } else { + WARNING(rt2x00dev, "Got TX status report with " + "unexpected pid %u, dropping", qid); + break; + } + + queue = rt2x00queue_get_queue(rt2x00dev, qid); + if (unlikely(queue == NULL)) { /* - * Transmission failed. The number of retries is - * always 7 in this case (for a total number of 8 - * frames sent). + * The queue is NULL, this shouldn't happen. Stop + * processing here and drop the tx status */ - __set_bit(TXDONE_FAILURE, &txdesc.flags); - txdesc.retry = 7; + WARNING(rt2x00dev, "Got TX status for an unavailable " + "queue %u, dropping", qid); + break; } - /* - * the frame was retried at least once - * -> hw used fallback rates - */ - if (txdesc.retry) - __set_bit(TXDONE_FALLBACK, &txdesc.flags); + if (rt2x00queue_empty(queue)) { + /* + * The queue is empty. Stop processing here + * and drop the tx status. + */ + WARNING(rt2x00dev, "Got TX status for an empty " + "queue %u, dropping", qid); + break; + } - rt2x00lib_txdone(entry, &txdesc); + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + rt2800_txdone_entry(entry, status); } } -static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev) +static void rt2800pci_txstatus_tasklet(unsigned long data) { - struct ieee80211_conf conf = { .flags = 0 }; - struct rt2x00lib_conf libconf = { .conf = &conf }; - - rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); + rt2800pci_txdone((struct rt2x00_dev *)data); } static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance) @@ -864,13 +742,7 @@ static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance) rt2x00pci_rxdone(rt2x00dev); /* - * 4 - Tx done interrupt. - */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) - rt2800pci_txdone(rt2x00dev); - - /* - * 5 - Auto wakeup interrupt. + * 4 - Auto wakeup interrupt. */ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) rt2800pci_wakeup(rt2x00dev); @@ -882,10 +754,58 @@ static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance) return IRQ_HANDLED; } +static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev) +{ + u32 status; + int i; + + /* + * The TX_FIFO_STATUS interrupt needs special care. We should + * read TX_STA_FIFO but we should do it immediately as otherwise + * the register can overflow and we would lose status reports. + * + * Hence, read the TX_STA_FIFO register and copy all tx status + * reports into a kernel FIFO which is handled in the txstatus + * tasklet. We use a tasklet to process the tx status reports + * because we can schedule the tasklet multiple times (when the + * interrupt fires again during tx status processing). + * + * Furthermore we don't disable the TX_FIFO_STATUS + * interrupt here but leave it enabled so that the TX_STA_FIFO + * can also be read while the interrupt thread gets executed. + * + * Since we have only one producer and one consumer we don't + * need to lock the kfifo. + */ + for (i = 0; i < TX_ENTRIES; i++) { + rt2800_register_read(rt2x00dev, TX_STA_FIFO, &status); + + if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID)) + break; + + if (kfifo_is_full(&rt2x00dev->txstatus_fifo)) { + WARNING(rt2x00dev, "TX status FIFO overrun," + " drop tx status report.\n"); + break; + } + + if (kfifo_in(&rt2x00dev->txstatus_fifo, &status, + sizeof(status)) != sizeof(status)) { + WARNING(rt2x00dev, "TX status FIFO overrun," + "drop tx status report.\n"); + break; + } + } + + /* Schedule the tasklet for processing the tx status. */ + tasklet_schedule(&rt2x00dev->txstatus_tasklet); +} + static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) { struct rt2x00_dev *rt2x00dev = dev_instance; u32 reg; + irqreturn_t ret = IRQ_HANDLED; /* Read status and ACK all interrupts */ rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); @@ -897,15 +817,38 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; - /* Store irqvalue for use in the interrupt thread. */ - rt2x00dev->irqvalue[0] = reg; + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) + rt2800pci_txstatus_interrupt(rt2x00dev); - /* Disable interrupts, will be enabled again in the interrupt thread. */ - rt2x00dev->ops->lib->set_device_state(rt2x00dev, - STATE_RADIO_IRQ_OFF_ISR); + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT) || + rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT) || + rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE) || + rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) { + /* + * All other interrupts are handled in the interrupt thread. + * Store irqvalue for use in the interrupt thread. + */ + rt2x00dev->irqvalue[0] = reg; + + /* + * Disable interrupts, will be enabled again in the + * interrupt thread. + */ + rt2x00dev->ops->lib->set_device_state(rt2x00dev, + STATE_RADIO_IRQ_OFF_ISR); + + /* + * Leave the TX_FIFO_STATUS interrupt enabled to not lose any + * tx status reports. + */ + rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); + rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1); + rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); + ret = IRQ_WAKE_THREAD; + } - return IRQ_WAKE_THREAD; + return ret; } /* @@ -968,6 +911,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags); if (!modparam_nohwcrypt) __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); @@ -1011,11 +955,13 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = { .regbusy_read = rt2x00pci_regbusy_read, .drv_write_firmware = rt2800pci_write_firmware, .drv_init_registers = rt2800pci_init_registers, + .drv_get_txwi = rt2800pci_get_txwi, }; static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .irq_handler = rt2800pci_interrupt, .irq_handler_thread = rt2800pci_interrupt_thread, + .txstatus_tasklet = rt2800pci_txstatus_tasklet, .probe_hw = rt2800pci_probe_hw, .get_firmware_name = rt2800pci_get_firmware_name, .check_firmware = rt2800_check_firmware, @@ -1030,7 +976,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800pci_write_tx_desc, - .write_tx_data = rt2800pci_write_tx_data, + .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, .kick_tx_queue = rt2800pci_kick_tx_queue, .kill_tx_queue = rt2800pci_kill_tx_queue, diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 5a2dfe87c6b6..3dff56ec195a 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> @@ -100,19 +101,6 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, msleep(10); rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - /* - * Send signal to firmware during boot time. - */ - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); - - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3572)) { - udelay(200); - rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); - udelay(10); - } - return 0; } @@ -134,26 +122,18 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; - int i; /* * Wait until BBP and RF are ready. */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); + if (rt2800_wait_csr_ready(rt2x00dev)) return -EBUSY; - } rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); @@ -172,30 +152,10 @@ static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - u16 word; - /* - * Initialize all registers. - */ - if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800_init_registers(rt2x00dev) || - rt2800_init_bbp(rt2x00dev) || - rt2800_init_rfcsr(rt2x00dev))) + if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev))) return -EIO; - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - udelay(50); - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®); rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0); @@ -210,45 +170,12 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg); - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - /* - * Initialize LED control - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, - word & 0xff, (word >> 8) & 0xff); - - return 0; + return rt2800_enable_radio(rt2x00dev); } static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); - - /* Wait for DMA, ignore error */ - rt2800_wait_wpdma_ready(rt2x00dev); - + rt2800_disable_radio(rt2x00dev); rt2x00usb_disable_radio(rt2x00dev); } @@ -320,21 +247,19 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt2800usb_write_tx_data(struct queue_entry* entry, - struct txentry_desc *txdesc) +static __le32 *rt2800usb_get_txwi(struct queue_entry *entry) { - __le32 *txwi = (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE); - - rt2800_write_txwi(txwi, txdesc); + if (entry->queue->qid == QID_BEACON) + return (__le32 *) (entry->skb->data); + else + return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE); } - -static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt2800usb_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - __le32 *txi = (__le32 *) skb->data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + __le32 *txi = (__le32 *) entry->skb->data; u32 word; /* @@ -342,7 +267,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, */ rt2x00_desc_read(txi, 0, &word); rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, - skb->len - TXINFO_DESC_SIZE); + entry->skb->len - TXINFO_DESC_SIZE); rt2x00_set_field32(&word, TXINFO_W0_WIV, !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); @@ -379,6 +304,46 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry) } /* + * TX control handlers + */ +static void rt2800usb_work_txdone(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, txdone_work); + struct data_queue *queue; + struct queue_entry *entry; + + rt2800_txdone(rt2x00dev); + + /* + * Process any trailing TX status reports for IO failures, + * we loop until we find the first non-IO error entry. This + * can either be a frame which is free, is being uploaded, + * or has completed the upload but didn't have an entry + * in the TX_STAT_FIFO register yet. + */ + tx_queue_for_each(rt2x00dev, queue) { + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + break; + + rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); + } + } +} + +static void rt2800usb_kill_tx_queue(struct data_queue *queue) +{ + if (queue->qid == QID_BEACON) + rt2x00usb_register_write(queue->rt2x00dev, BCN_TIME_CFG, 0); + + rt2x00usb_kill_tx_queue(queue); +} + +/* * RX control handlers */ static void rt2800usb_fill_rxdone(struct queue_entry *entry, @@ -514,6 +479,11 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + /* + * Overwrite TX done handler + */ + PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone); + return 0; } @@ -549,6 +519,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = { .regbusy_read = rt2x00usb_regbusy_read, .drv_write_firmware = rt2800usb_write_firmware, .drv_init_registers = rt2800usb_init_registers, + .drv_get_txwi = rt2800usb_get_txwi, }; static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { @@ -566,11 +537,11 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .link_tuner = rt2800_link_tuner, .watchdog = rt2x00usb_watchdog, .write_tx_desc = rt2800usb_write_tx_desc, - .write_tx_data = rt2800usb_write_tx_data, + .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, .get_tx_data_len = rt2800usb_get_tx_data_len, .kick_tx_queue = rt2x00usb_kick_tx_queue, - .kill_tx_queue = rt2x00usb_kill_tx_queue, + .kill_tx_queue = rt2800usb_kill_tx_queue, .fill_rxdone = rt2800usb_fill_rxdone, .config_shared_key = rt2800_config_shared_key, .config_pairwise_key = rt2800_config_pairwise_key, diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index c21af38cc5af..94fe589acfaa 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> <http://rt2x00.serialmonkey.com> @@ -35,6 +36,7 @@ #include <linux/mutex.h> #include <linux/etherdevice.h> #include <linux/input-polldev.h> +#include <linux/kfifo.h> #include <net/mac80211.h> @@ -212,8 +214,9 @@ struct channel_info { unsigned int flags; #define GEOGRAPHY_ALLOWED 0x00000001 - short tx_power1; - short tx_power2; + short max_power; + short default_power1; + short default_power2; }; /* @@ -335,6 +338,11 @@ struct link { /* * Work structure for scheduling periodic watchdog monitoring. + * This work must be scheduled on the kernel workqueue, while + * all other work structures must be queued on the mac80211 + * workqueue. This guarantees that the watchdog can schedule + * other work structures and wait for their completion in order + * to bring the device/driver back into the desired state. */ struct delayed_work watchdog_work; }; @@ -455,6 +463,7 @@ struct rt2x00lib_erp { short eifs; u16 beacon_int; + u16 ht_opmode; }; /* @@ -520,6 +529,11 @@ struct rt2x00lib_ops { irq_handler_t irq_handler_thread; /* + * TX status tasklet handler. + */ + void (*txstatus_tasklet) (unsigned long data); + + /* * Device init handlers. */ int (*probe_hw) (struct rt2x00_dev *rt2x00dev); @@ -558,18 +572,15 @@ struct rt2x00lib_ops { /* * TX control handlers */ - void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, + void (*write_tx_desc) (struct queue_entry *entry, struct txentry_desc *txdesc); void (*write_tx_data) (struct queue_entry *entry, struct txentry_desc *txdesc); void (*write_beacon) (struct queue_entry *entry, struct txentry_desc *txdesc); int (*get_tx_data_len) (struct queue_entry *entry); - void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue); - void (*kill_tx_queue) (struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue); + void (*kick_tx_queue) (struct data_queue *queue); + void (*kill_tx_queue) (struct data_queue *queue); /* * RX control handlers @@ -597,7 +608,8 @@ struct rt2x00lib_ops { #define CONFIG_UPDATE_BSSID ( 1 << 3 ) void (*config_erp) (struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp); + struct rt2x00lib_erp *erp, + u32 changed); void (*config_ant) (struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant); void (*config) (struct rt2x00_dev *rt2x00dev, @@ -651,6 +663,7 @@ enum rt2x00_flags { DRIVER_REQUIRE_DMA, DRIVER_REQUIRE_COPY_IV, DRIVER_REQUIRE_L2PAD, + DRIVER_REQUIRE_TXSTATUS_FIFO, /* * Driver features @@ -698,6 +711,7 @@ struct rt2x00_dev { struct ieee80211_hw *hw; struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; enum ieee80211_band curr_band; + int curr_freq; /* * If enabled, the debugfs interface structures @@ -850,11 +864,6 @@ struct rt2x00_dev { struct ieee80211_low_level_stats low_level_stats; /* - * RX configuration information. - */ - struct ieee80211_rx_status rx_status; - - /* * Scheduled work. * NOTE: intf_work will use ieee80211_iterate_active_interfaces() * which means it cannot be placed on the hw->workqueue @@ -862,6 +871,12 @@ struct rt2x00_dev { */ struct work_struct intf_work; + /** + * Scheduled work for TX/RX done handling (USB devices) + */ + struct work_struct rxdone_work; + struct work_struct txdone_work; + /* * Data queue arrays for RX, TX and Beacon. * The Beacon array also contains the Atim queue @@ -882,6 +897,16 @@ struct rt2x00_dev { * and interrupt thread routine. */ u32 irqvalue[2]; + + /* + * FIFO for storing tx status reports between isr and tasklet. + */ + struct kfifo txstatus_fifo; + + /* + * Tasklet for processing tx status reports (rt2800pci). + */ + struct tasklet_struct txstatus_tasklet; }; /* @@ -1016,17 +1041,15 @@ static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev) /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to map. + * @entry: Pointer to &struct queue_entry */ -void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); +void rt2x00queue_map_txskb(struct queue_entry *entry); /** * rt2x00queue_unmap_skb - Unmap a skb from DMA. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to unmap. + * @entry: Pointer to &struct queue_entry */ -void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); +void rt2x00queue_unmap_skb(struct queue_entry *entry); /** * rt2x00queue_get_queue - Convert queue index to queue pointer @@ -1069,10 +1092,11 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, */ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev); +void rt2x00lib_dmadone(struct queue_entry *entry); void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc); -void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry); +void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status); +void rt2x00lib_rxdone(struct queue_entry *entry); /* * mac80211 handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 953dc4f2c6af..54ffb5aeb34e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -81,7 +81,8 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, - struct ieee80211_bss_conf *bss_conf) + struct ieee80211_bss_conf *bss_conf, + u32 changed) { struct rt2x00lib_erp erp; @@ -102,7 +103,10 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, /* Update global beacon interval time, this is needed for PS support */ rt2x00dev->beacon_int = bss_conf->beacon_int; - rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp); + if (changed & BSS_CHANGED_HT) + erp.ht_opmode = bss_conf->ht_operation_mode; + + rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp, changed); } static inline @@ -126,25 +130,17 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * ANTENNA_SW_DIVERSITY state to the driver. * If that happens, fallback to hardware defaults, * or our own default. - * If diversity handling is active for a particular antenna, - * we shouldn't overwrite that antenna. - * The calls to rt2x00lib_config_antenna_check() - * might have caused that we restore back to the already - * active setting. If that has happened we can quit. */ if (!(ant->flags & ANTENNA_RX_DIVERSITY)) config.rx = rt2x00lib_config_antenna_check(config.rx, def->rx); - else + else if(config.rx == ANTENNA_SW_DIVERSITY) config.rx = active->rx; if (!(ant->flags & ANTENNA_TX_DIVERSITY)) config.tx = rt2x00lib_config_antenna_check(config.tx, def->tx); - else + else if (config.tx == ANTENNA_SW_DIVERSITY) config.tx = active->tx; - if (config.rx == active->rx && config.tx == active->tx) - return; - /* * Antenna setup changes require the RX to be disabled, * else the changes will be ignored by the device. @@ -209,10 +205,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, rt2x00link_reset_tuner(rt2x00dev, false); rt2x00dev->curr_band = conf->channel->band; + rt2x00dev->curr_freq = conf->channel->center_freq; rt2x00dev->tx_power = conf->power_level; rt2x00dev->short_retry = conf->short_frame_max_tx_count; rt2x00dev->long_retry = conf->long_frame_max_tx_count; - - rt2x00dev->rx_status.band = conf->channel->band; - rt2x00dev->rx_status.freq = conf->channel->center_freq; } diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 583dacd8d241..5e9074bf2b8e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -31,15 +31,14 @@ enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) { - switch (key->alg) { - case ALG_WEP: - if (key->keylen == WLAN_KEY_LEN_WEP40) - return CIPHER_WEP64; - else - return CIPHER_WEP128; - case ALG_TKIP: + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + return CIPHER_WEP64; + case WLAN_CIPHER_SUITE_WEP104: + return CIPHER_WEP128; + case WLAN_CIPHER_SUITE_TKIP: return CIPHER_TKIP; - case ALG_CCMP: + case WLAN_CIPHER_SUITE_CCMP: return CIPHER_AES; default: return CIPHER_NONE; @@ -95,7 +94,7 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, overhead += key->iv_len; if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) { - if (key->alg == ALG_TKIP) + if (key->cipher == WLAN_CIPHER_SUITE_TKIP) overhead += 8; } diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index b0498e7e7aae..fcdb6b0dc40f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -315,6 +315,7 @@ static const struct file_operations rt2x00debug_fop_queue_dump = { .poll = rt2x00debug_poll_queue_dump, .open = rt2x00debug_open_queue_dump, .release = rt2x00debug_release_queue_dump, + .llseek = default_llseek, }; static ssize_t rt2x00debug_read_queue_stats(struct file *file, @@ -333,12 +334,12 @@ static ssize_t rt2x00debug_read_queue_stats(struct file *file, if (*offset) return 0; - data = kzalloc(lines * MAX_LINE_LENGTH, GFP_KERNEL); + data = kcalloc(lines, MAX_LINE_LENGTH, GFP_KERNEL); if (!data) return -ENOMEM; temp = data + - sprintf(data, "qid\tcount\tlimit\tlength\tindex\tdone\tcrypto\n"); + sprintf(data, "qid\tcount\tlimit\tlength\tindex\tdma done\tdone\n"); queue_for_each(intf->rt2x00dev, queue) { spin_lock_irqsave(&queue->lock, irqflags); @@ -346,8 +347,8 @@ static ssize_t rt2x00debug_read_queue_stats(struct file *file, temp += sprintf(temp, "%d\t%d\t%d\t%d\t%d\t%d\t%d\n", queue->qid, queue->count, queue->limit, queue->length, queue->index[Q_INDEX], - queue->index[Q_INDEX_DONE], - queue->index[Q_INDEX_CRYPTO]); + queue->index[Q_INDEX_DMA_DONE], + queue->index[Q_INDEX_DONE]); spin_unlock_irqrestore(&queue->lock, irqflags); } @@ -371,6 +372,7 @@ static const struct file_operations rt2x00debug_fop_queue_stats = { .read = rt2x00debug_read_queue_stats, .open = rt2x00debug_file_open, .release = rt2x00debug_file_release, + .llseek = default_llseek, }; #ifdef CONFIG_RT2X00_LIB_CRYPTO @@ -380,7 +382,7 @@ static ssize_t rt2x00debug_read_crypto_stats(struct file *file, loff_t *offset) { struct rt2x00debug_intf *intf = file->private_data; - char *name[] = { "WEP64", "WEP128", "TKIP", "AES" }; + static const char * const name[] = { "WEP64", "WEP128", "TKIP", "AES" }; char *data; char *temp; size_t size; @@ -423,6 +425,7 @@ static const struct file_operations rt2x00debug_fop_crypto_stats = { .read = rt2x00debug_read_crypto_stats, .open = rt2x00debug_file_open, .release = rt2x00debug_file_release, + .llseek = default_llseek, }; #endif @@ -481,6 +484,9 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \ if (index >= debug->__name.word_count) \ return -EINVAL; \ \ + if (length > sizeof(line)) \ + return -EINVAL; \ + \ if (copy_from_user(line, buf, length)) \ return -EFAULT; \ \ @@ -509,6 +515,7 @@ static const struct file_operations rt2x00debug_fop_##__name = {\ .write = rt2x00debug_write_##__name, \ .open = rt2x00debug_file_open, \ .release = rt2x00debug_file_release, \ + .llseek = generic_file_llseek, \ }; RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32); @@ -542,6 +549,7 @@ static const struct file_operations rt2x00debug_fop_dev_flags = { .read = rt2x00debug_read_dev_flags, .open = rt2x00debug_file_open, .release = rt2x00debug_file_release, + .llseek = default_llseek, }; static struct dentry *rt2x00debug_create_file_driver(const char *name, diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 585e8166f22a..5ba79b935f09 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -250,6 +251,13 @@ void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev) } EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt); +void rt2x00lib_dmadone(struct queue_entry *entry) +{ + clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + rt2x00queue_index_inc(entry->queue, Q_INDEX_DMA_DONE); +} +EXPORT_SYMBOL_GPL(rt2x00lib_dmadone); + void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc) { @@ -266,7 +274,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, /* * Unmap the skb. */ - rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + rt2x00queue_unmap_skb(entry); /* * Remove the extra tx headroom from the skb. @@ -383,15 +391,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * send the status report back. */ if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) - /* - * Only PCI and SOC devices process the tx status in process - * context. Hence use ieee80211_tx_status for PCI and SOC - * devices and stick to ieee80211_tx_status_irqsafe for USB. - */ - if (rt2x00_is_usb(rt2x00dev)) - ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb); - else - ieee80211_tx_status(rt2x00dev->hw, entry->skb); + ieee80211_tx_status(rt2x00dev->hw, entry->skb); else dev_kfree_skb_any(entry->skb); @@ -403,7 +403,6 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->ops->lib->clear_entry(entry); - clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); /* @@ -416,65 +415,89 @@ void rt2x00lib_txdone(struct queue_entry *entry, } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); +void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status) +{ + struct txdone_entry_desc txdesc; + + txdesc.flags = 0; + __set_bit(status, &txdesc.flags); + txdesc.retry = 0; + + rt2x00lib_txdone(entry, &txdesc); +} +EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo); + static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev, struct rxdone_entry_desc *rxdesc) { struct ieee80211_supported_band *sband; const struct rt2x00_rate *rate; unsigned int i; - int signal; - int type; + int signal = rxdesc->signal; + int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK); - /* - * For non-HT rates the MCS value needs to contain the - * actually used rate modulation (CCK or OFDM). - */ - if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS) - signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal); - else - signal = rxdesc->signal; - - type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK); - - sband = &rt2x00dev->bands[rt2x00dev->curr_band]; - for (i = 0; i < sband->n_bitrates; i++) { - rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - - if (((type == RXDONE_SIGNAL_PLCP) && - (rate->plcp == signal)) || - ((type == RXDONE_SIGNAL_BITRATE) && - (rate->bitrate == signal)) || - ((type == RXDONE_SIGNAL_MCS) && - (rate->mcs == signal))) { - return i; + switch (rxdesc->rate_mode) { + case RATE_MODE_CCK: + case RATE_MODE_OFDM: + /* + * For non-HT rates the MCS value needs to contain the + * actually used rate modulation (CCK or OFDM). + */ + if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS) + signal = RATE_MCS(rxdesc->rate_mode, signal); + + sband = &rt2x00dev->bands[rt2x00dev->curr_band]; + for (i = 0; i < sband->n_bitrates; i++) { + rate = rt2x00_get_rate(sband->bitrates[i].hw_value); + if (((type == RXDONE_SIGNAL_PLCP) && + (rate->plcp == signal)) || + ((type == RXDONE_SIGNAL_BITRATE) && + (rate->bitrate == signal)) || + ((type == RXDONE_SIGNAL_MCS) && + (rate->mcs == signal))) { + return i; + } } + break; + case RATE_MODE_HT_MIX: + case RATE_MODE_HT_GREENFIELD: + if (signal >= 0 && signal <= 76) + return signal; + break; + default: + break; } WARNING(rt2x00dev, "Frame received with unrecognized signal, " - "signal=0x%.4x, type=%d.\n", signal, type); + "mode=0x%.4x, signal=0x%.4x, type=%d.\n", + rxdesc->rate_mode, signal, type); return 0; } -void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +void rt2x00lib_rxdone(struct queue_entry *entry) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct rxdone_entry_desc rxdesc; struct sk_buff *skb; - struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; + struct ieee80211_rx_status *rx_status; unsigned int header_length; int rate_idx; + + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + goto submit_entry; + /* * Allocate a new sk_buffer. If no new buffer available, drop the * received frame and reuse the existing buffer. */ - skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry); + skb = rt2x00queue_alloc_rxskb(entry); if (!skb) - return; + goto submit_entry; /* * Unmap the skb. */ - rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + rt2x00queue_unmap_skb(entry); /* * Extract the RXD details. @@ -509,57 +532,44 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, skb_trim(entry->skb, rxdesc.size); /* - * Check if the frame was received using HT. In that case, - * the rate is the MCS index and should be passed to mac80211 - * directly. Otherwise we need to translate the signal to - * the correct bitrate index. + * Translate the signal to the correct bitrate index. */ - if (rxdesc.rate_mode == RATE_MODE_CCK || - rxdesc.rate_mode == RATE_MODE_OFDM) { - rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc); - } else { + rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc); + if (rxdesc.rate_mode == RATE_MODE_HT_MIX || + rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD) rxdesc.flags |= RX_FLAG_HT; - rate_idx = rxdesc.signal; - } /* * Update extra components */ rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc); rt2x00debug_update_crypto(rt2x00dev, &rxdesc); + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb); + /* + * Initialize RX status information, and send frame + * to mac80211. + */ + rx_status = IEEE80211_SKB_RXCB(entry->skb); rx_status->mactime = rxdesc.timestamp; + rx_status->band = rt2x00dev->curr_band; + rx_status->freq = rt2x00dev->curr_freq; rx_status->rate_idx = rate_idx; rx_status->signal = rxdesc.rssi; rx_status->flag = rxdesc.flags; rx_status->antenna = rt2x00dev->link.ant.active.rx; - /* - * Send frame to mac80211 & debugfs. - * mac80211 will clean up the skb structure. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb); - memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status)); - - /* - * Currently only PCI and SOC devices handle rx interrupts in process - * context. Hence, use ieee80211_rx_irqsafe for USB and ieee80211_rx_ni - * for PCI and SOC devices. - */ - if (rt2x00_is_usb(rt2x00dev)) - ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb); - else - ieee80211_rx_ni(rt2x00dev->hw, entry->skb); + ieee80211_rx_ni(rt2x00dev->hw, entry->skb); /* * Replace the skb with the freshly allocated one. */ entry->skb = skb; - entry->flags = 0; +submit_entry: rt2x00dev->ops->lib->clear_entry(entry); - rt2x00queue_index_inc(entry->queue, Q_INDEX); + rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); } EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); @@ -710,7 +720,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, for (i = 0; i < spec->num_channels; i++) { rt2x00lib_channel(&channels[i], spec->channels[i].channel, - spec->channels_info[i].tx_power1, i); + spec->channels_info[i].max_power, i); } /* @@ -806,6 +816,30 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE; /* + * Allocate tx status FIFO for driver use. + */ + if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags) && + rt2x00dev->ops->lib->txstatus_tasklet) { + /* + * Allocate txstatus fifo and tasklet, we use a size of 512 + * for the kfifo which is big enough to store 512/4=128 tx + * status reports. In the worst case (tx status for all tx + * queues gets reported before we've got a chance to handle + * them) 24*4=384 tx status reports need to be cached. + */ + status = kfifo_alloc(&rt2x00dev->txstatus_fifo, 512, + GFP_KERNEL); + if (status) + return status; + + /* tasklet for processing the tx status reports. */ + tasklet_init(&rt2x00dev->txstatus_tasklet, + rt2x00dev->ops->lib->txstatus_tasklet, + (unsigned long)rt2x00dev); + + } + + /* * Register HW. */ status = ieee80211_register_hw(rt2x00dev->hw); @@ -902,10 +936,8 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) /* Enable the radio */ retval = rt2x00lib_enable_radio(rt2x00dev); - if (retval) { - rt2x00queue_uninitialize(rt2x00dev); + if (retval) return retval; - } set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags); @@ -1017,6 +1049,18 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) * Stop all work. */ cancel_work_sync(&rt2x00dev->intf_work); + cancel_work_sync(&rt2x00dev->rxdone_work); + cancel_work_sync(&rt2x00dev->txdone_work); + + /* + * Free the tx status fifo. + */ + kfifo_free(&rt2x00dev->txstatus_fifo); + + /* + * Kill the tx status tasklet. + */ + tasklet_kill(&rt2x00dev->txstatus_tasklet); /* * Uninitialize device. diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index b818a43c4672..f0e1eb72befc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -63,6 +63,9 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n", fw->data[fw->size - 4], fw->data[fw->size - 3]); + snprintf(rt2x00dev->hw->wiphy->fw_version, + sizeof(rt2x00dev->hw->wiphy->fw_version), "%d.%d", + fw->data[fw->size - 4], fw->data[fw->size - 3]); retval = rt2x00dev->ops->lib->check_firmware(rt2x00dev, fw->data, fw->size); switch (retval) { diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c index c004cd3a8847..c637bcaec5f8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00ht.c +++ b/drivers/net/wireless/rt2x00/rt2x00ht.c @@ -54,6 +54,17 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, */ if (txrate->flags & IEEE80211_TX_RC_MCS) { txdesc->mcs = txrate->idx; + + /* + * MIMO PS should be set to 1 for STA's using dynamic SM PS + * when using more then one tx stream (>MCS7). + */ + if (tx_info->control.sta && txdesc->mcs > 7 && + ((tx_info->control.sta->ht_cap.cap & + IEEE80211_HT_CAP_SM_PS) >> + IEEE80211_HT_CAP_SM_PS_SHIFT) == + WLAN_HT_CAP_SM_PS_DYNAMIC) + __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags); } else { txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs); if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) @@ -62,9 +73,11 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, /* - * Convert flags + * This frame is eligible for an AMPDU, however, don't aggregate + * frames that are intended to probe a specific tx rate. */ - if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) + if (tx_info->flags & IEEE80211_TX_CTL_AMPDU && + !(tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)) __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags); /* @@ -74,7 +87,13 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, txdesc->rate_mode = RATE_MODE_HT_MIX; if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) txdesc->rate_mode = RATE_MODE_HT_GREENFIELD; - if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + + /* + * Set 40Mhz mode if necessary (for legacy rates this will + * duplicate the frame to both channels). + */ + if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH || + txrate->flags & IEEE80211_TX_RC_DUP_DATA) __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags); if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags); diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index dc5c6574aaf4..619da23b7b56 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -86,7 +86,8 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, const u8 *mac, const u8 *bssid); void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, - struct ieee80211_bss_conf *conf); + struct ieee80211_bss_conf *conf, + u32 changed); void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, struct antenna_setup ant); void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, @@ -99,18 +100,15 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, /** * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @queue: The queue for which the skb will be applicable. + * @entry: The entry for which the skb will be applicable. */ -struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry); +struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry); /** * rt2x00queue_free_skb - free a skb - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to free. + * @entry: The entry for which the skb will be applicable. */ -void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); +void rt2x00queue_free_skb(struct queue_entry *entry); /** * rt2x00queue_align_frame - Align 802.11 frame to 4-byte boundary diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index 666cef3f8472..b971d8798ebf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -188,7 +188,6 @@ static void rt2x00lib_antenna_diversity_eval(struct rt2x00_dev *rt2x00dev) static bool rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev) { struct link_ant *ant = &rt2x00dev->link.ant; - unsigned int flags = ant->flags; /* * Determine if software diversity is enabled for @@ -196,13 +195,13 @@ static bool rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev) * Always perform this check since within the link * tuner interval the configuration might have changed. */ - flags &= ~ANTENNA_RX_DIVERSITY; - flags &= ~ANTENNA_TX_DIVERSITY; + ant->flags &= ~ANTENNA_RX_DIVERSITY; + ant->flags &= ~ANTENNA_TX_DIVERSITY; if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) - flags |= ANTENNA_RX_DIVERSITY; + ant->flags |= ANTENNA_RX_DIVERSITY; if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) - flags |= ANTENNA_TX_DIVERSITY; + ant->flags |= ANTENNA_TX_DIVERSITY; if (!(ant->flags & ANTENNA_RX_DIVERSITY) && !(ant->flags & ANTENNA_TX_DIVERSITY)) { @@ -210,9 +209,6 @@ static bool rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev) return true; } - /* Update flags */ - ant->flags = flags; - /* * If we have only sampled the data over the last period * we should now harvest the data. Otherwise just evaluate @@ -240,6 +236,12 @@ void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; /* + * No need to update the stats for !=STA interfaces + */ + if (!rt2x00dev->intf_sta_count) + return; + + /* * Frame was received successfully since non-succesfull * frames would have been dropped by the hardware. */ @@ -415,8 +417,7 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev) !test_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags)) return; - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->watchdog_work, WATCHDOG_INTERVAL); + schedule_delayed_work(&link->watchdog_work, WATCHDOG_INTERVAL); } void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev) @@ -440,8 +441,7 @@ static void rt2x00link_watchdog(struct work_struct *work) rt2x00dev->ops->lib->watchdog(rt2x00dev); if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->watchdog_work, WATCHDOG_INTERVAL); + schedule_delayed_work(&link->watchdog_work, WATCHDOG_INTERVAL); } void rt2x00link_register(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 235e037e6509..c3c206a97d54 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -669,8 +669,10 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, * When the erp information has changed, we should perform * additional configuration steps. For all other changes we are done. */ - if (changes & ~(BSS_CHANGED_ASSOC | BSS_CHANGED_HT)) - rt2x00lib_config_erp(rt2x00dev, intf, bss_conf); + if (changes & (BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE | + BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BASIC_RATES | + BSS_CHANGED_BEACON_INT | BSS_CHANGED_HT)) + rt2x00lib_config_erp(rt2x00dev, intf, bss_conf, changes); } EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 63c2cc408e15..2449d785cf8d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -84,7 +84,7 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(rt2x00dev, entry); + rt2x00lib_rxdone(entry); } } EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index a3401d301058..e360d287defb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> <http://rt2x00.serialmonkey.com> @@ -32,9 +33,9 @@ #include "rt2x00.h" #include "rt2x00lib.h" -struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct sk_buff *skb; struct skb_frame_desc *skbdesc; unsigned int frame_size; @@ -96,41 +97,42 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, return skb; } -void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +void rt2x00queue_map_txskb(struct queue_entry *entry) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + struct device *dev = entry->queue->rt2x00dev->dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); skbdesc->skb_dma = - dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE); + dma_map_single(dev, entry->skb->data, entry->skb->len, DMA_TO_DEVICE); skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; } EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); -void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +void rt2x00queue_unmap_skb(struct queue_entry *entry) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + struct device *dev = entry->queue->rt2x00dev->dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) { - dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + dma_unmap_single(dev, skbdesc->skb_dma, entry->skb->len, DMA_FROM_DEVICE); skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX; - } - - if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { - dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + } else if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { + dma_unmap_single(dev, skbdesc->skb_dma, entry->skb->len, DMA_TO_DEVICE); skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; } } EXPORT_SYMBOL_GPL(rt2x00queue_unmap_skb); -void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +void rt2x00queue_free_skb(struct queue_entry *entry) { - if (!skb) + if (!entry->skb) return; - rt2x00queue_unmap_skb(rt2x00dev, skb); - dev_kfree_skb_any(skb); + rt2x00queue_unmap_skb(entry); + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; } void rt2x00queue_align_frame(struct sk_buff *skb) @@ -311,7 +313,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* * Initialize information from queue */ - txdesc->queue = entry->queue->qid; + txdesc->qid = entry->queue->qid; txdesc->cw_min = entry->queue->cw_min; txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; @@ -439,7 +441,7 @@ static int rt2x00queue_write_tx_data(struct queue_entry *entry, * Map the skb to DMA. */ if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) - rt2x00queue_map_txskb(rt2x00dev, entry->skb); + rt2x00queue_map_txskb(entry); return 0; } @@ -448,15 +450,14 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) { struct data_queue *queue = entry->queue; - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc); + queue->rt2x00dev->ops->lib->write_tx_desc(entry, txdesc); /* * All processing on the frame has been completed, this means * it is now ready to be dumped to userspace through debugfs. */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb); + rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry->skb); } static void rt2x00queue_kick_tx_queue(struct queue_entry *entry, @@ -476,7 +477,7 @@ static void rt2x00queue_kick_tx_queue(struct queue_entry *entry, */ if (rt2x00queue_threshold(queue) || !test_bit(ENTRY_TXD_BURST, &txdesc->flags)) - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid); + rt2x00dev->ops->lib->kick_tx_queue(queue); } int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, @@ -491,7 +492,8 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, if (unlikely(rt2x00queue_full(queue))) return -ENOBUFS; - if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { + if (unlikely(test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, + &entry->flags))) { ERROR(queue->rt2x00dev, "Arrived at non-free entry in the non-full queue %d.\n" "Please file bug report to %s.\n", @@ -586,11 +588,10 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, /* * Clean up the beacon skb. */ - rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb); - intf->beacon->skb = NULL; + rt2x00queue_free_skb(intf->beacon); if (!enable_beacon) { - rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_BEACON); + rt2x00dev->ops->lib->kill_tx_queue(intf->beacon->queue); mutex_unlock(&intf->beacon_skb_mutex); return 0; } @@ -625,6 +626,51 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, return 0; } +void rt2x00queue_for_each_entry(struct data_queue *queue, + enum queue_index start, + enum queue_index end, + void (*fn)(struct queue_entry *entry)) +{ + unsigned long irqflags; + unsigned int index_start; + unsigned int index_end; + unsigned int i; + + if (unlikely(start >= Q_INDEX_MAX || end >= Q_INDEX_MAX)) { + ERROR(queue->rt2x00dev, + "Entry requested from invalid index range (%d - %d)\n", + start, end); + return; + } + + /* + * Only protect the range we are going to loop over, + * if during our loop a extra entry is set to pending + * it should not be kicked during this run, since it + * is part of another TX operation. + */ + spin_lock_irqsave(&queue->lock, irqflags); + index_start = queue->index[start]; + index_end = queue->index[end]; + spin_unlock_irqrestore(&queue->lock, irqflags); + + /* + * Start from the TX done pointer, this guarentees that we will + * send out all frames in the correct order. + */ + if (index_start < index_end) { + for (i = index_start; i < index_end; i++) + fn(&queue->entries[i]); + } else { + for (i = index_start; i < queue->limit; i++) + fn(&queue->entries[i]); + + for (i = 0; i < index_end; i++) + fn(&queue->entries[i]); + } +} +EXPORT_SYMBOL_GPL(rt2x00queue_for_each_entry); + struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, const enum data_queue_qid queue) { @@ -686,13 +732,13 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) if (queue->index[index] >= queue->limit) queue->index[index] = 0; + queue->last_action[index] = jiffies; + if (index == Q_INDEX) { queue->length++; - queue->last_index = jiffies; } else if (index == Q_INDEX_DONE) { queue->length--; queue->count++; - queue->last_index_done = jiffies; } spin_unlock_irqrestore(&queue->lock, irqflags); @@ -701,14 +747,17 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) static void rt2x00queue_reset(struct data_queue *queue) { unsigned long irqflags; + unsigned int i; spin_lock_irqsave(&queue->lock, irqflags); queue->count = 0; queue->length = 0; - queue->last_index = jiffies; - queue->last_index_done = jiffies; - memset(queue->index, 0, sizeof(queue->index)); + + for (i = 0; i < Q_INDEX_MAX; i++) { + queue->index[i] = 0; + queue->last_action[i] = jiffies; + } spin_unlock_irqrestore(&queue->lock, irqflags); } @@ -718,7 +767,7 @@ void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; txall_queue_for_each(rt2x00dev, queue) - rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, queue->qid); + rt2x00dev->ops->lib->kill_tx_queue(queue); } void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev) @@ -730,9 +779,9 @@ void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00queue_reset(queue); for (i = 0; i < queue->limit; i++) { - queue->entries[i].flags = 0; - rt2x00dev->ops->lib->clear_entry(&queue->entries[i]); + if (queue->qid == QID_RX) + rt2x00queue_index_inc(queue, Q_INDEX); } } } @@ -755,7 +804,7 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue, * Allocate all queue entries. */ entry_size = sizeof(*entries) + qdesc->priv_size; - entries = kzalloc(queue->limit * entry_size, GFP_KERNEL); + entries = kcalloc(queue->limit, entry_size, GFP_KERNEL); if (!entries) return -ENOMEM; @@ -780,8 +829,7 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue, return 0; } -static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) +static void rt2x00queue_free_skbs(struct data_queue *queue) { unsigned int i; @@ -789,19 +837,17 @@ static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev, return; for (i = 0; i < queue->limit; i++) { - if (queue->entries[i].skb) - rt2x00queue_free_skb(rt2x00dev, queue->entries[i].skb); + rt2x00queue_free_skb(&queue->entries[i]); } } -static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) +static int rt2x00queue_alloc_rxskbs(struct data_queue *queue) { unsigned int i; struct sk_buff *skb; for (i = 0; i < queue->limit; i++) { - skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]); + skb = rt2x00queue_alloc_rxskb(&queue->entries[i]); if (!skb) return -ENOMEM; queue->entries[i].skb = skb; @@ -836,7 +882,7 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) goto exit; } - status = rt2x00queue_alloc_rxskbs(rt2x00dev, rt2x00dev->rx); + status = rt2x00queue_alloc_rxskbs(rt2x00dev->rx); if (status) goto exit; @@ -854,7 +900,7 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; - rt2x00queue_free_skbs(rt2x00dev, rt2x00dev->rx); + rt2x00queue_free_skbs(rt2x00dev->rx); queue_for_each(rt2x00dev, queue) { kfree(queue->entries); @@ -891,7 +937,7 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim; - queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL); + queue = kcalloc(rt2x00dev->data_queues, sizeof(*queue), GFP_KERNEL); if (!queue) { ERROR(rt2x00dev, "Queue allocation failed.\n"); return -ENOMEM; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 191e7775a9c0..d81d85f34866 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -268,6 +268,7 @@ struct txdone_entry_desc { * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU. * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth. * @ENTRY_TXD_HT_SHORT_GI: Use short GI. + * @ENTRY_TXD_HT_MIMO_PS: The receiving STA is in dynamic SM PS mode. */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, @@ -286,6 +287,7 @@ enum txentry_desc_flags { ENTRY_TXD_HT_AMPDU, ENTRY_TXD_HT_BW_40, ENTRY_TXD_HT_SHORT_GI, + ENTRY_TXD_HT_MIMO_PS, }; /** @@ -294,7 +296,7 @@ enum txentry_desc_flags { * Summary of information for the frame descriptor before sending a TX frame. * * @flags: Descriptor flags (See &enum queue_entry_flags). - * @queue: Queue identification (See &enum data_queue_qid). + * @qid: Queue identification (See &enum data_queue_qid). * @length: Length of the entire frame. * @header_length: Length of 802.11 header. * @length_high: PLCP length high word. @@ -320,7 +322,7 @@ enum txentry_desc_flags { struct txentry_desc { unsigned long flags; - enum data_queue_qid queue; + enum data_queue_qid qid; u16 length; u16 header_length; @@ -358,17 +360,17 @@ struct txentry_desc { * @ENTRY_OWNER_DEVICE_DATA: This entry is owned by the device for data * transfer (either TX or RX depending on the queue). The entry should * only be touched after the device has signaled it is done with it. - * @ENTRY_OWNER_DEVICE_CRYPTO: This entry is owned by the device for data - * encryption or decryption. The entry should only be touched after - * the device has signaled it is done with it. * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting * for the signal to start sending. + * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured + * while transfering the data to the hardware. No TX status report will + * be expected from the hardware. */ enum queue_entry_flags { ENTRY_BCN_ASSIGNED, ENTRY_OWNER_DEVICE_DATA, - ENTRY_OWNER_DEVICE_CRYPTO, ENTRY_DATA_PENDING, + ENTRY_DATA_IO_FAILED }; /** @@ -399,18 +401,18 @@ struct queue_entry { * * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is * owned by the hardware then the queue is considered to be full. + * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been + * transfered to the hardware. * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by * the hardware and for which we need to run the txdone handler. If this * entry is not owned by the hardware the queue is considered to be empty. - * @Q_INDEX_CRYPTO: Index pointer to the next entry which encryption/decription - * will be completed by the hardware next. * @Q_INDEX_MAX: Keep last, used in &struct data_queue to determine the size * of the index array. */ enum queue_index { Q_INDEX, + Q_INDEX_DMA_DONE, Q_INDEX_DONE, - Q_INDEX_CRYPTO, Q_INDEX_MAX, }; @@ -446,13 +448,12 @@ struct data_queue { enum data_queue_qid qid; spinlock_t lock; - unsigned long last_index; - unsigned long last_index_done; unsigned int count; unsigned short limit; unsigned short threshold; unsigned short length; unsigned short index[Q_INDEX_MAX]; + unsigned long last_action[Q_INDEX_MAX]; unsigned short txop; unsigned short aifs; @@ -565,6 +566,22 @@ struct data_queue_desc { queue_loop(__entry, (__dev)->tx, queue_end(__dev)) /** + * rt2x00queue_for_each_entry - Loop through all entries in the queue + * @queue: Pointer to @data_queue + * @start: &enum queue_index Pointer to start index + * @end: &enum queue_index Pointer to end index + * @fn: The function to call for each &struct queue_entry + * + * This will walk through all entries in the queue, in chronological + * order. This means it will start at the current @start pointer + * and will walk through the queue until it reaches the @end pointer. + */ +void rt2x00queue_for_each_entry(struct data_queue *queue, + enum queue_index start, + enum queue_index end, + void (*fn)(struct queue_entry *entry)); + +/** * rt2x00queue_empty - Check if the queue is empty. * @queue: Queue to check if empty. */ @@ -601,12 +618,23 @@ static inline int rt2x00queue_threshold(struct data_queue *queue) } /** - * rt2x00queue_timeout - Check if a timeout occured for this queue + * rt2x00queue_timeout - Check if a timeout occured for STATUS reorts * @queue: Queue to check. */ static inline int rt2x00queue_timeout(struct data_queue *queue) { - return time_after(queue->last_index, queue->last_index_done + (HZ / 10)); + return time_after(queue->last_action[Q_INDEX_DMA_DONE], + queue->last_action[Q_INDEX_DONE] + (HZ / 10)); +} + +/** + * rt2x00queue_timeout - Check if a timeout occured for DMA transfers + * @queue: Queue to check. + */ +static inline int rt2x00queue_dma_timeout(struct data_queue *queue) +{ + return time_after(queue->last_action[Q_INDEX], + queue->last_action[Q_INDEX_DMA_DONE] + (HZ / 10)); } /** diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index ff3a36622d1b..b3317df7a7d4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -167,137 +168,137 @@ EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read); /* * TX data handlers. */ -static void rt2x00usb_interrupt_txdone(struct urb *urb) +static void rt2x00usb_work_txdone_entry(struct queue_entry *entry) { - struct queue_entry *entry = (struct queue_entry *)urb->context; - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct txdone_entry_desc txdesc; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || - !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) - return; - /* - * Obtain the status about this packet. - * Note that when the status is 0 it does not mean the + * If the transfer to hardware succeeded, it does not mean the * frame was send out correctly. It only means the frame * was succesfully pushed to the hardware, we have no * way to determine the transmission status right now. * (Only indirectly by looking at the failed TX counters * in the register). */ - txdesc.flags = 0; - if (!urb->status) - __set_bit(TXDONE_UNKNOWN, &txdesc.flags); + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); else - __set_bit(TXDONE_FAILURE, &txdesc.flags); - txdesc.retry = 0; - - rt2x00lib_txdone(entry, &txdesc); + rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN); } -static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry) +static void rt2x00usb_work_txdone(struct work_struct *work) { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); - struct queue_entry_priv_usb *entry_priv = entry->priv_data; - u32 length; + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, txdone_work); + struct data_queue *queue; + struct queue_entry *entry; - if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) { - /* - * USB devices cannot blindly pass the skb->len as the - * length of the data to usb_fill_bulk_urb. Pass the skb - * to the driver to determine what the length should be. - */ - length = rt2x00dev->ops->lib->get_tx_data_len(entry); + tx_queue_for_each(rt2x00dev, queue) { + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - usb_fill_bulk_urb(entry_priv->urb, usb_dev, - usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint), - entry->skb->data, length, - rt2x00usb_interrupt_txdone, entry); + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + break; - usb_submit_urb(entry_priv->urb, GFP_ATOMIC); + rt2x00usb_work_txdone_entry(entry); + } } } -void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid) +static void rt2x00usb_interrupt_txdone(struct urb *urb) { - struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid); - unsigned long irqflags; - unsigned int index; - unsigned int index_done; - unsigned int i; + struct queue_entry *entry = (struct queue_entry *)urb->context; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + + if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + return; /* - * Only protect the range we are going to loop over, - * if during our loop a extra entry is set to pending - * it should not be kicked during this run, since it - * is part of another TX operation. + * Report the frame as DMA done */ - spin_lock_irqsave(&queue->lock, irqflags); - index = queue->index[Q_INDEX]; - index_done = queue->index[Q_INDEX_DONE]; - spin_unlock_irqrestore(&queue->lock, irqflags); + rt2x00lib_dmadone(entry); /* - * Start from the TX done pointer, this guarentees that we will - * send out all frames in the correct order. + * Check if the frame was correctly uploaded */ - if (index_done < index) { - for (i = index_done; i < index; i++) - rt2x00usb_kick_tx_entry(&queue->entries[i]); - } else { - for (i = index_done; i < queue->limit; i++) - rt2x00usb_kick_tx_entry(&queue->entries[i]); + if (urb->status) + set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); - for (i = 0; i < index; i++) - rt2x00usb_kick_tx_entry(&queue->entries[i]); - } + /* + * Schedule the delayed work for reading the TX status + * from the device. + */ + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->txdone_work); } -EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue); -void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid) +static void rt2x00usb_kick_tx_entry(struct queue_entry *entry) { - struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid); - struct queue_entry_priv_usb *entry_priv; - struct queue_entry_priv_usb_bcn *bcn_priv; - unsigned int i; - bool kill_guard; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); + struct queue_entry_priv_usb *entry_priv = entry->priv_data; + u32 length; + + if (!test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) + return; /* - * When killing the beacon queue, we must also kill - * the beacon guard byte. + * USB devices cannot blindly pass the skb->len as the + * length of the data to usb_fill_bulk_urb. Pass the skb + * to the driver to determine what the length should be. */ - kill_guard = - (qid == QID_BEACON) && - (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)); + length = rt2x00dev->ops->lib->get_tx_data_len(entry); + + usb_fill_bulk_urb(entry_priv->urb, usb_dev, + usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint), + entry->skb->data, length, + rt2x00usb_interrupt_txdone, entry); + + if (usb_submit_urb(entry_priv->urb, GFP_ATOMIC)) { + set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); + rt2x00lib_dmadone(entry); + } +} + +void rt2x00usb_kick_tx_queue(struct data_queue *queue) +{ + rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX, + rt2x00usb_kick_tx_entry); +} +EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue); + +static void rt2x00usb_kill_tx_entry(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct queue_entry_priv_usb *entry_priv = entry->priv_data; + struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; + + if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + return; + + usb_kill_urb(entry_priv->urb); /* - * Cancel all entries. + * Kill guardian urb (if required by driver). */ - for (i = 0; i < queue->limit; i++) { - entry_priv = queue->entries[i].priv_data; - usb_kill_urb(entry_priv->urb); + if ((entry->queue->qid == QID_BEACON) && + (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))) + usb_kill_urb(bcn_priv->guardian_urb); +} - /* - * Kill guardian urb (if required by driver). - */ - if (kill_guard) { - bcn_priv = queue->entries[i].priv_data; - usb_kill_urb(bcn_priv->guardian_urb); - } - } +void rt2x00usb_kill_tx_queue(struct data_queue *queue) +{ + rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX, + rt2x00usb_kill_tx_entry); } EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue); -static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue) +static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue) { - struct queue_entry_priv_usb *entry_priv; + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; unsigned short threshold = queue->threshold; - WARNING(queue->rt2x00dev, "TX queue %d timed out, invoke reset", queue->qid); + WARNING(queue->rt2x00dev, "TX queue %d DMA timed out," + " invoke forced forced reset", queue->qid); /* * Temporarily disable the TX queue, this will force mac80211 @@ -307,20 +308,33 @@ static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue) * queue from being enabled during the txdone handler. */ queue->threshold = queue->limit; - ieee80211_stop_queue(queue->rt2x00dev->hw, queue->qid); + ieee80211_stop_queue(rt2x00dev->hw, queue->qid); /* - * Reset all currently uploaded TX frames. + * Kill all entries in the queue, afterwards we need to + * wait a bit for all URBs to be cancelled. */ - while (!rt2x00queue_empty(queue)) { - entry_priv = rt2x00queue_get_entry(queue, Q_INDEX_DONE)->priv_data; - usb_kill_urb(entry_priv->urb); + rt2x00usb_kill_tx_queue(queue); - /* - * We need a short delay here to wait for - * the URB to be canceled and invoked the tx_done handler. - */ - udelay(200); + /* + * In case that a driver has overriden the txdone_work + * function, we invoke the TX done through there. + */ + rt2x00dev->txdone_work.func(&rt2x00dev->txdone_work); + + /* + * Security measure: if the driver did override the + * txdone_work function, and the hardware did arrive + * in a state which causes it to malfunction, it is + * possible that the driver couldn't handle the txdone + * event correctly. So after giving the driver the + * chance to cleanup, we now force a cleanup of any + * leftovers. + */ + if (!rt2x00queue_empty(queue)) { + WARNING(queue->rt2x00dev, "TX queue %d DMA timed out," + " status handling failed, invoke hard reset", queue->qid); + rt2x00usb_work_txdone(&rt2x00dev->txdone_work); } /* @@ -328,7 +342,15 @@ static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue) * queue again. */ queue->threshold = threshold; - ieee80211_wake_queue(queue->rt2x00dev->hw, queue->qid); + ieee80211_wake_queue(rt2x00dev->hw, queue->qid); +} + +static void rt2x00usb_watchdog_tx_status(struct data_queue *queue) +{ + WARNING(queue->rt2x00dev, "TX queue %d status timed out," + " invoke forced tx handler", queue->qid); + + ieee80211_queue_work(queue->rt2x00dev->hw, &queue->rt2x00dev->txdone_work); } void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev) @@ -336,8 +358,12 @@ void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; tx_queue_for_each(rt2x00dev, queue) { - if (rt2x00queue_timeout(queue)) - rt2x00usb_watchdog_reset_tx(queue); + if (!rt2x00queue_empty(queue)) { + if (rt2x00queue_dma_timeout(queue)) + rt2x00usb_watchdog_tx_dma(queue); + if (rt2x00queue_timeout(queue)) + rt2x00usb_watchdog_tx_status(queue); + } } } EXPORT_SYMBOL_GPL(rt2x00usb_watchdog); @@ -345,38 +371,62 @@ EXPORT_SYMBOL_GPL(rt2x00usb_watchdog); /* * RX data handlers. */ +static void rt2x00usb_work_rxdone(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, rxdone_work); + struct queue_entry *entry; + struct skb_frame_desc *skbdesc; + u8 rxd[32]; + + while (!rt2x00queue_empty(rt2x00dev->rx)) { + entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE); + + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + break; + + /* + * Fill in desc fields of the skb descriptor + */ + skbdesc = get_skb_frame_desc(entry->skb); + skbdesc->desc = rxd; + skbdesc->desc_len = entry->queue->desc_size; + + /* + * Send the frame to rt2x00lib for further processing. + */ + rt2x00lib_rxdone(entry); + } +} + static void rt2x00usb_interrupt_rxdone(struct urb *urb) { struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - u8 rxd[32]; - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || - !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* - * Check if the received data is simply too small - * to be actually valid, or if the urb is signaling - * a problem. + * Report the frame as DMA done */ - if (urb->actual_length < entry->queue->desc_size || urb->status) { - set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_submit_urb(urb, GFP_ATOMIC); - return; - } + rt2x00lib_dmadone(entry); /* - * Fill in desc fields of the skb descriptor + * Check if the received data is simply too small + * to be actually valid, or if the urb is signaling + * a problem. */ - skbdesc->desc = rxd; - skbdesc->desc_len = entry->queue->desc_size; + if (urb->actual_length < entry->queue->desc_size || urb->status) + set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); /* - * Send the frame to rt2x00lib for further processing. + * Schedule the delayed work for reading the RX status + * from the device. */ - rt2x00lib_rxdone(rt2x00dev, entry); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work); } /* @@ -391,7 +441,7 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) * The USB version of kill_tx_queue also works * on the RX queue. */ - rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_RX); + rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev->rx); } EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); @@ -405,6 +455,8 @@ void rt2x00usb_clear_entry(struct queue_entry *entry) struct queue_entry_priv_usb *entry_priv = entry->priv_data; int pipe; + entry->flags = 0; + if (entry->queue->qid == QID_RX) { pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint); usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe, @@ -412,9 +464,10 @@ void rt2x00usb_clear_entry(struct queue_entry *entry) rt2x00usb_interrupt_rxdone, entry); set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_submit_urb(entry_priv->urb, GFP_ATOMIC); - } else { - entry->flags = 0; + if (usb_submit_urb(entry_priv->urb, GFP_ATOMIC)) { + set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); + rt2x00lib_dmadone(entry); + } } } EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry); @@ -489,9 +542,9 @@ static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev) return 0; } -static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) +static int rt2x00usb_alloc_entries(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; struct queue_entry_priv_usb *entry_priv; struct queue_entry_priv_usb_bcn *bcn_priv; unsigned int i; @@ -508,7 +561,7 @@ static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, * no guardian byte was required for the beacon, * then we are done. */ - if (rt2x00dev->bcn != queue || + if (queue->qid != QID_BEACON || !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) return 0; @@ -522,9 +575,9 @@ static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, return 0; } -static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) +static void rt2x00usb_free_entries(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; struct queue_entry_priv_usb *entry_priv; struct queue_entry_priv_usb_bcn *bcn_priv; unsigned int i; @@ -543,7 +596,7 @@ static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, * no guardian byte was required for the beacon, * then we are done. */ - if (rt2x00dev->bcn != queue || + if (queue->qid != QID_BEACON || !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) return; @@ -570,7 +623,7 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) * Allocate DMA */ queue_for_each(rt2x00dev, queue) { - status = rt2x00usb_alloc_urb(rt2x00dev, queue); + status = rt2x00usb_alloc_entries(queue); if (status) goto exit; } @@ -589,7 +642,7 @@ void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; queue_for_each(rt2x00dev, queue) - rt2x00usb_free_urb(rt2x00dev, queue); + rt2x00usb_free_entries(queue); } EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); @@ -659,6 +712,9 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); + INIT_WORK(&rt2x00dev->rxdone_work, rt2x00usb_work_rxdone); + INIT_WORK(&rt2x00dev->txdone_work, rt2x00usb_work_txdone); + retval = rt2x00usb_alloc_reg(rt2x00dev); if (retval) goto exit_free_device; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index d3d3ddc40875..c2d997f67b3e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -379,25 +379,21 @@ struct queue_entry_priv_usb_bcn { /** * rt2x00usb_kick_tx_queue - Kick data queue - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @qid: Data queue to kick + * @queue: Data queue to kick * * This will walk through all entries of the queue and push all pending * frames to the hardware as a single burst. */ -void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid); +void rt2x00usb_kick_tx_queue(struct data_queue *queue); /** * rt2x00usb_kill_tx_queue - Kill data queue - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @qid: Data queue to kill + * @queue: Data queue to kill * * This will walk through all entries of the queue and kill all * previously kicked frames before they can be send. */ -void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid); +void rt2x00usb_kill_tx_queue(struct data_queue *queue); /** * rt2x00usb_watchdog - Watchdog for USB communication diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index e539c6cb636f..af548c87f108 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -594,7 +594,8 @@ static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, } static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) + struct rt2x00lib_erp *erp, + u32 changed) { u32 reg; @@ -603,28 +604,36 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); - rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!erp->short_preamble); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, + !!erp->short_preamble); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); + } - rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates); + if (changed & BSS_CHANGED_BASIC_RATES) + rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, + erp->basic_rates); - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + if (changed & BSS_CHANGED_BEACON_INT) { + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + } - rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); - rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); + if (changed & BSS_CHANGED_ERP_SLOT) { + rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); + rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); - rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); - rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); + rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); + rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); + rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); + rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); + } } static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, @@ -1050,7 +1059,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev, /* * Determine r17 bounds. */ - if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { @@ -1645,6 +1654,7 @@ static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); rt2x00_set_field32(®, INT_MASK_CSR_TXDONE, mask); rt2x00_set_field32(®, INT_MASK_CSR_RXDONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_BEACON_DONE, mask); rt2x00_set_field32(®, INT_MASK_CSR_ENABLE_MITIGATION, mask); rt2x00_set_field32(®, INT_MASK_CSR_MITIGATION_PERIOD, 0xff); rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); @@ -1658,6 +1668,7 @@ static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, MCU_INT_MASK_CSR_5, mask); rt2x00_set_field32(®, MCU_INT_MASK_CSR_6, mask); rt2x00_set_field32(®, MCU_INT_MASK_CSR_7, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_TWAKEUP, mask); rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); } @@ -1766,12 +1777,11 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt61pci_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *txd = entry_priv->desc; u32 word; @@ -1779,7 +1789,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->qid); rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); @@ -1802,15 +1812,15 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, } rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid); + rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid); rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, skbdesc->entry->entry_idx); rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(rt2x00dev->tx_power)); + TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); - if (txdesc->queue != QID_BEACON) { + if (txdesc->qid != QID_BEACON) { rt2x00_desc_read(txd, 6, &word); rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, skbdesc->skb_dma); @@ -1857,7 +1867,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, */ skbdesc->desc = txd; skbdesc->desc_len = - (txdesc->queue == QID_BEACON) ? TXINFO_SIZE : TXD_DESC_SIZE; + (txdesc->qid == QID_BEACON) ? TXINFO_SIZE : TXD_DESC_SIZE; } /* @@ -1882,7 +1892,7 @@ static void rt61pci_write_beacon(struct queue_entry *entry, /* * Write the TX descriptor for the beacon. */ - rt61pci_write_tx_desc(rt2x00dev, entry->skb, txdesc); + rt61pci_write_tx_desc(entry, txdesc); /* * Dump beacon to userspace through debugfs. @@ -1918,34 +1928,34 @@ static void rt61pci_write_beacon(struct queue_entry *entry, entry->skb = NULL; } -static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue) +static void rt61pci_kick_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue->qid == QID_AC_BE)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue->qid == QID_AC_BK)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, (queue->qid == QID_AC_VI)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue->qid == QID_AC_VO)); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } -static void rt61pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid) +static void rt61pci_kill_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; - if (qid == QID_BEACON) { + if (queue->qid == QID_BEACON) { rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); return; } rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, (qid == QID_AC_BE)); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, (qid == QID_AC_BK)); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, (qid == QID_AC_VI)); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, (qid == QID_AC_VO)); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, (queue->qid == QID_AC_BE)); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, (queue->qid == QID_AC_BK)); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, (queue->qid == QID_AC_VI)); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, (queue->qid == QID_AC_VO)); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } @@ -1972,7 +1982,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return 0; } - if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { if (lna == 3 || lna == 2) offset += 10; } @@ -2107,11 +2117,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) "TX status report missed for entry %d\n", entry_done->entry_idx); - txdesc.flags = 0; - __set_bit(TXDONE_UNKNOWN, &txdesc.flags); - txdesc.retry = 0; - - rt2x00lib_txdone(entry_done, &txdesc); + rt2x00lib_txdone_noinfo(entry_done, TXDONE_UNKNOWN); entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); } @@ -2624,12 +2630,13 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * As rt61 has a global fallback table we cannot specify * more then one tx rate per frame but since the hw will * try several rates (based on the fallback table) we should - * still initialize max_rates to the maximum number of rates + * initialize max_report_rates to the maximum number of rates * we are going to try. Otherwise mac80211 will truncate our * reported tx rates and the rc algortihm will end up with * incorrect data. */ - rt2x00dev->hw->max_rates = 7; + rt2x00dev->hw->max_rates = 1; + rt2x00dev->hw->max_report_rates = 7; rt2x00dev->hw->max_rate_tries = 1; /* @@ -2654,20 +2661,24 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Create channel information array */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; spec->channels_info = info; tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + for (i = 0; i < 14; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } if (spec->num_channels > 14) { tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 14; i < spec->num_channels; i++) - info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + for (i = 14; i < spec->num_channels; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } } return 0; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index aa9de18fd410..9be8089317e4 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -545,7 +545,8 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, } static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) + struct rt2x00lib_erp *erp, + u32 changed) { u32 reg; @@ -554,28 +555,36 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!erp->short_preamble); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, + !!erp->short_preamble); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); + } - rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates); + if (changed & BSS_CHANGED_BASIC_RATES) + rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, + erp->basic_rates); - rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); + if (changed & BSS_CHANGED_BEACON_INT) { + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); + } - rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); - rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); + if (changed & BSS_CHANGED_ERP_SLOT) { + rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); + rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); - rt2x00usb_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); - rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg); + rt2x00usb_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); + rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); + rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); + rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg); + } } static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, @@ -929,7 +938,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev, /* * Determine r17 bounds. */ - if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; @@ -1426,12 +1435,11 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt73usb_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - __le32 *txd = (__le32 *) skb->data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + __le32 *txd = (__le32 *) entry->skb->data; u32 word; /* @@ -1464,7 +1472,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 0, word); rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->qid); rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); @@ -1487,7 +1495,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(rt2x00dev->tx_power)); + TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); @@ -1526,7 +1534,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry, /* * Write the TX descriptor for the beacon. */ - rt73usb_write_tx_desc(rt2x00dev, entry->skb, txdesc); + rt73usb_write_tx_desc(entry, txdesc); /* * Dump beacon to userspace through debugfs. @@ -1574,6 +1582,14 @@ static int rt73usb_get_tx_data_len(struct queue_entry *entry) return length; } +static void rt73usb_kill_tx_queue(struct data_queue *queue) +{ + if (queue->qid == QID_BEACON) + rt2x00usb_register_write(queue->rt2x00dev, TXRX_CSR9, 0); + + rt2x00usb_kill_tx_queue(queue); +} + /* * RX control handlers */ @@ -1597,7 +1613,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return 0; } - if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { if (lna == 3 || lna == 2) offset += 10; @@ -2047,9 +2063,14 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize all hw fields. + * + * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING unless we are + * capable of sending the buffered frames out after the DTIM + * transmission using rt2x00lib_beacondone. This will send out + * multicast and broadcast traffic immediately instead of buffering it + * infinitly and thus dropping it after some time. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; @@ -2084,20 +2105,24 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Create channel information array */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; spec->channels_info = info; tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + for (i = 0; i < 14; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } if (spec->num_channels > 14) { tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 14; i < spec->num_channels; i++) - info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + for (i = 14; i < spec->num_channels; i++) { + info[i].max_power = MAX_TXPOWER; + info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); + } } return 0; @@ -2259,7 +2284,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .write_beacon = rt73usb_write_beacon, .get_tx_data_len = rt73usb_get_tx_data_len, .kick_tx_queue = rt2x00usb_kick_tx_queue, - .kill_tx_queue = rt2x00usb_kill_tx_queue, + .kill_tx_queue = rt73usb_kill_tx_queue, .fill_rxdone = rt73usb_fill_rxdone, .config_shared_key = rt73usb_config_shared_key, .config_pairwise_key = rt73usb_config_pairwise_key, @@ -2345,6 +2370,7 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0411, 0x0137), USB_DEVICE_DATA(&rt73usb_ops) }, /* CEIVA */ { USB_DEVICE(0x178d, 0x02be), USB_DEVICE_DATA(&rt73usb_ops) }, /* CNet */ |